diff --git a/printer_mods/README.md b/printer_mods/README.md index 2bee7c3d7..299c54870 100644 --- a/printer_mods/README.md +++ b/printer_mods/README.md @@ -163,6 +163,9 @@ like so: | tayto-chip | [V2.4 Skirt Switch Mod](./tayto-chip/skirt_switch_mod) | Add a ON/OFF Switch to side or front skirts| :x: | :x: | :heavy_check_mark: |:x:| |teookie|[AB_dial_indicator_mount](./teookie/AB_dial_indicator_mount)|Mount for attaching standard dial indicators to AB|:x:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:| | | [SKR_Brace](./teookie/skr_brace)|Rigidize and stabilize SKR 1.4 mounts|:x:|:x:|:heavy_check_mark:|:x:| +|Tircown| [Display mount 5"](./Tircown/Display_mount_5inch) | Tiltable mount for a 5" tactile display | :x: | :x: | :heavy_check_mark: | :x: | +| | [Raspberry in plug panel](./Tircown/Raspberry_plug_panel) | Raspberry mount vertically in the plug panel, allow easy access to ports | :x: | :x: | :heavy_check_mark: | :x: | +| | [DIN mount RS-15-5 PSU](./Tircown/DIN_mount_RS-15-5) | A DIN mount for the RS-15-5 | :grey_question: | :grey_question: | :heavy_check_mark: | :grey_question: | | togi | [Exhaust housing side fitting](./togi/exhaust_housing_side_fitting) | Moves the exhaust housing bowden fitting 90 degrees to allow the printer to stand closer to a wall | :x: | :x: | :heavy_check_mark: |:x:| | warriorofwire | [Slenderfan for Afterburner](./warriorofwire/slenderfan) | Lighter, quieter, smaller Afterburner | :x: | :x: | :heavy_check_mark: |:x:| | Weaslus | [Electronics Bay and Enclosure Seperator](./Weaslus/Electronics-Bay-Seperator) | Better enclose chamber and keep heat from electronics | :heavy_check_mark: | :x: | :x: |:x:| diff --git a/printer_mods/Tircown/DIN_mount_RS-15-5/DIN_Meanwell_RS-15-5_psu.stl b/printer_mods/Tircown/DIN_mount_RS-15-5/DIN_Meanwell_RS-15-5_psu.stl new file mode 100644 index 000000000..e0c45552a Binary files /dev/null and b/printer_mods/Tircown/DIN_mount_RS-15-5/DIN_Meanwell_RS-15-5_psu.stl differ diff --git a/printer_mods/Tircown/DIN_mount_RS-15-5/README.md b/printer_mods/Tircown/DIN_mount_RS-15-5/README.md new file mode 100644 index 000000000..44cfebbb8 --- /dev/null +++ b/printer_mods/Tircown/DIN_mount_RS-15-5/README.md @@ -0,0 +1 @@ +DIN support for MeanwWell PSU RS-15-5 \ No newline at end of file diff --git a/printer_mods/Tircown/Display_mount_5inch/Images/Capture.JPG b/printer_mods/Tircown/Display_mount_5inch/Images/Capture.JPG new file mode 100644 index 000000000..37d28d0c9 Binary files /dev/null and b/printer_mods/Tircown/Display_mount_5inch/Images/Capture.JPG differ diff --git a/printer_mods/Tircown/Display_mount_5inch/Images/image0.jpg b/printer_mods/Tircown/Display_mount_5inch/Images/image0.jpg new file mode 100644 index 000000000..a5d9a9b5d Binary files /dev/null and b/printer_mods/Tircown/Display_mount_5inch/Images/image0.jpg differ diff --git a/printer_mods/Tircown/Display_mount_5inch/Images/image1.jpg b/printer_mods/Tircown/Display_mount_5inch/Images/image1.jpg new file mode 100644 index 000000000..1e9cf1da3 Binary files /dev/null and b/printer_mods/Tircown/Display_mount_5inch/Images/image1.jpg differ diff --git a/printer_mods/Tircown/Display_mount_5inch/Images/image3.jpg b/printer_mods/Tircown/Display_mount_5inch/Images/image3.jpg new file mode 100644 index 000000000..10a4c88f9 Binary files /dev/null and b/printer_mods/Tircown/Display_mount_5inch/Images/image3.jpg differ diff --git a/printer_mods/Tircown/Display_mount_5inch/README.md b/printer_mods/Tircown/Display_mount_5inch/README.md new file mode 100644 index 000000000..5e7cb6422 --- /dev/null +++ b/printer_mods/Tircown/Display_mount_5inch/README.md @@ -0,0 +1,26 @@ +# Voron 2.4 5" display tilting support +**Many thanks to Jo_Thingiverse for having tested this mount.