From 6c6ab96df520c60de3bc1577bfe80ff3643bf8e7 Mon Sep 17 00:00:00 2001 From: Ryan Wilson Date: Tue, 19 Oct 2021 08:18:20 -0400 Subject: [PATCH] Include heatset inserts and required mount screws (#492) These are required but not mentioned in the BOM. The mount mentioned says 8mm M3 screws are required but I found those to be too short, so I mentioned 10-12mm. Happy to change it if preferred. --- printer_mods/alanho/BTT_PITFT50_v2_Mount/README.md | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/printer_mods/alanho/BTT_PITFT50_v2_Mount/README.md b/printer_mods/alanho/BTT_PITFT50_v2_Mount/README.md index 26244a616..fa8cc51cc 100644 --- a/printer_mods/alanho/BTT_PITFT50_v2_Mount/README.md +++ b/printer_mods/alanho/BTT_PITFT50_v2_Mount/README.md @@ -8,7 +8,9 @@ This work is based on [sttts's Waveshare 5.5inch mount](../../sttts/Waveshare-5. ## BOM -- 4x M3x6mm +- 4x M3 Heatset Inserts +- 4x M3x6mm to attach to the mount +- 3x M3x10-12mm to attach the mount to the frame - 4x M2.5x4mm (included in the BTT PITFT50 v2) - 500mm ~ 600mm Ribbon Flat Cable for Raspberry Pi Camera (depends on the position of the Raspberry Pi. The included one is too short)