diff --git a/legacy_printers/printer_mods/3D_Black/Fan_Covers/.metadata.yml b/legacy_printers/printer_mods/3D_Black/Fan_Covers/.metadata.yml index 01c431914..b2dd4e580 100644 --- a/legacy_printers/printer_mods/3D_Black/Fan_Covers/.metadata.yml +++ b/legacy_printers/printer_mods/3D_Black/Fan_Covers/.metadata.yml @@ -8,4 +8,7 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- Fan_cover_2holes.STL +- Fan_cover_4holes.STL title: Fan Covers diff --git a/legacy_printers/printer_mods/Armstr0ng/Led_extrusions_mount/.metadata.yml b/legacy_printers/printer_mods/Armstr0ng/Led_extrusions_mount/.metadata.yml index 3901b4ca2..1eb97c5de 100644 --- a/legacy_printers/printer_mods/Armstr0ng/Led_extrusions_mount/.metadata.yml +++ b/legacy_printers/printer_mods/Armstr0ng/Led_extrusions_mount/.metadata.yml @@ -5,4 +5,8 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- led-extrusion-cap-left.stl +- led-extrusion-cap-right.stl +- led-extrusion-link.stl title: Led extrusions mount diff --git a/legacy_printers/printer_mods/ArmyAg08/Logitech_C270_Mounts/.metadata.yml b/legacy_printers/printer_mods/ArmyAg08/Logitech_C270_Mounts/.metadata.yml index 19c466190..cc85a5f96 100644 --- a/legacy_printers/printer_mods/ArmyAg08/Logitech_C270_Mounts/.metadata.yml +++ b/legacy_printers/printer_mods/ArmyAg08/Logitech_C270_Mounts/.metadata.yml @@ -11,4 +11,8 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- 2020_Cable_Cover.stl +- Center_Frame_Mount.stl +- Gantry_Corner_Mount.stl title: Logitech Camera Mounts diff --git a/legacy_printers/printer_mods/ArmyAg08/Panels/.metadata.yml b/legacy_printers/printer_mods/ArmyAg08/Panels/.metadata.yml index 77f185369..69815f59d 100644 --- a/legacy_printers/printer_mods/ArmyAg08/Panels/.metadata.yml +++ b/legacy_printers/printer_mods/ArmyAg08/Panels/.metadata.yml @@ -5,4 +5,6 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- corner_panel_clip_0.125in_version_x12.stl title: Corner Panel Clip diff --git a/legacy_printers/printer_mods/Badnoob/Serial_Plate/.metadata.yml b/legacy_printers/printer_mods/Badnoob/Serial_Plate/.metadata.yml index 7ac8b12ab..9212349c9 100644 --- a/legacy_printers/printer_mods/Badnoob/Serial_Plate/.metadata.yml +++ b/legacy_printers/printer_mods/Badnoob/Serial_Plate/.metadata.yml @@ -4,4 +4,6 @@ images: [] mod_version: 1 printer_compatibility: - V2.2 +stl: +- voronserial_300.stl title: Serial Plate diff --git a/legacy_printers/printer_mods/Cerulean/Respooler/.metadata.yml b/legacy_printers/printer_mods/Cerulean/Respooler/.metadata.yml index 19f337a5a..a7af201be 100644 --- a/legacy_printers/printer_mods/Cerulean/Respooler/.metadata.yml +++ b/legacy_printers/printer_mods/Cerulean/Respooler/.metadata.yml @@ -6,4 +6,7 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- Esun_Spool_Winder_Drill_V2.STL +- Esun_Spool_Winder_V2.STL title: Respooler diff --git a/legacy_printers/printer_mods/Danowar/AltZChain/.metadata.yml b/legacy_printers/printer_mods/Danowar/AltZChain/.metadata.yml index 76ef9441d..cfa968cf1 100644 --- a/legacy_printers/printer_mods/Danowar/AltZChain/.metadata.yml +++ b/legacy_printers/printer_mods/Danowar/AltZChain/.metadata.yml @@ -1,10 +1,13 @@ cad: [] description: Alternative mounting for Z-Axis zipchain images: - - AltZChain2.jpg - - AltZChain1.jpg +- AltZChain2.jpg +- AltZChain1.jpg mod_version: 1 printer_compatibility: - - V2.1 - - V2.2 +- V2.1 +- V2.2 +stl: +- Z_Anchor.stl +- Z_Anchor_Standoff.stl title: Alternative Z Chain diff --git a/legacy_printers/printer_mods/Danowar/Dual_Mobuis_Mount/.metadata.yml b/legacy_printers/printer_mods/Danowar/Dual_Mobuis_Mount/.metadata.yml index 5ffa6b96d..7672513eb 100644 --- a/legacy_printers/printer_mods/Danowar/Dual_Mobuis_Mount/.metadata.yml +++ b/legacy_printers/printer_mods/Danowar/Dual_Mobuis_Mount/.metadata.yml @@ -7,4 +7,6 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- Dual_Mobuis_Mount.stl title: Dual Mobius Mount diff --git a/legacy_printers/printer_mods/Danowar/F6_Board_Mount/.metadata.yml b/legacy_printers/printer_mods/Danowar/F6_Board_Mount/.metadata.yml index d8902da94..2e2afadfb 100644 --- a/legacy_printers/printer_mods/Danowar/F6_Board_Mount/.metadata.yml +++ b/legacy_printers/printer_mods/Danowar/F6_Board_Mount/.metadata.yml @@ -7,4 +7,7 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- dual_F6_V13_frame_a.stl +- dual_F6_V13_frame_b.stl title: F6 Board Mount diff --git a/legacy_printers/printer_mods/Danowar/Humidity_Sensor_Bracket/.metadata.yml b/legacy_printers/printer_mods/Danowar/Humidity_Sensor_Bracket/.metadata.yml index 3ac8412f3..75145182b 100644 --- a/legacy_printers/printer_mods/Danowar/Humidity_Sensor_Bracket/.metadata.yml +++ b/legacy_printers/printer_mods/Danowar/Humidity_Sensor_Bracket/.metadata.yml @@ -8,4 +8,6 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- Bracket.stl title: Humidity Sensor Bracket diff --git a/legacy_printers/printer_mods/Danowar/Load_Cell_Spool_Holder/.metadata.yml b/legacy_printers/printer_mods/Danowar/Load_Cell_Spool_Holder/.metadata.yml index 170e9f6ec..5cdb1082a 100644 --- a/legacy_printers/printer_mods/Danowar/Load_Cell_Spool_Holder/.metadata.yml +++ b/legacy_printers/printer_mods/Danowar/Load_Cell_Spool_Holder/.metadata.yml @@ -6,4 +6,7 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- Base.stl +- Holder.stl title: Load Cell Spool Holder diff --git a/legacy_printers/printer_mods/Danowar/TL_2-to-1_Mosquito_Toolhead_Adapter/.metadata.yml b/legacy_printers/printer_mods/Danowar/TL_2-to-1_Mosquito_Toolhead_Adapter/.metadata.yml index fd230f713..6dd231adb 100644 --- a/legacy_printers/printer_mods/Danowar/TL_2-to-1_Mosquito_Toolhead_Adapter/.metadata.yml +++ b/legacy_printers/printer_mods/Danowar/TL_2-to-1_Mosquito_Toolhead_Adapter/.metadata.yml @@ -1,12 +1,16 @@ cad: [] description: Mounts the Triangle Labs 2-to-1 adapter directly to the mosquito toolhead images: - - 20191013_202745.jpg - - 20191013_202725.jpg - - 20191013_202806.jpg +- 20191013_202745.jpg +- 20191013_202725.jpg +- 20191013_202806.jpg mod_version: 1 printer_compatibility: - - V1.6 - - V2.1 - - V2.2 +- V1.6 +- V2.1 +- V2.2 +stl: +- connector_cover_a.stl +- connector_cover_b.stl +- Y_Splitter_Adapter.stl title: TL 2-to-1 Mosquito Toolhead Adapter diff --git a/legacy_printers/printer_mods/Danowar/Tablet_Mount/.metadata.yml b/legacy_printers/printer_mods/Danowar/Tablet_Mount/.metadata.yml index 185c4edea..340568df5 100644 --- a/legacy_printers/printer_mods/Danowar/Tablet_Mount/.metadata.yml +++ b/legacy_printers/printer_mods/Danowar/Tablet_Mount/.metadata.yml @@ -6,4 +6,7 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- Tablet_Adapter.stl +- Tablet_Mount.stl title: Tablet mount diff --git a/legacy_printers/printer_mods/Danowar/V2.2_Wrench/.metadata.yml b/legacy_printers/printer_mods/Danowar/V2.2_Wrench/.metadata.yml index 744aa2eca..ecfac879d 100644 --- a/legacy_printers/printer_mods/Danowar/V2.2_Wrench/.metadata.yml +++ b/legacy_printers/printer_mods/Danowar/V2.2_Wrench/.metadata.yml @@ -6,4 +6,6 @@ images: mod_version: 1 printer_compatibility: - V2.2 +stl: +- 2.2_Wrench.stl title: V2.2 Wrench diff --git a/legacy_printers/printer_mods/Dunar/Panel_Rest/.metadata.yml b/legacy_printers/printer_mods/Dunar/Panel_Rest/.metadata.yml index cc39db157..44139a266 100644 --- a/legacy_printers/printer_mods/Dunar/Panel_Rest/.metadata.yml +++ b/legacy_printers/printer_mods/Dunar/Panel_Rest/.metadata.yml @@ -9,4 +9,10 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- _opt_support_bracket_6mm_lsh.stl +- _opt_support_bracket_6mm_rsh.stl +- _opt_support_bracket_vslot_lsh.stl +- _opt_support_bracket_vslot_rsh.stl +- _panel_rest_x3.stl title: Panel Rest diff --git a/legacy_printers/printer_mods/FHeilmann/VORON2.1_5mm_parts/.metadata.yml b/legacy_printers/printer_mods/FHeilmann/VORON2.1_5mm_parts/.metadata.yml index a0315b2ec..20d504372 100644 --- a/legacy_printers/printer_mods/FHeilmann/VORON2.1_5mm_parts/.metadata.yml +++ b/legacy_printers/printer_mods/FHeilmann/VORON2.1_5mm_parts/.metadata.yml @@ -4,4 +4,17 @@ images: [] mod_version: 1 printer_compatibility: - V2.1 +stl: +- idler_frame_left_lower_5mm.stl +- idler_frame_left_upper_5mm.stl +- idler_frame_right_lower_5mm.stl +- idler_frame_right_upper_5mm.stl +- lock_body_5mm_x4.stl +- mount_base_a_5mm.stl +- mount_base_b_5mm.stl +- z_cable_gantry_anchor_5mm.stl +- z_drive_front_support_a_5mm_x2.stl +- z_drive_front_support_b_5mm_x2.stl +- z_drive_rear_support_a_5mm_x2.stl +- z_drive_rear_support_b_5mm_x2.stl title: Voron 2.1 5mm Parts diff --git a/legacy_printers/printer_mods/Fulg/PanelDue5/.metadata.yml b/legacy_printers/printer_mods/Fulg/PanelDue5/.metadata.yml index 400e7b42d..d5eeef351 100644 --- a/legacy_printers/printer_mods/Fulg/PanelDue5/.metadata.yml +++ b/legacy_printers/printer_mods/Fulg/PanelDue5/.metadata.yml @@ -7,4 +7,7 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- STL/V2_PanelDue5_Bottom.stl +- STL/V2_PanelDue5_Top.stl title: PanelDue5 LCD Mount diff --git a/legacy_printers/printer_mods/GSL12/wago_221_mount/.metadata.yml b/legacy_printers/printer_mods/GSL12/wago_221_mount/.metadata.yml index 4b21dd37f..a495ff129 100644 --- a/legacy_printers/printer_mods/GSL12/wago_221_mount/.metadata.yml +++ b/legacy_printers/printer_mods/GSL12/wago_221_mount/.metadata.yml @@ -9,4 +9,8 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- WAGO_221-413_mount-2x3.stl +- WAGO_221-413_mount-3x3.stl +- WAGO_221-415_mount-3x5.stl title: WAGO 221 Mounts diff --git a/legacy_printers/printer_mods/Gamsche/skirt_keystone/.metadata.yml b/legacy_printers/printer_mods/Gamsche/skirt_keystone/.metadata.yml index 9e09618ef..9a33a9e21 100644 --- a/legacy_printers/printer_mods/Gamsche/skirt_keystone/.metadata.yml +++ b/legacy_printers/printer_mods/Gamsche/skirt_keystone/.metadata.yml @@ -5,4 +5,6 @@ images: [] mod_version: 1 printer_compatibility: - V2.2 +stl: +- skirt_keystone_jack.stl title: Keystone Skirt Panel diff --git a/legacy_printers/printer_mods/Glowtape/MKS_GenL_1.0_Mounting_Bracket/.metadata.yml b/legacy_printers/printer_mods/Glowtape/MKS_GenL_1.0_Mounting_Bracket/.metadata.yml index d505c4c35..499b8fe00 100644 --- a/legacy_printers/printer_mods/Glowtape/MKS_GenL_1.0_Mounting_Bracket/.metadata.yml +++ b/legacy_printers/printer_mods/Glowtape/MKS_GenL_1.0_Mounting_Bracket/.metadata.yml @@ -8,4 +8,7 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- STL/MKS_GenL_v1.0_Bracket_A.stl +- STL/MKS_GenL_v1.0_Bracket_B.stl title: MKS GenL 1.0 Mounting Bracket diff --git a/legacy_printers/printer_mods/GustavtheMighty/4.3-Paneldue_Case/.metadata.yml b/legacy_printers/printer_mods/GustavtheMighty/4.3-Paneldue_Case/.metadata.yml index e3d6ce556..03605374c 100644 --- a/legacy_printers/printer_mods/GustavtheMighty/4.3-Paneldue_Case/.metadata.yml +++ b/legacy_printers/printer_mods/GustavtheMighty/4.3-Paneldue_Case/.metadata.yml @@ -7,4 +7,7 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- 4.3_PD_Back.stl +- 4.3_PD_Front.stl title: 4.3 PanelDue Case diff --git a/legacy_printers/printer_mods/Iakabos/Mini12864_display_mount/.metadata.yml b/legacy_printers/printer_mods/Iakabos/Mini12864_display_mount/.metadata.yml index 4c71a9eef..ac67237c9 100644 --- a/legacy_printers/printer_mods/Iakabos/Mini12864_display_mount/.metadata.yml +++ b/legacy_printers/printer_mods/Iakabos/Mini12864_display_mount/.metadata.yml @@ -6,4 +6,15 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- Back.stl +- Case_arm(Mirror).stl +- Case_arm.stl +- Front.stl +- Mount_block(Mirror).stl +- Mount_block.stl +- Swingarm_long(Mirror).stl +- Swingarm_long.stl +- Swingarm_short(Mirror).stl +- Swingarm_short.stl title: Mini12864 Display Mount diff --git a/legacy_printers/printer_mods/JaredC01/Keystone_Power_Panel/.metadata.yml b/legacy_printers/printer_mods/JaredC01/Keystone_Power_Panel/.metadata.yml index f0aa81ba1..f11db1dae 100644 --- a/legacy_printers/printer_mods/JaredC01/Keystone_Power_Panel/.metadata.yml +++ b/legacy_printers/printer_mods/JaredC01/Keystone_Power_Panel/.metadata.yml @@ -6,4 +6,7 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- keystone_double.stl +- keystone_single.stl title: Keystone Power Panel diff --git a/legacy_printers/printer_mods/JaredC01/Mini_12864_Voron_Knob/.metadata.yml b/legacy_printers/printer_mods/JaredC01/Mini_12864_Voron_Knob/.metadata.yml index d1c6c1b94..ad3ffd7b0 100644 --- a/legacy_printers/printer_mods/JaredC01/Mini_12864_Voron_Knob/.metadata.yml +++ b/legacy_printers/printer_mods/JaredC01/Mini_12864_Voron_Knob/.metadata.yml @@ -1,11 +1,13 @@ cad: [] description: Upgraded knob for Fystec Mini 12864 RGB LED Display images: - - knoblight.jpg - - knobdark.jpg +- knoblight.jpg +- knobdark.jpg mod_version: 1 printer_compatibility: - - V1.6 - - V2.1 - - V2.2 +- V1.6 +- V2.1 +- V2.2 +stl: +- Mini_12864_Knob_Full.stl title: Mini 12864 Voron Knob diff --git a/legacy_printers/printer_mods/JaredC01/Mosfet_Mounts/.metadata.yml b/legacy_printers/printer_mods/JaredC01/Mosfet_Mounts/.metadata.yml index be25ade63..b2cdda272 100644 --- a/legacy_printers/printer_mods/JaredC01/Mosfet_Mounts/.metadata.yml +++ b/legacy_printers/printer_mods/JaredC01/Mosfet_Mounts/.metadata.yml @@ -8,4 +8,7 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- Mosfet_Mount_4.stl +- Mosfet_Mount_6.stl title: Mosfet Mounts diff --git a/legacy_printers/printer_mods/Jasperkm/5mm_panel_mounting/.metadata.yml b/legacy_printers/printer_mods/Jasperkm/5mm_panel_mounting/.metadata.yml index 4ac4f1e10..584214b34 100644 --- a/legacy_printers/printer_mods/Jasperkm/5mm_panel_mounting/.metadata.yml +++ b/legacy_printers/printer_mods/Jasperkm/5mm_panel_mounting/.metadata.yml @@ -5,4 +5,11 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- Front_panel/lock_body_5mm_x4_Rev1.STL +- Front_panel/[a]_latch_lhs_5mm_x2_rev1.STL +- Front_panel/[a]_latch_rhs_5mm_x2_rev1.STL +- Side_and_top_panels/corner_lock_body_5mm_x12_Rev1.stl +- Side_and_top_panels/lock_body_5mm_x10_Rev1.STL +- Side_and_top_panels/[a]_key_5mm_x34_rev1.STL title: 5mm panel mounting diff --git a/legacy_printers/printer_mods/Jasperkm/Brush_holder/.metadata.yml b/legacy_printers/printer_mods/Jasperkm/Brush_holder/.metadata.yml index 