V0 Mods by Maverick_ (#188)

printer_mods/Maverick_/ReadMe.md

@@ -0,0 +1,3 @@
+# Maverick Mods
+
+A running repository of the modifications designed for my Voron builds. Reach out to me on Discord at Maverick_#7924 if you have any questions. 

printer_mods/Maverick_/V0_C14_Inlet_Foot/ReadMe.md

@@ -0,0 +1,7 @@
+# V0 C14 Inlet
+
+A simple modification to the rear foot of the V0 to allow for the addition of a C14 Inlet.
+
+*Note - this is not compatible with the rear, lower deck panel that sits below the Z Mount.*
+
+![C14 Inlet](Images/C14_Inlet.PNG)

printer_mods/Maverick_/V0_Deck_Logo_LED/ReadMe.md

@@ -0,0 +1,32 @@
+# V0 Illuminated Deck Logo
+
+
+A lower deck panel addition to the V0, designed to accomodate a Neopixel Ring.
+
+
+## Print
+* Deck_Logo_Insert_Transparent 
+   * Printed with a clear filament to allow for the glow that is represented in the pictures.
+   * Recommend >40% infill to hide the individual LEDs.
+
+* Deck_Logo 
+  * This is meant to be printed with no top or bottom layers, leaving the infill pattern exposed for light to shine through.  
+  * Perimeters (vertical): 2 or 3 
+  * Solid Layers (horizontal): 0 Top and 0 Bottom
+  * Infill Pattern: I recommend a pattern like "Honeycomb", "Stars" or similar. The main goal is to be able to see through the print.
+  * Infill Density: This will vary depending on your infill pattern and personal preference. Play around with it to get the look that you want. 
+
+
+## Assemble and Install
+The parts are pressed and snapped together then attached to the lower deck panel via VHB tape.
+
+
+## LEDs
+I used two Neopixel Rings (a 24 and a 12) in my build, but only one is required. VHB tape was also used to secure these to the deck panel. I then drilled a hole through the deck to accomodate the wires necessary to run to an Arduino Nano as a controller. 
+
+
+## Controller
+The lights can be controlled with an Arduino Nano, Klipper, or an Octoprint Plugin. 
+
+
+![Deck Logo](Images/Deck_Logo.jpg)

printer_mods/Maverick_/V0_LED_Front_Bed_Mount/ReadMe.md

@@ -0,0 +1,10 @@
+# V0 LED Front Bed Mount
+
+This modification was designed to accomodate a Neopixel Jewel (7) in the face of the mount. Wiring is ran to the cable chain and ultimately to an Arduino Nano as a controller.
+
+The file "LED Front Bed Logo" was printed in a different color and added to the mount using an adhesive. 
+
+The lights can be controlled with an Arduino Nano, Klipper, or an Octoprint Plugin. 
+
+
+![LED Front Bed Mount 2](Images/LED_Front_Bed_Mount_2.PNG)