** + +### Bill Of Materials +* Screen 5" 800*480 IPS TFT MIPI DSI Multi-Touch Capacitive Touch Panel LCD Module Display Monitor Screen for Raspberry Pi +* optional SD extender or microSD extender +* 2 M3x15 +* 6(+4) M3x8 +* 6 M3 threaded inserts +* 2 M3 hammered nuts + +### Instructions +1. Put one M3 threaded insert in each arm end. +2. Put four M3 threaded insert in the back of the screen case. +3. Remove the built-in support in the fork of both arms. +4. Install the two slides with M3x8. +5. Use two pieces of filament as hinges. +6. Adjust the tension of the screws that pass through the slides to keep the position. +7. The optional installation of the SD extender requires four self tapping M3x8. + +**Since the screen is larger than the original piece you will have to replace your sides skirts. These are included too.** + +![CAD](Images/Capture.JPG) +![photo1](Images/image0.jpg) +![photo2](Images/image1.jpg) +![photo3](Images/image3.jpg) \ No newline at end of file diff --git a/printer_mods/Tircown/Display_mount_5inch/display5inch_arm_a.stl b/printer_mods/Tircown/Display_mount_5inch/display5inch_arm_a.stl new file mode 100644 index 000000000..1226b9f3f Binary files /dev/null and b/printer_mods/Tircown/Display_mount_5inch/display5inch_arm_a.stl differ diff --git a/printer_mods/Tircown/Display_mount_5inch/display5inch_arm_b.stl b/printer_mods/Tircown/Display_mount_5inch/display5inch_arm_b.stl new file mode 100644 index 000000000..eae6166b9 Binary files /dev/null and b/printer_mods/Tircown/Display_mount_5inch/display5inch_arm_b.stl differ diff --git a/printer_mods/Tircown/Display_mount_5inch/display5inch_case.stl b/printer_mods/Tircown/Display_mount_5inch/display5inch_case.stl new file mode 100644 index 000000000..4f6035d8d Binary files /dev/null and b/printer_mods/Tircown/Display_mount_5inch/display5inch_case.stl differ diff --git a/printer_mods/Tircown/Display_mount_5inch/display5inch_case_moretolerance.stl b/printer_mods/Tircown/Display_mount_5inch/display5inch_case_moretolerance.stl new file mode 100644 index 000000000..365ce63ae Binary files /dev/null and b/printer_mods/Tircown/Display_mount_5inch/display5inch_case_moretolerance.stl differ diff --git a/printer_mods/Tircown/Display_mount_5inch/display5inch_front_rear_skirt_a_250.stl b/printer_mods/Tircown/Display_mount_5inch/display5inch_front_rear_skirt_a_250.stl new file mode 100644 index 000000000..fe6d21c1b Binary files /dev/null and b/printer_mods/Tircown/Display_mount_5inch/display5inch_front_rear_skirt_a_250.stl differ diff --git a/printer_mods/Tircown/Display_mount_5inch/display5inch_front_rear_skirt_a_300.stl b/printer_mods/Tircown/Display_mount_5inch/display5inch_front_rear_skirt_a_300.stl new file mode 100644 index 000000000..dc9d42ee2 Binary files /dev/null and b/printer_mods/Tircown/Display_mount_5inch/display5inch_front_rear_skirt_a_300.stl differ diff --git a/printer_mods/Tircown/Display_mount_5inch/display5inch_front_rear_skirt_a_350.stl b/printer_mods/Tircown/Display_mount_5inch/display5inch_front_rear_skirt_a_350.stl new file mode 100644 index 000000000..bf93be1c9 Binary files /dev/null and b/printer_mods/Tircown/Display_mount_5inch/display5inch_front_rear_skirt_a_350.stl differ diff --git a/printer_mods/Tircown/Display_mount_5inch/display5inch_front_rear_skirt_b_250.stl b/printer_mods/Tircown/Display_mount_5inch/display5inch_front_rear_skirt_b_250.stl new file mode 100644 index 000000000..8b22cff53 Binary files /dev/null and b/printer_mods/Tircown/Display_mount_5inch/display5inch_front_rear_skirt_b_250.stl differ diff --git a/printer_mods/Tircown/Display_mount_5inch/display5inch_front_rear_skirt_b_300.stl b/printer_mods/Tircown/Display_mount_5inch/display5inch_front_rear_skirt_b_300.stl new file mode 100644 index 000000000..e4f654c28 Binary files /dev/null and b/printer_mods/Tircown/Display_mount_5inch/display5inch_front_rear_skirt_b_300.stl differ diff --git a/printer_mods/Tircown/Display_mount_5inch/display5inch_front_rear_skirt_b_350.stl b/printer_mods/Tircown/Display_mount_5inch/display5inch_front_rear_skirt_b_350.stl new file mode 100644 index 000000000..bf93be1c9 Binary files /dev/null and b/printer_mods/Tircown/Display_mount_5inch/display5inch_front_rear_skirt_b_350.stl differ diff --git a/printer_mods/Tircown/Display_mount_5inch/display5inch_optional_microsd_holder.stl b/printer_mods/Tircown/Display_mount_5inch/display5inch_optional_microsd_holder.stl new