1992ced24..2cb32b8c3 100644 --- a/legacy_printers/printer_mods/Jasperkm/Brush_holder/.metadata.yml +++ b/legacy_printers/printer_mods/Jasperkm/Brush_holder/.metadata.yml @@ -5,4 +5,7 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- brush_holder_long.STL +- brush_holder_short.STL title: Brush holder diff --git a/legacy_printers/printer_mods/Jasperkm/Cable_management/.metadata.yml b/legacy_printers/printer_mods/Jasperkm/Cable_management/.metadata.yml index d3e97e36e..a2d840432 100644 --- a/legacy_printers/printer_mods/Jasperkm/Cable_management/.metadata.yml +++ b/legacy_printers/printer_mods/Jasperkm/Cable_management/.metadata.yml @@ -6,4 +6,14 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- 2020_slotcover.stl +- Cabletrunk_W25_H35_L125_x2.STL +- Cabletrunk_W25_H35_L205_x1.STL +- Cabletrunk_W25_H35_L240_x1.STL +- Cabletrunk_W35_H35_L125.STL +- Cabletrunk_W35_H35_L205.STL +- Cabletrunk_W35_H35_L240.STL +- Cabletrunk_W50_H50_L205.STL +- wago222_mount_compact.STL title: Cable management diff --git a/legacy_printers/printer_mods/Jasperkm/Exhaust_fan_guard/.metadata.yml b/legacy_printers/printer_mods/Jasperkm/Exhaust_fan_guard/.metadata.yml index 3e8cf2d25..559919959 100644 --- a/legacy_printers/printer_mods/Jasperkm/Exhaust_fan_guard/.metadata.yml +++ b/legacy_printers/printer_mods/Jasperkm/Exhaust_fan_guard/.metadata.yml @@ -5,4 +5,6 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- exhaust_fan_guard.STL title: Exhaust fan guard diff --git a/legacy_printers/printer_mods/Jasperkm/Fire_alarm_mount/.metadata.yml b/legacy_printers/printer_mods/Jasperkm/Fire_alarm_mount/.metadata.yml index 2762e966a..267bcf256 100644 --- a/legacy_printers/printer_mods/Jasperkm/Fire_alarm_mount/.metadata.yml +++ b/legacy_printers/printer_mods/Jasperkm/Fire_alarm_mount/.metadata.yml @@ -6,4 +6,6 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- fire_mount_v1.STL title: Fire alarm mount diff --git a/legacy_printers/printer_mods/Jasperkm/LED_strip_holder/.metadata.yml b/legacy_printers/printer_mods/Jasperkm/LED_strip_holder/.metadata.yml index 2dd1dfc41..41b4a6626 100644 --- a/legacy_printers/printer_mods/Jasperkm/LED_strip_holder/.metadata.yml +++ b/legacy_printers/printer_mods/Jasperkm/LED_strip_holder/.metadata.yml @@ -6,4 +6,6 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- 250_led_holder_v5.STL title: LED strip holder diff --git a/legacy_printers/printer_mods/Jasperkm/Panel_key_wrench/.metadata.yml b/legacy_printers/printer_mods/Jasperkm/Panel_key_wrench/.metadata.yml index ed0e7e10b..f1214502e 100644 --- a/legacy_printers/printer_mods/Jasperkm/Panel_key_wrench/.metadata.yml +++ b/legacy_printers/printer_mods/Jasperkm/Panel_key_wrench/.metadata.yml @@ -5,4 +5,6 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- keywrench.STL title: Panel key wrench diff --git a/legacy_printers/printer_mods/Jasperkm/Simple_tool_holder/.metadata.yml b/legacy_printers/printer_mods/Jasperkm/Simple_tool_holder/.metadata.yml index 161e4a7f1..b7fb70d29 100644 --- a/legacy_printers/printer_mods/Jasperkm/Simple_tool_holder/.metadata.yml +++ b/legacy_printers/printer_mods/Jasperkm/Simple_tool_holder/.metadata.yml @@ -6,4 +6,6 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- Toolholder_v1.STL title: Simple tool holder diff --git a/legacy_printers/printer_mods/Jasperkm/Skirt_mods/.metadata.yml b/legacy_printers/printer_mods/Jasperkm/Skirt_mods/.metadata.yml index fa27a1ac4..3924ee8a0 100644 --- a/legacy_printers/printer_mods/Jasperkm/Skirt_mods/.metadata.yml +++ b/legacy_printers/printer_mods/Jasperkm/Skirt_mods/.metadata.yml @@ -5,4 +5,10 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- front_blank_skirt_panel_clock.STL +- side_skirt_a_fanguard_250.STL +- side_skirt_a_fanmount_250.STL +- side_skirt_b_fanguard_250.STL +- side_skirt_b_fanmount_250.STL title: Skirt mods diff --git a/legacy_printers/printer_mods/Jass_on/Rear_panel_clips/.metadata.yml b/legacy_printers/printer_mods/Jass_on/Rear_panel_clips/.metadata.yml index 43ed47853..2c155b399 100644 --- a/legacy_printers/printer_mods/Jass_on/Rear_panel_clips/.metadata.yml +++ b/legacy_printers/printer_mods/Jass_on/Rear_panel_clips/.metadata.yml @@ -3,5 +3,7 @@ description: Rear Panel Clips images: [] mod_version: 1 printer_compatibility: - - V2.1 +- V2.1 +stl: +- Rear_Panel_Clips_v2.stl title: Rear Panel Clips diff --git a/legacy_printers/printer_mods/Jass_on/SKR_1.3_Cooling_Bracket_v2/.metadata.yml b/legacy_printers/printer_mods/Jass_on/SKR_1.3_Cooling_Bracket_v2/.metadata.yml index 77ac64c16..962b3b1ea 100644 --- a/legacy_printers/printer_mods/Jass_on/SKR_1.3_Cooling_Bracket_v2/.metadata.yml +++ b/legacy_printers/printer_mods/Jass_on/SKR_1.3_Cooling_Bracket_v2/.metadata.yml @@ -6,4 +6,6 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- SKR_1.3_Cooling_Bracket_v2.stl title: SKR 1.3 Cooling bracket diff --git a/legacy_printers/printer_mods/Jass_on/Voron_2.1.1_Tempered_Glass/.metadata.yml b/legacy_printers/printer_mods/Jass_on/Voron_2.1.1_Tempered_Glass/.metadata.yml index 1904e2fa3..1071d9181 100644 --- a/legacy_printers/printer_mods/Jass_on/Voron_2.1.1_Tempered_Glass/.metadata.yml +++ b/legacy_printers/printer_mods/Jass_on/Voron_2.1.1_Tempered_Glass/.metadata.yml @@ -4,4 +4,11 @@ images: [] mod_version: 1 printer_compatibility: - V2.1 +stl: +- corner_panel_clip_3mm_x12.stl +- corner_panel_clip_6mm_x12.gcode.stl +- front_panel_rest_3mm_x2.stl +- front_panel_rest_6mm_x2.stl +- handle_3mm_x2.stl +- handle_6mm_x2.stl title: Tempered glass clips/handle diff --git a/legacy_printers/printer_mods/JeJeff/VORON2.1/2020_5mm_Slot_Cover/.metadata.yml b/legacy_printers/printer_mods/JeJeff/VORON2.1/2020_5mm_Slot_Cover/.metadata.yml index 29abf80ca..01eba8f4b 100644 --- a/legacy_printers/printer_mods/JeJeff/VORON2.1/2020_5mm_Slot_Cover/.metadata.yml +++ b/legacy_printers/printer_mods/JeJeff/VORON2.1/2020_5mm_Slot_Cover/.metadata.yml @@ -8,4 +8,8 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- 2020_5mm_slot_cover-10mm.stl +- 2020_5mm_slot_cover-20mm.stl +- 2020_5mm_slot_cover-5mm.stl title: 2020 Extrusion slot cover diff --git a/legacy_printers/printer_mods/JeJeff/VORON2.1/Cable_Tie_Mount/.metadata.yml b/legacy_printers/printer_mods/JeJeff/VORON2.1/Cable_Tie_Mount/.metadata.yml index c3fd4c8e4..85c66afba 100644 --- a/legacy_printers/printer_mods/JeJeff/VORON2.1/Cable_Tie_Mount/.metadata.yml +++ b/legacy_printers/printer_mods/JeJeff/VORON2.1/Cable_Tie_Mount/.metadata.yml @@ -9,4 +9,7 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- m3_small_cable_tie_mount.stl +- m4_small_cable_tie_mount.stl title: Cable Tie Mount diff --git a/legacy_printers/printer_mods/JeJeff/VORON2.1/Mains_Plug_Panel_with_RJ45_Panel_Mount/.metadata.yml b/legacy_printers/printer_mods/JeJeff/VORON2.1/Mains_Plug_Panel_with_RJ45_Panel_Mount/.metadata.yml index 73a880f5a..c1f0123ac 100644 --- a/legacy_printers/printer_mods/JeJeff/VORON2.1/Mains_Plug_Panel_with_RJ45_Panel_Mount/.metadata.yml +++ b/legacy_printers/printer_mods/JeJeff/VORON2.1/Mains_Plug_Panel_with_RJ45_Panel_Mount/.metadata.yml @@ -9,4 +9,7 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- mains_plug_panel_with_rj45_panel_mount.stl +- mains_plug_panel_with_rj45_panel_mount_alternative.stl title: Main Plug Panel diff --git a/legacy_printers/printer_mods/Jink/VORON_2.1/Coroplast_Mount/.metadata.yml b/legacy_printers/printer_mods/Jink/VORON_2.1/Coroplast_Mount/.metadata.yml index 18938fd4c..852c702eb 100644 --- a/legacy_printers/printer_mods/Jink/VORON_2.1/Coroplast_Mount/.metadata.yml +++ b/legacy_printers/printer_mods/Jink/VORON_2.1/Coroplast_Mount/.metadata.yml @@ -6,4 +6,6 @@ images: [] mod_version: 1 printer_compatibility: - V2.1 +stl: +- Coroplast_Mount.STL title: Coroplast mount diff --git a/legacy_printers/printer_mods/Jink/VORON_2.1/Filament_Runout_Sensor_Mount/.metadata.yml b/legacy_printers/printer_mods/Jink/VORON_2.1/Filament_Runout_Sensor_Mount/.metadata.yml index 2cd20f306..3ec4c2411 100644 --- a/legacy_printers/printer_mods/Jink/VORON_2.1/Filament_Runout_Sensor_Mount/.metadata.yml +++ b/legacy_printers/printer_mods/Jink/VORON_2.1/Filament_Runout_Sensor_Mount/.metadata.yml @@ -6,4 +6,6 @@ images: [] mod_version: 1 printer_compatibility: - V2.1 +stl: +- Filament_Runout_Sensor_Mount.STL title: Filament runout sensor mount diff --git a/legacy_printers/printer_mods/Jink/VORON_2.1/Left_Handed_Ramps_Mount/.metadata.yml b/legacy_printers/printer_mods/Jink/VORON_2.1/Left_Handed_Ramps_Mount/.metadata.yml index 4e748e883..d219ea296 100644 --- a/legacy_printers/printer_mods/Jink/VORON_2.1/Left_Handed_Ramps_Mount/.metadata.yml +++ b/legacy_printers/printer_mods/Jink/VORON_2.1/Left_Handed_Ramps_Mount/.metadata.yml @@ -10,4 +10,7 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- 2mm_Lower_Prototype.STL +- Left_Handed_RAMPS_Mount.STL title: Left handed RAMPS mount diff --git a/legacy_printers/printer_mods/Jink/VORON_2.1/Spool_Holder_With_Scale/.metadata.yml b/legacy_printers/printer_mods/Jink/VORON_2.1/Spool_Holder_With_Scale/.metadata.yml index 1b1e89983..2afbccf86 100644 --- a/legacy_printers/printer_mods/Jink/VORON_2.1/Spool_Holder_With_Scale/.metadata.yml +++ b/legacy_printers/printer_mods/Jink/VORON_2.1/Spool_Holder_With_Scale/.metadata.yml @@ -13,4 +13,8 @@ images: [] mod_version: 1 printer_compatibility: - V2.1 +stl: +- Mount.STL +- Spool_Holder_1mm_Clearance.STL +- Spool_Holder_2mm_Clearance.STL title: Spool holder with scale diff --git a/legacy_printers/printer_mods/Jink/VORON_2.1/WAGO_Mount/.metadata.yml b/legacy_printers/printer_mods/Jink/VORON_2.1/WAGO_Mount/.metadata.yml index 6e72c230d..bb6a0e8a3 100644 --- a/legacy_printers/printer_mods/Jink/VORON_2.1/WAGO_Mount/.metadata.yml +++ b/legacy_printers/printer_mods/Jink/VORON_2.1/WAGO_Mount/.metadata.yml @@ -10,4 +10,7 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- Test_Fit.STL +- VORON_WAGO_Mount.STL title: WAGO Mount diff --git a/legacy_printers/printer_mods/JustinVoelker/Mains_Plug_Panel_with_RJ45/.metadata.yml b/legacy_printers/printer_mods/JustinVoelker/Mains_Plug_Panel_with_RJ45/.metadata.yml index b9694d123..b7fcd0a2a 100644 --- a/legacy_printers/printer_mods/JustinVoelker/Mains_Plug_Panel_with_RJ45/.metadata.yml +++ b/legacy_printers/printer_mods/JustinVoelker/Mains_Plug_Panel_with_RJ45/.metadata.yml @@ -7,4 +7,6 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- mains_plug_panel_with_rj45.stl title: Mains Plug Panel with RJ45 diff --git a/legacy_printers/printer_mods/K1JWG/PanelDue7iLogo/.metadata.yml b/legacy_printers/printer_mods/K1JWG/PanelDue7iLogo/.metadata.yml index 09e88ddc3..c2b0fdfa2 100644 --- a/legacy_printers/printer_mods/K1JWG/PanelDue7iLogo/.metadata.yml +++ b/legacy_printers/printer_mods/K1JWG/PanelDue7iLogo/.metadata.yml @@ -1,10 +1,11 @@ cad: [] description: Custom Voron 2 logo for use as a PanelDue 7i startup splash screen images: - - voron2-logo-paneldue7i.bmp +- voron2-logo-paneldue7i.bmp mod_version: 1 printer_compatibility: - - V1.6 - - V2.1 - - V2.2 +- V1.6 +- V2.1 +- V2.2 +stl: [] title: PanelDue 7i Custom Logo diff --git a/legacy_printers/printer_mods/Nashuar/7.0-WaveShare_Screen/.metadata.yml b/legacy_printers/printer_mods/Nashuar/7.0-WaveShare_Screen/.metadata.yml index 45a7ef121..9ee76b4bd 100644 --- a/legacy_printers/printer_mods/Nashuar/7.0-WaveShare_Screen/.metadata.yml +++ b/legacy_printers/printer_mods/Nashuar/7.0-WaveShare_Screen/.metadata.yml @@ -4,4 +4,14 @@ images: [] mod_version: 1 printer_compatibility: - V2.2 +stl: +- ScreenBack_C.stl +- ScreenBack_H.stl +- ScreenFront_C.stl +- ScreenFront_H.stl +- ScreenMid_H.stl +- swing_arm_long_2x.stl +- swing_arm_short_a.stl +- swing_arm_short_b.stl +- _Button_5x_H.stl title: WaveShare 7" Screen Mount diff --git a/legacy_printers/printer_mods/Nashuar/LEDBERG_LED_Mount/.metadata.yml b/legacy_printers/printer_mods/Nashuar/LEDBERG_LED_Mount/.metadata.yml index 6a5497dcf..82462e420 100644 --- a/legacy_printers/printer_mods/Nashuar/LEDBERG_LED_Mount/.metadata.yml +++ b/legacy_printers/printer_mods/Nashuar/LEDBERG_LED_Mount/.metadata.yml @@ -5,4 +5,6 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- LEDBERG_Mount.stl title: IKEA LEDBERG Spot Mount diff --git a/legacy_printers/printer_mods/OrkusMG/DragonToolhead/.metadata.yml b/legacy_printers/printer_mods/OrkusMG/DragonToolhead/.metadata.yml index 1ec7339b0..020fdd7df 100644 --- a/legacy_printers/printer_mods/OrkusMG/DragonToolhead/.metadata.yml +++ b/legacy_printers/printer_mods/OrkusMG/DragonToolhead/.metadata.yml @@ -1,11 +1,13 @@ cad: - - DragonHotendToolheadMountv14.f3d +- DragonHotendToolheadMountv14.f3d description: Dragon Toolhead images: - - Top.jpg - - Back.jpg - - Bottom.jpg - - Front.jpg +- Top.jpg +- Back.jpg +- Bottom.jpg +- Front.jpg mod_version: 1 printer_compatibility: [] +stl: +- DragonToolheadFinal.stl title: Dragon Toolhead diff --git a/legacy_printers/printer_mods/OrkusMG/VoronFrontSwivelLED/.metadata.yml b/legacy_printers/printer_mods/OrkusMG/VoronFrontSwivelLED/.metadata.yml index a7a007b37..a7ac1533a 100644 --- a/legacy_printers/printer_mods/OrkusMG/VoronFrontSwivelLED/.metadata.yml +++ b/legacy_printers/printer_mods/OrkusMG/VoronFrontSwivelLED/.metadata.yml @@ -1,11 +1,15 @@ cad: - - CoverFor5inchLCD.f3d +- CoverFor5inchLCD.f3d description: Voron Swivle Front LED Bar images: - - 1.jpg - - 2.jpg - - 3.jpg - - 4.jpg +- 1.jpg +- 2.jpg +- 3.jpg +- 4.jpg mod_version: 1 printer_compatibility: [] +stl: +- LEDBarAamL.stl +- LEDBarArmR.stl +- LEDFrameMountx2.stl title: Voron Swivle Front LED Bar diff --git a/legacy_printers/printer_mods/OrkusMG/Waveshare5inchHDMILCDscreenCover/.metadata.yml b/legacy_printers/printer_mods/OrkusMG/Waveshare5inchHDMILCDscreenCover/.metadata.yml index a01593c9c..1a13ce6ed 100644 --- a/legacy_printers/printer_mods/OrkusMG/Waveshare5inchHDMILCDscreenCover/.metadata.yml +++ b/legacy_printers/printer_mods/OrkusMG/Waveshare5inchHDMILCDscreenCover/.metadata.yml @@ -10,4 +10,7 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- BackLCDcover.stl +- FrontLCDCover.stl title: Waveshare 5 Inch LCD Cover diff --git a/legacy_printers/printer_mods/PhilLeMint/Dual_LED_Light_Mount/.metadata.yml