Updating magnetic panels mod with new STLs, renaming for consistency and clarity (#835)

* Create README.md

* Create README.md

* Create README.md

* Adding STLs

Adding STLs for corner and mid panel clips in 4mm and 6mm variations, magnet inserts and unhammer, installation jig.

* Delete README.md

* Delete README.md

* Adding README.md content

Description and photos.

* Create README.md

* Adding images

* Create README.md

* Create README.md

* Update README.md

Initial content with description and images

* Create README.md

* Create README.md

* Adding images for Magnetic Panel mod

* Update README.md

* Adding STLs for Magnetic Panels with Magnet Inserts

* Delete printer_mods/Le0n/OV5648 Mount directory

* Delete README.md

* Create README.md

* Add files via upload

* Delete README.md

* Adding Le0n/Magnetic_Panels_with_Magnet_Inserts

* Delete printer_mods/leang directory

* Update README.md

* Upated STL and README

Added Magnet-Insert-Side.stl for easier printing.

* Update README.md

* Add files via upload

Adding slightly taller variant.

* Renaming file for consistency

Renaming file for consistency

* Delete README.md

* Adding updated STLs

V2 STLs for magnetic insert, unhammer nut, and new flat head unhammer nut

* Renaming CAD files for clarity

* Updating with V2 STLs

Improved strength on weak joints, adjusted fitment, providing alternative flathead nuts. Renaming for consistency.

printer_mods/Le0n/Magnetic_Panels_with_Magnet_Inserts/README.md

@@ -2,6 +2,13 @@
 
 ## Magnetic Panels with Magnet Inserts
 
+Update 10/03/22: Adding a few alternative STLs.
+
+* New V2 magnetic insert has been beefed up to resist cracking when used with stronger/N52 magnets. The retaining layer has been thickened slightly, though the extra plastic between magnets means a slight reduction in magnetic pull. These updated V2 magnetic inserts can be printed on their sides without bridging.
+* New V2 unhmamer nut to go with the V2 magnetic inserts.
+* Alternative V2 unhammer nut that uses a flat head screwdriver rather than a hex key. This will hopefully help with people who are experiencing rounding out with the hex version.
+* If using V2 magnetic inserts, please use V2 unhammer nuts for proper fitment.
+
 There are various panel latches and magnetic clips that offer quick panel removal for swapping between enclosed- and open-chamber printing, but I wanted to fix a few of the pain points that I ran into with some of the existing mods.
 
 * Does not require a lot of filament. The corner and mid-panel clips were modeled after the stock Trident panel clips and are similarly hollowed, saving filament and print time.