From 68a2a19e87ea272d48be07f72de30fd8f2d1e648 Mon Sep 17 00:00:00 2001 From: Trippinonaduck Date: Sun, 17 Nov 2019 17:03:27 -0600 Subject: [PATCH] SwitchHolder --- printer_mods/README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/printer_mods/README.md b/printer_mods/README.md index a269260ae..eda81230c 100644 --- a/printer_mods/README.md +++ b/printer_mods/README.md @@ -89,7 +89,7 @@ If your mod is lacking a column in the compatibility matrix, feel free to submit | |[LED Mount](./synfinatic/LED-Mount) |Mount for LED lightbars |:grey_question: |:heavy_check_mark: |:heavy_check_mark: | | | [PS Extra Bracket](./synfinatic/PS-Extra-Bracket)|Extra bracket to keep the power supply in place |:grey_question: |:grey_question: |:grey_question: | | |[RJ45 Mount](./synfinatic/RJ45-Mount) |Mount for an ethernet coupler to extend / move the ethernet plug somewhere more convenient |:grey_question: |:grey_question: |:grey_question: | -|Trippinonaduck |[Switch Holder](.Trippinonaduck/SwitchHolder/) | Holder for Anit-Vandal Switches mounted in skirt holes | :x:|:heavy_check_mark: | :heavy_check_mark:| +|Trippinonaduck |[Switch Holder](.Trippinonaduck/SwitchHolder) | Holder for Anit-Vandal Switches mounted in skirt holes | :x:|:heavy_check_mark: | :heavy_check_mark:| |warriorofwire | [Openbuilds Drag Chain](./warriorofwire/openbuilds_drag_chain)|Collection of models for using an off-the-shelf, cheap, snap opening drag chain for gantry wiring and protecting wires down to the deck |:x: | :heavy_check_mark: | :x: | | | [Direct Drive BMG-m mount](./warriorofwire/bmg_direct_drive)| Open toolhead mounting plans for Bondtech BMG-m and Mosquito direct drive combo|:grey_question: |:heavy_check_mark:|:grey_question: | | wile.e.coyote| [Coroplast Support](./wile.e.coyote)|Support for the coroplast to prevent sagging | :x: |:heavy_check_mark: |:grey_question: |