b/legacy_printers/printer_mods/PhilLeMint/Dual_LED_Light_Mount/.metadata.yml index c269af9a3..f56fecd5b 100644 --- a/legacy_printers/printer_mods/PhilLeMint/Dual_LED_Light_Mount/.metadata.yml +++ b/legacy_printers/printer_mods/PhilLeMint/Dual_LED_Light_Mount/.metadata.yml @@ -9,4 +9,8 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- LED_DUAL_MOUNT.STL +- LED_END_CAP.STL +- LED_END_CAP_WIRE_EXIT.STL title: Dual LED Light Mount diff --git a/legacy_printers/printer_mods/PhilLeMint/Indicator_Mount/.metadata.yml b/legacy_printers/printer_mods/PhilLeMint/Indicator_Mount/.metadata.yml index c9c7397de..93555e951 100644 --- a/legacy_printers/printer_mods/PhilLeMint/Indicator_Mount/.metadata.yml +++ b/legacy_printers/printer_mods/PhilLeMint/Indicator_Mount/.metadata.yml @@ -7,4 +7,6 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- Indicator_Mount_REV1.STL title: Indicator Mount diff --git a/legacy_printers/printer_mods/PhilLeMint/Panel_Mounting/.metadata.yml b/legacy_printers/printer_mods/PhilLeMint/Panel_Mounting/.metadata.yml index 94cda2d9d..0ce8b4974 100644 --- a/legacy_printers/printer_mods/PhilLeMint/Panel_Mounting/.metadata.yml +++ b/legacy_printers/printer_mods/PhilLeMint/Panel_Mounting/.metadata.yml @@ -7,4 +7,7 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- corner-panel_clip_3_32_foam.STL +- mid-panel_clip_3_32_foam.STL title: Panel Mounting diff --git a/legacy_printers/printer_mods/PhilLeMint/Velocity_Stack/.metadata.yml b/legacy_printers/printer_mods/PhilLeMint/Velocity_Stack/.metadata.yml index 5de2d73be..05a3754c5 100644 --- a/legacy_printers/printer_mods/PhilLeMint/Velocity_Stack/.metadata.yml +++ b/legacy_printers/printer_mods/PhilLeMint/Velocity_Stack/.metadata.yml @@ -5,4 +5,6 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- Velocity_Stack.STL title: Velocity Stack diff --git a/legacy_printers/printer_mods/PhilLeMint/c920_Mount/.metadata.yml b/legacy_printers/printer_mods/PhilLeMint/c920_Mount/.metadata.yml index faccbd06e..4feeb8e2a 100644 --- a/legacy_printers/printer_mods/PhilLeMint/c920_Mount/.metadata.yml +++ b/legacy_printers/printer_mods/PhilLeMint/c920_Mount/.metadata.yml @@ -1,11 +1,13 @@ cad: [] description: c920 Camera Mount images: - - Finished c920 Mount.jpg - - c920 mount1.jpg - - c920 mount2.jpg +- Finished c920 Mount.jpg +- c920 mount1.jpg +- c920 mount2.jpg mod_version: 1 printer_compatibility: - - V2.1 - - V2.2 +- V2.1 +- V2.2 +stl: +- c920_Mount_REV3.STL title: c920 Mount diff --git a/legacy_printers/printer_mods/Railgunner/10mmBMGx2/.metadata.yml b/legacy_printers/printer_mods/Railgunner/10mmBMGx2/.metadata.yml index ddb9e7a3d..e63101905 100644 --- a/legacy_printers/printer_mods/Railgunner/10mmBMGx2/.metadata.yml +++ b/legacy_printers/printer_mods/Railgunner/10mmBMGx2/.metadata.yml @@ -4,4 +4,16 @@ images: - Dual_BMG_Extruder.png mod_version: 1 printer_compatibility: [] +stl: +- STL/40mm_spiral_shroud_opp.stl +- STL/Belt_Clip_10mm.stl +- STL/CloseBlowerDuctVx2.stl +- STL/x40mm_fan_duct_for_E3D_ChimeraVx6.stl +- STL/xBondtechBases.stl +- STL/xBondtechBasesA.stl +- STL/xCableMountA.stl +- STL/xCableMountB.stl +- STL/xCarriage.stl +- STL/xChimeraMount.stl +- STL/xFanMountLowerVx2.stl title: Dual Direct Drive X Carriage diff --git a/legacy_printers/printer_mods/Seamen/RAMPS-Extender_holder/.metadata.yml b/legacy_printers/printer_mods/Seamen/RAMPS-Extender_holder/.metadata.yml index 9bc083ad1..5daf5ca0c 100644 --- a/legacy_printers/printer_mods/Seamen/RAMPS-Extender_holder/.metadata.yml +++ b/legacy_printers/printer_mods/Seamen/RAMPS-Extender_holder/.metadata.yml @@ -6,4 +6,6 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- RAMPS-Extender_Halter_2_v4.stl title: RAMPS Extender Holder diff --git a/legacy_printers/printer_mods/Slidr/PanzerChain/.metadata.yml b/legacy_printers/printer_mods/Slidr/PanzerChain/.metadata.yml index e8ae0a2df..dc5ab3249 100644 --- a/legacy_printers/printer_mods/Slidr/PanzerChain/.metadata.yml +++ b/legacy_printers/printer_mods/Slidr/PanzerChain/.metadata.yml @@ -1,24 +1,51 @@ cad: [] description: Alternative energie chain images: - - themes/Example_1.jpg - - 01_Link-Assembly.PNG - - 02_XY-Parts.PNG - - 03_XY-Part-Tolerance_Explanation.PNG - - 04_Z-Assembly.PNG - - gallery_printer_examples/aerosov_V2.2_petg_clear.jpg - - gallery_printer_examples/Calozor_V2.x-petg_1.jpeg - - gallery_printer_examples/Calozor_V2.x-petg_2.jpg - - gallery_printer_examples/eraser_V2.2_fx_redline-abs-red.jpg - - gallery_printer_examples/slidr_V2.2_AfterBurnerBeta_esunABS+_black_crappyphone_pic.jpg - - themes/Example_2.jpg - - themes/Example_3.jpg - - themes/Example_4.jpg - - themes/Example_5.jpg - - themes/Example_6.jpg - - themes/Example_7.jpg - - themes/Example_8.jpg +- themes/Example_1.jpg +- 01_Link-Assembly.PNG +- 02_XY-Parts.PNG +- 03_XY-Part-Tolerance_Explanation.PNG +- 04_Z-Assembly.PNG +- gallery_printer_examples/aerosov_V2.2_petg_clear.jpg +- gallery_printer_examples/Calozor_V2.x-petg_1.jpeg +- gallery_printer_examples/Calozor_V2.x-petg_2.jpg +- gallery_printer_examples/eraser_V2.2_fx_redline-abs-red.jpg +- gallery_printer_examples/slidr_V2.2_AfterBurnerBeta_esunABS+_black_crappyphone_pic.jpg +- themes/Example_2.jpg +- themes/Example_3.jpg +- themes/Example_4.jpg +- themes/Example_5.jpg +- themes/Example_6.jpg +- themes/Example_7.jpg +- themes/Example_8.jpg mod_version: 1 printer_compatibility: - - V2.2 +- V2.2 +stl: +- XY/XY-Link_loose_xA.stl +- XY/XY-Link_normal_xA.stl +- XY/XY_extrusion_anchor_x2.stl +- XY/XY_Link_tight_xA.stl +- XY/XY_Link_verytight_xA.stl +- XY/Voron2.2/XY_anchor_OPTION1_half-free_left_x2.stl +- XY/Voron2.2/XY_anchor_OPTION1_half-free_right_x2.stl +- XY/Voron2.2/XY_anchor_OPTION2_fixed_left_x2.stl +- XY/Voron2.2/XY_anchor_OPTION2_fixed_right_x2.stl +- XY/Voron2.2_Afterburner_Beta/XY_anchor_AfterBurnerBeta_Bridge_x1_BETA.stl +- XY/Voron2.2_Afterburner_Beta/XY_anchor_AfterBurnerBeta_x1_BETA.stl +- XYZ/XYZ-Clip_Option1_defaultxA.stl +- XYZ/XYZ-Clip_Option2_EasyOpen_xA.stl +- Z/Z_Link_xB.stl +- Z/2.2/Z_anchor_frame_OPTION1_x1.stl +- Z/2.2/Z_anchor_gantry_chains_only_x1.stl +- Z/2.2/Z_anchor_gantry_OPTION2_solid_vertical_x1/150.stl +- Z/2.2/Z_anchor_gantry_OPTION2_solid_vertical_x1/200.stl +- Z/2.2/Z_anchor_gantry_OPTION2_solid_vertical_x1/250.stl +- Z/2.2/Z_anchor_gantry_OPTION2_solid_vertical_x1/300.stl +- Z/2.2/Z_anchor_gantry_OPTION2_solid_vertical_x1/350.stl +- Z/2.2/Z_anchor_gantry_OPTION2_solid_vertical_x1/400.stl +- Z/2.2/Z_anchor_gantry_OPTION2_solid_vertical_x1/Z_anchor_gantry_OPTION2_solid_vertical_INSERTx1.stl +- Z/2.2/Z_anchor_gantry_OPTION2_solid_vertical_x1/Z_Solid_vertical_400_P1.stl +- Z/2.2/Z_anchor_gantry_OPTION2_solid_vertical_x1/Z_Solid_vertical_400_P2.stl +- Z/2.2/Z_anchor_gantry_OPTION2_solid_vertical_x1/Z_Solid_vertical_400_P3.stl title: Panzer Chain diff --git a/legacy_printers/printer_mods/Sparreau/5v_psupply_mount/.metadata.yml b/legacy_printers/printer_mods/Sparreau/5v_psupply_mount/.metadata.yml index 471cc923e..c5a0198b3 100644 --- a/legacy_printers/printer_mods/Sparreau/5v_psupply_mount/.metadata.yml +++ b/legacy_printers/printer_mods/Sparreau/5v_psupply_mount/.metadata.yml @@ -1,10 +1,12 @@ cad: - - 5v_psupply_mount.f3d +- 5v_psupply_mount.f3d description: 5V Power Supply Mount images: [] mod_version: 1 printer_compatibility: - - V1.6 - - V2.1 - - V2.2 +- V1.6 +- V2.1 +- V2.2 +stl: +- 5v_psupply_mount.stl title: 5V Power Supply Mount diff --git a/legacy_printers/printer_mods/Sparreau/FSR_circuit_mount/.metadata.yml b/legacy_printers/printer_mods/Sparreau/FSR_circuit_mount/.metadata.yml index 7f98e5c0d..9848dcdfe 100644 --- a/legacy_printers/printer_mods/Sparreau/FSR_circuit_mount/.metadata.yml +++ b/legacy_printers/printer_mods/Sparreau/FSR_circuit_mount/.metadata.yml @@ -1,8 +1,10 @@ cad: - - FSR_circuit_mount.f3d +- FSR_circuit_mount.f3d description: Bracket for mounting the FSR PCB images: [] mod_version: 1 printer_compatibility: - - V2.1 +- V2.1 +stl: +- FSR_circuit_mount.stl title: FSR Circuit Mount diff --git a/legacy_printers/printer_mods/Sparreau/bed_extrusion_spacer/.metadata.yml b/legacy_printers/printer_mods/Sparreau/bed_extrusion_spacer/.metadata.yml index 9d05a5ddb..31d71ddae 100644 --- a/legacy_printers/printer_mods/Sparreau/bed_extrusion_spacer/.metadata.yml +++ b/legacy_printers/printer_mods/Sparreau/bed_extrusion_spacer/.metadata.yml @@ -1,9 +1,10 @@ cad: - - bed_extrusion_spacer_parametric.f3d +- bed_extrusion_spacer_parametric.f3d description: Bed Extrusion Spacer images: [] mod_version: 1 printer_compatibility: - - V2.1 - - V2.2 +- V2.1 +- V2.2 +stl: [] title: Bed Extrusion Spacer diff --git a/legacy_printers/printer_mods/Sparreau/dial_indicator_fan_mount/.metadata.yml b/legacy_printers/printer_mods/Sparreau/dial_indicator_fan_mount/.metadata.yml index 7b8c7ccc5..2b84e40bc 100644 --- a/legacy_printers/printer_mods/Sparreau/dial_indicator_fan_mount/.metadata.yml +++ b/legacy_printers/printer_mods/Sparreau/dial_indicator_fan_mount/.metadata.yml @@ -1,7 +1,9 @@ cad: - - dial_indicator_fan_mount.f3d +- dial_indicator_fan_mount.f3d description: Dial Indicator Fan Mount images: [] mod_version: 1 printer_compatibility: [] +stl: +- dial_indicator_fan_mount.stl title: Dial Indicator Fan Mount diff --git a/legacy_printers/printer_mods/Sparreau/mains_plug_panel/.metadata.yml b/legacy_printers/printer_mods/Sparreau/mains_plug_panel/.metadata.yml index 8c8a6227e..fe7a1b0db 100644 --- a/legacy_printers/printer_mods/Sparreau/mains_plug_panel/.metadata.yml +++ b/legacy_printers/printer_mods/Sparreau/mains_plug_panel/.metadata.yml @@ -1,10 +1,11 @@ cad: - - mains_plug_panel-parametric.f3d +- mains_plug_panel-parametric.f3d description: Scalable mains plug panel with small modifications images: [] mod_version: 1 printer_compatibility: - - V1.6 - - V2.1 - - V2.2 +- V1.6 +- V2.1 +- V2.2 +stl: [] title: Mains Plug Panel Parametric diff --git a/legacy_printers/printer_mods/Sparreau/z_idler_frame_extra_tab/.metadata.yml b/legacy_printers/printer_mods/Sparreau/z_idler_frame_extra_tab/.metadata.yml index 1a2da490c..6b6161d46 100644 --- a/legacy_printers/printer_mods/Sparreau/z_idler_frame_extra_tab/.metadata.yml +++ b/legacy_printers/printer_mods/Sparreau/z_idler_frame_extra_tab/.metadata.yml @@ -3,5 +3,8 @@ description: An extra tab added to the Z idler to prevent sagging / rotation images: [] mod_version: 1 printer_compatibility: - - V2.1 +- V2.1 +stl: +- z_idler_frame_a_EXTRA-TAB_x2.stl +- z_idler_frame_b_EXTRA-TAB_x2.stl title: Z Idler Frame Extra Tab diff --git a/legacy_printers/printer_mods/Sparreau/z_rail_stop/.metadata.yml b/legacy_printers/printer_mods/Sparreau/z_rail_stop/.metadata.yml index 2da57c71f..d83b196dc 100644 --- a/legacy_printers/printer_mods/Sparreau/z_rail_stop/.metadata.yml +++ b/legacy_printers/printer_mods/Sparreau/z_rail_stop/.metadata.yml @@ -1,9 +1,12 @@ cad: - - z_rail_stop_PARAMETRIC_x4.f3d +- z_rail_stop_PARAMETRIC_x4.f3d description: Z Rail Stop images: [] mod_version: 1 printer_compatibility: - - V2.1 - - V2.2 +- V2.1 +- V2.2 +stl: +- z_rail_stop_bottom_x4.stl +- z_rail_stop_top_x4.stl title: Z Rail Stop diff --git a/legacy_printers/printer_mods/Stephan/M12_probeholder/.metadata.yml b/legacy_printers/printer_mods/Stephan/M12_probeholder/.metadata.yml index 4a9278e8f..3d929e08e 100644 --- a/legacy_printers/printer_mods/Stephan/M12_probeholder/.metadata.yml +++ b/legacy_printers/printer_mods/Stephan/M12_probeholder/.metadata.yml @@ -6,4 +6,6 @@ images: mod_version: 1 printer_compatibility: - V2.1 +stl: +- M12_probe_mount.stl title: M12 Probeholder diff --git a/legacy_printers/printer_mods/Stephan/bltouch_mount/.metadata.yml b/legacy_printers/printer_mods/Stephan/bltouch_mount/.metadata.yml index 7262570c1..1ac238789 100644 --- a/legacy_printers/printer_mods/Stephan/bltouch_mount/.metadata.yml +++ b/legacy_printers/printer_mods/Stephan/bltouch_mount/.metadata.yml @@ -1,10 +1,12 @@ cad: - - bltouch_v8.step +- bltouch_v8.step description: Drop in replacement of the stock probe to a BLTouch images: - - pic_2.jpg - - pic_1.jpg +- pic_2.jpg +- pic_1.jpg mod_version: 1 printer_compatibility: - - V2.1 +- V2.1 +stl: +- bltouch_v8.stl title: BlTouch Mount diff --git a/legacy_printers/printer_mods/Trippinonaduck/LRS_75_5/.metadata.yml b/legacy_printers/printer_mods/Trippinonaduck/LRS_75_5/.metadata.yml index b601bd2a9..02444fb8a 100644 --- a/legacy_printers/printer_mods/Trippinonaduck/LRS_75_5/.metadata.yml +++ b/legacy_printers/printer_mods/Trippinonaduck/LRS_75_5/.metadata.yml @@ -6,4 +6,6 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- LRS-75-5.stl title: LRS-75-5 diff --git a/legacy_printers/printer_mods/Trippinonaduck/SwitchHolder/.metadata.yml b/legacy_printers/printer_mods/Trippinonaduck/SwitchHolder/.metadata.yml index 0f1a7efda..e97dae7c7 100644 --- a/legacy_printers/printer_mods/Trippinonaduck/SwitchHolder/.metadata.yml +++ b/legacy_printers/printer_mods/Trippinonaduck/SwitchHolder/.metadata.yml @@ -7,4 +7,7 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- 19mm_Switch_Holder_BACK.stl +- 19mm_Switch_Holder_FRONT.stl title: Switch Holder diff --git a/legacy_printers/printer_mods/XIle/Afterburner_Umbilical/.metadata.yml b/legacy_printers/printer_mods/XIle/Afterburner_Umbilical/.metadata.yml index dbd5f80e9..0725754a5 100644 --- a/legacy_printers/printer_mods/XIle/Afterburner_Umbilical/.metadata.yml +++ b/legacy_printers/printer_mods/XIle/Afterburner_Umbilical/.metadata.yml @@ -3,5 +3,7 @@ description: Supports a umbilical setup, on AB, taking the strain off connectors images: [] mod_version: 1 printer_compatibility: - - V2.2 +- V2.2 +stl: +- Afterburner_Umbilical.STL title: AfterBurner Umbilical diff --git a/legacy_printers/printer_mods/agsolino/RS25-5-Rotated/.metadata.yml b/legacy_printers/printer_mods/agsolino/RS25-5-Rotated/.metadata.yml index 7f2e33bec..f67b0a753 100644 --- a/legacy_printers/printer_mods/agsolino/RS25-5-Rotated/.metadata.yml +++ b/legacy_printers/printer_mods/agsolino/RS25-5-Rotated/.metadata.yml @@ -6,4 +6,6 @@ images: mod_version: 1 printer_compatibility: - V2.2 +stl: +- rs-25-5-90.stl title: RS-25-5 Rotated diff --git a/legacy_printers/printer_mods/agsolino/RunOutFilamentHolder/.metadata.yml