Add microfit 2x3 skirt connector (ADXL) (#605)

* Add microfit 2x3 skirt connector (ADXL)

* Add to Main README

printer_mods/README.md

@@ -281,6 +281,7 @@ like so:
 | rngSplat | [Printable Switchwire Deck Plate](./rngSplat/SW_Deck_Plate) | Print a deck plate for Switchwire with debossed Voron logo | :x: | :x: | :x: | :heavy_check_mark: |
 | rsheng118 | [BTT octopus DIN vertical mount](./rsheng118/BTT_octopus_DIN_vertical_mount) | DIN vertical mount for Big Tech Tree Octopus board | :x: | :x: | :heavy_check_mark: | :x: |
 | ryandam | [Cable Management Duct](./ryandam/Cable_management_duct) | Zip tie mount intergrated cable duct to hide your cable | :heavy_check_mark: | :grey_question: | :grey_question: | :grey_question: | :grey_question: |
+| samwiseg0 | [Microfit 2x3 Skirt Connector (ADXL)](./samwiseg0/microfit_2x3_skirt_connector_adxl) | Mod for a Microfit 2x3 connector to be mounted in a skirt | :x: | :x: | :heavy_check_mark: | :grey_question: | :grey_question: |
 | See1807 | [TopHat Exhaust and LED Light](./See1807/Voron_V0_Exhaust_and_LED_Mod) | A mount for 10mm LED strips and Exhaust for Voron V0 | :heavy_check_mark: | :x: | :x: | :x: |
 | sse018 | [Octopus DIN Rail bracket](./sse018/Octopus_DIN_Rail_bracket) | A Din rail mount for BTT Octopus board | :x: | :x: |:heavy_check_mark: | :x: |
 | Slidr | [PanzerBalls 2.4](./Slidr/PanzerBalls2.4) | Squash Ball Feet for V2.4 | :x: | :x: | :heavy_check_mark: |:x:| :x: |
@@ -345,4 +346,3 @@ like so:
 | | [V0 Skirt set](./Zen3D/V0_Skirt)| SSR, PowerSwitch, Adxl, Nameplate and color change printing  | :heavy_check_mark: |:x: |:x: |:x:|:x: |
 | | [V0 1515 T-nut](./Zen3D/V0_1515_T-nut)| M3 square and hex nuts for Voron0 1515 frame | :heavy_check_mark: |:x: |:x: |:x:|
 | zruncho | [V0 No-Drop Nuts](./zruncho/V0_No_Drop_Nuts) | Voron0 nut inserts which auto-align (LDO frames only) | :heavy_check_mark: | :x: | :x: | :x: |
-

printer_mods/samwiseg0/microfit_2x3_skirt_connector_adxl/README.md

@@ -0,0 +1,23 @@
+# Microfit 2x3 Skirt Connector (ADXL)
+Mod for a Microfit 2x3 connector to be mounted in the bestagons. Typically used for ADXL but can be used as a general connector for anything outside the printer.
+
+ **Pro tip: I found that adding some hot-glue while installing it into the skirt makes it a bit more robust for unplugging and plugging in.**
+
+This is originally based off of [this mod](https://github.com/Barcode-Labs/VORON_MODS/tree/main/INPUT_SHAPER_SKIRT_CONNECTOR). It was modified to not require supports and have a bit tighter fit onto the connector.
+
+### Printing
+  * Default voron settings
+  * No supports needed
+
+### BOM
+
+Size | Qty
+--- | ---
+[Microfit 0430200608](https://www.digikey.com/en/products/detail/molex/0430200608/4481507) | 1
+[Microfit 0430250600](https://www.digikey.com/en/products/detail/molex/0430250600/252498) | 1
+
+![Microfit 2x3 Skirt Connector (ADXL)](Images/[a]_microfit_2x3_skirt_connector_adxl_skirt.png)
+
+![Microfit 2x3 Skirt Connector (ADXL)](Images/[a]_microfit_2x3_skirt_connector_adxl_whole.png)
+
+![Microfit 2x3 Skirt Connector (ADXL)](Images/[a]_microfit_2x3_skirt_connector_adxl.png)