Voron Mods by PhilLeMint (#10)

* Added Corner clips 3/32 foam and c920 mount

* Added Dual LED Light Mount

* Create Velocity Stack.STL

* Indicator Mount

printer_mods/PhilLeMint/Dual_LED_Light_Mount/ReadMe

@@ -0,0 +1,4 @@
+This is for a dual LED light bar setup.  Step files are included for your own modification.
+The LED cutouts may need to be modified depending on the dimensions of your light bar.
+Designed to be mounted at the front of the Voron so the lights don't blind you when looking inside :)
+Could be mounted anywhere though.

printer_mods/PhilLeMint/Indicator_Mount/ReadMe

@@ -0,0 +1 @@
+This mount is for any standard indicator as the one pictured.  Dial or Digital.  Mounts to the hot end fan using the two exisiting top screws

printer_mods/PhilLeMint/Panel_Mounting/ReadMe

@@ -0,0 +1,3 @@
+These brackets are 4.4mm deep.  They are designed to give a light squish on the foam without too much distortion.
+The foam is 3/32" thick from McMaster Carr
+STEP files are included for your own custom modification.

printer_mods/PhilLeMint/Velocity_Stack/ReadMe

@@ -0,0 +1,3 @@
+This is a fun velocity stack that serves no purpose what so ever except to look cool.  Has voron logo in center.  
+Requires 10 or 15mm Hot end fan so it won't hit the front panel
+Enjoy!

printer_mods/PhilLeMint/c920_Mount/ReadMe

@@ -0,0 +1,3 @@
+c920 Mount.  Supports are needed at the boss.  If mounted at the front of a 350 voron the entire build surface is in view.
+Instructions for c920 dissasembly can be found here:  https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077
+Some massaging of the D shaped bushing hole may be needed.

printer_mods/README.md

@@ -80,6 +80,11 @@ If your mod is lacking a column in the compatibility matrix, feel free to submit
 |manfre |[Openbuild chain ends](./manfre/cable_chains) |Cable chain ends to use off the shelf chains with Voron parts |:x: |:heavy_check_mark: |:heavy_check_mark: |
 |nemgrea |[Magnetic Split Front Door](./nemgrea/magnetic_split_front_door) |Hinges, handles and magnet mounts for creating a split front door panel |:x: |:heavy_check_mark: |:grey_question: |
 |OrkusMG | [Waveshare 5 Inch LCD Cover](./OrkusMG/Waveshare5inchHDMILCDscreenCover)|Display Cover for the Waveshare 5 inch HDMI LCD screen |:heavy_check_mark: |:heavy_check_mark: | :heavy_check_mark:|
+|PhilLeMint | [c920 Mount](./PhilLeMint/c920_Mount/) | c920 Camera Mount | :grey_question: | :heavy_check_mark: | :heavy_check_mark: |
+| |[Panel Mounting](./PhilLeMint/Panel_Mounting/) | Panel Clips for 3/32" Foam Tape |:grey_question: | :heavy_check_mark: |:heavy_check_mark: |
+| |[Dual LED Light Mount](./PhilLeMint/Dual_LED_Light_Mount/) | Mounts for Dual LED Bar |:grey_question: | :heavy_check_mark: |:heavy_check_mark: |
+| |[Velocity Stack](./PhilLeMint/Velocity_Stack/) | Velocity Stack Fan Cover |:grey_question: | :heavy_check_mark: |:heavy_check_mark: |
+| |[Indicator Mount](./PhilLeMint/Indicator_Mount/) | Mount for Indicator |:grey_question: | :heavy_check_mark: |:heavy_check_mark: |
 |pnokel |[Cable Zipper](./pnokel) |Small mount to secure wires with zip ties |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: |
 | |[Coroplast holders](./pnokel) | Different coroplast holders for added support |:x:| :heavy_check_mark:|:grey_question: |
 | |[Toothed Idler](./pnokel) |14.5mm toothed idler | :x: | :x: |:x:|
@@ -108,6 +113,6 @@ If your mod is lacking a column in the compatibility matrix, feel free to submit
 | wile.e.coyote| [Coroplast Support](./wile.e.coyote)|Support for the coroplast to prevent sagging | :x: |:heavy_check_mark: |:grey_question: |
 | |[Dual Buck Bracket](./wile.e.coyote)   |Mounting bracket for 2 buck converters | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |
 | |[Nozzle Scrubber Mount](./wile.e.coyote) | Mount for brass brush. Used for cleaning nozzle before printing |:x: | :heavy_check_mark: |:heavy_check_mark: |
-| | [Wago Mounts](./wile.e.coyote)  | Different mounts for Wago connectors | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |
+| | [Wago Mounts](./wile.e.coyote)  | Different mounts for Wago connectors | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: | 
 
 ---