diff --git a/printer_mods/README.md b/printer_mods/README.md index 1c8f3f194..09226635d 100644 --- a/printer_mods/README.md +++ b/printer_mods/README.md @@ -404,26 +404,26 @@ Printer mods for Voron 3D printers | wile-e1 | [Deck Panel Support Clips](wile-e1/Deck_Panel_Support_Clips) | Clips to help support lower deck panels to prevent (or fix) warping: | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | | | [Stealthburner + CW1 + PCB Cover](wile-e1/Stealthburner_CW1_PCB_Cover) | Low-poly for Stealthburner + CW1 + PCB installations: | V1.8, V2.4, VSW | 2024-01-08T16:38:25+00:00 | | wrez | [V0 Alternate IEC 320 C14 Power...](wrez/astrodyne-inlet) | Drop in replacement for alternate-source power inlet if spec inlet... | V0.2 | 2024-01-08T16:38:25+00:00 | -| xbst_ | [ADXL345 V0 Mount](xbst_/ADXL345_V0_Mount) | V0 Mount for a ADXL345 module | V0.2 | 2024-01-08T16:38:25+00:00 | -| | [Car Hood Style Bed Hinge](xbst_/Bed_Hinge) | A way of reaching electronics from the top by having a "car hood"... | V2.4 | 2024-01-08T16:38:25+00:00 | -| | [Duct Mount](xbst_/Duct_Mount) | 100mm/4" ducting mount for ventilation. Also supports umbilical... | V2.4 | 2024-01-08T16:38:25+00:00 | -| | [DuetZero](xbst_/DuetZero) | Pi Zero mount over a Duet2 for space saving | V0.2, V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | -| | [Easy Access Rear Panels](xbst_/Easy_Access_Rear_Panels_v0) | New rear panels designed to expose the extruder for easy filament... | V0.2 | 2024-01-08T16:38:25+00:00 | -| | [Flat V2.4 Skirts](xbst_/Flat_Skirts) | Flat V2.4 Skirts so a panel without cutouts can be used | V2.4 | 2024-01-08T16:38:25+00:00 | +| xbst_ | [ADXL345 V0 Mount](xbst_/ADXL345_V0_Mount) | V0 Mount for a ADXL345 module | V0.2 | 2024-03-14T14:43:28+00:00 | +| | [Car Hood Style Bed Hinge](xbst_/Bed_Hinge) | A way of reaching electronics from the top by having a "car hood"... | V2.4 | 2024-03-14T14:43:28+00:00 | +| | [Duct Mount](xbst_/Duct_Mount) | 100mm/4" ducting mount for ventilation. Also supports umbilical... | V2.4 | 2024-03-14T14:43:28+00:00 | +| | [DuetZero](xbst_/DuetZero) | Pi Zero mount over a Duet2 for space saving | V0.2, V1.8, V2.4 | 2024-03-14T14:43:28+00:00 | +| | [Easy Access Rear Panels](xbst_/Easy_Access_Rear_Panels_v0) | New rear panels designed to expose the extruder for easy filament... | V0.2 | 2024-03-14T14:43:28+00:00 | +| | [Flat V2.4 Skirts](xbst_/Flat_Skirts) | Flat V2.4 Skirts so a panel without cutouts can be used | V2.4 | 2024-03-14T14:43:28+00:00 | | | [Hat LED Mount](xbst_/Hat_LED_Mount) | Top Hat LED module mount | V0.2 | 2024-01-08T16:38:25+00:00 | -| | [HOYMK SSR Mount](xbst_/HOYMK_SSR_Mount) | Mount for Chinese HOYMK SSR | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [HOYMK SSR Mount](xbst_/HOYMK_SSR_Mount) | Mount for Chinese HOYMK SSR | V0.2 | 2024-03-14T14:43:28+00:00 | | | [PCB LED Holder](xbst_/LED_Holder) | Very simple mount for some (?) PCB LED Bars | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | -| | [DIN Mount Max31865](xbst_/Max31865_DIN_Mount) | A simple DIN rail mount for the Adafruit (or SAME SIZE clone)... | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | -| | [DIN Mount Omron Relay](xbst_/Omron_DIN_Mount) | A