printer_mods/Maverick_/V0_LED_Front_Bed_Mount/STEP/LED_Front_Bed_Logo.step

@@ -0,0 +1,681 @@
+ISO-10303-21;
+HEADER;
+
+/* File generated by Shapr3D Version 3.0 */
+
+FILE_DESCRIPTION(('HOOPS Exchange Step'),'2;1');
+
+FILE_NAME('/private/var/mobile/Containers/Data/Application/E6228EE0-A747-4AD1-AFDC-49367F8A5A39/tmp/export/temp_export',
+'2020-11-04T15:26:43-06:00',
+('mobile'),
+('Shapr3D Limited'),
+'HOOPS Exchange 2020.2',
+'Shapr3D',
+'Authorized');
+
+FILE_SCHEMA( ('AP203_CONFIGURATION_CONTROLLED_3D_DESIGN_OF_MECHANICAL_PARTS_AND_ASSEMBLIES_MIM_LF') );
+
+ENDSEC;
+
+DATA;
+#3=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#4=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#3);
+#5=(CONVERSION_BASED_UNIT('DEGREE',#4)NAMED_UNIT(#6)PLANE_ANGLE_UNIT());
+#6=DIMENSIONAL_EXPONENTS(0.,0.,0.,0.,0.,0.,0.);
+#7=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#8=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#9=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.000000E-05),#8,'DISTANCE_ACCURACY_VALUE','Maximum Tolerance applied to model');
+#10=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#9))GLOBAL_UNIT_ASSIGNED_CONTEXT((#8,#5,#7))REPRESENTATION_CONTEXT('','LED Front Bed Logo'));
+#12=CARTESIAN_POINT('',(0.,0.,0.));
+#13=DIRECTION('',(0.,0.,1.));
+#14=DIRECTION('',(1.,0.,0.));
+#15=AXIS2_PLACEMENT_3D('',#12,#13,#14);
+#27=CARTESIAN_POINT('',(170.49013022,-160.555921375,-186.796094122));
+#28=DIRECTION('',(0.835624852,-0.549300562,-0.));
+#29=DIRECTION('',(-0.549300562,-0.835624852,0.));
+#30=AXIS2_PLACEMENT_3D('',#27,#28,#29);
+#31=PLANE('',#30);
+#32=CARTESIAN_POINT('',(172.740674861,-157.132274717,-188.145080057));
+#33=VERTEX_POINT('',#32);
+#34=CARTESIAN_POINT('',(168.239585578,-163.979568034,-188.145080057));
+#35=VERTEX_POINT('',#34);
+#36=CARTESIAN_POINT('',(172.740674861,-157.132274717,-188.145080057));
+#37=DIRECTION('',(-0.549300562,-0.835624852,-0.));
+#38=VECTOR('',#37,8.194219335);
+#39=LINE('',#36,#38);
+#40=EDGE_CURVE('',#33,#35,#39,.T.);
+#41=ORIENTED_EDGE('',*,*,#40,.T.);
+#42=CARTESIAN_POINT('',(168.239585578,-163.979568034,-186.871080057));
+#43=VERTEX_POINT('',#42);
+#44=CARTESIAN_POINT('',(168.239585578,-163.979568034,-186.871080057));
+#45=DIRECTION('',(-0.,0.,-1.));
+#46=VECTOR('',#45,1.274);
+#47=LINE('',#44,#46);
+#48=EDGE_CURVE('',#43,#35,#47,.T.);
+#49=ORIENTED_EDGE('',*,*,#48,.F.);
+#50=CARTESIAN_POINT('',(172.740674861,-157.132274717,-186.871080057));
+#51=VERTEX_POINT('',#50);
+#52=CARTESIAN_POINT('',(172.740674861,-157.132274717,-186.871080057));
+#53=DIRECTION('',(-0.549300562,-0.835624852,-0.));
+#54=VECTOR('',#53,8.194219335);
+#55=LINE('',#52,#54);
+#56=EDGE_CURVE('',#51,#43,#55,.T.);
+#57=ORIENTED_EDGE('',*,*,#56,.F.);
+#58=CARTESIAN_POINT('',(172.740674861,-157.132274717,-186.871080057));
+#59=DIRECTION('',(-0.,0.,-1.));
+#60=VECTOR('',#59,1.274);
+#61=LINE('',#58,#60);
+#62=EDGE_CURVE('',#51,#33,#61,.T.);
+#63=ORIENTED_EDGE('',*,*,#62,.T.);
+#64=EDGE_LOOP('',(#41,#49,#57,#63));
+#65=FACE_BOUND('',#64,.T.);
+#66=ADVANCED_FACE('',(#65),#31,.F.);
+#67=CARTESIAN_POINT('',(166.886075681,-163.979568034,-186.796094122));
+#68=DIRECTION('',(0.,-1.,-0.));
+#69=DIRECTION('',(0.,0.,-1.));
+#70=AXIS2_PLACEMENT_3D('',#67,#68,#69);
+#71=PLANE('',#70);
+#72=CARTESIAN_POINT('',(165.532565784,-163.979568034,-188.145080057));
+#73=VERTEX_POINT('',#72);
+#74=CARTESIAN_POINT('',(168.239585578,-163.979568034,-188.145080057));
+#75=DIRECTION('',(-1.,-0.,0.));
+#76=VECTOR('',#75,2.707019794);
+#77=LINE('',#74,#76);
+#78=EDGE_CURVE('',#35,#73,#77,.T.);
+#79=ORIENTED_EDGE('',*,*,#78,.T.);
+#80=CARTESIAN_POINT('',(165.532565784,-163.979568034,-186.871080057));
+#81=VERTEX_POINT('',#80);
+#82=CARTESIAN_POINT('',(165.532565784,-163.979568034,-186.871080057));
+#83=DIRECTION('',(-0.,0.,-1.));
+#84=VECTOR('',#83,1.274);
+#85=LINE('',#82,#84);
+#86=EDGE_CURVE('',#81,#73,#85,.T.);
+#87=ORIENTED_EDGE('',*,*,#86,.F.);
+#88=CARTESIAN_POINT('',(168.239585578,-163.979568034,-186.871080057));
+#89=DIRECTION('',(-1.,-0.,0.));
+#90=VECTOR('',#89,2.707019794);
+#91=LINE('',#88,#90);
+#92=EDGE_CURVE('',#43,#81,#91,.T.);
+#93=ORIENTED_EDGE('',*,*,#92,.F.);
+#94=ORIENTED_EDGE('',*,*,#48,.T.);
+#95=EDGE_LOOP('',(#79,#87,#93,#94));
+#96=FACE_BOUND('',#95,.T.);
+#97=ADVANCED_FACE('',(#96),#71,.F.);
+#98=CARTESIAN_POINT('',(167.782810553,-160.555921375,-186.796094122));
+#99=DIRECTION('',(-0.835658447,0.549249451,0.));
+#100=DIRECTION('',(0.549249451,0.835658447,-0.));
+#101=AXIS2_PLACEMENT_3D('',#98,#99,#100);
+#102=PLANE('',#101);
+#103=CARTESIAN_POINT('',(170.033055322,-157.132274717,-188.145080057));
+#104=VERTEX_POINT('',#103);
+#105=CARTESIAN_POINT('',(165.532565784,-163.979568034,-188.145080057));
+#106=DIRECTION('',(0.549249451,0.835658447,0.));
+#107=VECTOR('',#106,8.19388991);
+#108=LINE('',#105,#107);
+#109=EDGE_CURVE('',#73,#104,#108,.T.);
