Add BTT PITFT50 v2 Touch Display Mount (#338)

* Add BTT PITFT50 v2 Mount

* remove spaces in filenames

* Chamfer to screw holes and add links to sttts's mod for the mount

printer_mods/README.md

@@ -34,6 +34,7 @@ like so:
 ||[Raspberry Pi DIN mount](./aeresov/Raspberry_Pi_DIN_mount)|A bracket for Raspberry Pi 3/4 to mount it onto DIN rail, along or across.|:x:|:grey_question:|:heavy_check_mark:|
 ||[SKR 1.3/1.4 DIN mount](./aeresov/SKR_DIN_mount)|A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or across.|:x:|:grey_question:|:heavy_check_mark:|
 ||[cable tie DIN mount](./aeresov/cable_tie_DIN_mount)|A bracket for cable ties to route cables across DIN rails.|:x:|:grey_question:|:heavy_check_mark:|
+|alanho|[BTT PITFT50 v2 Mount](./alanho/BTT_PITFT50_v2_Mount)|A mount for the BTT PITFT50 v2 Touch Display |:x:|:grey_question:|:heavy_check_mark:|:x:|
 |albert|[IKEA Dioder Led Mount](./albert/IKEA_Dioder_Led_Mount)|A mount for the IKEA Dioder LED strip | :grey_question: | :grey_question: | :heavy_check_mark: |:x:|
 |al3ph|[LED Mount](./al3ph/led_mount)|A mount for 10mm LED WS2812 strips |:heavy_check_mark:|:x:|:x:|:x:|
 | |[Analog Timer Mount](./al3ph/analog_timer_mount)|A skirt mount for analog timer |:heavy_check_mark:|:x:|:x:|:x:|

printer_mods/alanho/BTT_PITFT50_v2_Mount/README.md

@@ -0,0 +1,21 @@
+# BTT PITFT50 v2 Mount
+
+This work is based on [sttts's Waveshare 5.5inch mount](../../sttts/Waveshare-5.5-inch-HDMI-AMOLED). BTT PITFT50 v2 has a different layout than v1, featuing a brightless thumbwheel, an orientation switch and a JST XH port for unknown function. This design provide accessibility to the thumbwheel and switch.
+
+![Test](images/IMG_6447.jpg)
+![Test](images/IMG_6451.jpg)
+![Test](images/f360.jpg)
+
+## BOM
+
+- 4x M3x6mm
+- 4x M2.5x4mm (included in the BTT PITFT50 v2)
+- 500mm ~ 600mm Ribbon Flat Cable for Raspberry Pi Camera (depends on the position of the Raspberry Pi. The included one is too short)
+
+## Instructions
+
+Please use the [mount in sttts's mods](../../sttts/Waveshare-5.5-inch-HDMI-AMOLED/STLs/Voron-2.4-Mount-Generisch-v6.stl) to amount this to the frame. No re-print of skirts is required!
+
+## Print Settings
+
+Standard Voron recommended print settings