From 7791a827ab4493f737773a04df57d80f060ea067 Mon Sep 17 00:00:00 2001
From: bryansj <40634870+bryansj@users.noreply.github.com>
Date: Wed, 18 Dec 2019 09:28:03 -0500
Subject: [PATCH] Update Readme.md

---
 .../klipper/bryansj/Readme.md                 | 56 +++++++------------
 1 file changed, 19 insertions(+), 37 deletions(-)

diff --git a/firmware_configurations/klipper/bryansj/Readme.md b/firmware_configurations/klipper/bryansj/Readme.md
index a4eb32483..ab200a632 100644
--- a/firmware_configurations/klipper/bryansj/Readme.md
+++ b/firmware_configurations/klipper/bryansj/Readme.md
@@ -1,39 +1,21 @@
 This is my modded version of Eddie's SKR Klipper config file.
 
-Voron Design VORON2.2 V2.291 300mm SKR 1.3 TMC2209 UART config
-
-Based on Eddie's template and guide from:
-
-github.com/VoronDesign/VoronUsers/tree/master/firmware_configurations/klipper/eddie
-
-with the following adjustments and additions from bryansj:
-
-  RepRapDiscount 128x64 Full Graphic Smart Controller
-
-  Nozzle Wipe
-
-      added to G32
-
-  Prime Line
-
-  Extended QGL corner points
-
-  Bed Meshing (Commented Out)
-
-  TL Filament Run-out Sensor
-
-  Chamber Temperature Thermistor (in Z vertical Chain)
-
-      linked to Back Panel Exhaust fan 
-
-  Force Move Enabled
-
-  Pause/Resume Enabled
-
-  Homing IF/THEN to omit unneeded homing operations
-
-  M117 LCD Text Added *16 Characters Max
-
-  Expanded LCD Menu Options for Voron/Klipper Commands
-  
-      Quad Gantry Level, Firmware_Restart, TESTZ Offsetting
\ No newline at end of file
+* Voron Design VORON2.2 V2.291 300mm SKR 1.3 TMC2209 UART config
+* Based on Eddie's template and guide from:
+* github.com/VoronDesign/VoronUsers/tree/master/firmware_configurations/klipper/eddie
+* with the following adjustments and additions from bryansj:
+*   RepRapDiscount 128x64 Full Graphic Smart Controller
+*   Nozzle Wipe
+*       added to G32
+*   Prime Line
+*   Extended QGL corner points
+*   Bed Meshing (Commented Out)
+*   TL Filament Run-out Sensor
+*   Chamber Temperature Thermistor (in Z vertical Chain)
+*       linked to Back Panel Exhaust fan 
+*   Force Move Enabled
+*   Pause/Resume Enabled
+*   Homing IF/THEN to omit unneeded homing operations
+*   M117 LCD Text Added *16 Characters Max
+*   Expanded LCD Menu Options for Voron/Klipper Commands
+*       Quad Gantry Level, Firmware_Restart, TESTZ Offsetting
\ No newline at end of file