+#110=ORIENTED_EDGE('',*,*,#109,.T.);
+#111=CARTESIAN_POINT('',(170.033055322,-157.132274717,-186.871080057));
+#112=VERTEX_POINT('',#111);
+#113=CARTESIAN_POINT('',(170.033055322,-157.132274717,-186.871080057));
+#114=DIRECTION('',(-0.,0.,-1.));
+#115=VECTOR('',#114,1.274);
+#116=LINE('',#113,#115);
+#117=EDGE_CURVE('',#112,#104,#116,.T.);
+#118=ORIENTED_EDGE('',*,*,#117,.F.);
+#119=CARTESIAN_POINT('',(165.532565784,-163.979568034,-186.871080057));
+#120=DIRECTION('',(0.549249451,0.835658447,0.));
+#121=VECTOR('',#120,8.19388991);
+#122=LINE('',#119,#121);
+#123=EDGE_CURVE('',#81,#112,#122,.T.);
+#124=ORIENTED_EDGE('',*,*,#123,.F.);
+#125=ORIENTED_EDGE('',*,*,#86,.T.);
+#126=EDGE_LOOP('',(#110,#118,#124,#125));
+#127=FACE_BOUND('',#126,.T.);
+#128=ADVANCED_FACE('',(#127),#102,.F.);
+#129=CARTESIAN_POINT('',(170.102080207,-151.498822038,-186.796094122));
+#130=DIRECTION('',(0.,1.,0.));
+#131=DIRECTION('',(-0.,-0.,1.));
+#132=AXIS2_PLACEMENT_3D('',#129,#130,#131);
+#133=PLANE('',#132);
+#134=CARTESIAN_POINT('',(168.748539294,-151.498822038,-188.145080057));
+#135=VERTEX_POINT('',#134);
+#136=CARTESIAN_POINT('',(171.45562112,-151.498822038,-188.145080057));
+#137=VERTEX_POINT('',#136);
+#138=CARTESIAN_POINT('',(168.748539294,-151.498822038,-188.145080057));
+#139=DIRECTION('',(1.,-0.,-0.));
+#140=VECTOR('',#139,2.707081826);
+#141=LINE('',#138,#140);
+#142=EDGE_CURVE('',#135,#137,#141,.T.);
+#143=ORIENTED_EDGE('',*,*,#142,.T.);
+#144=CARTESIAN_POINT('',(171.45562112,-151.498822038,-186.871080057));
+#145=VERTEX_POINT('',#144);
+#146=CARTESIAN_POINT('',(171.45562112,-151.498822038,-186.871080057));
+#147=DIRECTION('',(-0.,0.,-1.));
+#148=VECTOR('',#147,1.274);
+#149=LINE('',#146,#148);
+#150=EDGE_CURVE('',#145,#137,#149,.T.);
+#151=ORIENTED_EDGE('',*,*,#150,.F.);
+#152=CARTESIAN_POINT('',(168.748539294,-151.498822038,-186.871080057));
+#153=VERTEX_POINT('',#152);
+#154=CARTESIAN_POINT('',(168.748539294,-151.498822038,-186.871080057));
+#155=DIRECTION('',(1.,-0.,-0.));
+#156=VECTOR('',#155,2.707081826);
+#157=LINE('',#154,#156);
+#158=EDGE_CURVE('',#153,#145,#157,.T.);
+#159=ORIENTED_EDGE('',*,*,#158,.F.);
+#160=CARTESIAN_POINT('',(168.748539294,-151.498822038,-186.871080057));
+#161=DIRECTION('',(-0.,0.,-1.));
+#162=VECTOR('',#161,1.274);
+#163=LINE('',#160,#162);
+#164=EDGE_CURVE('',#153,#135,#163,.T.);
+#165=ORIENTED_EDGE('',*,*,#164,.T.);
+#166=EDGE_LOOP('',(#143,#151,#159,#165));
+#167=FACE_BOUND('',#166,.T.);
+#168=ADVANCED_FACE('',(#167),#133,.F.);
+#169=CARTESIAN_POINT('',(167.353309308,-157.739195036,-186.796094122));
+#170=DIRECTION('',(0.835613575,-0.549317716,-0.));
+#171=DIRECTION('',(-0.549317716,-0.835613575,0.));
+#172=AXIS2_PLACEMENT_3D('',#169,#170,#171);
+#173=PLANE('',#172);
+#174=CARTESIAN_POINT('',(163.250997496,-163.979568034,-188.145080057));
+#175=VERTEX_POINT('',#174);
+#176=CARTESIAN_POINT('',(171.45562112,-151.498822038,-188.145080057));
+#177=DIRECTION('',(-0.549317716,-0.835613575,-0.));
+#178=VECTOR('',#177,14.936025892);
+#179=LINE('',#176,#178);
+#180=EDGE_CURVE('',#137,#175,#179,.T.);
+#181=ORIENTED_EDGE('',*,*,#180,.T.);
+#182=CARTESIAN_POINT('',(163.250997496,-163.979568034,-186.871080057));
+#183=VERTEX_POINT('',#182);
+#184=CARTESIAN_POINT('',(163.250997496,-163.979568034,-186.871080057));
+#185=DIRECTION('',(-0.,0.,-1.));
+#186=VECTOR('',#185,1.274);
+#187=LINE('',#184,#186);
+#188=EDGE_CURVE('',#183,#175,#187,.T.);
+#189=ORIENTED_EDGE('',*,*,#188,.F.);
+#190=CARTESIAN_POINT('',(171.45562112,-151.498822038,-186.871080057));
+#191=DIRECTION('',(-0.549317716,-0.835613575,-0.));
+#192=VECTOR('',#191,14.936025892);
+#193=LINE('',#190,#192);
+#194=EDGE_CURVE('',#145,#183,#193,.T.);
+#195=ORIENTED_EDGE('',*,*,#194,.F.);
+#196=ORIENTED_EDGE('',*,*,#150,.T.);
+#197=EDGE_LOOP('',(#181,#189,#195,#196));
+#198=FACE_BOUND('',#197,.T.);
+#199=ADVANCED_FACE('',(#198),#173,.F.);
+#200=CARTESIAN_POINT('',(161.897593226,-163.979568034,-186.796094122));
+#201=DIRECTION('',(0.,-1.,-0.));
+#202=DIRECTION('',(0.,0.,-1.));
+#203=AXIS2_PLACEMENT_3D('',#200,#201,#202);
+#204=PLANE('',#203);
+#205=CARTESIAN_POINT('',(160.544188957,-163.979568034,-188.145080057));
+#206=VERTEX_POINT('',#205);
+#207=CARTESIAN_POINT('',(163.250997496,-163.979568034,-188.145080057));
+#208=DIRECTION('',(-1.,-0.,0.));
+#209=VECTOR('',#208,2.706808539);
+#210=LINE('',#207,#209);
+#211=EDGE_CURVE('',#175,#206,#210,.T.);
+#212=ORIENTED_EDGE('',*,*,#211,.T.);
+#213=CARTESIAN_POINT('',(160.544188957,-163.979568034,-186.871080057));
+#214=VERTEX_POINT('',#213);
+#215=CARTESIAN_POINT('',(160.544188957,-163.979568034,-186.871080057));
+#216=DIRECTION('',(-0.,0.,-1.));
+#217=VECTOR('',#216,1.274);
+#218=LINE('',#215,#217);
+#219=EDGE_CURVE('',#214,#206,#218,.T.);
+#220=ORIENTED_EDGE('',*,*,#219,.F.);
+#221=CARTESIAN_POINT('',(163.250997496,-163.979568034,-186.871080057));
+#222=DIRECTION('',(-1.,-0.,0.));
+#223=VECTOR('',#222,2.706808539);