b/legacy_printers/printer_mods/agsolino/RunOutFilamentHolder/.metadata.yml index 6c350a4c3..26426be92 100644 --- a/legacy_printers/printer_mods/agsolino/RunOutFilamentHolder/.metadata.yml +++ b/legacy_printers/printer_mods/agsolino/RunOutFilamentHolder/.metadata.yml @@ -6,4 +6,7 @@ images: mod_version: 1 printer_compatibility: - V2.2 +stl: +- Holder.stl +- Key.stl title: RunOut Filament Holder diff --git a/legacy_printers/printer_mods/andreq/Mobius_Shaft_Jig/.metadata.yml b/legacy_printers/printer_mods/andreq/Mobius_Shaft_Jig/.metadata.yml index c4e94ac44..5bab866a6 100644 --- a/legacy_printers/printer_mods/andreq/Mobius_Shaft_Jig/.metadata.yml +++ b/legacy_printers/printer_mods/andreq/Mobius_Shaft_Jig/.metadata.yml @@ -6,4 +6,6 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- mobius_shaft_jig.stl title: Mobius Shaft Jig diff --git a/legacy_printers/printer_mods/blamm/hepa_filter/.metadata.yml b/legacy_printers/printer_mods/blamm/hepa_filter/.metadata.yml index 17261d048..47f8f8276 100644 --- a/legacy_printers/printer_mods/blamm/hepa_filter/.metadata.yml +++ b/legacy_printers/printer_mods/blamm/hepa_filter/.metadata.yml @@ -9,4 +9,7 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- HEPA_filter_door.stl +- HEPA_filter_housing.stl title: HEPA Filter Housing diff --git a/legacy_printers/printer_mods/blamm/jigs/.metadata.yml b/legacy_printers/printer_mods/blamm/jigs/.metadata.yml index 14019cea0..e80fbff60 100644 --- a/legacy_printers/printer_mods/blamm/jigs/.metadata.yml +++ b/legacy_printers/printer_mods/blamm/jigs/.metadata.yml @@ -7,4 +7,8 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- blind_hole_jig_5mm_m5.stl +- blind_hole_jig_6mm_m5.stl +- blind_hole_jig_6mm_m6.stl title: Blind Joint Drilling Jigs diff --git a/legacy_printers/printer_mods/blamm/relay_bracket/.metadata.yml b/legacy_printers/printer_mods/blamm/relay_bracket/.metadata.yml index f0c6b6883..fcd3a821f 100644 --- a/legacy_printers/printer_mods/blamm/relay_bracket/.metadata.yml +++ b/legacy_printers/printer_mods/blamm/relay_bracket/.metadata.yml @@ -7,4 +7,6 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- 4relay_mount.stl title: Relay module bracket diff --git a/legacy_printers/printer_mods/bryansj/Befenybay_Chain_Anchors/.metadata.yml b/legacy_printers/printer_mods/bryansj/Befenybay_Chain_Anchors/.metadata.yml index ea98b00b5..dcb485c56 100644 --- a/legacy_printers/printer_mods/bryansj/Befenybay_Chain_Anchors/.metadata.yml +++ b/legacy_printers/printer_mods/bryansj/Befenybay_Chain_Anchors/.metadata.yml @@ -10,4 +10,7 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- 10x11_Befenybay_Chain_Top_Anchor.stl +- Triangle_Hole_Pattern_End_Mount_to_2020.stl title: Befenybay Chain Anchors diff --git a/legacy_printers/printer_mods/bryansj/Keystone_Jack_Universal_Skirt_Insert/.metadata.yml b/legacy_printers/printer_mods/bryansj/Keystone_Jack_Universal_Skirt_Insert/.metadata.yml index 8614a766b..1363ade10 100644 --- a/legacy_printers/printer_mods/bryansj/Keystone_Jack_Universal_Skirt_Insert/.metadata.yml +++ b/legacy_printers/printer_mods/bryansj/Keystone_Jack_Universal_Skirt_Insert/.metadata.yml @@ -9,4 +9,6 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- Keystone_Jack_Universal_Skirt_Insert.stl title: Keystone Jack Universal Skirt Insert diff --git a/legacy_printers/printer_mods/bryansj/RPi_Frame_with_Heatsink_90deg/.metadata.yml b/legacy_printers/printer_mods/bryansj/RPi_Frame_with_Heatsink_90deg/.metadata.yml index 9049f8e79..214951882 100644 --- a/legacy_printers/printer_mods/bryansj/RPi_Frame_with_Heatsink_90deg/.metadata.yml +++ b/legacy_printers/printer_mods/bryansj/RPi_Frame_with_Heatsink_90deg/.metadata.yml @@ -9,4 +9,6 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- RPi_Frame_with_Heatsink_90deg.stl title: Rotated Pi Mount with Heatsink diff --git a/legacy_printers/printer_mods/cadriel/triangle_lab_filament_sensor_mount/.metadata.yml b/legacy_printers/printer_mods/cadriel/triangle_lab_filament_sensor_mount/.metadata.yml index 81e030ab4..953a4e94d 100644 --- a/legacy_printers/printer_mods/cadriel/triangle_lab_filament_sensor_mount/.metadata.yml +++ b/legacy_printers/printer_mods/cadriel/triangle_lab_filament_sensor_mount/.metadata.yml @@ -8,4 +8,7 @@ images: mod_version: 1 printer_compatibility: - V2.2 +stl: +- triangle_lab_filament_sensor_mount_a.stl +- triangle_lab_filament_sensor_mount_b.stl title: Triangle Lab Filament Sensor Mount diff --git a/legacy_printers/printer_mods/chilicoke/Low_profile_exhaust_duct_adapter/.metadata.yml b/legacy_printers/printer_mods/chilicoke/Low_profile_exhaust_duct_adapter/.metadata.yml index 6daddbbeb..e0bdd1b15 100644 --- a/legacy_printers/printer_mods/chilicoke/Low_profile_exhaust_duct_adapter/.metadata.yml +++ b/legacy_printers/printer_mods/chilicoke/Low_profile_exhaust_duct_adapter/.metadata.yml @@ -7,4 +7,10 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- duct_connecting_tube.v2.stl +- duct_grill.stl +- duct_lower_body.v2.stl +- duct_rear_body.v2.stl +- fan_magnetic_grill.stl title: Low Profile Exhaust Duct diff --git a/legacy_printers/printer_mods/christophmuellerorg/duet_maestro_frame_mount_skirt/.metadata.yml b/legacy_printers/printer_mods/christophmuellerorg/duet_maestro_frame_mount_skirt/.metadata.yml index ae25661d9..383587fa9 100644 --- a/legacy_printers/printer_mods/christophmuellerorg/duet_maestro_frame_mount_skirt/.metadata.yml +++ b/legacy_printers/printer_mods/christophmuellerorg/duet_maestro_frame_mount_skirt/.metadata.yml @@ -5,4 +5,7 @@ images: mod_version: 1 printer_compatibility: - V2.2 +stl: +- duet_maestro_board_mounting_frame.stl +- voron2.2_assembly_side_skirt_center_duet_maestro.stl title: Duet Maestro mount for Voron 2.2 diff --git a/legacy_printers/printer_mods/christophmuellerorg/fysetc_panel_due_5_integrated_voron2.2_display_holder/.metadata.yml b/legacy_printers/printer_mods/christophmuellerorg/fysetc_panel_due_5_integrated_voron2.2_display_holder/.metadata.yml index 03306c6ce..794c6677c 100644 --- a/legacy_printers/printer_mods/christophmuellerorg/fysetc_panel_due_5_integrated_voron2.2_display_holder/.metadata.yml +++ b/legacy_printers/printer_mods/christophmuellerorg/fysetc_panel_due_5_integrated_voron2.2_display_holder/.metadata.yml @@ -5,4 +5,8 @@ images: mod_version: 1 printer_compatibility: - V2.2 +stl: +- duet_display_assembly_back.stl +- duet_display_bezel.stl +- duet_display_distance_plate.stl title: FYSETC Panel Due 5i diff --git a/legacy_printers/printer_mods/christophmuellerorg/mains_plug_panel_for_RND_165-00057/.metadata.yml b/legacy_printers/printer_mods/christophmuellerorg/mains_plug_panel_for_RND_165-00057/.metadata.yml index 24d35d2dd..472091c28 100644 --- a/legacy_printers/printer_mods/christophmuellerorg/mains_plug_panel_for_RND_165-00057/.metadata.yml +++ b/legacy_printers/printer_mods/christophmuellerorg/mains_plug_panel_for_RND_165-00057/.metadata.yml @@ -4,4 +4,7 @@ images: [] mod_version: 1 printer_compatibility: - V2.2 +stl: +- mains_plug_panel_filtered_for_RND_165-00057.stl +- mains_plug_panel_filtered_for_RND_165-00057_ac_cover.stl title: Mains plug panel for the RND_165-00057 diff --git a/legacy_printers/printer_mods/daveidmx/30mm_Fan_Adapter/.metadata.yml b/legacy_printers/printer_mods/daveidmx/30mm_Fan_Adapter/.metadata.yml index 908275e18..72f459ac7 100644 --- a/legacy_printers/printer_mods/daveidmx/30mm_Fan_Adapter/.metadata.yml +++ b/legacy_printers/printer_mods/daveidmx/30mm_Fan_Adapter/.metadata.yml @@ -3,4 +3,6 @@ description: 30mm Fan Adapter images: [] mod_version: 1 printer_compatibility: [] +stl: +- 30mm_fan_adapter.stl title: 30mm Fan Adapter diff --git a/legacy_printers/printer_mods/etherwalker/Pi_Zero_Camera_Mount/.metadata.yml b/legacy_printers/printer_mods/etherwalker/Pi_Zero_Camera_Mount/.metadata.yml index 9fe811698..723c57a36 100644 --- a/legacy_printers/printer_mods/etherwalker/Pi_Zero_Camera_Mount/.metadata.yml +++ b/legacy_printers/printer_mods/etherwalker/Pi_Zero_Camera_Mount/.metadata.yml @@ -7,4 +7,7 @@ description: Pi Zero Camera Mount images: [] mod_version: 1 printer_compatibility: [] +stl: +- PiCamMount350.stl +- PiZeroMount.stl title: Pi Zero Camera Mount diff --git a/legacy_printers/printer_mods/exquyre/Anet_12864_display/.metadata.yml b/legacy_printers/printer_mods/exquyre/Anet_12864_display/.metadata.yml index fccb2fb2f..113eee70b 100644 --- a/legacy_printers/printer_mods/exquyre/Anet_12864_display/.metadata.yml +++ b/legacy_printers/printer_mods/exquyre/Anet_12864_display/.metadata.yml @@ -7,4 +7,7 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- Anet_12864_front.stl +- Anet_12864_rear.stl title: Anet 12864 Display diff --git a/legacy_printers/printer_mods/exquyre/LED_bar_mount/.metadata.yml b/legacy_printers/printer_mods/exquyre/LED_bar_mount/.metadata.yml index bca5434e8..b483af260 100644 --- a/legacy_printers/printer_mods/exquyre/LED_bar_mount/.metadata.yml +++ b/legacy_printers/printer_mods/exquyre/LED_bar_mount/.metadata.yml @@ -1,12 +1,14 @@ cad: - - led_mount_v3.step +- led_mount_v3.step description: Mount for 12V LED bars to the top extrusions images: - - led_mount.jpg - - led_bar.jpg - - led_mount_F360_screenshot.jpg +- led_mount.jpg +- led_bar.jpg +- led_mount_F360_screenshot.jpg mod_version: 1 printer_compatibility: - - V2.1 - - V2.2 +- V2.1 +- V2.2 +stl: +- led_mount.stl title: LED Bar Mount diff --git a/legacy_printers/printer_mods/exquyre/cable_cover/.metadata.yml b/legacy_printers/printer_mods/exquyre/cable_cover/.metadata.yml index 1955b381f..38a75d761 100644 --- a/legacy_printers/printer_mods/exquyre/cable_cover/.metadata.yml +++ b/legacy_printers/printer_mods/exquyre/cable_cover/.metadata.yml @@ -5,4 +5,6 @@ images: - cable_cover_F360_screenshot.png mod_version: 1 printer_compatibility: [] +stl: +- cable_cover.stl title: Cable Cover Insert diff --git a/legacy_printers/printer_mods/exquyre/einsy+ramps/.metadata.yml b/legacy_printers/printer_mods/exquyre/einsy+ramps/.metadata.yml index 837557efd..0e70e3895 100644 --- a/legacy_printers/printer_mods/exquyre/einsy+ramps/.metadata.yml +++ b/legacy_printers/printer_mods/exquyre/einsy+ramps/.metadata.yml @@ -6,4 +6,6 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- einsyramps_mount.stl title: Einsy + RAMPS Combo diff --git a/legacy_printers/printer_mods/hackdoggo/BMGobius/.metadata.yml b/legacy_printers/printer_mods/hackdoggo/BMGobius/.metadata.yml index aec325967..aa2836ced 100644 --- a/legacy_printers/printer_mods/hackdoggo/BMGobius/.metadata.yml +++ b/legacy_printers/printer_mods/hackdoggo/BMGobius/.metadata.yml @@ -14,4 +14,9 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- STL/BMGobius_Body_A.STL +- STL/BMGobius_Body_B.STL +- STL/BMGobius_Idler_A.STL +- STL/BMGobius_Idler_B.STL title: BMGobius diff --git a/legacy_printers/printer_mods/hiemmer/Tool_Holders/.metadata.yml b/legacy_printers/printer_mods/hiemmer/Tool_Holders/.metadata.yml index 7d9d53c42..c8ac708d3 100644 --- a/legacy_printers/printer_mods/hiemmer/Tool_Holders/.metadata.yml +++ b/legacy_printers/printer_mods/hiemmer/Tool_Holders/.metadata.yml @@ -5,4 +5,11 @@ images: - Screwdriver_Holder.png mod_version: 1 printer_compatibility: [] +stl: +- Caliper_Hex_Holder.stl +- Panel_Spacer_35mm_0.125in.stl +- Panel_Spacer_35mm_0.25in.stl +- Panel_Spacer_45mm_0.125in.stl +- Panel_Spacer_45mm_0.25in.stl +- Screwdriver_Holder.stl title: Tool Holders diff --git a/legacy_printers/printer_mods/manfre/cable_chains/.metadata.yml b/legacy_printers/printer_mods/manfre/cable_chains/.metadata.yml index 0e825ff21..1e7a2d52f 100644 --- a/legacy_printers/printer_mods/manfre/cable_chains/.metadata.yml +++ b/legacy_printers/printer_mods/manfre/cable_chains/.metadata.yml @@ -10,4 +10,9 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- 10x11_Chain_Bottom_Anchor.stl +- 10x11_Chain_Top_Anchor.stl +- 10x15_Chain_Bottom_Anchor.stl +- 10x15_Chain_Top_Anchor.stl title: Openbuild chain ends diff --git a/legacy_printers/printer_mods/masgar/2-in-1_hotend_housing/.metadata.yml b/legacy_printers/printer_mods/masgar/2-in-1_hotend_housing/.metadata.yml index ac774fa84..1c793d491 100644 --- a/legacy_printers/printer_mods/masgar/2-in-1_hotend_housing/.metadata.yml +++ b/legacy_printers/printer_mods/masgar/2-in-1_hotend_housing/.metadata.yml @@ -1,13 +1,16 @@ cad: - - CAD/2in1_toolhead_housing.f3d - - CAD/2in1_toolhead_housing.step +- CAD/2in1_toolhead_housing.f3d +- CAD/2in1_toolhead_housing.step description: Front/Rear toolhead housing for XCR3D/BTT/BIQU 2-in-1 hotend images: - - images/Mouting_Scheme.png - - images/measures.png +- images/Mouting_Scheme.png +- images/measures.png mod_version: 1 printer_compatibility: - - V1.6 - - V2.1 - - V2.2 +- V1.6 +- V2.1 +- V2.2 +stl: +- STL/2in1_toolhead_housing_front.stl +- STL/2in1_toolhead_housing_rear.stl title: 2-in-1 hotend housing diff --git a/legacy_printers/printer_mods/masgar/BTT_SKR_Mini_v1.1_mounting_frame/.metadata.yml b/legacy_printers/printer_mods/masgar/BTT_SKR_Mini_v1.1_mounting_frame/.metadata.yml index fd650cde0..b6c6a872c 100644 --- a/legacy_printers/printer_mods/masgar/BTT_SKR_Mini_v1.1_mounting_frame/.metadata.yml +++ b/legacy_printers/printer_mods/masgar/BTT_SKR_Mini_v1.1_mounting_frame/.metadata.yml @@ -6,4 +6,6 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- BTT_SKR_Mini_v1.1_mounting_frame.stl title: BTT SKR Mini v1.1 mounting frame diff --git a/legacy_printers/printer_mods/masgar/VoltAmpMeter_Panel_Insert/.metadata.yml b/legacy_printers/printer_mods/masgar/VoltAmpMeter_Panel_Insert/.metadata.yml index aa3c1d289..e52c0c625 100644 --- a/legacy_printers/printer_mods/masgar/VoltAmpMeter_Panel_Insert/.metadata.yml +++ b/legacy_printers/printer_mods/masgar/VoltAmpMeter_Panel_Insert/.metadata.yml @@ -6,4 +6,6 @@ images: mod_version: 1 printer_compatibility: - V1.6 +stl: +- voltamp_box_panel_insert.stl title: VoltAmpMeter panel insert diff --git a/legacy_printers/printer_mods/meteyou/gcode_buttons/.metadata.yml b/legacy_printers/printer_mods/meteyou/gcode_buttons/.metadata.yml index f20d37a43..3e1569c36 100644 --- a/legacy_printers/printer_mods/meteyou/gcode_buttons/.metadata.yml +++ b/legacy_printers/printer_mods/meteyou/gcode_buttons/.metadata.yml @@ -15,4 +15,11 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- STL/base.stl +- STL/cover-empty.stl +- STL/cover-light.stl +- STL/cover-load.stl +- STL/cover-preheat.stl +- STL/lock.stl title: Gcode Buttons diff --git a/legacy_printers/printer_mods/mildw4ve/Beltchain_Remake/.metadata.yml b/legacy_printers/printer_mods/mildw4ve/Beltchain_Remake/.metadata.yml index c42f49042..c4bb7ffd0 100644 --- a/legacy_printers/printer_mods/mildw4ve/Beltchain_Remake/.metadata.yml +++ b/legacy_printers/printer_mods/mildw4ve/Beltchain_Remake/.metadata.yml @@ -5,4 +5,14 @@ images: mod_version: 1 printer_compatibility: - V2.2 +stl: +- Beltchain_Remake_XY/Beltchain_Remake_XY_Cover.stl +- Beltchain_Remake_XY/Beltchain_Remake_XY_End_A.stl +- Beltchain_Remake_XY/Beltchain_Remake_XY_End_B_XY_Bridge.stl +- Beltchain_Remake_XY/Beltchain_Remake_XY_End_B_X_Carriage.stl +- Beltchain_Remake_XY/Beltchain_Remake_XY_End_B_X_Carriage_Anchor.stl +- Beltchain_Remake_XY/Beltchain_Remake_XY_Link.stl +- Beltchain_Remake_Z/Beltchain_Remake_Z_End_A.stl +- Beltchain_Remake_Z/Beltchain_Remake_Z_End_B.stl +- Beltchain_Remake_Z/Beltchain_Remake_Z_Link.stl title: Beltchain Remake diff --git a/legacy_printers/printer_mods/mildw4ve/IR_Probe_Mount_V2.2/.metadata.yml b/legacy_printers/printer_mods/mildw4ve/IR_Probe_Mount_V2.2/.metadata.yml index 0179fe7ce..ab0a8b7da 100644 --- a/legacy_printers/printer_mods/mildw4ve/IR_Probe_Mount_V2.2/.metadata.yml +++ b/legacy_printers/printer_mods/mildw4ve/IR_Probe_Mount_V2.2/.metadata.yml @@ -5,4 +5,6 @@ images: mod_version: 1 printer_compatibility: - V2.2 +stl: +- V2.2_IR_Probe_Mount.stl title: IR Probe Mount diff --git a/legacy_printers/printer_mods/nemgrea/5mm_coroplast_hardware/.metadata.yml b/legacy_printers/printer_mods/nemgrea/5mm_coroplast_hardware/.metadata.yml index 4289d8817..d4dd75e1f 100644 --- a/legacy_printers/printer_mods/nemgrea/5mm_coroplast_hardware/.metadata.yml +++ b/legacy_printers/printer_mods/nemgrea/5mm_coroplast_hardware/.metadata.yml @@ -3,4 +3,8 @@ description: 5mm Coroplast Hardware images: [] mod_version: 1 printer_compatibility: [] +stl: +- 5mm_frame_spacer.STL +- 5mm_rear_coroplast_clip_x4.STL +- 5mm_spool_holder.STL title: 5mm Coroplast Hardware diff --git a/legacy_printers/printer_mods/nemgrea/magnetic_split_front_door/.metadata.yml b/legacy_printers/printer_mods/nemgrea/magnetic_split_front_door/.metadata.yml index 95271fcd0..72a51d29c 100644 --- a/legacy_printers/printer_mods/nemgrea/magnetic_split_front_door/.metadata.yml +++ b/legacy_printers/printer_mods/nemgrea/magnetic_split_front_door/.metadata.yml @@ -13,4 +13,5 @@ images: mod_version: 1 printer_compatibility: - V2.1 +stl: [] title: Magnetic Split Front Door diff --git a/legacy_printers/printer_mods/nemgrea/toolhead_indicator_mounts/.metadata.yml b/legacy_printers/printer_mods/nemgrea/toolhead_indicator_mounts/.metadata.yml index db85def24..84813e1ba 100644 --- a/legacy_printers/printer_mods/nemgrea/toolhead_indicator_mounts/.metadata.yml +++ b/legacy_printers/printer_mods/nemgrea/toolhead_indicator_mounts/.metadata.yml @@ -3,4 +3,5 @@ description: Toolhead Indicator Mounds images: [] mod_version: 1 printer_compatibility: [] +stl: [] title: Toolhead Indicator Mounds diff --git a/legacy_printers/printer_mods/pnokel/Cable_Zipper/.metadata.yml b/legacy_printers/printer_mods/pnokel/Cable_Zipper/.metadata.yml index 0c10bcd96..91a17f96c 100644 --- a/legacy_printers/printer_mods/pnokel/Cable_Zipper/.metadata.yml +++ b/legacy_printers/printer_mods/pnokel/Cable_Zipper/.metadata.yml @@ -3,4 +3,6 @@ description: 14.5mm toothed idler images: [] mod_version: 1 printer_compatibility: [] +stl: +- Cable_Zipper_5000.stl title: Toothed Idler diff --git a/legacy_printers/printer_mods/pnokel/Coroplast_holders/.metadata.yml b/legacy_printers/printer_mods/pnokel/Coroplast_holders/.metadata.yml index 5e805c925..2542d0b39 100644 --- a/legacy_printers/printer_mods/pnokel/Coroplast_holders/.metadata.yml +++ b/legacy_printers/printer_mods/pnokel/Coroplast_holders/.metadata.yml @@ -3,4 +3,10 @@ description: Different coroplast holders for added support images: [] mod_version: 1 printer_compatibility: [] +stl: +- Coroplast_Holder_Back.stl +- Coroplast_Holder_Upper.stl +- Coroplast_Support.stl +- Lower_Cable_Hole.stl +- Upper_Cable_Hole.stl title: Coroplast holders diff --git a/legacy_printers/printer_mods/pnokel/Toothed_Idler/.metadata.yml b/legacy_printers/printer_mods/pnokel/Toothed_Idler/.metadata.yml index 0c10bcd96..a4fc5d13e 100644 --- a/legacy_printers/printer_mods/pnokel/Toothed_Idler/.metadata.yml +++ b/legacy_printers/printer_mods/pnokel/Toothed_Idler/.metadata.yml @@ -3,4 +3,6 @@ description: 14.5mm toothed idler images: [] mod_version: 1 printer_compatibility: [] +stl: +- toothed_idler_small_14.5mm.stl title: Toothed Idler diff --git a/legacy_printers/printer_mods/przybybr/V2_1OmronMount/.metadata.yml b/legacy_printers/printer_mods/przybybr/V2_1OmronMount/.metadata.yml index baa3a46ed..26cbe982d 100644 --- a/legacy_printers/printer_mods/przybybr/V2_1OmronMount/.metadata.yml +++ b/legacy_printers/printer_mods/przybybr/V2_1OmronMount/.metadata.yml @@ -5,4 +5,6 @@ images: [] mod_version: 1 printer_compatibility: - V2.1 +stl: +- Omron_Mount.stl title: V2.1 Omron Mount diff --git a/legacy_printers/printer_mods/randommen96/LCD_bracket_extended/.metadata.yml b/legacy_printers/printer_mods/randommen96/LCD_bracket_extended/.metadata.yml index 5affb7e0d..be9ab6501 100644 --- a/legacy_printers/printer_mods/randommen96/LCD_bracket_extended/.metadata.yml +++ b/legacy_printers/printer_mods/randommen96/LCD_bracket_extended/.metadata.yml @@ -6,4 +6,7 @@ images: [] mod_version: 1 printer_compatibility: - V2.2 +stl: +- Swing_Arm_Long_4mm_ext.STL +- Swing_Arm_Short_ext_4mm.STL title: LCD bracket extended diff --git a/legacy_printers/printer_mods/randommen96/Led_strip_mount_DIODER/.metadata.yml b/legacy_printers/printer_mods/randommen96/Led_strip_mount_DIODER/.metadata.yml index 258946c53..83cc7917b 100644 --- a/legacy_printers/printer_mods/randommen96/Led_strip_mount_DIODER/.metadata.yml +++ b/legacy_printers/printer_mods/randommen96/Led_strip_mount_DIODER/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - V2.2 +stl: +- DIODER_led_strip_mount.STL title: Led strip mount DIODER diff --git a/legacy_printers/printer_mods/randommen96/PSU_bracket/.metadata.yml b/legacy_printers/printer_mods/randommen96/PSU_bracket/.metadata.yml index b0518d228..0f4c0bba6 100644 --- a/legacy_printers/printer_mods/randommen96/PSU_bracket/.metadata.yml +++ b/legacy_printers/printer_mods/randommen96/PSU_bracket/.metadata.yml @@ -6,4 +6,6 @@ images: mod_version: 1 printer_compatibility: - V2.2 +stl: +- PSU_bracket.STL title: PSU bracket diff --git a/legacy_printers/printer_mods/randommen96/Raspi_cam_mount/.metadata.yml b/legacy_printers/printer_mods/randommen96/Raspi_cam_mount/.metadata.yml index 9e8170c4e..2d3d8c0c7 100644 --- a/legacy_printers/printer_mods/randommen96/Raspi_cam_mount/.metadata.yml +++ b/legacy_printers/printer_mods/randommen96/Raspi_cam_mount/.metadata.yml @@ -1,11 +1,14 @@ cad: - - cam_mount_rotatable_wide_cam.STEP - - cam_mount_v2_rotatable.STEP +- cam_mount_rotatable_wide_cam.STEP +- cam_mount_v2_rotatable.STEP description: Cam mount for alie raspi cams images: - - View_from_front.jpg - - View_from_back.jpg +- View_from_front.jpg +- View_from_back.jpg mod_version: 1 printer_compatibility: - - V2.2 +- V2.2 +stl: +- cam_mount_rotatable_wide_cam.STL +- cam_mount_v2_rotatable.STL title: Raspi cam mount diff --git a/legacy_printers/printer_mods/schlank/minima/.metadata.yml b/legacy_printers/printer_mods/schlank/minima/.metadata.yml index 7dca5f7f6..299d948df 100644 --- a/legacy_printers/printer_mods/schlank/minima/.metadata.yml +++ b/legacy_printers/printer_mods/schlank/minima/.metadata.yml @@ -1,11 +1,21 @@ cad: [] description: Minimalistic Fysetc Mini12864 display mount images: - - img/front.jpg - - img/back.jpg - - img/explode.png - - img/installed.jpg +- img/front.jpg +- img/back.jpg +- img/explode.png +- img/installed.jpg mod_version: 1 printer_compatibility: - - V2.2 +- V2.2 +stl: +- base.stl +- cover.stl +- front_skirt_a_250.stl +- front_skirt_a_300.stl +- front_skirt_a_350.stl +- front_skirt_b_250.stl +- front_skirt_b_300.stl +- front_skirt_b_350.stl +- m3_spacer_x4.stl title: Minima diff --git a/legacy_printers/printer_mods/schlank/turbocharger/.metadata.yml b/legacy_printers/printer_mods/schlank/turbocharger/.metadata.yml index 0d54f2cca..b57fa8fb9 100644 --- a/legacy_printers/printer_mods/schlank/turbocharger/.metadata.yml +++ b/legacy_printers/printer_mods/schlank/turbocharger/.metadata.yml @@ -1,13 +1,18 @@ cad: [] description: Alternative fumes extraction solution images: - - img/installed.jpg - - img/assembly_bottom.jpg - - img/assembly_top.jpg - - img/explode.png - - img/turbocharger.png +- img/installed.jpg +- img/assembly_bottom.jpg +- img/assembly_top.jpg +- img/explode.png +- img/turbocharger.png mod_version: 1 printer_compatibility: - - V2.1 - - V2.2 +- V2.1 +- V2.2 +stl: +- base.stl +- fan_duct.stl +- hose_adapter_100mm.stl +- hose_adapter_80mm.stl title: Turbocharger diff --git a/legacy_printers/printer_mods/sporadic/10x15_Chain_Z_Mounts/.metadata.yml b/legacy_printers/printer_mods/sporadic/10x15_Chain_Z_Mounts/.metadata.yml index 40286b275..b995054fc 100644 --- a/legacy_printers/printer_mods/sporadic/10x15_Chain_Z_Mounts/.metadata.yml +++ b/legacy_printers/printer_mods/sporadic/10x15_Chain_Z_Mounts/.metadata.yml @@ -7,4 +7,7 @@ images: mod_version: 1 printer_compatibility: - V2.1 +stl: +- 10x15_Chain_Lower_Z_Mount.stl +- 10x15_Chain_Upper_Z_Mount.stl title: 10x15 Chain Z Mounts diff --git a/legacy_printers/printer_mods/sporadic/30A_Relay_Mount/.metadata.yml b/legacy_printers/printer_mods/sporadic/30A_Relay_Mount/.metadata.yml index 0a80441a9..ffbe35fe5 100644 --- a/legacy_printers/printer_mods/sporadic/30A_Relay_Mount/.metadata.yml +++ b/legacy_printers/printer_mods/sporadic/30A_Relay_Mount/.metadata.yml @@ -1,10 +1,12 @@ cad: [] description: Mount for a 30A relay module available on Amazon images: - - 30A_Relay_Mount.png - - 30A_Relay_Installed.jpg +- 30A_Relay_Mount.png +- 30A_Relay_Installed.jpg mod_version: 1 printer_compatibility: - - V2.1 - - V2.2 +- V2.1 +- V2.2 +stl: +- 30A_Relay_Mount.stl title: 30A Relay Mount diff --git a/legacy_printers/printer_mods/sporadic/Dual_RS-25_Mount/.metadata.yml b/legacy_printers/printer_mods/sporadic/Dual_RS-25_Mount/.metadata.yml index 938cd1d29..4510ba6ad 100644 --- a/legacy_printers/printer_mods/sporadic/Dual_RS-25_Mount/.metadata.yml +++ b/legacy_printers/printer_mods/sporadic/Dual_RS-25_Mount/.metadata.yml @@ -1,11 +1,13 @@ cad: [] description: Dual mount for side by side RS-25 supplies images: - - Mount_Bottom.jpg - - Dual_RS-25_Installed.jpg - - Dual_RS-25_Mount.png +- Mount_Bottom.jpg +- Dual_RS-25_Installed.jpg +- Dual_RS-25_Mount.png mod_version: 1 printer_compatibility: - - V2.1 - - V2.2 +- V2.1 +- V2.2 +stl: +- Dual_RS-25_Mount.stl title: Dual RS-25 Mount diff --git a/legacy_printers/printer_mods/sporadic/Dual_SKR_1.3_Mount/.metadata.yml b/legacy_printers/printer_mods/sporadic/Dual_SKR_1.3_Mount/.metadata.yml index 75c429239..fd28db39a 100644 --- a/legacy_printers/printer_mods/sporadic/Dual_SKR_1.3_Mount/.metadata.yml +++ b/legacy_printers/printer_mods/sporadic/Dual_SKR_1.3_Mount/.metadata.yml @@ -12,4 +12,8 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- Dual_SKR_1.3_Mount.stl +- Dual_SKR_1.3_Mount_40mm_fans.stl +- Dual_SKR_1.3_Mount_40mm_fans_Topless_.stl title: Dual SKR 1.3 Mounts diff --git a/legacy_printers/printer_mods/sporadic/Wago_221_Mounts/.metadata.yml b/legacy_printers/printer_mods/sporadic/Wago_221_Mounts/.metadata.yml index b265999be..460bde604 100644 --- a/legacy_printers/printer_mods/sporadic/Wago_221_Mounts/.metadata.yml +++ b/legacy_printers/printer_mods/sporadic/Wago_221_Mounts/.metadata.yml @@ -7,4 +7,6 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- Wago_221-415-5x1__Mount.stl title: Wago 221-415 Mount diff --git a/legacy_printers/printer_mods/steve450/Corner_Brackets/.metadata.yml b/legacy_printers/printer_mods/steve450/Corner_Brackets/.metadata.yml index c50ff2bc9..0d90dd706 100644 --- a/legacy_printers/printer_mods/steve450/Corner_Brackets/.metadata.yml +++ b/legacy_printers/printer_mods/steve450/Corner_Brackets/.metadata.yml @@ -5,4 +5,9 @@ images: [] mod_version: 1 printer_compatibility: - V2.1 +stl: +- corner_bracket_left_logo.stl +- corner_bracket_left_nologo.stl +- corner_bracket_right_logo.stl +- corner_bracket_right_nologo.stl title: Corner Brackets diff --git a/legacy_printers/printer_mods/synfinatic/Duet-Fan-Mount/.metadata.yml b/legacy_printers/printer_mods/synfinatic/Duet-Fan-Mount/.metadata.yml index f02926f49..b4e8bf1c2 100644 --- a/legacy_printers/printer_mods/synfinatic/Duet-Fan-Mount/.metadata.yml +++ b/legacy_printers/printer_mods/synfinatic/Duet-Fan-Mount/.metadata.yml @@ -8,4 +8,9 @@ printer_compatibility: - V1.6 - V2.1 - V2.2 +stl: +- duet-mount-a.stl +- duet-mount-b.stl +- duet-mount-fan-a.stl +- duet-mount-fan-b.stl title: Duet Fan Mount diff --git a/legacy_printers/printer_mods/synfinatic/E-Stop-Switch/.metadata.yml b/legacy_printers/printer_mods/synfinatic/E-Stop-Switch/.metadata.yml index a7475e4fe..6225d0b2b 100644 --- a/legacy_printers/printer_mods/synfinatic/E-Stop-Switch/.metadata.yml +++ b/legacy_printers/printer_mods/synfinatic/E-Stop-Switch/.metadata.yml @@ -4,4 +4,6 @@ images: [] mod_version: 1 printer_compatibility: - V2.1 +stl: +- E-Stop-Base.stl title: E-Stop Switch diff --git a/legacy_printers/printer_mods/synfinatic/Filament-DryBox/.metadata.yml b/legacy_printers/printer_mods/synfinatic/Filament-DryBox/.metadata.yml index 90cb743cd..b9bbcd288 100644 --- a/legacy_printers/printer_mods/synfinatic/Filament-DryBox/.metadata.yml +++ b/legacy_printers/printer_mods/synfinatic/Filament-DryBox/.metadata.yml @@ -4,4 +4,10 @@ images: [] mod_version: 1 printer_compatibility: - V2.1 +stl: +- Container-Holder-A.stl +- Container-Holder-B.stl +- Spool-Base.stl +- Spool-Brace.stl +- Spool-Roller.stl title: Filament DryBox diff --git a/legacy_printers/printer_mods/synfinatic/LED-Mount/.metadata.yml b/legacy_printers/printer_mods/synfinatic/LED-Mount/.metadata.yml index 077ab2649..d0da2e235 100644 --- a/legacy_printers/printer_mods/synfinatic/LED-Mount/.metadata.yml +++ b/legacy_printers/printer_mods/synfinatic/LED-Mount/.metadata.yml @@ -6,4 +6,6 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- LED-Mount.stl title: LED Mount diff --git a/legacy_printers/printer_mods/synfinatic/PS-Extra-Bracket/.metadata.yml b/legacy_printers/printer_mods/synfinatic/PS-Extra-Bracket/.metadata.yml index 6febf0fe4..bb1377215 100644 --- a/legacy_printers/printer_mods/synfinatic/PS-Extra-Bracket/.metadata.yml +++ b/legacy_printers/printer_mods/synfinatic/PS-Extra-Bracket/.metadata.yml @@ -4,4 +4,6 @@ description: Extra bracket to keep the power supply in place images: [] mod_version: 1 printer_compatibility: [] +stl: +- PS-Extra-Bracket.stl title: PS Extra Bracket diff --git a/legacy_printers/printer_mods/synfinatic/RJ45-Mount/.metadata.yml b/legacy_printers/printer_mods/synfinatic/RJ45-Mount/.metadata.yml index 67ca52210..4a1d095cf 100644 --- a/legacy_printers/printer_mods/synfinatic/RJ45-Mount/.metadata.yml +++ b/legacy_printers/printer_mods/synfinatic/RJ45-Mount/.metadata.yml @@ -5,4 +5,7 @@ description: Mount for an ethernet coupler to extend / move the ethernet plug so images: [] mod_version: 1 printer_compatibility: [] +stl: +- RJ45-Mount-a.stl +- RJ45-Mount-b.stl title: RJ45 Mount diff --git a/legacy_printers/printer_mods/warriorofwire/bmg_direct_drive/.metadata.yml b/legacy_printers/printer_mods/warriorofwire/bmg_direct_drive/.metadata.yml index 376e1dede..8f24406dd 100644 --- a/legacy_printers/printer_mods/warriorofwire/bmg_direct_drive/.metadata.yml +++ b/legacy_printers/printer_mods/warriorofwire/bmg_direct_drive/.metadata.yml @@ -8,4 +8,8 @@ mod_version: 1 printer_compatibility: - V2.1 - V2.2 +stl: +- fan_mount.stl +- gumby_mount_mosquito.stl +- gumby_mount_v6.stl title: Direct Drive BMG-m mount diff --git a/legacy_printers/printer_mods/warriorofwire/openbuilds_drag_chain_2.1/.metadata.yml b/legacy_printers/printer_mods/warriorofwire/openbuilds_drag_chain_2.1/.metadata.yml index 35a37b478..23ea77779 100644 --- a/legacy_printers/printer_mods/warriorofwire/openbuilds_drag_chain_2.1/.metadata.yml +++ b/legacy_printers/printer_mods/warriorofwire/openbuilds_drag_chain_2.1/.metadata.yml @@ -5,4 +5,10 @@ images: [] mod_version: 1 printer_compatibility: - V2.1 +stl: +- a_corner_wire_guide.stl +- lower_drag_chain_mount.stl +- xy_drag_chain_bridge.stl +- x_carriage_dragchain_anchorpoint.stl +- x_carriage_frame_right_remodeled.stl title: Openbuilds Drag Chain 2.1 diff --git a/legacy_printers/printer_mods/warriorofwire/openbuilds_drag_chain_2.2/.metadata.yml b/legacy_printers/printer_mods/warriorofwire/openbuilds_drag_chain_2.2/.metadata.yml index 52d2a0089..bd4fd2b3d 100644 --- a/legacy_printers/printer_mods/warriorofwire/openbuilds_drag_chain_2.2/.metadata.yml +++ b/legacy_printers/printer_mods/warriorofwire/openbuilds_drag_chain_2.2/.metadata.yml @@ -8,4 +8,11 @@ images: mod_version: 1 printer_compatibility: - V2.2 +stl: +- a_corner_tube.stl +- lower_z_mount.stl +- upper_z_mount.stl +- xy_bridge.stl +- x_carriage_mount.stl +- x_carriage_mount_but_its_10mm_taller.stl title: Openbuilds Drag Chain 2.2 diff --git a/legacy_printers/printer_mods/wile.e.coyote/coroplast_support/.metadata.yml b/legacy_printers/printer_mods/wile.e.coyote/coroplast_support/.metadata.yml index c94d69067..93f6b3ae5 100644 --- a/legacy_printers/printer_mods/wile.e.coyote/coroplast_support/.metadata.yml +++ b/legacy_printers/printer_mods/wile.e.coyote/coroplast_support/.metadata.yml @@ -3,5 +3,8 @@ description: Support for the coroplast to prevent sagging images: [] mod_version: 1 printer_compatibility: - - V2.1 +- V2.1 +stl: +- coroplast_support_lower.stl +- coroplast_support_upper.stl title: Coroplast Support diff --git a/legacy_printers/printer_mods/wile.e.coyote/dual_buck_bracket/.metadata.yml b/legacy_printers/printer_mods/wile.e.coyote/dual_buck_bracket/.metadata.yml index bab95c5fd..5709dc297 100644 --- a/legacy_printers/printer_mods/wile.e.coyote/dual_buck_bracket/.metadata.yml +++ b/legacy_printers/printer_mods/wile.e.coyote/dual_buck_bracket/.metadata.yml @@ -3,7 +3,9 @@ description: Mounting bracket for 2 buck converters images: [] mod_version: 1 printer_compatibility: - - V1.6 - - V2.1 - - V2.2 +- V1.6 +- V2.1 +- V2.2 +stl: +- dual_buck_bracket_rev2.stl title: Dual Buck Bracket diff --git a/legacy_printers/printer_mods/wile.e.coyote/nozzle_scrubber_mount/.metadata.yml b/legacy_printers/printer_mods/wile.e.coyote/nozzle_scrubber_mount/.metadata.yml index 55cdc1c53..4822d05c4 100644 --- a/legacy_printers/printer_mods/wile.e.coyote/nozzle_scrubber_mount/.metadata.yml +++ b/legacy_printers/printer_mods/wile.e.coyote/nozzle_scrubber_mount/.metadata.yml @@ -3,6 +3,8 @@ description: Mount for brass brush. Used for cleaning nozzle before printing images: [] mod_version: 1 printer_compatibility: - - V2.1 - - V2.2 +- V2.1 +- V2.2 +stl: +- nozzle_scrubber_mount.stl title: Nozzle Scrubber Mount diff --git a/legacy_printers/printer_mods/wile.e.coyote/wago_mounts/.metadata.yml b/legacy_printers/printer_mods/wile.e.coyote/wago_mounts/.metadata.yml index bf38d1eb6..2ca4baca9 100644 --- a/legacy_printers/printer_mods/wile.e.coyote/wago_mounts/.metadata.yml +++ b/legacy_printers/printer_mods/wile.e.coyote/wago_mounts/.metadata.yml @@ -3,7 +3,11 @@ description: Different mounts for Wago connectors images: [] mod_version: 1 printer_compatibility: - - V1.6 - - V2.1 - - V2.2 +- V1.6 +- V2.1 +- V2.2 +stl: +- wago_mount-222-412-use_supports-.stl +- wago_mount-222-413-use_supports-.stl +- wago_mount-222-415-use_supports-.stl title: Wago Mounts diff --git a/orphaned_mods/Badnoob/Rail_Alignment/.metadata.yml b/orphaned_mods/Badnoob/Rail_Alignment/.metadata.yml index 60256207b..bdb20baf9 100644 --- a/orphaned_mods/Badnoob/Rail_Alignment/.metadata.yml +++ b/orphaned_mods/Badnoob/Rail_Alignment/.metadata.yml @@ -5,4 +5,7 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- Dial_indicator_AB_beta.stl +- Rail_adjust_body.stl title: Rail Alignment diff --git a/orphaned_mods/Chaoticlab/Tool_free_tensioner/.metadata.yml b/orphaned_mods/Chaoticlab/Tool_free_tensioner/.metadata.yml index bdda548db..19eb982c3 100644 --- a/orphaned_mods/Chaoticlab/Tool_free_tensioner/.metadata.yml +++ b/orphaned_mods/Chaoticlab/Tool_free_tensioner/.metadata.yml @@ -7,4 +7,8 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/bracket.stl +- STL/tensioner.stl +- STL/wheel.stl title: Tool_free_tensioner diff --git a/orphaned_mods/LED_mount/.metadata.yml b/orphaned_mods/LED_mount/.metadata.yml index 9f3e00d64..9236dd01e 100644 --- a/orphaned_mods/LED_mount/.metadata.yml +++ b/orphaned_mods/LED_mount/.metadata.yml @@ -10,4 +10,11 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- AngryLED_l_v1.stl +- AngryLED_r_v1.stl +- AngryLED_small_l_v1.stl +- AngryLED_small_r_v1.stl +- LED_mount_l_v01.stl +- LED_mount_r_v01.stl title: LED mount diff --git a/orphaned_mods/MarcPot/Skirt_Mods/.metadata.yml b/orphaned_mods/MarcPot/Skirt_Mods/.metadata.yml index 95bff87a0..56466e760 100644 --- a/orphaned_mods/MarcPot/Skirt_Mods/.metadata.yml +++ b/orphaned_mods/MarcPot/Skirt_Mods/.metadata.yml @@ -3,12 +3,25 @@ cad: - CAD/Keystone_Skirt.f3d description: Skirt mod for a mechanical hour counter and keystone inserts images: -- Images/hour_counter_skirt.JPEG -- Images/hour_counter_skirt_empty.JPEG -- Images/keystone_skirt_empty.JPEG -- Images/all_skirt_mods.JPEG +- Images/hour_counter_skirt.JPEG +- Images/hour_counter_skirt_empty.JPEG +- Images/keystone_skirt_empty.JPEG +- Images/all_skirt_mods.JPEG - Images/keystone_skirt.JPEG mod_version: 1 printer_compatibility: - V2.4 +stl: +- 250/hour_counter_skirt_a_250.stl +- 250/hour_counter_skirt_b_250.stl +- 250/keystone_skirt_a_250.stl +- 250/keystone_skirt_b_250.stl +- 300/hour_counter_skirt_a_300.stl +- 300/hour_counter_skirt_b_300.stl +- 300/keystone_skirt_a_300.stl +- 300/keystone_skirt_b_300.stl +- 350/hour_counter_skirt_a_350.stl +- 350/hour_counter_skirt_b_350.stl +- 350/keystone_skirt_a_350.stl +- 350/keystone_skirt_b_350.stl title: Hour Counter Skirt + Keystone Skirt diff --git a/orphaned_mods/MarcPot/UHP_PSU_Bracket_Clip/.metadata.yml b/orphaned_mods/MarcPot/UHP_PSU_Bracket_Clip/.metadata.yml index fe70a5934..e6645a9ab 100644 --- a/orphaned_mods/MarcPot/UHP_PSU_Bracket_Clip/.metadata.yml +++ b/orphaned_mods/MarcPot/UHP_PSU_Bracket_Clip/.metadata.yml @@ -13,4 +13,9 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- uhp_200_psu_bracket_double_rail_heatset_insert_x2.stl +- uhp_200_psu_bracket_double_rail_hexnut_x2.stl +- uhp_200_psu_bracket_heatset_insert.stl +- uhp_200_psu_bracket_hexnut.stl title: UHP PSU Bracket Clip diff --git a/orphaned_mods/Maverick/V0.2_Handles/.metadata.yml b/orphaned_mods/Maverick/V0.2_Handles/.metadata.yml index 9c176142c..704315881 100644 --- a/orphaned_mods/Maverick/V0.2_Handles/.metadata.yml +++ b/orphaned_mods/Maverick/V0.2_Handles/.metadata.yml @@ -11,4 +11,8 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/V0.2_Handle_Part_A_x2.stl +- STL/V0.2_Handle_Part_B_x2.stl +- STL/[a]_V0.2_Handle_Logo_Insert_x2.stl title: V0.2 Handles diff --git a/orphaned_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber/.metadata.yml b/orphaned_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber/.metadata.yml index a08358cae..73f81fca0 100644 --- a/orphaned_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber/.metadata.yml +++ b/orphaned_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber/.metadata.yml @@ -18,4 +18,25 @@ mod_version: 1 printer_compatibility: - V1.8 - V2.4 +stl: +- Legacy_Revisions/Rev1+2/STLs/brush_holder_rev1+2.stl +- Legacy_Revisions/Rev1+2/STLs/brush_holder_sheet_stop_rev1+2.stl +- Legacy_Revisions/Rev1+2/STLs/individual_sheet_stop_rev1+2.stl +- Legacy_Revisions/Rev1+2/STLs/individual_sheet_stop_v2.2_z_endstop_rev1+2.stl +- Legacy_Revisions/Rev1+2/STLs/purge_bucket_250mm_rev1+2.stl +- Legacy_Revisions/Rev1+2/STLs/purge_bucket_300mm_rev1+2.stl +- Legacy_Revisions/Rev1+2/STLs/purge_bucket_350mm_rev1+2.stl +- Legacy_Revisions/Rev3/STLs/brush_holder_sheet_stop_rev3.stl +- Legacy_Revisions/Rev3/STLs/individual_sheetstop_V2.2_rev3.stl +- Legacy_Revisions/Rev3/STLs/individual_sheetstop_V2.4_rev3.stl +- Legacy_Revisions/Rev3/STLs/purge_bucket_250mm_rev3.stl +- Legacy_Revisions/Rev3/STLs/purge_bucket_300mm_rev3.stl +- Legacy_Revisions/Rev3/STLs/purge_bucket_350mm_rev3.stl +- STLs/brush_holder_sheet_stop_rev4.stl +- STLs/extension_bracket_v1.8_rev4.stl +- STLs/individual_sheetstop_v1.8_v2.4_rev4.stl +- STLs/individual_sheetstop_v2.2_rev4.stl +- STLs/purge_bucket_250mm_rev4.stl +- STLs/purge_bucket_300mm_rev4.stl +- STLs/purge_bucket_350mm_rev4.stl title: Decontaminator Purge Bucket & Nozzle Scrubber diff --git a/orphaned_mods/edwardyeeks/V2.4_z_drive_motor_tensioner_mod/.metadata.yml b/orphaned_mods/edwardyeeks/V2.4_z_drive_motor_tensioner_mod/.metadata.yml index 79410649a..2cdcdf0c5 100644 --- a/orphaned_mods/edwardyeeks/V2.4_z_drive_motor_tensioner_mod/.metadata.yml +++ b/orphaned_mods/edwardyeeks/V2.4_z_drive_motor_tensioner_mod/.metadata.yml @@ -8,4 +8,17 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/z_motor_mount_a_mod_x2.stl +- STLs/z_motor_mount_b_mod_x2.stl +- STLs/[a]_2.4_base_plate_a_mod_x2.stl +- STLs/[a]_2.4_base_plate_b_mod_x2.stl +- STLs/[a]_base_plate_a_mod_x2.stl +- STLs/[a]_base_plate_b_mod_x2.stl +- STLs/Skirts/250/250_front_rear_skirt_a_x2mod.stl +- STLs/Skirts/250/250_front_rear_skirt_b_x2mod.stl +- STLs/Skirts/300/300_front_rear_skirt_a_x2mod.stl +- STLs/Skirts/300/300_front_rear_skirt_b_x2mod.stl +- STLs/Skirts/350/350_front_rear_skirt_a_x2_mod.stl +- STLs/Skirts/350/350_front_rear_skirt_b_x2mod.stl title: V2.4 Z Drive Motor Tensioner Mod diff --git a/printer_mods/1-0-R/handle/.metadata.yml b/printer_mods/1-0-R/handle/.metadata.yml index 068d3fa8a..ab6a6b3fd 100644 --- a/printer_mods/1-0-R/handle/.metadata.yml +++ b/printer_mods/1-0-R/handle/.metadata.yml @@ -17,4 +17,8 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/handle_inner_part.stl +- STL/handle_outer_part.stl +- STL/[a]_handle_middle_part.stl title: V2.4 handle diff --git a/printer_mods/120decibell/exhaust_housing_side_entry/.metadata.yml b/printer_mods/120decibell/exhaust_housing_side_entry/.metadata.yml index dbddbf0fa..1af11512a 100644 --- a/printer_mods/120decibell/exhaust_housing_side_entry/.metadata.yml +++ b/printer_mods/120decibell/exhaust_housing_side_entry/.metadata.yml @@ -10,4 +10,9 @@ printer_compatibility: - V1.8 - V2.4 - VT +stl: +- STL/exhaust_filter_housing.stl +- STL/[a]_exhaust_housing_insert_plug.stl +- STL/[a]_exhaust_housing_insert_thread.stl +- STL/[a]_filter_access_cover.stl title: Side entry exhaust housing diff --git a/printer_mods/120decibell/huvud_chain_mount/.metadata.yml b/printer_mods/120decibell/huvud_chain_mount/.metadata.yml index 1b3640f53..e157eddbb 100644 --- a/printer_mods/120decibell/huvud_chain_mount/.metadata.yml +++ b/printer_mods/120decibell/huvud_chain_mount/.metadata.yml @@ -10,4 +10,7 @@ mod_version: 1 printer_compatibility: - V1.8 - VT +stl: +- STL/huvud_chain_mount_2_hole.stl +- STL/huvud_chain_mount_3_hole.stl title: Huvud Chain Mount diff --git a/printer_mods/3dpandme/Fannypack_zero/.metadata.yml b/printer_mods/3dpandme/Fannypack_zero/.metadata.yml index b1dc58d84..235a02e9d 100644 --- a/printer_mods/3dpandme/Fannypack_zero/.metadata.yml +++ b/printer_mods/3dpandme/Fannypack_zero/.metadata.yml @@ -8,4 +8,6 @@ printer_compatibility: - V0.2 - VSW - VT +stl: +- fannypack_zero.stl title: FANnypack zero diff --git a/printer_mods/3dpandme/Thermistor_holder_zero/.metadata.yml b/printer_mods/3dpandme/Thermistor_holder_zero/.metadata.yml index 920dbc4d7..843abdb2d 100644 --- a/printer_mods/3dpandme/Thermistor_holder_zero/.metadata.yml +++ b/printer_mods/3dpandme/Thermistor_holder_zero/.metadata.yml @@ -9,4 +9,6 @@ printer_compatibility: - V0.2 - VSW - VT +stl: +- thermistor_holder_zero.stl title: Thermistor holder zero diff --git a/printer_mods/3vilson/V0.1_Skirt_Holes/.metadata.yml b/printer_mods/3vilson/V0.1_Skirt_Holes/.metadata.yml index d8652ffb0..b02d63be8 100644 --- a/printer_mods/3vilson/V0.1_Skirt_Holes/.metadata.yml +++ b/printer_mods/3vilson/V0.1_Skirt_Holes/.metadata.yml @@ -5,4 +5,8 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Skirt_x3_L_access_hole.stl +- Skirt_x3_ONEPART_access_hole.stl +- Skirt_x3_R_access_hole.stl title: V0.1_Skirt_Holes diff --git a/printer_mods/3vilson/V0.1_Skirt_Inlet/.metadata.yml b/printer_mods/3vilson/V0.1_Skirt_Inlet/.metadata.yml index 4dfe8f22c..95663e4cc 100644 --- a/printer_mods/3vilson/V0.1_Skirt_Inlet/.metadata.yml +++ b/printer_mods/3vilson/V0.1_Skirt_Inlet/.metadata.yml @@ -5,4 +5,8 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Foot_Rear_Left_x1.stl +- Foot_Rear_Right_x1.stl +- Skirt_x1_Back_Powerinlet_ONEPART.stl title: V0.1_Skirt_Inlet diff --git a/printer_mods/42bios/corner_panel_clip_cable/.metadata.yml b/printer_mods/42bios/corner_panel_clip_cable/.metadata.yml index f2f2ca59c..0ee4f15ca 100644 --- a/printer_mods/42bios/corner_panel_clip_cable/.metadata.yml +++ b/printer_mods/42bios/corner_panel_clip_cable/.metadata.yml @@ -7,4 +7,9 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- corner_panel_clip_7_5mm.stl +- corner_panel_clip_bottom_3_5mm.stl +- corner_panel_clip_top_4mm.stl +- midspan_panel_clip_7_5mm.stl title: Corner panel clip w. cable diff --git a/printer_mods/42bios/exhaust_filter_housing_side/.metadata.yml b/printer_mods/42bios/exhaust_filter_housing_side/.metadata.yml index f0c328d17..4e99d2e55 100644 --- a/printer_mods/42bios/exhaust_filter_housing_side/.metadata.yml +++ b/printer_mods/42bios/exhaust_filter_housing_side/.metadata.yml @@ -6,4 +6,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- exhaust_filter_housing_side.stl title: Exhaust filter housing - side thread diff --git a/printer_mods/42bios/relay_mount/.metadata.yml b/printer_mods/42bios/relay_mount/.metadata.yml index 48706a04a..c39ba3c64 100644 --- a/printer_mods/42bios/relay_mount/.metadata.yml +++ b/printer_mods/42bios/relay_mount/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- relay_mount.stl title: relay mount diff --git a/printer_mods/AVieira/Universal_Phone_Mount/.metadata.yml b/printer_mods/AVieira/Universal_Phone_Mount/.metadata.yml index 9bee9bbee..6113cb998 100644 --- a/printer_mods/AVieira/Universal_Phone_Mount/.metadata.yml +++ b/printer_mods/AVieira/Universal_Phone_Mount/.metadata.yml @@ -1,13 +1,3 @@ ---- -# The title of your mod. Choose a short and descriptive name -title: Universal_Phone_Mount - -description: This mod allows the use of different smartphones or possibly tablets that you may want to use for klipperscreen. - -mod_version: 1 - -discord_username: AVieira - cad: - CAD/Guide_x2.stp - CAD/case_front.stp @@ -15,7 +5,9 @@ cad: - CAD/claw_bottom.stp - CAD/claw_top.stp - CAD/slider.stp - +description: This mod allows the use of different smartphones or possibly tablets + that you may want to use for klipperscreen. +discord_username: AVieira images: - Images/CAD_parts/case_front.png - Images/CAD_parts/case_rear.png @@ -44,6 +36,33 @@ images: - Images/Slider_Elastic_Main_Assembly.jpg - Images/Slider_Inserts.jpg - Images/case_front.png - +mod_version: 1 printer_compatibility: - V2.4r2 +stl: +- STLs/case_front.stl +- STLs/case_rear.stl +- STLs/Guide_x2.stl +- STLs/Claw_bottom/[a]_claw_bottom_10.5mm.stl +- STLs/Claw_bottom/[a]_claw_bottom_11.5mm.stl +- STLs/Claw_bottom/[a]_claw_bottom_12.5mm.stl +- STLs/Claw_bottom/[a]_claw_bottom_13.5mm.stl +- STLs/Claw_bottom/[a]_claw_bottom_6.5mm.stl +- STLs/Claw_bottom/[a]_claw_bottom_7.5mm.stl +- STLs/Claw_bottom/[a]_claw_bottom_8.5mm.stl +- STLs/Claw_bottom/[a]_claw_bottom_9.5mm.stl +- STLs/Claw_top/[a]_claw_top_10.5mm.stl +- STLs/Claw_top/[a]_claw_top_11.5mm.stl +- STLs/Claw_top/[a]_claw_top_12.5mm.stl +- STLs/Claw_top/[a]_claw_top_13.5mm.stl +- STLs/Claw_top/[a]_claw_top_6.5mm.stl +- STLs/Claw_top/[a]_claw_top_7.5mm.stl +- STLs/Claw_top/[a]_claw_top_8.5mm.stl +- STLs/Claw_top/[a]_claw_top_9.5mm.stl +- STLs/Slider/slider_100mm.stl +- STLs/Slider/slider_150mm.stl +- STLs/Slider/slider_170mm.stl +- STLs/Slider/slider_190mm.stl +- STLs/Slider/slider_80mm.stl +- STLs/Slider/slider_90mm.stl +title: Universal_Phone_Mount diff --git a/printer_mods/Akio/cable_routing_z_belt_cover/.metadata.yml b/printer_mods/Akio/cable_routing_z_belt_cover/.metadata.yml index ffbc4ba81..dd8515a5d 100644 --- a/printer_mods/Akio/cable_routing_z_belt_cover/.metadata.yml +++ b/printer_mods/Akio/cable_routing_z_belt_cover/.metadata.yml @@ -16,11 +16,20 @@ images: - img/cable_routing_z_belt_cover_mod_v2.4_img_0.png - img/cable_routing_z_belt_cover_mod_v2.4_img_1.png - img/cable_routing_z_belt_cover_mod_rail_notch_v2.4_img_2.png -- img/cable_routing_z_belt_cover_mod_cable_routing.png -- img/cable_routing_z_belt_cover_mod_cross_section_view_rail_notch.png +- img/cable_routing_z_belt_cover_mod_cable_routing.png +- img/cable_routing_z_belt_cover_mod_cross_section_view_rail_notch.png - img/cable_routing_z_belt_cover_mod_cross_section_view.png - img/cable_routing_z_belt_cover_mod.png mod_version: 1 printer_compatibility: - V2.4 +stl: +- stl/cable_routing_z_belt_cover_a_mod_rail_notch_v2.2.stl +- stl/cable_routing_z_belt_cover_a_mod_rail_notch_v2.4.stl +- stl/cable_routing_z_belt_cover_a_mod_v2.2.stl +- stl/cable_routing_z_belt_cover_a_mod_v2.4.stl +- stl/cable_routing_z_belt_cover_b_mod_rail_notch_v2.2.stl +- stl/cable_routing_z_belt_cover_b_mod_rail_notch_v2.4.stl +- stl/cable_routing_z_belt_cover_b_mod_v2.2.stl +- stl/cable_routing_z_belt_cover_b_mod_v2.4.stl title: Hidden cable routing z belt cover diff --git a/printer_mods/AlexanderT-Moss/270-Clamping-Hinges/.metadata.yml b/printer_mods/AlexanderT-Moss/270-Clamping-Hinges/.metadata.yml index ca33312e5..fd2cd5dfc 100644 --- a/printer_mods/AlexanderT-Moss/270-Clamping-Hinges/.metadata.yml +++ b/printer_mods/AlexanderT-Moss/270-Clamping-Hinges/.metadata.yml @@ -12,4 +12,11 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/face_plate_bottom.stl +- STLs/face_plate_embossed_logo.stl +- STLs/face_plate_no_logo.stl +- STLs/face_plate_through_logo.stl +- STLs/side_mount.stl +- STLs/side_mount_brimed.stl title: 270 Clamping Hinges diff --git a/printer_mods/Andre/Mini_Afterburner_ADXL345_Mount/.metadata.yml b/printer_mods/Andre/Mini_Afterburner_ADXL345_Mount/.metadata.yml index 9a5edf538..8f157a1db 100644 --- a/printer_mods/Andre/Mini_Afterburner_ADXL345_Mount/.metadata.yml +++ b/printer_mods/Andre/Mini_Afterburner_ADXL345_Mount/.metadata.yml @@ -9,4 +9,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/MiniAB_ADXL345_Mount.stl title: Mini Afterburner ADXL345 Mount diff --git a/printer_mods/Andre/Mini_Afterburner_Strain_Relief/.metadata.yml b/printer_mods/Andre/Mini_Afterburner_Strain_Relief/.metadata.yml index 6269bb609..7d24d9c13 100644 --- a/printer_mods/Andre/Mini_Afterburner_Strain_Relief/.metadata.yml +++ b/printer_mods/Andre/Mini_Afterburner_Strain_Relief/.metadata.yml @@ -8,4 +8,8 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/Strain_Relief_Body_Top_x1.stl +- STL/Strain_Relief_Body_x1.stl +- STL/Strain_Relief_Spacer_x2.stl title: Mini Afterburner Strain Relief diff --git a/printer_mods/Andre/Revo_Nozzle_Skirt_Trident/.metadata.yml b/printer_mods/Andre/Revo_Nozzle_Skirt_Trident/.metadata.yml index 7f6ee4179..a704b50a2 100644 --- a/printer_mods/Andre/Revo_Nozzle_Skirt_Trident/.metadata.yml +++ b/printer_mods/Andre/Revo_Nozzle_Skirt_Trident/.metadata.yml @@ -7,4 +7,17 @@ images: mod_version: 1 printer_compatibility: - VT +stl: +- STL/Nozzle_Holder_250_A.stl +- STL/Nozzle_Holder_250_B.stl +- STL/Nozzle_Holder_300_A.stl +- STL/Nozzle_Holder_300_B.stl +- STL/Nozzle_Holder_350_A.stl +- STL/Nozzle_Holder_350_B.stl +- STL/Skirt_250_A.stl +- STL/Skirt_250_B.stl +- STL/Skirt_300_A.stl +- STL/Skirt_300_B.stl +- STL/Skirt_350_A.stl +- STL/Skirt_350_B.stl title: Revo Nozzle Skirt diff --git a/printer_mods/Andre/V0_Neopixel_Front_Bed_Mount/.metadata.yml b/printer_mods/Andre/V0_Neopixel_Front_Bed_Mount/.metadata.yml index 9a9a86e7c..6a4194901 100644 --- a/printer_mods/Andre/V0_Neopixel_Front_Bed_Mount/.metadata.yml +++ b/printer_mods/Andre/V0_Neopixel_Front_Bed_Mount/.metadata.yml @@ -10,4 +10,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/Diffuser_x1.stl +- STL/Front_Bed_Mount_x1.stl title: V0 Neopixel Front Bed Mount diff --git a/printer_mods/Backenfutter/Mount_for_Electreeks_Camera/.metadata.yml b/printer_mods/Backenfutter/Mount_for_Electreeks_Camera/.metadata.yml index 2f2fc816c..9184634da 100644 --- a/printer_mods/Backenfutter/Mount_for_Electreeks_Camera/.metadata.yml +++ b/printer_mods/Backenfutter/Mount_for_Electreeks_Camera/.metadata.yml @@ -5,4 +5,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/Mount_for_Electreeks_Cam.stl title: Mount for Electreeks Camera diff --git a/printer_mods/Badnoob/AB-BN/.metadata.yml b/printer_mods/Badnoob/AB-BN/.metadata.yml index 50fdb0c60..76ee8213d 100644 --- a/printer_mods/Badnoob/AB-BN/.metadata.yml +++ b/printer_mods/Badnoob/AB-BN/.metadata.yml @@ -17,4 +17,31 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STL_files/5015-deearing-tool-b.stl +- STL_files/5015-deearing-tool.stl +- STL_files/AB-BN-28_Hotend-Dragon-Back.stl +- STL_files/AB-BN-28_Hotend-E3Dv6-Back.stl +- STL_files/AB-BN-28_Hotend-E3Dv6-Front.stl +- STL_files/AB-BN-28_SPACER.stl +- STL_files/AB-BN-28_SPRING.stl +- STL_files/ab-bn-30_Fan_back.stl +- STL_files/ab-bn-30_Fan_FRONT.stl +- STL_files/AB-BN-30_Hotend-E3D_REVO-back.stl +- STL_files/AB-BN-30_Hotend-E3D_REVO-front.stl +- STL_files/AB-BN-30_Hotend-Phaetus_BMO-back.stl +- STL_files/AB-BN-30_Hotend-Phaetus_BMO-front.stl +- STL_files/AB-BN-30_Hotend-Phaetus_BMS-back.stl +- STL_files/AB-BN-30_Hotend-Phaetus_BMS-front.stl +- STL_files/AB-BN-30_hotend-Rapido-back.stl +- STL_files/AB-BN-30_hotend-Rapido-front.stl +- STL_files/AB-BN-30_Hotend-Zodiac_BMO-back.stl +- STL_files/AB-BN-30_Hotend-Zodiac_BMO-front.stl +- STL_files/AB-BN-30_Hotend-Zodiac_BMO_back.stl +- STL_files/AB-BN-30_Hotend-Zodiac_BMO_front.stl +- STL_files/AB-BN-30_Hotend-Zodiac_BMS-back.stl +- STL_files/AB-BN-30_Hotend-Zodiac_BMS-front.stl +- STL_files/AB_BN_30_Hotend-Dragon-front.stl +- STL_files/AB_BN_30_Hotend-E3D_revo_voron-back.stl +- STL_files/AB_BN_30_Hotend-E3D_revo_voron-front.stl title: AB-BN Afterburner mod (5015) diff --git a/printer_mods/Badnoob/ABBN_for_Stock/.metadata.yml b/printer_mods/Badnoob/ABBN_for_Stock/.metadata.yml index 2bf11d415..bcfdca654 100644 --- a/printer_mods/Badnoob/ABBN_for_Stock/.metadata.yml +++ b/printer_mods/Badnoob/ABBN_for_Stock/.metadata.yml @@ -10,4 +10,10 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STLs/ABBN_4020_Dragon_Front.stl +- STLs/ABBN_4020_Rapido_Back.stl +- STLs/ABBN_4020_Rapido_Front.stl +- STLs/ABBN_4020_REVO_Voron_Back.stl +- STLs/ABBN_4020_REVO_Voron_Front.stl title: AB-BN for Stock Afterburner (4020) diff --git a/printer_mods/Badnoob/Precision_AB_Drive/.metadata.yml b/printer_mods/Badnoob/Precision_AB_Drive/.metadata.yml index 089feb798..e4121ebb4 100644 --- a/printer_mods/Badnoob/Precision_AB_Drive/.metadata.yml +++ b/printer_mods/Badnoob/Precision_AB_Drive/.metadata.yml @@ -8,4 +8,9 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- left_drive_frame_lower_x1_rev_awh3.stl +- left_drive_frame_upper_x1_rev_awh3.stl +- right_drive_frame_lower_x1_rev_awh3.stl +- right_drive_frame_upper_x1_rev_awh3.stl title: Precision AB Drive diff --git a/printer_mods/Baltojikale/LoudOwl_aka_Stabby/.metadata.yml b/printer_mods/Baltojikale/LoudOwl_aka_Stabby/.metadata.yml index 8985907ba..eb722fb27 100644 --- a/printer_mods/Baltojikale/LoudOwl_aka_Stabby/.metadata.yml +++ b/printer_mods/Baltojikale/LoudOwl_aka_Stabby/.metadata.yml @@ -18,4 +18,12 @@ printer_compatibility: - V1.8 - V2.4 - VSW +stl: +- STL/Back.stl +- STL/Cut_tool.stl +- STL/Front_piece_w_supports.stl +- STL/Logo_piece_w_support.stl +- STL/without_in_build_supports/Back_piece.stl +- STL/without_in_build_supports/Front_piece.stl +- STL/without_in_build_supports/Logo_piece.stl title: LoudOwl aka Stabby diff --git a/printer_mods/BladeScraper-Designs/CornerPanel_SpoolHolder/.metadata.yml b/printer_mods/BladeScraper-Designs/CornerPanel_SpoolHolder/.metadata.yml index 5ca331b61..5de3da981 100644 --- a/printer_mods/BladeScraper-Designs/CornerPanel_SpoolHolder/.metadata.yml +++ b/printer_mods/BladeScraper-Designs/CornerPanel_SpoolHolder/.metadata.yml @@ -7,4 +7,10 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/SpoolHolder.stl +- STL/CornerPanel/CornerPanel_2.5mm.stl +- STL/CornerPanel/CornerPanel_2mm.stl +- STL/CornerPanel/CornerPanel_3.25mm.stl +- STL/CornerPanel/CornerPanel_3mm.stl title: CornerPanel_SpoolHolder diff --git a/printer_mods/BladeScraper-Designs/Horizontal-Spool-Holder/.metadata.yml b/printer_mods/BladeScraper-Designs/Horizontal-Spool-Holder/.metadata.yml index a2b794baf..f0cf9ee15 100644 --- a/printer_mods/BladeScraper-Designs/Horizontal-Spool-Holder/.metadata.yml +++ b/printer_mods/BladeScraper-Designs/Horizontal-Spool-Holder/.metadata.yml @@ -8,4 +8,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- Holder.stl title: Horizontal Spool Holder diff --git a/printer_mods/BladeScraper-Designs/Microswitch_Pod_With_Conector/.metadata.yml b/printer_mods/BladeScraper-Designs/Microswitch_Pod_With_Conector/.metadata.yml index e01dd9ce6..4c60780a1 100644 --- a/printer_mods/BladeScraper-Designs/Microswitch_Pod_With_Conector/.metadata.yml +++ b/printer_mods/BladeScraper-Designs/Microswitch_Pod_With_Conector/.metadata.yml @@ -5,4 +5,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- Microswitch_Pod_Connector.stl title: Microswitch Pod With Connector diff --git a/printer_mods/Blamm/lrs-100/.metadata.yml b/printer_mods/Blamm/lrs-100/.metadata.yml index 7c81c4205..4f906ac38 100644 --- a/printer_mods/Blamm/lrs-100/.metadata.yml +++ b/printer_mods/Blamm/lrs-100/.metadata.yml @@ -6,4 +6,6 @@ printer_compatibility: - V1.8 - V2.4 - VT +stl: +- LRS-100-bracket.stl title: LRS-100 DIN mount diff --git