diff --git a/printer_mods/Ellis/15x15_Drag_Chain_End/CAD/15x15_Drag_Chain_End.f3d b/printer_mods/Ellis/15x15_Drag_Chain_End/CAD/15x15_Drag_Chain_End.f3d new file mode 100644 index 000000000..258a6d98f Binary files /dev/null and b/printer_mods/Ellis/15x15_Drag_Chain_End/CAD/15x15_Drag_Chain_End.f3d differ diff --git a/printer_mods/Ellis/15x15_Drag_Chain_End/Images/Image.png b/printer_mods/Ellis/15x15_Drag_Chain_End/Images/Image.png new file mode 100644 index 000000000..b6a47ffed Binary files /dev/null and b/printer_mods/Ellis/15x15_Drag_Chain_End/Images/Image.png differ diff --git a/printer_mods/Ellis/15x15_Drag_Chain_End/README.md b/printer_mods/Ellis/15x15_Drag_Chain_End/README.md new file mode 100644 index 000000000..4724aee6b --- /dev/null +++ b/printer_mods/Ellis/15x15_Drag_Chain_End/README.md @@ -0,0 +1,5 @@ +15x15 Drag Chain End + +End pieces for 15x15 drag chains. Designed around Cloudray China chains, but will likely work with other chain brands too. + +![Image](Images/Image.png) diff --git a/printer_mods/Ellis/15x15_Drag_Chain_End/STL/15x15_Drag_Chain_End.stl b/printer_mods/Ellis/15x15_Drag_Chain_End/STL/15x15_Drag_Chain_End.stl new file mode 100644 index 000000000..3bee350a1 Binary files /dev/null and b/printer_mods/Ellis/15x15_Drag_Chain_End/STL/15x15_Drag_Chain_End.stl differ diff --git a/printer_mods/Ellis/Badge_Retractor_Mount/CAD/Retractor Mount Slanted.f3d b/printer_mods/Ellis/Badge_Retractor_Mount/CAD/Retractor Mount Slanted.f3d new file mode 100644 index 000000000..6381decb1 Binary files /dev/null and b/printer_mods/Ellis/Badge_Retractor_Mount/CAD/Retractor Mount Slanted.f3d differ diff --git a/printer_mods/Ellis/Badge_Retractor_Mount/CAD/Retractor Mount Straight.f3d b/printer_mods/Ellis/Badge_Retractor_Mount/CAD/Retractor Mount Straight.f3d new file mode 100644 index 000000000..a1e192d22 Binary files /dev/null and b/printer_mods/Ellis/Badge_Retractor_Mount/CAD/Retractor Mount Straight.f3d differ diff --git a/printer_mods/Ellis/Badge_Retractor_Mount/Images/Example.jpg b/printer_mods/Ellis/Badge_Retractor_Mount/Images/Example.jpg new file mode 100644 index 000000000..fa0b9beb1 Binary files /dev/null and b/printer_mods/Ellis/Badge_Retractor_Mount/Images/Example.jpg differ diff --git a/printer_mods/Ellis/Badge_Retractor_Mount/Images/Image.jpg b/printer_mods/Ellis/Badge_Retractor_Mount/Images/Image.jpg new file mode 100644 index 000000000..958ee4cc0 Binary files /dev/null and b/printer_mods/Ellis/Badge_Retractor_Mount/Images/Image.jpg differ diff --git a/printer_mods/Ellis/Badge_Retractor_Mount/README.md b/printer_mods/Ellis/Badge_Retractor_Mount/README.md new file mode 100644 index 000000000..0fb331431 --- /dev/null +++ b/printer_mods/Ellis/Badge_Retractor_Mount/README.md @@ -0,0 +1,12 @@ +Badge Retractor Mount + +Just a simple little mod to keep the bowden tube out of the way using a badge retractor. Available in multiple angles. + +Designed for this style of badge retractor, but may work with others: + +![Example](Images/Example.jpg) + +(You probably have one in a drawer somewhere) + +25 Degree +![25 Degree](Images/Image.jpg) diff --git a/printer_mods/Ellis/Badge_Retractor_Mount/STL/RetractorMount.stl b/printer_mods/Ellis/Badge_Retractor_Mount/STL/RetractorMount.stl new file mode 100644 index 000000000..dd43f632d Binary files /dev/null and b/printer_mods/Ellis/Badge_Retractor_Mount/STL/RetractorMount.stl differ diff --git a/printer_mods/Ellis/Badge_Retractor_Mount/STL/RetractorMount15deg.stl b/printer_mods/Ellis/Badge_Retractor_Mount/STL/RetractorMount15deg.stl new file mode 100644 index 000000000..6adbc5a2c Binary files /dev/null and b/printer_mods/Ellis/Badge_Retractor_Mount/STL/RetractorMount15deg.stl differ diff --git a/printer_mods/Ellis/Badge_Retractor_Mount/STL/RetractorMount25deg.stl b/printer_mods/Ellis/Badge_Retractor_Mount/STL/RetractorMount25deg.stl new file mode 100644 index 000000000..995c46f5d Binary files /dev/null and b/printer_mods/Ellis/Badge_Retractor_Mount/STL/RetractorMount25deg.stl differ diff --git a/printer_mods/Ellis/Badge_Retractor_Mount/STL/RetractorMount35deg.stl b/printer_mods/Ellis/Badge_Retractor_Mount/STL/RetractorMount35deg.stl new file mode 100644 index 000000000..b66189051 Binary files /dev/null and b/printer_mods/Ellis/Badge_Retractor_Mount/STL/RetractorMount35deg.stl differ diff --git a/printer_mods/Ellis/Short_Z_Joints/CAD/Voron 