file mode 100644 index 000000000..31ae19087 Binary files /dev/null and b/printer_mods/Tircown/Display_mount_5inch/display5inch_optional_microsd_holder.stl differ diff --git a/printer_mods/Tircown/Display_mount_5inch/display5inch_optional_sd_holder.stl b/printer_mods/Tircown/Display_mount_5inch/display5inch_optional_sd_holder.stl new file mode 100644 index 000000000..33f327a97 Binary files /dev/null and b/printer_mods/Tircown/Display_mount_5inch/display5inch_optional_sd_holder.stl differ diff --git a/printer_mods/Tircown/Display_mount_5inch/display5inch_slide_x2.stl b/printer_mods/Tircown/Display_mount_5inch/display5inch_slide_x2.stl new file mode 100644 index 000000000..cdede205d Binary files /dev/null and b/printer_mods/Tircown/Display_mount_5inch/display5inch_slide_x2.stl differ diff --git a/printer_mods/Tircown/Raspberry_plug_panel/Images/image0.jpg b/printer_mods/Tircown/Raspberry_plug_panel/Images/image0.jpg new file mode 100644 index 000000000..0145be2a6 Binary files /dev/null and b/printer_mods/Tircown/Raspberry_plug_panel/Images/image0.jpg differ diff --git a/printer_mods/Tircown/Raspberry_plug_panel/Images/image1.jpg b/printer_mods/Tircown/Raspberry_plug_panel/Images/image1.jpg new file mode 100644 index 000000000..35ba14b0e Binary files /dev/null and b/printer_mods/Tircown/Raspberry_plug_panel/Images/image1.jpg differ diff --git a/printer_mods/Tircown/Raspberry_plug_panel/Images/image2.jpg b/printer_mods/Tircown/Raspberry_plug_panel/Images/image2.jpg new file mode 100644 index 000000000..545cf5096 Binary files /dev/null and b/printer_mods/Tircown/Raspberry_plug_panel/Images/image2.jpg differ diff --git a/printer_mods/Tircown/Raspberry_plug_panel/plug_panel_raspberry_bracket.stl b/printer_mods/Tircown/Raspberry_plug_panel/plug_panel_raspberry_bracket.stl new file mode 100644 index 000000000..2b9c668c7 Binary files /dev/null and b/printer_mods/Tircown/Raspberry_plug_panel/plug_panel_raspberry_bracket.stl differ diff --git a/printer_mods/Tircown/Raspberry_plug_panel/plug_panel_with_raspberry_DD11.stl b/printer_mods/Tircown/Raspberry_plug_panel/plug_panel_with_raspberry_DD11.stl new file mode 100644 index 000000000..967cbd05e Binary files /dev/null and b/printer_mods/Tircown/Raspberry_plug_panel/plug_panel_with_raspberry_DD11.stl differ diff --git a/printer_mods/Tircown/Raspberry_plug_panel/plug_panel_with_raspberry_filtered_rocker.stl b/printer_mods/Tircown/Raspberry_plug_panel/plug_panel_with_raspberry_filtered_rocker.stl new file mode 100644 index 000000000..18fc79fae Binary files /dev/null and b/printer_mods/Tircown/Raspberry_plug_panel/plug_panel_with_raspberry_filtered_rocker.stl differ diff --git a/printer_mods/Tircown/Raspberry_plug_panel/plug_panel_with_raspberry_unfiltered.stl b/printer_mods/Tircown/Raspberry_plug_panel/plug_panel_with_raspberry_unfiltered.stl new file mode 100644 index 000000000..d1ab0b471 Binary files /dev/null and b/printer_mods/Tircown/Raspberry_plug_panel/plug_panel_with_raspberry_unfiltered.stl differ diff --git a/printer_mods/Tircown/Raspberry_plug_panel/readme.md b/printer_mods/Tircown/Raspberry_plug_panel/readme.md new file mode 100644 index 000000000..f62c1d80d --- /dev/null +++ b/printer_mods/Tircown/Raspberry_plug_panel/readme.md @@ -0,0 +1,16 @@ +# Voron 2.4 Raspberry vertically installed in plug panel + +For the DD11 version I used this reference: SCHURTER DD11.0113.1111 +Many other versions of SHURTER DDXX plugs are compatible. Check out sizes on datasheet. + +### Instructions +1. Put three M3 threaded inserts in the back of the panel. +2. Install the pi on the bracket with three M2x10 self tapping screws. +3. Pass the USB cable(s) for inner components such as SKR before attaching the bracket to the panel. + There is a notch on the side of the opening for the raspberry to that purpose. +4. Use three M3x8 to attach the bracket to the raspberry. +The rest of the installation is pretty similar to the original bracket: check the official manual. + +![photo1](Images/image0.jpg) +![photo2](Images/image1.jpg) +![photo3](Images/image2.jpg) \ No newline at end of file