Assembly guide Assembly guide
+## 
Assembly guide
diff --git a/printer_mods/dury10/Spartacus/assembly.md b/printer_mods/dury10/Spartacus/assembly.md
index 2c3937a68..8b3757b57 100644
--- a/printer_mods/dury10/Spartacus/assembly.md
+++ b/printer_mods/dury10/Spartacus/assembly.md
@@ -2,11 +2,11 @@
## Here you can find how to modify the heatsink if you go with the V6 heatsink
-### 
+### 
## Here is the guide how to assamble the tooldead
-###
+###
diff --git a/printer_mods/dury10/Spartacus/toolhead_assembly.md b/printer_mods/dury10/Spartacus/toolhead_assembly.md
index 31500303c..19fcae5e6 100644
--- a/printer_mods/dury10/Spartacus/toolhead_assembly.md
+++ b/printer_mods/dury10/Spartacus/toolhead_assembly.md
@@ -3,12 +3,12 @@
+
+####
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
here we have the most common V6 heatsinks
+ 
Bowden and Direct drive Style
+ 
+ 
Here is where we will make the cut
+ 
I have used an angle grinder to cut the upper part, but you can use a hack saw
- 
+ 
This is how it is supposed to like after the cut
+ 
+ 
+ 
As you can see i prefer the bowden stile heat sink
+ 
+ 
+ 
Put the heatsink in the V6 Holder
+ 
+ 
+ 
And use 2 M3x40 screw + 2x M3 nuts to secure it in place
+ 
+ 
+ 
+ 
Use a 2.5mm Dril bit and drill 2 holes in the designated locations
+ 
+ 
+ 
+ 
+ 
Clean the debrie and prepare your M3 TAP
Carefully cut some treads 3-5mm
+ 
+ 
After cleaning the threads, now you can screw 2x M3x4, M3x5 or M3x6 I prefer the M3x4 saving weight.
+ 
Remove everything and clean all the mess
+ 
+ 
It should look like this
+ 
+ 
+ 