simple DIN rail mount for the BOM Relay | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | -| | [DIN Mount Pi 4x Relay Board](xbst_/Relay_DIN_Mount) | A simple DIN rail mount for the 4 channel relay board for Raspberry Pi | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | -| | [V0 Electronics Cover](xbst_/V0_Electronic_Panel) | A printed cover for v0 electronics. Requires larger printer to print. | V0.2 | 2024-01-08T16:38:25+00:00 | -| | [Mobius 4 (M4) V0 Mod](xbst_/V0_M4_Mod) | Mod to mount a M4 extruder to a Voron 0 where pocketwatch extruder... | V0.2 | 2024-01-08T16:38:25+00:00 | -| | [V0 PiCam Mount](xbst_/V0_Picam) | A Raspberry Pi Camera Mount For V0 | V0.2 | 2024-01-08T16:38:25+00:00 | -| | [Screwed Front Door Hinge](xbst_/V0_Screw_Front_Hinge_Mod) | Mod to screw the front door panel (instead of VHB) | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [DIN Mount Max31865](xbst_/Max31865_DIN_Mount) | A simple DIN rail mount for the Adafruit (or SAME SIZE clone)... | V1.8, V2.4 | 2024-03-14T14:43:28+00:00 | +| | [DIN Mount Omron Relay](xbst_/Omron_DIN_Mount) | A simple DIN rail mount for the BOM Relay | V1.8, V2.4 | 2024-03-14T14:43:28+00:00 | +| | [DIN Mount Pi 4x Relay Board](xbst_/Relay_DIN_Mount) | A simple DIN rail mount for the 4 channel relay board for Raspberry Pi | V1.8, V2.4 | 2024-03-14T14:43:28+00:00 | +| | [V0 Electronics Cover](xbst_/V0_Electronic_Panel) | A printed cover for v0 electronics. Requires larger printer to print. | V0.2 | 2024-03-14T14:43:28+00:00 | +| | [Mobius 4 (M4) V0 Mod](xbst_/V0_M4_Mod) | Mod to mount a M4 extruder to a Voron 0 where pocketwatch extruder... | V0.2 | 2024-03-14T14:43:28+00:00 | +| | [V0 PiCam Mount](xbst_/V0_Picam) | A Raspberry Pi Camera Mount For V0 | V0.2 | 2024-03-14T14:43:28+00:00 | +| | [Screwed Front Door Hinge](xbst_/V0_Screw_Front_Hinge_Mod) | Mod to screw the front door panel (instead of VHB) | V0.2 | 2024-03-14T14:43:28+00:00 | | | [V0 Buttons & OLED Mount](xbst_/V0_Skirt_Buttons) | Mod to mount custom Gcode macro buttons & Waveshare 1.3" OLED display | V0.2 | 2024-01-08T16:38:25+00:00 | -| | [V2.4 Fanless Middle Skirt](xbst_/V2.4_Fanless_Middle_Skirt) | A Fanless alternative middle side skirt | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [V2.4 Fanless Middle Skirt](xbst_/V2.4_Fanless_Middle_Skirt) | A Fanless alternative middle side skirt | V2.4 | 2024-03-14T14:43:28+00:00 | | | [V2.4 Skirt Buttons](xbst_/V2.4_Skirt_Buttons) | Skirt mod for custom Gcode macro buttons | V2.4 | 2024-01-08T16:38:25+00:00 | -| | [ZipClip V0](xbst_/ZipClip_v0) | Very simple ziptie mount for v0 1515 extrusions | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [ZipClip V0](xbst_/ZipClip_v0) | Very simple ziptie mount for v0 1515 extrusions | V0.2 | 2024-03-14T14:43:28+00:00 | | xceled | [Single Panel Magnet Mount](xceled/Single_Panel_Magnet_Mount) | Mount your front panel using only magnets | V2.4 | 2024-01-08T16:38:25+00:00 | | yenda | [SW More Robust XZ Belt Paths](yenda/vsw_more_robust_belt_paths) | Small mods to belt routing components to ensure a better/more... | VSW | 2024-01-08T16:38:25+00:00 | | yeri | [V0 Magnetic Panels](yeri/V0_Magnetic_Panels) | Mount