+#224=LINE('',#221,#223);
+#225=EDGE_CURVE('',#183,#214,#224,.T.);
+#226=ORIENTED_EDGE('',*,*,#225,.F.);
+#227=ORIENTED_EDGE('',*,*,#188,.T.);
+#228=EDGE_LOOP('',(#212,#220,#226,#227));
+#229=FACE_BOUND('',#228,.T.);
+#230=ADVANCED_FACE('',(#229),#204,.F.);
+#231=CARTESIAN_POINT('',(165.113490895,-151.498822038,-186.796094122));
+#232=DIRECTION('',(-0.,1.,0.));
+#233=DIRECTION('',(-0.,-0.,1.));
+#234=AXIS2_PLACEMENT_3D('',#231,#232,#233);
+#235=PLANE('',#234);
+#236=CARTESIAN_POINT('',(163.759695895,-151.498822038,-188.145080057));
+#237=VERTEX_POINT('',#236);
+#238=CARTESIAN_POINT('',(166.467285895,-151.498822038,-188.145080057));
+#239=VERTEX_POINT('',#238);
+#240=CARTESIAN_POINT('',(163.759695895,-151.498822038,-188.145080057));
+#241=DIRECTION('',(1.,0.,-0.));
+#242=VECTOR('',#241,2.70759);
+#243=LINE('',#240,#242);
+#244=EDGE_CURVE('',#237,#239,#243,.T.);
+#245=ORIENTED_EDGE('',*,*,#244,.T.);
+#246=CARTESIAN_POINT('',(166.467285895,-151.498822038,-186.871080057));
+#247=VERTEX_POINT('',#246);
+#248=CARTESIAN_POINT('',(166.467285895,-151.498822038,-186.871080057));
+#249=DIRECTION('',(-0.,0.,-1.));
+#250=VECTOR('',#249,1.274);
+#251=LINE('',#248,#250);
+#252=EDGE_CURVE('',#247,#239,#251,.T.);
+#253=ORIENTED_EDGE('',*,*,#252,.F.);
+#254=CARTESIAN_POINT('',(163.759695895,-151.498822038,-186.871080057));
+#255=VERTEX_POINT('',#254);
+#256=CARTESIAN_POINT('',(163.759695895,-151.498822038,-186.871080057));
+#257=DIRECTION('',(1.,0.,-0.));
+#258=VECTOR('',#257,2.70759);
+#259=LINE('',#256,#258);
+#260=EDGE_CURVE('',#255,#247,#259,.T.);
+#261=ORIENTED_EDGE('',*,*,#260,.F.);
+#262=CARTESIAN_POINT('',(163.759695895,-151.498822038,-186.871080057));
+#263=DIRECTION('',(-0.,0.,-1.));
+#264=VECTOR('',#263,1.274);
+#265=LINE('',#262,#264);
+#266=EDGE_CURVE('',#255,#237,#265,.T.);
+#267=ORIENTED_EDGE('',*,*,#266,.T.);
+#268=EDGE_LOOP('',(#245,#253,#261,#267));
+#269=FACE_BOUND('',#268,.T.);
+#270=ADVANCED_FACE('',(#269),#235,.F.);
+#271=CARTESIAN_POINT('',(164.216608793,-154.922592048,-186.796094122));
+#272=DIRECTION('',(0.835619096,-0.549309317,-0.));
+#273=DIRECTION('',(-0.549309317,-0.835619096,0.));
+#274=AXIS2_PLACEMENT_3D('',#271,#272,#273);
+#275=PLANE('',#274);
+#276=CARTESIAN_POINT('',(161.965931691,-158.346362058,-188.145080057));
+#277=VERTEX_POINT('',#276);
+#278=CARTESIAN_POINT('',(166.467285895,-151.498822038,-188.145080057));
+#279=DIRECTION('',(-0.549309317,-0.835619096,-0.));
+#280=VECTOR('',#279,8.194571007);
+#281=LINE('',#278,#280);
+#282=EDGE_CURVE('',#239,#277,#281,.T.);
+#283=ORIENTED_EDGE('',*,*,#282,.T.);
+#284=CARTESIAN_POINT('',(161.965931691,-158.346362058,-186.871080057));
+#285=VERTEX_POINT('',#284);
+#286=CARTESIAN_POINT('',(161.965931691,-158.346362058,-186.871080057));
+#287=DIRECTION('',(-0.,0.,-1.));
+#288=VECTOR('',#287,1.274);
+#289=LINE('',#286,#288);
+#290=EDGE_CURVE('',#285,#277,#289,.T.);
+#291=ORIENTED_EDGE('',*,*,#290,.F.);
+#292=CARTESIAN_POINT('',(166.467285895,-151.498822038,-186.871080057));
+#293=DIRECTION('',(-0.549309317,-0.835619096,-0.));
+#294=VECTOR('',#293,8.194571007);
+#295=LINE('',#292,#294);
+#296=EDGE_CURVE('',#247,#285,#295,.T.);
+#297=ORIENTED_EDGE('',*,*,#296,.F.);
+#298=ORIENTED_EDGE('',*,*,#252,.T.);
+#299=EDGE_LOOP('',(#283,#291,#297,#298));
+#300=FACE_BOUND('',#299,.T.);
+#301=ADVANCED_FACE('',(#300),#275,.F.);
+#302=CARTESIAN_POINT('',(160.612286627,-158.346362058,-186.796094122));
+#303=DIRECTION('',(0.,-1.,-0.));
+#304=DIRECTION('',(0.,0.,-1.));
+#305=AXIS2_PLACEMENT_3D('',#302,#303,#304);
+#306=PLANE('',#305);
+#307=CARTESIAN_POINT('',(159.258641562,-158.346362058,-188.145080057));
+#308=VERTEX_POINT('',#307);
+#309=CARTESIAN_POINT('',(161.965931691,-158.346362058,-188.145080057));
+#310=DIRECTION('',(-1.,-0.,0.));
+#311=VECTOR('',#310,2.707290129);
+#312=LINE('',#309,#311);
+#313=EDGE_CURVE('',#277,#308,#312,.T.);
+#314=ORIENTED_EDGE('',*,*,#313,.T.);
+#315=CARTESIAN_POINT('',(159.258641562,-158.346362058,-186.871080057));
+#316=VERTEX_POINT('',#315);
+#317=CARTESIAN_POINT('',(159.258641562,-158.346362058,-186.871080057));
+#318=DIRECTION('',(-0.,0.,-1.));
+#319=VECTOR('',#318,1.274);
+#320=LINE('',#317,#319);
+#321=EDGE_CURVE('',#316,#308,#320,.T.);
+#322=ORIENTED_EDGE('',*,*,#321,.F.);
+#323=CARTESIAN_POINT('',(161.965931691,-158.346362058,-186.871080057));
+#324=DIRECTION('',(-1.,-0.,0.));
+#325=VECTOR('',#324,2.707290129);
+#326=LINE('',#323,#325);
+#327=EDGE_CURVE('',#285,#316,#326,.T.);
+#328=ORIENTED_EDGE('',*,*,#327,.F.);
+#329=ORIENTED_EDGE('',*,*,#290,.T.);
+#330=EDGE_LOOP('',(#314,#322,#328,#329));
+#331=FACE_BOUND('',#330,.T.);
+#332=ADVANCED_FACE('',(#331),#306,.F.);
+#333=CARTESIAN_POINT('',(170.447131889,-150.026471449,-186.796094122));
+#334=DIRECTION('',(0.50002333,0.866011934,0.));
+#335=DIRECTION('',(0.866011934,-0.50002333,0.));
+#336=AXIS2_PLACEMENT_3D('',#333,#334,#335);
+#337=PLANE('',#336);
