Add Mini Afterburner Strain Relief (#326)

printer_mods/Andre/Mini_Afterburner_Strain_Relief/README.md

@@ -0,0 +1,30 @@
+Mini Afterburner Strain Relief
+==============================
+
+Replaces the stock strain relief on the V0 Mini Afterburner toolhead.  
+
+
+BOM
+---
+
+- 1x M3x6 BHCS
+- 2x M3x30 BHCS
+- 2x M3 Nuts
+- 1x M3 heat-set insert. (3x5x4)
+
+
+Instructions
+------------
+
+- Install the M3 heat-set insert into the top of `Strain_Relief_Body_x1`.  
+- Use the M3x6 BHCS to attach the `Strain_Relief_Body_Top_x1` to the `Strain_Relief_Body_x1`
+- Insert the 2 M3x30 screws from the front of the toolhead, through the motor, `Strain_Relief_Spacer_x2` and `Strain_Relief_Body_x1` finally securing them with M3 nuts on the back of the strain relief.
+- wires can be routed between the motor and the strain relief, through the recessed area.
+
+
+Images
+------
+
+![CAD](Images/CAD_1.png)
+![CAD](Images/CAD_2.png)
+![CAD](Images/CAD_3.png)

printer_mods/README.md

@@ -39,6 +39,7 @@ like so:
 | |[Analog Timer Mount](./al3ph/analog_timer_mount)|A skirt mount for analog timer |:heavy_check_mark:|:x:|:x:|:x:|
 | |[Filament Runout Sensor](./al3ph/filament_runout)|A simple filament runout sensor |:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|
 | |[PL05 Sensor Mount](./al3ph/pl05_mount)|A mount PL05 inductive sensor |:heavy_check_mark:|:x:|:x:|:x:|
+|Andre|[Mini Afterburner Strain Relief](./Andre/Mini_Afterburner_Strain_Relief)|A replacement strain relief for the Mini Afterburner toolhead|:heavy_check_mark:|:x:|:x:|:x:|
 |arkeet|[Dial test indicator mount](./arkeet/dti-mount)|A toolhead mount for a dial test indicator, where the tip is located at the nozzle. |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:|
 | |[Magnetic hotend fan cover](./arkeet/magnet-fan-cover)|A replacement hotend fan cover, held with magnets instead of screws. |:x:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|
 | |[MGN12 X-axis](./arkeet/mgn12/)|Replaces the dual MGN9H rails with a single MGN12H. |:x:|:x:|:heavy_check_mark:|:x:|