Rename kageurufu to frankaf (#863)

Co-authored-by: Frank Tackitt <git@frank.af>

printer_mods/frankaf/mgn12-euclid/README.md

@@ -1,27 +1,27 @@
-Afterburner MGN12 Carriage with Integrated Euclid Probe
-=======================================================
-
-Euclid Probe by [nionio6915 (Github)](https://github.com/nionio6915/Euclid_Probe), https://www.euclidprobe.com/
-
-![Printed mount](./Images/real-bottomview.jpg)
-
-This is a modified version of the MGN12 carriage for a Voron Trident or modded Voron 2.4 with a cutout for mounting the upper Euclid PCB. 
-
-![CAD view of the Euclid Probe embedded in the carriage](Images/CAD-bottomview.png)
-
-Other than requiring a Euclid Probe, the only additional parts needed for the MGN12 carriage are two M3 heatset inserts for mounting the upper PCB. 
-
-When installed, the Euclid's magnets should barely protrude from the bottom of the carriage.
-
-![Front view, showing magnets](./Images/CAD-frontview.png)
-
-The JST connector should be easily accessible from above
-
-![Front view, printed](./Images/real-frontview.jpg)
-
-### Probe Dock
-
-The Euclid Probe project has Voron docks available on 
-[euclidprobe.com](https://www.euclidprobe.com/02-probe-docks-toolboard-mounts/), under "Mounts & Docks by Printers" > "Voron 2.4 / Voron Trident"
-
+Afterburner MGN12 Carriage with Integrated Euclid Probe
+=======================================================
+
+Euclid Probe by [nionio6915 (Github)](https://github.com/nionio6915/Euclid_Probe), https://www.euclidprobe.com/
+
+![Printed mount](./Images/real-bottomview.jpg)
+
+This is a modified version of the MGN12 carriage for a Voron Trident or modded Voron 2.4 with a cutout for mounting the upper Euclid PCB. 
+
+![CAD view of the Euclid Probe embedded in the carriage](Images/CAD-bottomview.png)
+
+Other than requiring a Euclid Probe, the only additional parts needed for the MGN12 carriage are two M3 heatset inserts for mounting the upper PCB. 
+
+When installed, the Euclid's magnets should barely protrude from the bottom of the carriage.
+
+![Front view, showing magnets](./Images/CAD-frontview.png)
+
+The JST connector should be easily accessible from above
+
+![Front view, printed](./Images/real-frontview.jpg)
+
+### Probe Dock
+
+The Euclid Probe project has Voron docks available on 
+[euclidprobe.com](https://www.euclidprobe.com/02-probe-docks-toolboard-mounts/), under "Mounts & Docks by Printers" > "Voron 2.4 / Voron Trident"
+
 The available docks mount to the bed rails, removing the probe from the motion plane after moving up in the Z axis. Adjustment should be performed to move the dock along your maximum Y position to avoid errant pickups as much as possible.