+#338=CARTESIAN_POINT('',(165.955312509,-147.432956977,-188.145080057));
+#339=VERTEX_POINT('',#338);
+#340=CARTESIAN_POINT('',(174.938951269,-152.619985921,-188.145080057));
+#341=VERTEX_POINT('',#340);
+#342=CARTESIAN_POINT('',(165.955312509,-147.432956977,-188.145080057));
+#343=DIRECTION('',(0.866011934,-0.50002333,-0.));
+#344=VECTOR('',#343,10.373573861);
+#345=LINE('',#342,#344);
+#346=EDGE_CURVE('',#339,#341,#345,.T.);
+#347=ORIENTED_EDGE('',*,*,#346,.F.);
+#348=CARTESIAN_POINT('',(165.955312509,-147.432956977,-186.871080057));
+#349=VERTEX_POINT('',#348);
+#350=CARTESIAN_POINT('',(165.955312509,-147.432956977,-186.871080057));
+#351=DIRECTION('',(-0.,0.,-1.));
+#352=VECTOR('',#351,1.274);
+#353=LINE('',#350,#352);
+#354=EDGE_CURVE('',#349,#339,#353,.T.);
+#355=ORIENTED_EDGE('',*,*,#354,.F.);
+#356=CARTESIAN_POINT('',(174.938951269,-152.619985921,-186.871080057));
+#357=VERTEX_POINT('',#356);
+#358=CARTESIAN_POINT('',(165.955312509,-147.432956977,-186.871080057));
+#359=DIRECTION('',(0.866011934,-0.50002333,-0.));
+#360=VECTOR('',#359,10.373573861);
+#361=LINE('',#358,#360);
+#362=EDGE_CURVE('',#349,#357,#361,.T.);
+#363=ORIENTED_EDGE('',*,*,#362,.T.);
+#364=CARTESIAN_POINT('',(174.938951269,-152.619985921,-186.871080057));
+#365=DIRECTION('',(-0.,0.,-1.));
+#366=VECTOR('',#365,1.274);
+#367=LINE('',#364,#366);
+#368=EDGE_CURVE('',#357,#341,#367,.T.);
+#369=ORIENTED_EDGE('',*,*,#368,.T.);
+#370=EDGE_LOOP('',(#347,#355,#363,#369));
+#371=FACE_BOUND('',#370,.T.);
+#372=ADVANCED_FACE('',(#371),#337,.T.);
+#373=CARTESIAN_POINT('',(161.463369711,-150.026471411,-186.796094122));
+#374=DIRECTION('',(0.500013021,-0.866017886,-0.));
+#375=DIRECTION('',(-0.866017886,-0.500013021,0.));
+#376=AXIS2_PLACEMENT_3D('',#373,#374,#375);
+#377=PLANE('',#376);
+#378=CARTESIAN_POINT('',(156.971426914,-152.619985845,-188.145080057));
+#379=VERTEX_POINT('',#378);
+#380=CARTESIAN_POINT('',(165.955312509,-147.432956977,-188.145080057));
+#381=DIRECTION('',(-0.866017886,-0.500013021,-0.));
+#382=VECTOR('',#381,10.373787585);
+#383=LINE('',#380,#382);
+#384=EDGE_CURVE('',#339,#379,#383,.T.);
+#385=ORIENTED_EDGE('',*,*,#384,.T.);
+#386=CARTESIAN_POINT('',(156.971426914,-152.619985845,-186.871080057));
+#387=VERTEX_POINT('',#386);
+#388=CARTESIAN_POINT('',(156.971426914,-152.619985845,-186.871080057));
+#389=DIRECTION('',(-0.,0.,-1.));
+#390=VECTOR('',#389,1.274);
+#391=LINE('',#388,#390);
+#392=EDGE_CURVE('',#387,#379,#391,.T.);
+#393=ORIENTED_EDGE('',*,*,#392,.F.);
+#394=CARTESIAN_POINT('',(165.955312509,-147.432956977,-186.871080057));
+#395=DIRECTION('',(-0.866017886,-0.500013021,-0.));
+#396=VECTOR('',#395,10.373787585);
+#397=LINE('',#394,#396);
+#398=EDGE_CURVE('',#349,#387,#397,.T.);
+#399=ORIENTED_EDGE('',*,*,#398,.F.);
+#400=ORIENTED_EDGE('',*,*,#354,.T.);
+#401=EDGE_LOOP('',(#385,#393,#399,#400));
+#402=FACE_BOUND('',#401,.T.);
+#403=ADVANCED_FACE('',(#402),#377,.F.);
+#404=CARTESIAN_POINT('',(156.971426914,-157.806891167,-186.796094122));
+#405=DIRECTION('',(1.,0.,-0.));
+#406=DIRECTION('',(0.,-0.,-1.));
+#407=AXIS2_PLACEMENT_3D('',#404,#405,#406);
+#408=PLANE('',#407);
+#409=CARTESIAN_POINT('',(156.971426914,-162.99379649,-188.145080057));
+#410=VERTEX_POINT('',#409);
+#411=CARTESIAN_POINT('',(156.971426914,-152.619985845,-188.145080057));
+#412=DIRECTION('',(0.,-1.,-0.));
+#413=VECTOR('',#412,10.373810645);
+#414=LINE('',#411,#413);
+#415=EDGE_CURVE('',#379,#410,#414,.T.);
+#416=ORIENTED_EDGE('',*,*,#415,.T.);
+#417=CARTESIAN_POINT('',(156.971426914,-162.99379649,-186.871080057));
+#418=VERTEX_POINT('',#417);
+#419=CARTESIAN_POINT('',(156.971426914,-162.99379649,-186.871080057));
+#420=DIRECTION('',(-0.,0.,-1.));
+#421=VECTOR('',#420,1.274);
+#422=LINE('',#419,#421);
+#423=EDGE_CURVE('',#418,#410,#422,.T.);
+#424=ORIENTED_EDGE('',*,*,#423,.F.);
+#425=CARTESIAN_POINT('',(156.971426914,-152.619985845,-186.871080057));
+#426=DIRECTION('',(0.,-1.,-0.));
+#427=VECTOR('',#426,10.373810645);
+#428=LINE('',#425,#427);
+#429=EDGE_CURVE('',#387,#418,#428,.T.);
+#430=ORIENTED_EDGE('',*,*,#429,.F.);
+#431=ORIENTED_EDGE('',*,*,#392,.T.);
+#432=EDGE_LOOP('',(#416,#424,#430,#431));
+#433=FACE_BOUND('',#432,.T.);
+#434=ADVANCED_FACE('',(#433),#408,.F.);
+#435=CARTESIAN_POINT('',(161.463369711,-165.587063958,-186.796094122));
+#436=DIRECTION('',(0.49997731,0.866038503,0.));
+#437=DIRECTION('',(0.866038503,-0.49997731,0.));
+#438=AXIS2_PLACEMENT_3D('',#435,#436,#437);
+#439=PLANE('',#438);
+#440=CARTESIAN_POINT('',(165.955312509,-168.180331426,-188.145080057));
+#441=VERTEX_POINT('',#440);
+#442=CARTESIAN_POINT('',(156.971426914,-162.99379649,-188.145080057));
+#443=DIRECTION('',(0.866038503,-0.49997731,-0.));
+#444=VECTOR('',#443,10.373540621);
+#445=LINE('',#442,#444);
+#446=EDGE_CURVE('',#410,#441,#445,.T.);
+#447=ORIENTED_EDGE('',*,*,#446,.T.);
+#448=CARTESIAN_POINT('',(165.955312509,-168.180331426,-186.871080057));