V0 panels with magnets, removes need for hinges and lets you... | V0.2 | 2024-01-08T16:38:25+00:00 | diff --git a/printer_mods/mods.json b/printer_mods/mods.json index f44bf0596..6e3ea433f 100644 --- a/printer_mods/mods.json +++ b/printer_mods/mods.json @@ -4243,7 +4243,7 @@ "printer_compatibility": [ "V0.2" ], - "last_changed": "2024-01-08T16:38:25+00:00" + "last_changed": "2024-03-14T14:43:28+00:00" }, { "path": "xbst_/Bed_Hinge", @@ -4253,7 +4253,7 @@ "printer_compatibility": [ "V2.4" ], - "last_changed": "2024-01-08T16:38:25+00:00" + "last_changed": "2024-03-14T14:43:28+00:00" }, { "path": "xbst_/Duct_Mount", @@ -4263,7 +4263,7 @@ "printer_compatibility": [ "V2.4" ], - "last_changed": "2024-01-08T16:38:25+00:00" + "last_changed": "2024-03-14T14:43:28+00:00" }, { "path": "xbst_/DuetZero", @@ -4275,7 +4275,7 @@ "V1.8", "V2.4" ], - "last_changed": "2024-01-08T16:38:25+00:00" + "last_changed": "2024-03-14T14:43:28+00:00" }, { "path": "xbst_/Easy_Access_Rear_Panels_v0", @@ -4285,7 +4285,7 @@ "printer_compatibility": [ "V0.2" ], - "last_changed": "2024-01-08T16:38:25+00:00" + "last_changed": "2024-03-14T14:43:28+00:00" }, { "path": "xbst_/Flat_Skirts", @@ -4295,7 +4295,7 @@ "printer_compatibility": [ "V2.4" ], - "last_changed": "2024-01-08T16:38:25+00:00" + "last_changed": "2024-03-14T14:43:28+00:00" }, { "path": "xbst_/HOYMK_SSR_Mount", @@ -4305,7 +4305,7 @@ "printer_compatibility": [ "V0.2" ], - "last_changed": "2024-01-08T16:38:25+00:00" + "last_changed": "2024-03-14T14:43:28+00:00" }, { "path": "xbst_/Hat_LED_Mount", @@ -4337,7 +4337,7 @@ "V1.8", "V2.4" ], - "last_changed": "2024-01-08T16:38:25+00:00" + "last_changed": "2024-03-14T14:43:28+00:00" }, { "path": "xbst_/Omron_DIN_Mount", @@ -4348,7 +4348,7 @@ "V1.8", "V2.4" ], - "last_changed": "2024-01-08T16:38:25+00:00" + "last_changed": "2024-03-14T14:43:28+00:00" }, { "path": "xbst_/Relay_DIN_Mount", @@ -4359,7 +4359,7 @@ "V1.8", "V2.4" ], - "last_changed": "2024-01-08T16:38:25+00:00" + "last_changed": "2024-03-14T14:43:28+00:00" }, { "path": "xbst_/V0_Electronic_Panel", @@ -4369,7 +4369,7 @@ "printer_compatibility": [ "V0.2" ], - "last_changed": "2024-01-08T16:38:25+00:00" + "last_changed": "2024-03-14T14:43:28+00:00" }, { "path": "xbst_/V0_M4_Mod", @@ -4379,7 +4379,7 @@ "printer_compatibility": [ "V0.2" ], - "last_changed": "2024-01-08T16:38:25+00:00" + "last_changed": "2024-03-14T14:43:28+00:00" }, { "path": "xbst_/V0_Picam", @@ -4389,7 +4389,7 @@ "printer_compatibility": [ "V0.2" ], - "last_changed": "2024-01-08T16:38:25+00:00" + "last_changed": "2024-03-14T14:43:28+00:00" }, { "path": "xbst_/V0_Screw_Front_Hinge_Mod", @@ -4399,7 +4399,7 @@ "printer_compatibility": [ "V0.2" ], - "last_changed": "2024-01-08T16:38:25+00:00" + "last_changed": "2024-03-14T14:43:28+00:00" }, { "path": "xbst_/V0_Skirt_Buttons", @@ -4419,7 +4419,7 @@ "printer_compatibility": [ "V2.4" ], - "last_changed": "2024-01-08T16:38:25+00:00" + "last_changed": "2024-03-14T14:43:28+00:00" }, { "path": "xbst_/V2.4_Skirt_Buttons", @@ -4439,7 +4439,7 @@ "printer_compatibility": [ "V0.2" ], - "last_changed": "2024-01-08T16:38:25+00:00" + "last_changed": "2024-03-14T14:43:28+00:00" }, { "path": "xceled/Single_Panel_Magnet_Mount",