diff --git a/printer_mods/README.md b/printer_mods/README.md
index ecdccbc31..cc39f58e7 100644
--- a/printer_mods/README.md
+++ b/printer_mods/README.md
@@ -34,5 +34,9 @@ like so:
 |StvPtrsn |[Skirts for a 320mm Build](./StvPtrsn/320mm_Build) |Skirts for a 320mm build |:x: |:x: |:heavy_check_mark: |
 | |[Keystone Jack for Filtered Mains Panel](./StvPtrsn/Keystone_Jack_Filtered_Mains_Panel) |Add a keystone jack to your filtered mains plug panel |:x: |:x: |:heavy_check_mark: |
 | |[Side Fan Support, No Tape](./StvPtrsn/Side_Fan_Support_No_Tape) |Mount the 60mm side fans and inserts without tape |:x: |:x: |:heavy_check_mark: |
+| tameike | [Din Rail SKR 90 deg](./tameike/DIN_Rail_SKR_1.3_90deg) | SKR V1.3 bracket turned 90 degrees | :x: | :grey_question: | :heavy_check_mark: |
+| | [Din Rail 2020 Holder](./tameike/DIN_Rail_2020_holder) | Attaching DIN Rails to 2020 | :x: | :grey_question: | :heavy_check_mark: |
+| | [TacoRaven Mounting Frame](./tameike/V0_TR_Mounting_Frame) | TR V0 mount | :heavy_check_mark: | :x: | :x: |
 | xbst_ | [PCB LED Holder](./xbst_/LED_Holder)| Very simple mount for some (?) PCB LED Bars | :x: |:grey_question: |:heavy_check_mark: |
+
 ---
diff --git a/printer_mods/tameike/DIN_Rail_2020_holder/DIN rail 2020 holder.f3d b/printer_mods/tameike/DIN_Rail_2020_holder/DIN rail 2020 holder.f3d
new file mode 100644
index 000000000..e22c8c838
Binary files /dev/null and b/printer_mods/tameike/DIN_Rail_2020_holder/DIN rail 2020 holder.f3d differ
diff --git a/printer_mods/tameike/DIN_Rail_2020_holder/DIN rail 2020 holder.stl b/printer_mods/tameike/DIN_Rail_2020_holder/DIN rail 2020 holder.stl
new file mode 100644
index 000000000..1aa777ec4
Binary files /dev/null and b/printer_mods/tameike/DIN_Rail_2020_holder/DIN rail 2020 holder.stl differ
diff --git a/printer_mods/tameike/DIN_Rail_2020_holder/Readme.md b/printer_mods/tameike/DIN_Rail_2020_holder/Readme.md
new file mode 100644
index 000000000..a996d1569
--- /dev/null
+++ b/printer_mods/tameike/DIN_Rail_2020_holder/Readme.md
@@ -0,0 +1,8 @@
+Purpose:
+attaching DIN RAIL with 25mm inner width to 2020 rails
+
+Why:
+You can avoid attaching DIN rails to the bed and easily move/adjust them - specially on smaller ones.
+
+What else:
+From Voron with love!
diff --git a/printer_mods/tameike/DIN_Rail_SKR_1.3_90deg/Readme.md b/printer_mods/tameike/DIN_Rail_SKR_1.3_90deg/Readme.md
new file mode 100644
index 000000000..ed1a90dd5
--- /dev/null
+++ b/printer_mods/tameike/DIN_Rail_SKR_1.3_90deg/Readme.md
@@ -0,0 +1,8 @@
+Purpose:
+Turning SKR V1.3 90 degrees on a DIN rail. Standard base is used.
+
+Why:
+To optimize space/electronics arrangement.
+
+What else:
+From Voron with love!
diff --git a/printer_mods/tameike/DIN_Rail_SKR_1.3_90deg/SKR 1.3 Bracket 90deg.stl b/printer_mods/tameike/DIN_Rail_SKR_1.3_90deg/SKR 1.3 Bracket 90deg.stl
new file mode 100644
index 000000000..3392395fa
Binary files /dev/null and b/printer_mods/tameike/DIN_Rail_SKR_1.3_90deg/SKR 1.3 Bracket 90deg.stl differ
diff --git a/printer_mods/tameike/V0_TR_Mounting_Frame/Readme.md b/printer_mods/tameike/V0_TR_Mounting_Frame/Readme.md
new file mode 100644
index 000000000..6b18b9e04
--- /dev/null
+++ b/printer_mods/tameike/V0_TR_Mounting_Frame/Readme.md
@@ -0,0 +1,8 @@
+Purpose:
+attaching TacoRaven Board to the backside of a V0
+
+Why:
+Because you need it if you a Taco lover.
+
+What else:
+From Voron with love!
diff --git a/printer_mods/tameike/V0_TR_Mounting_Frame/V0_TacoRaven_Mounting_Frame.stl b/printer_mods/tameike/V0_TR_Mounting_Frame/V0_TacoRaven_Mounting_Frame.stl
new file mode 100644
index 000000000..f7306bb4b
Binary files /dev/null and b/printer_mods/tameike/V0_TR_Mounting_Frame/V0_TacoRaven_Mounting_Frame.stl differ