+#449=VERTEX_POINT('',#448);
+#450=CARTESIAN_POINT('',(165.955312509,-168.180331426,-186.871080057));
+#451=DIRECTION('',(-0.,0.,-1.));
+#452=VECTOR('',#451,1.274);
+#453=LINE('',#450,#452);
+#454=EDGE_CURVE('',#449,#441,#453,.T.);
+#455=ORIENTED_EDGE('',*,*,#454,.F.);
+#456=CARTESIAN_POINT('',(156.971426914,-162.99379649,-186.871080057));
+#457=DIRECTION('',(0.866038503,-0.49997731,-0.));
+#458=VECTOR('',#457,10.373540621);
+#459=LINE('',#456,#458);
+#460=EDGE_CURVE('',#418,#449,#459,.T.);
+#461=ORIENTED_EDGE('',*,*,#460,.F.);
+#462=ORIENTED_EDGE('',*,*,#423,.T.);
+#463=EDGE_LOOP('',(#447,#455,#461,#462));
+#464=FACE_BOUND('',#463,.T.);
+#465=ADVANCED_FACE('',(#464),#439,.F.);
+#466=CARTESIAN_POINT('',(170.447131889,-165.58706392,-186.796094122));
+#467=DIRECTION('',(-0.499987619,0.866032552,0.));
+#468=DIRECTION('',(0.866032552,0.499987619,-0.));
+#469=AXIS2_PLACEMENT_3D('',#466,#467,#468);
+#470=PLANE('',#469);
+#471=CARTESIAN_POINT('',(174.938951269,-162.993796414,-188.145080057));
+#472=VERTEX_POINT('',#471);
+#473=CARTESIAN_POINT('',(165.955312509,-168.180331426,-188.145080057));
+#474=DIRECTION('',(0.866032552,0.499987619,0.));
+#475=VECTOR('',#474,10.373326892);
+#476=LINE('',#473,#475);
+#477=EDGE_CURVE('',#441,#472,#476,.T.);
+#478=ORIENTED_EDGE('',*,*,#477,.T.);
+#479=CARTESIAN_POINT('',(174.938951269,-162.993796414,-186.871080057));
+#480=VERTEX_POINT('',#479);
+#481=CARTESIAN_POINT('',(174.938951269,-162.993796414,-186.871080057));
+#482=DIRECTION('',(-0.,0.,-1.));
+#483=VECTOR('',#482,1.274);
+#484=LINE('',#481,#483);
+#485=EDGE_CURVE('',#480,#472,#484,.T.);
+#486=ORIENTED_EDGE('',*,*,#485,.F.);
+#487=CARTESIAN_POINT('',(165.955312509,-168.180331426,-186.871080057));
+#488=DIRECTION('',(0.866032552,0.499987619,0.));
+#489=VECTOR('',#488,10.373326892);
+#490=LINE('',#487,#489);
+#491=EDGE_CURVE('',#449,#480,#490,.T.);
+#492=ORIENTED_EDGE('',*,*,#491,.F.);
+#493=ORIENTED_EDGE('',*,*,#454,.T.);
+#494=EDGE_LOOP('',(#478,#486,#492,#493));
+#495=FACE_BOUND('',#494,.T.);
+#496=ADVANCED_FACE('',(#495),#470,.F.);
+#497=CARTESIAN_POINT('',(164.646364125,-157.739195036,-186.796094122));
+#498=DIRECTION('',(-0.835621974,0.549304939,0.));
+#499=DIRECTION('',(0.549304939,0.835621974,-0.));
+#500=AXIS2_PLACEMENT_3D('',#497,#498,#499);
+#501=PLANE('',#500);
+#502=CARTESIAN_POINT('',(160.544188957,-163.979568034,-188.145080057));
+#503=DIRECTION('',(0.549304939,0.835621974,0.));
+#504=VECTOR('',#503,14.935875772);
+#505=LINE('',#502,#504);
+#506=EDGE_CURVE('',#206,#135,#505,.T.);
+#507=ORIENTED_EDGE('',*,*,#506,.T.);
+#508=ORIENTED_EDGE('',*,*,#164,.F.);
+#509=CARTESIAN_POINT('',(160.544188957,-163.979568034,-186.871080057));
+#510=DIRECTION('',(0.549304939,0.835621974,0.));
+#511=VECTOR('',#510,14.935875772);
+#512=LINE('',#509,#511);
+#513=EDGE_CURVE('',#214,#153,#512,.T.);
+#514=ORIENTED_EDGE('',*,*,#513,.F.);
+#515=ORIENTED_EDGE('',*,*,#219,.T.);
+#516=EDGE_LOOP('',(#507,#508,#514,#515));
+#517=FACE_BOUND('',#516,.T.);
+#518=ADVANCED_FACE('',(#517),#501,.F.);
+#519=CARTESIAN_POINT('',(161.509168729,-154.922592048,-186.796094122));
+#520=DIRECTION('',(-0.835635893,0.549283764,0.));
+#521=DIRECTION('',(0.549283764,0.835635893,-0.));
+#522=AXIS2_PLACEMENT_3D('',#519,#520,#521);
+#523=PLANE('',#522);
+#524=CARTESIAN_POINT('',(159.258641562,-158.346362058,-188.145080057));
+#525=DIRECTION('',(0.549283764,0.835635893,0.));
+#526=VECTOR('',#525,8.19440629);
+#527=LINE('',#524,#526);
+#528=EDGE_CURVE('',#308,#237,#527,.T.);
+#529=ORIENTED_EDGE('',*,*,#528,.T.);
+#530=ORIENTED_EDGE('',*,*,#266,.F.);
+#531=CARTESIAN_POINT('',(159.258641562,-158.346362058,-186.871080057));
+#532=DIRECTION('',(0.549283764,0.835635893,0.));
+#533=VECTOR('',#532,8.19440629);
+#534=LINE('',#531,#533);
+#535=EDGE_CURVE('',#316,#255,#534,.T.);
+#536=ORIENTED_EDGE('',*,*,#535,.F.);
+#537=ORIENTED_EDGE('',*,*,#321,.T.);
+#538=EDGE_LOOP('',(#529,#530,#536,#537));
+#539=FACE_BOUND('',#538,.T.);
+#540=ADVANCED_FACE('',(#539),#523,.F.);
+#541=CARTESIAN_POINT('',(174.938951269,-157.806891167,-186.796094122));
+#542=DIRECTION('',(-1.,-0.,0.));
+#543=DIRECTION('',(-0.,0.,1.));
+#544=AXIS2_PLACEMENT_3D('',#541,#542,#543);
+#545=PLANE('',#544);
+#546=CARTESIAN_POINT('',(174.938951269,-162.993796414,-188.145080057));
+#547=DIRECTION('',(-0.,1.,0.));
+#548=VECTOR('',#547,10.373810493);
+#549=LINE('',#546,#548);
+#550=EDGE_CURVE('',#472,#341,#549,.T.);
+#551=ORIENTED_EDGE('',*,*,#550,.T.);
+#552=ORIENTED_EDGE('',*,*,#368,.F.);
+#553=CARTESIAN_POINT('',(174.938951269,-162.993796414,-186.871080057));
+#554=DIRECTION('',(-0.,1.,0.));
+#555=VECTOR('',#554,10.373810493);
+#556=LINE('',#553,#555);
+#557=EDGE_CURVE('',#480,#357,#556,.T.);
+#558=ORIENTED_EDGE('',*,*,#557,.F.);
+#559=ORIENTED_EDGE('',*,*,#485,.T.);
+#560=EDGE_LOOP('',(#551,#552,#558,#559));
+#561=FACE_BOUND('',#560,.T.);
+#562=ADVANCED_FACE('',(#561),#545,.F.);