2.4 - Shorter Z Mounts.f3d b/printer_mods/Ellis/Short_Z_Joints/CAD/Voron 2.4 - Shorter Z Mounts.f3d new file mode 100644 index 000000000..c53fde1da Binary files /dev/null and b/printer_mods/Ellis/Short_Z_Joints/CAD/Voron 2.4 - Shorter Z Mounts.f3d differ diff --git a/printer_mods/Ellis/Short_Z_Joints/Images/Side-By-Side-Cross-Section.png b/printer_mods/Ellis/Short_Z_Joints/Images/Side-By-Side-Cross-Section.png new file mode 100644 index 000000000..0381021f1 Binary files /dev/null and b/printer_mods/Ellis/Short_Z_Joints/Images/Side-By-Side-Cross-Section.png differ diff --git a/printer_mods/Ellis/Short_Z_Joints/Images/Side-By-Side.png b/printer_mods/Ellis/Short_Z_Joints/Images/Side-By-Side.png new file mode 100644 index 000000000..a75c42867 Binary files /dev/null and b/printer_mods/Ellis/Short_Z_Joints/Images/Side-By-Side.png differ diff --git a/printer_mods/Ellis/Short_Z_Joints/README.md b/printer_mods/Ellis/Short_Z_Joints/README.md new file mode 100644 index 000000000..e77279395 --- /dev/null +++ b/printer_mods/Ellis/Short_Z_Joints/README.md @@ -0,0 +1,21 @@ +Shorter Z joints for Voron 2.4 + +This mod reduces the size of the Z joint stack by 12.5mm. + +The intent is to increase gantry stability by reducing the leverage on the Z ball joints while throwing the toolhead around. + +This is only tested with microswitch XY endstops. There is no hall effect magnet slot, though you may be able to affix one to the upper right screw head. + +To use this mod, you will need: +- 4x M5x30 SHCS/BHCS +- 4x M5x20 BHCS +- 4x M3x20 SHCS +- 4x M5 nylon lock nuts (optional*) + +* You can use standard M5 nuts as per the original config, however I prefer nylock nuts here. + +Side by Side +![Side by Side](Images/Side-By-Side.png) + +Cross Section +![Cross Section](Images/Side-By-Side-Cross-Section.png) diff --git a/printer_mods/Ellis/Short_Z_Joints/STL/Z Bearing Block Bottom.stl b/printer_mods/Ellis/Short_Z_Joints/STL/Z Bearing Block Bottom.stl new file mode 100644 index 000000000..2f2ee87dd Binary files /dev/null and b/printer_mods/Ellis/Short_Z_Joints/STL/Z Bearing Block Bottom.stl differ diff --git a/printer_mods/Ellis/Short_Z_Joints/STL/Z Bearing Block Top.stl b/printer_mods/Ellis/Short_Z_Joints/STL/Z Bearing Block Top.stl new file mode 100644 index 000000000..61c9a0f32 Binary files /dev/null and b/printer_mods/Ellis/Short_Z_Joints/STL/Z Bearing Block Top.stl differ diff --git a/printer_mods/Ellis/Short_Z_Joints/STL/Z Belt Clamp Lower.stl b/printer_mods/Ellis/Short_Z_Joints/STL/Z Belt Clamp Lower.stl new file mode 100644 index 000000000..6a10fc8d4 Binary files /dev/null and b/printer_mods/Ellis/Short_Z_Joints/STL/Z Belt Clamp Lower.stl differ diff --git a/printer_mods/README.md b/printer_mods/README.md index 493f0301e..8dec5922e 100644 --- a/printer_mods/README.md +++ b/printer_mods/README.md @@ -29,6 +29,9 @@ like so: |Badnoob |[Precision AB Drive](./Badnoob/Precision_AB_Drive)|Changes the gearing for the AB drives to improve both resolution and torque, with a strenthened frame. |:grey_question:|:grey_question:|:heavy_check_mark:| | |[Rail Alignment](./Badnoob/Rail_Alignment)|Tools and procedure to properly align the rails in 2.4 and Afterburner|:x:|:x:|:heavy_check_mark:| |Dan88 |[V0 one-part Skirts](./Dan88/V0skirt) |One part Skirts for the V0 |:heavy_check_mark: |:x: |:x: | +| Ellis |[15x15 Drag Chain Ends](./Ellis/15x15_Drag_Chain_End) | 15x15 drag chain end pieces | :grey_question: | :grey_question: |:heavy_check_mark: | +| |[Badge Retractor Mount](./Ellis/Badge_Retractor_Mount) | Extrusion mount for badge retractor to keep bowden tube out of the way. | :grey_question: | :grey_question: |:heavy_check_mark: | +| |[Short Z Joints](./Ellis/Short_Z_Joints) | Shorter Z joints for the v2.4 |:x: |:x: |:heavy_check_mark: | | FreeformFez | [V1.8 Filtered Power Inlet](./FreeformFez/FilteredPower) | V1.6 Filtered Inlet and Rocker Switch for V1.8 | :x: | :heavy_check_mark: | :x: | | GSL12 | [Pocketwatch Nema 17](./GSL12/pocketwatch_nema17)| Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe for V0 fork with 2020 extrusions, Nema17 and MGN9 or other printers. | :grey_question: | :grey_question: | :grey_question: | |hijax_pl_ |[Corner panel clip](./hijax_pl/corner_panel_clip) |V2 panel corner frames using 3-way L brackets in the corners |:x: |:x: |:heavy_check_mark: |