+#563=CARTESIAN_POINT('',(171.386865091,-157.132274717,-186.796094122));
+#564=DIRECTION('',(-0.,1.,0.));
+#565=DIRECTION('',(-0.,-0.,1.));
+#566=AXIS2_PLACEMENT_3D('',#563,#564,#565);
+#567=PLANE('',#566);
+#568=CARTESIAN_POINT('',(170.033055322,-157.132274717,-188.145080057));
+#569=DIRECTION('',(1.,0.,-0.));
+#570=VECTOR('',#569,2.70761954);
+#571=LINE('',#568,#570);
+#572=EDGE_CURVE('',#104,#33,#571,.T.);
+#573=ORIENTED_EDGE('',*,*,#572,.T.);
+#574=ORIENTED_EDGE('',*,*,#62,.F.);
+#575=CARTESIAN_POINT('',(170.033055322,-157.132274717,-186.871080057));
+#576=DIRECTION('',(1.,0.,-0.));
+#577=VECTOR('',#576,2.70761954);
+#578=LINE('',#575,#577);
+#579=EDGE_CURVE('',#112,#51,#578,.T.);
+#580=ORIENTED_EDGE('',*,*,#579,.F.);
+#581=ORIENTED_EDGE('',*,*,#117,.T.);
+#582=EDGE_LOOP('',(#573,#574,#580,#581));
+#583=FACE_BOUND('',#582,.T.);
+#584=ADVANCED_FACE('',(#583),#567,.F.);
+#585=CARTESIAN_POINT('',(165.955197618,-157.806743619,-186.871080057));
+#586=DIRECTION('',(0.,-0.,1.));
+#587=DIRECTION('',(0.,-1.,-0.));
+#588=AXIS2_PLACEMENT_3D('',#585,#586,#587);
+#589=PLANE('',#588);
+#590=ORIENTED_EDGE('',*,*,#362,.F.);
+#591=ORIENTED_EDGE('',*,*,#398,.T.);
+#592=ORIENTED_EDGE('',*,*,#429,.T.);
+#593=ORIENTED_EDGE('',*,*,#460,.T.);
+#594=ORIENTED_EDGE('',*,*,#491,.T.);
+#595=ORIENTED_EDGE('',*,*,#557,.T.);
+#596=EDGE_LOOP('',(#590,#591,#592,#593,#594,#595));
+#597=FACE_BOUND('',#596,.T.);
+#598=ORIENTED_EDGE('',*,*,#260,.T.);
+#599=ORIENTED_EDGE('',*,*,#296,.T.);
+#600=ORIENTED_EDGE('',*,*,#327,.T.);
+#601=ORIENTED_EDGE('',*,*,#535,.T.);
+#602=EDGE_LOOP('',(#598,#599,#600,#601));
+#603=FACE_BOUND('',#602,.T.);
+#604=ORIENTED_EDGE('',*,*,#158,.T.);
+#605=ORIENTED_EDGE('',*,*,#194,.T.);
+#606=ORIENTED_EDGE('',*,*,#225,.T.);
+#607=ORIENTED_EDGE('',*,*,#513,.T.);
+#608=EDGE_LOOP('',(#604,#605,#606,#607));
+#609=FACE_BOUND('',#608,.T.);
+#610=ORIENTED_EDGE('',*,*,#56,.T.);
+#611=ORIENTED_EDGE('',*,*,#92,.T.);
+#612=ORIENTED_EDGE('',*,*,#123,.T.);
+#613=ORIENTED_EDGE('',*,*,#579,.T.);
+#614=EDGE_LOOP('',(#610,#611,#612,#613));
+#615=FACE_BOUND('',#614,.T.);
+#616=ADVANCED_FACE('',(#597,#603,#609,#615),#589,.T.);
+#617=CARTESIAN_POINT('',(165.955197618,-157.806743619,-188.145080057));
+#618=DIRECTION('',(0.,-0.,1.));
+#619=DIRECTION('',(0.,-1.,-0.));
+#620=AXIS2_PLACEMENT_3D('',#617,#618,#619);
+#621=PLANE('',#620);
+#622=ORIENTED_EDGE('',*,*,#346,.T.);
+#623=ORIENTED_EDGE('',*,*,#550,.F.);
+#624=ORIENTED_EDGE('',*,*,#477,.F.);
+#625=ORIENTED_EDGE('',*,*,#446,.F.);
+#626=ORIENTED_EDGE('',*,*,#415,.F.);
+#627=ORIENTED_EDGE('',*,*,#384,.F.);
+#628=EDGE_LOOP('',(#622,#623,#624,#625,#626,#627));
+#629=FACE_BOUND('',#628,.T.);
+#630=ORIENTED_EDGE('',*,*,#244,.F.);
+#631=ORIENTED_EDGE('',*,*,#528,.F.);
+#632=ORIENTED_EDGE('',*,*,#313,.F.);
+#633=ORIENTED_EDGE('',*,*,#282,.F.);
+#634=EDGE_LOOP('',(#630,#631,#632,#633));
+#635=FACE_BOUND('',#634,.T.);
+#636=ORIENTED_EDGE('',*,*,#142,.F.);
+#637=ORIENTED_EDGE('',*,*,#506,.F.);
+#638=ORIENTED_EDGE('',*,*,#211,.F.);
+#639=ORIENTED_EDGE('',*,*,#180,.F.);
+#640=EDGE_LOOP('',(#636,#637,#638,#639));
+#641=FACE_BOUND('',#640,.T.);
+#642=ORIENTED_EDGE('',*,*,#40,.F.);
+#643=ORIENTED_EDGE('',*,*,#572,.F.);
+#644=ORIENTED_EDGE('',*,*,#109,.F.);
+#645=ORIENTED_EDGE('',*,*,#78,.F.);
+#646=EDGE_LOOP('',(#642,#643,#644,#645));
+#647=FACE_BOUND('',#646,.T.);
+#648=ADVANCED_FACE('',(#629,#635,#641,#647),#621,.F.);
+#649=CLOSED_SHELL('',(#66,#97,#128,#168,#199,#230,#270,#301,#332,#372,#403,#434,#465,#496,#518,#540,#562,#584,#616,#648));
+#650=MANIFOLD_SOLID_BREP('LED Front Bed Logo',#649);
+#651=COLOUR_RGB('',0.996078432,0.996078432,0.996078432);
+#652=FILL_AREA_STYLE_COLOUR('',#651);
+#653=FILL_AREA_STYLE('',(#652));
+#654=SURFACE_STYLE_FILL_AREA(#653);
+#655=SURFACE_SIDE_STYLE('',(#654));
+#656=SURFACE_STYLE_USAGE(.BOTH.,#655);
+#657=PRESENTATION_STYLE_ASSIGNMENT((#656));
+#26=STYLED_ITEM('',(#657),#650);
+#16=SHAPE_REPRESENTATION('LED Front Bed Logo',(#15),#10);
+#17=ADVANCED_BREP_SHAPE_REPRESENTATION('LED Front Bed Logo',(#650),#10);
+#665=SHAPE_REPRESENTATION_RELATIONSHIP('','',#16,#17);
+#666=APPLICATION_CONTEXT('configuration controlled 3D design of mechanical parts and assemblies');
+#667=APPLICATION_PROTOCOL_DEFINITION('international standard','configuration_control_3d_design_ed2_mim',2004,#666);
+#668=PRODUCT_CONTEXT('',#666,'mechanical');
+#669=PRODUCT_DEFINITION_CONTEXT('part definition',#666,'design');
+#24=PRODUCT('LED Front Bed Logo','LED Front Bed Logo','',(#668));
+#670=PRODUCT_RELATED_PRODUCT_CATEGORY('part','',(#24));
+#671=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','',#24,.NOT_KNOWN.);
+#25=PRODUCT_DEFINITION('design','',#671,#669);
+#23=PRODUCT_DEFINITION_SHAPE('','',#25);
+#672=SHAPE_DEFINITION_REPRESENTATION(#23,#16);
+#11=DRAUGHTING_MODEL('',(),#10);
+#1=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#26),#10);
+ENDSEC;
+END-ISO-10303-21;

printer_mods/Maverick_/V0_LED_Hinge/ReadMe.md

@@ -0,0 +1,7 @@
+# V0 LED Hinge
+
+This modification was designed to accomodate a Neopixel Jewel (7) in the top right hinge of the front door. A channel is present in "Right Bracket LED" to allow for wiring to be ran straight down the upright extrusion, however, a notch can be cut out of the upper portion of the bracket to allow for wiring along the top right horizontal extrusion.
+
+The lights can be controlled with an Arduino Nano, Klipper, or an Octoprint Plugin. 
+
+![LED Hinge 2](Images/LED_Hinge_Model_Front.PNG)

printer_mods/Maverick_/V0_TopHat_Mini_12864/ReadMe.md

@@ -0,0 +1,66 @@
+# V0 TopHat Mini 12864
+
+I wanted to have the ability to use the V2 display with my V0, so designed this mod to allow for it. Although they look similar, the Mini 12864 front and back case files have been slightly altered to accomodate this design.
+
+#
+
+## Config for SKR Mini E3 V2
+
+Below are the pins that I used in Klipper for the display and a really bad representation of the wiring I performed.
+
+
+[display]
+
+lcd_type: uc1701
+
+cs_pin: PB9
+
+a0_pin: PB8
+
+rst_pin: PB15
+
+encoder_pins: ^PB5,^PA15
+
+click_pin: ^!PA10
+
+contrast: 63
+
+
+spi_software_sclk_pin: PA5
+
+spi_software_mosi_pin: PA7
+
+spi_software_miso_pin: PA6
+
+
+[neopixel fysetc_mini12864]
+
+pin: PA9
+
+chain_count: 3
+
+color_order_GRB: False
+
+initial_RED: 0.3
+
+initial_GREEN: 0.3
+
+initial_BLUE: 0.5
+
+
+![Wiring](Images/Mini_E3_V2_Mini_12864_Wiring.png)
+
+
+#
+
+## Mount It!
+
+M3 threaded inserts are used in the lower wall of the back case file, this allows for M3 screws to be ran through the TopHat pieces into the case, resulting in a solid configuration. 
+
+The parts are in the correct orientation for printing.
+
+
+
+
+![TopHat Mini 12864 1](Images/TopHat_Mini_12864_Front.jpg)
+

printer_mods/README.md

@@ -81,6 +81,11 @@ like so:
 |madros |[V0 OLED-skirt](./madros/V0_skirt_OLED) |V0 skirt with 0.96" OLED|:heavy_check_mark: |:x: |:x: |:x:|
 |MarcPot |[UHP PSU Bracket Clip](./MarcPot/UHP_PSU_Bracket_Clip)|DIN rail mount for the Mean Well UHP series PSU. |:grey_question: |:grey_question: |:heavy_check_mark: |:x:|
 | |[Hour Counter Skirt + Keystone Skirt](./MarcPot/Skirt_Mods)|Skirt mod for a mechanical hour counter and keystone inserts |:x: |:x: |:heavy_check_mark: |:x:|
+|Maverick_ | [V0 C14 Inlet](./Maverick_/V0_C14_Inlet_Foot) | A modification to the rear foot of the V0 to allow for the addition of a C14 Inlet. | :heavy_check_mark: | :x: | :x: |:x:|
+| | [V0 Deck Logo](./Maverick_/V0_Deck_Logo_LED) | A lower deck panel addition to the V0, designed to accomodate a Neopixel Ring. | :heavy_check_mark: | :x: | :x: |:x:|
+| | [V0 LED Front Bed Mount](./Maverick_/V0_LED_Front_Bed_Mount) | A modification designed to accomodate a Neopixel Jewel (7) in the face of the front bed mount. | :heavy_check_mark: | :x: | :x: |:x:|
+| | [V0 LED Hinge](./Maverick_/V0_LED_Hinge) | A modification designed to accomodate a Neopixel Jewel (7) in the top right hinge of the door. | :heavy_check_mark: | :x: | :x: |:x:|
+| | [V0 TopHat Mini 12864](./Maverick_/V0_TopHat_Mini_12864) | Modified TopHat to mount a Mini 12864. | :heavy_check_mark: | :x: | :x: |:x:|
 |mjoaris |[10x11 Cable Chain Endcaps](./mjoaris/10x11_Cable_Chain_Endcaps) |Printable Endcaps for 10x11 Cable Chains |:x: |:heavy_check_mark: |:heavy_check_mark: |:x:|
 | |[Mini12864 LCD Mount](./mjoaris/Mini12864_LCD_Mount_for_V2.4) |Swiveling case for the Fysetc Mini12864 LCD |:x: |:grey_question: |:heavy_check_mark: |:x:|
 |Mosher|[Door hinges with M3 screws shafts](./mosher/m3_door_hinges) |Simple mod of print in place door hinges, which uses m3 screws as shafts. |:x:|:x:|:heavy_check_mark:|:x:|