a/printer_mods/BlueBear/Bowden_Fence/.metadata.yml b/printer_mods/BlueBear/Bowden_Fence/.metadata.yml index 923276c35..c0597be75 100644 --- a/printer_mods/BlueBear/Bowden_Fence/.metadata.yml +++ b/printer_mods/BlueBear/Bowden_Fence/.metadata.yml @@ -2,12 +2,16 @@ cad: - 1515_SnapIn_LDO.step - 1515_SnapIn_Makerbeam.step - BowdenFence.step -description: A little "fence" to hold the tubes away from the belts. +description: A little "fence" to hold the tubes away from the belts. images: -- images/image01.jpg -- images/image02.jpg +- images/image01.jpg +- images/image02.jpg - images/image03.jpg mod_version: 1 printer_compatibility: - V0.2 +stl: +- 1515_SnapIn_LDO.stl +- 1515_SnapIn_Makerbeam.stl +- BowdenFence.stl title: Bowden Fence diff --git a/printer_mods/BlueBear/Deck_Panel_Backpack/.metadata.yml b/printer_mods/BlueBear/Deck_Panel_Backpack/.metadata.yml index 2f9af1084..177637326 100644 --- a/printer_mods/BlueBear/Deck_Panel_Backpack/.metadata.yml +++ b/printer_mods/BlueBear/Deck_Panel_Backpack/.metadata.yml @@ -8,4 +8,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Deck_Panel_Backpack.stl title: Deck Panel Backpack diff --git a/printer_mods/BlueBear/Wago_221_mount/.metadata.yml b/printer_mods/BlueBear/Wago_221_mount/.metadata.yml index 839ea2f09..02b50f892 100644 --- a/printer_mods/BlueBear/Wago_221_mount/.metadata.yml +++ b/printer_mods/BlueBear/Wago_221_mount/.metadata.yml @@ -15,4 +15,11 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- 1515_SnapIn_LDO.stl +- 1515_SnapIn_Makerbeam.stl +- WAGO_221-412_3x2-mount.stl +- WAGO_221-412_3x2-mount_screw.stl +- WAGO_221-412_5x2-mount.stl +- WAGO_221-413_3x3-mount-screw.stl title: Clippable Wago 221 Mounts diff --git a/printer_mods/BlueBear/Ziptie_Mount/.metadata.yml b/printer_mods/BlueBear/Ziptie_Mount/.metadata.yml index 0b0bd5707..e6d098948 100644 --- a/printer_mods/BlueBear/Ziptie_Mount/.metadata.yml +++ b/printer_mods/BlueBear/Ziptie_Mount/.metadata.yml @@ -9,4 +9,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- 1515_SnapIn_ZipTie_LDO.stl +- 1515_SnapIn_ZipTie_Makerbeam.stl title: Ziptie Mount diff --git a/printer_mods/Boingomw/Wago_mount/.metadata.yml b/printer_mods/Boingomw/Wago_mount/.metadata.yml index fd215c5df..bbd57acf4 100644 --- a/printer_mods/Boingomw/Wago_mount/.metadata.yml +++ b/printer_mods/Boingomw/Wago_mount/.metadata.yml @@ -8,4 +8,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- stl/2020-Wago_221-412_tray-5x2.stl title: Wago mount diff --git a/printer_mods/Bondtech/Mini-After-LGX-Lite/.metadata.yml b/printer_mods/Bondtech/Mini-After-LGX-Lite/.metadata.yml index 177ccf249..adba9fac3 100644 --- a/printer_mods/Bondtech/Mini-After-LGX-Lite/.metadata.yml +++ b/printer_mods/Bondtech/Mini-After-LGX-Lite/.metadata.yml @@ -17,4 +17,32 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/Mini-After-LGX-lite/cowling_universal.stl +- STL/Mini-After-LGX-lite/cowling_universal_sls.stl +- STL/Mini-After-LGX-lite/hotend_mount_copperhead_screw_mount_3007_fan.stl +- STL/Mini-After-LGX-lite/hotend_mount_copperhead_screw_mount_3010_fan.stl +- STL/Mini-After-LGX-lite/hotend_mount_dragonfly_3007_fan.stl +- STL/Mini-After-LGX-lite/hotend_mount_dragonfly_3010_fan.stl +- STL/Mini-After-LGX-lite/hotend_mount_dragon_3007_fan.stl +- STL/Mini-After-LGX-lite/hotend_mount_mosquito_3007_fan.stl +- STL/Mini-After-LGX-lite/hotend_mount_mosquito_3010_fan.stl +- STL/Mini-After-LGX-lite/hotend_mount_revo-voron_3007_fan.stl +- STL/Mini-After-LGX-lite/hotend_mount_revo-voron_3010_fan.stl +- STL/Mini-After-LGX-lite/klicky.stl +- STL/Mini-After-LGX-lite/strain_relief.stl +- STL/Mini-After-LGX-lite/strain_relief_spacer_x2.stl +- STL/Mini-After-LGX-lite/strain_relief_spacer_x2_trisert-136.stl +- STL/Mini-After-LGX-lite/x-carriage_sls.stl +- STL/Mini-After-LGX-lite/x-carriage_sls_trisert-136.stl +- STL/Mini-After-LGX-lite/x-carriage_supported.stl +- STL/Tools/adafruit_adxl345_spacer.stl +- STL/Tools/adxl345_generic_mount.stl +- STL/Tools/ptfe_cutting_jig.stl +- STL/Z_Bed_adjustable_Y_offset/Front_Bed_Mount.stl +- STL/Z_Bed_adjustable_Y_offset/Front_Bed_Mount_lgx_lite_spacer.stl +- STL/Z_Bed_adjustable_Y_offset/Rear_Bed_Mount_Left.stl +- STL/Z_Bed_adjustable_Y_offset/Rear_Bed_Mount_Left_lgx_lite_spacer.stl +- STL/Z_Bed_adjustable_Y_offset/Rear_Bed_Mount_Right.stl +- STL/Z_Bed_adjustable_Y_offset/Rear_Bed_Mount_Right_lgx_lite_spacer.stl title: Mini-After-LGX-Lite diff --git a/printer_mods/ByteChild/2_Channel_Relay_DIN_Rail_Bracket/.metadata.yml b/printer_mods/ByteChild/2_Channel_Relay_DIN_Rail_Bracket/.metadata.yml index be10ad52a..11bd825c0 100644 --- a/printer_mods/ByteChild/2_Channel_Relay_DIN_Rail_Bracket/.metadata.yml +++ b/printer_mods/ByteChild/2_Channel_Relay_DIN_Rail_Bracket/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- Relay_Bracket.stl title: 2-Channel Relay DIN Rail Bracket diff --git a/printer_mods/ByteChild/ESP32_DIN_Rail_Bracket/.metadata.yml b/printer_mods/ByteChild/ESP32_DIN_Rail_Bracket/.metadata.yml index 989fa18fe..88d756b47 100644 --- a/printer_mods/ByteChild/ESP32_DIN_Rail_Bracket/.metadata.yml +++ b/printer_mods/ByteChild/ESP32_DIN_Rail_Bracket/.metadata.yml @@ -6,4 +6,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- ESP32_Bracket.stl title: ESP32 DIN Rail Bracket diff --git a/printer_mods/CannedBass/PITFT50_45_degree_mount/.metadata.yml b/printer_mods/CannedBass/PITFT50_45_degree_mount/.metadata.yml index 8a86028f6..91b9ffca0 100644 --- a/printer_mods/CannedBass/PITFT50_45_degree_mount/.metadata.yml +++ b/printer_mods/CannedBass/PITFT50_45_degree_mount/.metadata.yml @@ -8,4 +8,6 @@ mod_version: 1 printer_compatibility: - V2.4 - VT +stl: +- STL/PITFT50_45_degree_mount.stl title: PITFT50 45-degree mount diff --git a/printer_mods/CannedBass/Trident_Bed_Fans/.metadata.yml b/printer_mods/CannedBass/Trident_Bed_Fans/.metadata.yml index ad2225b26..135fee34b 100644 --- a/printer_mods/CannedBass/Trident_Bed_Fans/.metadata.yml +++ b/printer_mods/CannedBass/Trident_Bed_Fans/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - VT +stl: +- STL/Mounting_Plate.stl title: Trident Bed Fans diff --git a/printer_mods/Ch4rlesB/V0_Handles_Slim/.metadata.yml b/printer_mods/Ch4rlesB/V0_Handles_Slim/.metadata.yml index f594ca23f..4948c9243 100644 --- a/printer_mods/Ch4rlesB/V0_Handles_Slim/.metadata.yml +++ b/printer_mods/Ch4rlesB/V0_Handles_Slim/.metadata.yml @@ -7,4 +7,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- V0_Handles_Slim_2.5_Panel_x2.stl +- V0_Handles_Slim_3_Panel_x2.stl title: V0 Handles Slim diff --git a/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/.metadata.yml b/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/.metadata.yml index f758a98ec..5cdbac741 100644 --- a/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/.metadata.yml +++ b/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- z_belt_clipX4.stl title: Z Belt Clip diff --git a/printer_mods/D4rkCelerity/Raspberry_Pi_Zero_Bracket/.metadata.yml b/printer_mods/D4rkCelerity/Raspberry_Pi_Zero_Bracket/.metadata.yml index e99f29d4a..05b055028 100644 --- a/printer_mods/D4rkCelerity/Raspberry_Pi_Zero_Bracket/.metadata.yml +++ b/printer_mods/D4rkCelerity/Raspberry_Pi_Zero_Bracket/.metadata.yml @@ -8,4 +8,6 @@ printer_compatibility: - V1.8 - V2.4 - VT +stl: +- STL/raspberrypi_zero_bracket.stl title: Raspberry Pi Zero Bracket diff --git a/printer_mods/DC67/plug_panel_schaffner/.metadata.yml b/printer_mods/DC67/plug_panel_schaffner/.metadata.yml index afcff03b6..b01927403 100644 --- a/printer_mods/DC67/plug_panel_schaffner/.metadata.yml +++ b/printer_mods/DC67/plug_panel_schaffner/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- plug_panel_v6.stl title: Plug Panel Mod for Schaffner FN286-10-06 diff --git a/printer_mods/DaGlo/Voron_V0_Duet_2_WiFi_Mounting_Brackets/.metadata.yml b/printer_mods/DaGlo/Voron_V0_Duet_2_WiFi_Mounting_Brackets/.metadata.yml index a5aba8dd4..807eb5f71 100644 --- a/printer_mods/DaGlo/Voron_V0_Duet_2_WiFi_Mounting_Brackets/.metadata.yml +++ b/printer_mods/DaGlo/Voron_V0_Duet_2_WiFi_Mounting_Brackets/.metadata.yml @@ -7,4 +7,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Duet2Wifi_Mounting_Bracket.stl +- Duet2Wifi_Mounting_Bracket_with_RPi.stl title: V0.1 Duet 2 Wifi mounting brackets diff --git a/printer_mods/DaGlo/Voron_V0_MW_PS_Bracket/.metadata.yml b/printer_mods/DaGlo/Voron_V0_MW_PS_Bracket/.metadata.yml index b2f8c414f..485f0f653 100644 --- a/printer_mods/DaGlo/Voron_V0_MW_PS_Bracket/.metadata.yml +++ b/printer_mods/DaGlo/Voron_V0_MW_PS_Bracket/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Voron_V0_MW_PS_Bracket.stl title: Voron V0 Mean Well power supply bracket (Funssor Kit) diff --git a/printer_mods/DaGlo/Voron_V0_SSR_Mount/.metadata.yml b/printer_mods/DaGlo/Voron_V0_SSR_Mount/.metadata.yml index 93716076b..dab8731f2 100644 --- a/printer_mods/DaGlo/Voron_V0_SSR_Mount/.metadata.yml +++ b/printer_mods/DaGlo/Voron_V0_SSR_Mount/.metadata.yml @@ -9,4 +9,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Voron_V0_SSR_Mount.stl title: Voron V0 SSR Mount diff --git a/printer_mods/DaGrooch13/Tophat_Exhaust_Filter/.metadata.yml b/printer_mods/DaGrooch13/Tophat_Exhaust_Filter/.metadata.yml index c54ad77ff..55153fcd7 100644 --- a/printer_mods/DaGrooch13/Tophat_Exhaust_Filter/.metadata.yml +++ b/printer_mods/DaGrooch13/Tophat_Exhaust_Filter/.metadata.yml @@ -11,4 +11,12 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Fan_Cover_Left_Hole.stl +- Fan_Cover_Right_Hole.stl +- Middle_Charcoal_Chamber.stl +- Middle_Panel_Grill.stl +- Panel_Left_Side.stl +- Panel_Right_Side.stl +- Roomba_HEPA_Cover.stl title: Tophat Exhaust Filter V0 diff --git a/printer_mods/DaStivi/the_Cephalopods_limb/.metadata.yml b/printer_mods/DaStivi/the_Cephalopods_limb/.metadata.yml index 28de1cafc..fab6ecc18 100644 --- a/printer_mods/DaStivi/the_Cephalopods_limb/.metadata.yml +++ b/printer_mods/DaStivi/the_Cephalopods_limb/.metadata.yml @@ -12,4 +12,7 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STL/Octopus_limbs_bracket.stl +- STL/Simple_Octopus_Bracket_v2.stl title: The Cephalopod limb (BTT Octopus PRO Bracket(s)) diff --git a/printer_mods/Dan88/V0skirt/.metadata.yml b/printer_mods/Dan88/V0skirt/.metadata.yml index 7d785d440..311e26a8e 100644 --- a/printer_mods/Dan88/V0skirt/.metadata.yml +++ b/printer_mods/Dan88/V0skirt/.metadata.yml @@ -5,4 +5,6 @@ images: [] mod_version: 1 printer_compatibility: - V0.2 +stl: +- V0_skirts_onepart.stl title: V0 one-part Skirts diff --git a/printer_mods/Daten/Voron_2.4_Revo_Nozzle_Holder/.metadata.yml b/printer_mods/Daten/Voron_2.4_Revo_Nozzle_Holder/.metadata.yml index cb7a104d0..7687ec226 100644 --- a/printer_mods/Daten/Voron_2.4_Revo_Nozzle_Holder/.metadata.yml +++ b/printer_mods/Daten/Voron_2.4_Revo_Nozzle_Holder/.metadata.yml @@ -10,4 +10,14 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/side_skirt_a_250_revo_R1.stl +- STL/side_skirt_a_250_revo_R2.stl +- STL/side_skirt_a_300_revo_R1.stl +- STL/side_skirt_a_300_revo_R2.stl +- STL/side_skirt_a_350_revo_R1.stl +- STL/side_skirt_a_350_revo_R2.stl +- STL/[a]_side_skirt_a_250_insert.stl +- STL/[a]_side_skirt_a_300_insert.stl +- STL/[a]_side_skirt_a_350_insert.stl title: Revo hotend skirt case diff --git a/printer_mods/DerekBackus/LED_Holder/.metadata.yml b/printer_mods/DerekBackus/LED_Holder/.metadata.yml index 97c53ef37..476c0c8dd 100644 --- a/printer_mods/DerekBackus/LED_Holder/.metadata.yml +++ b/printer_mods/DerekBackus/LED_Holder/.metadata.yml @@ -7,4 +7,6 @@ images: - Images/LED_Holder_Side_View.png mod_version: 1 printer_compatibility: [] +stl: +- LED_Holder_340mm.stl title: LED Strip Holder diff --git a/printer_mods/DerekBackus/Right_Skirt_Switch/.metadata.yml b/printer_mods/DerekBackus/Right_Skirt_Switch/.metadata.yml index c2c89b93a..ec791102b 100644 --- a/printer_mods/DerekBackus/Right_Skirt_Switch/.metadata.yml +++ b/printer_mods/DerekBackus/Right_Skirt_Switch/.metadata.yml @@ -7,4 +7,7 @@ images: - Images/Filter_ISO_View.png mod_version: 1 printer_compatibility: [] +stl: +- Filtered_Main_Skirt.stl +- Side_Skirt_A_Switch.stl title: Trident Right Skirt Switch diff --git a/printer_mods/Derpimus/Block_handle_v0.1/.metadata.yml b/printer_mods/Derpimus/Block_handle_v0.1/.metadata.yml index ede08aef7..f23a6b49b 100644 --- a/printer_mods/Derpimus/Block_handle_v0.1/.metadata.yml +++ b/printer_mods/Derpimus/Block_handle_v0.1/.metadata.yml @@ -6,4 +6,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- block_handlev0.1.stl title: V0.1 Block Handle diff --git a/printer_mods/DorjeDorf/Duet_3_3HC_Din_Bracket/.metadata.yml b/printer_mods/DorjeDorf/Duet_3_3HC_Din_Bracket/.metadata.yml index 5b4aa05f9..f46406b7c 100644 --- a/printer_mods/DorjeDorf/Duet_3_3HC_Din_Bracket/.metadata.yml +++ b/printer_mods/DorjeDorf/Duet_3_3HC_Din_Bracket/.metadata.yml @@ -4,4 +4,6 @@ images: [] mod_version: 1 printer_compatibility: - V2.4 +stl: +- Duet_3_3HC_Bracket.stl title: Duet 3 3HC Din Bracket diff --git a/printer_mods/DorjeDorf/Duet_3_6HC_Din_Bracket/.metadata.yml b/printer_mods/DorjeDorf/Duet_3_6HC_Din_Bracket/.metadata.yml index 854755945..4369d6786 100644 --- a/printer_mods/DorjeDorf/Duet_3_6HC_Din_Bracket/.metadata.yml +++ b/printer_mods/DorjeDorf/Duet_3_6HC_Din_Bracket/.metadata.yml @@ -5,4 +5,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- Duet_3_6HC_Bracket.stl title: Duet 3 6HC Din Bracket diff --git a/printer_mods/Dr-Info/V2.4r2_Z-Drive_Motor_Tensioner_Mod_Rear_Skirts/.metadata.yml b/printer_mods/Dr-Info/V2.4r2_Z-Drive_Motor_Tensioner_Mod_Rear_Skirts/.metadata.yml index 723398800..b5e654ffe 100644 --- a/printer_mods/Dr-Info/V2.4r2_Z-Drive_Motor_Tensioner_Mod_Rear_Skirts/.metadata.yml +++ b/printer_mods/Dr-Info/V2.4r2_Z-Drive_Motor_Tensioner_Mod_Rear_Skirts/.metadata.yml @@ -1,17 +1,23 @@ cad: -- CAD/Filtered_Inlet_Skirt_Mod.f3d -- CAD/Filtered_Inlet_Skirt_Mod.step -- CAD/IEC-GS_1.2mm_Mod.step -- CAD/IEC-GS_1mm_Mod.step -- CAD/IEC-GS_Mod.f3d -- CAD/Keystone_Skirt_Mod.f3d +- CAD/Filtered_Inlet_Skirt_Mod.f3d +- CAD/Filtered_Inlet_Skirt_Mod.step +- CAD/IEC-GS_1.2mm_Mod.step +- CAD/IEC-GS_1mm_Mod.step +- CAD/IEC-GS_Mod.f3d +- CAD/Keystone_Skirt_Mod.f3d - CAD/Keystone_Skirt_Mod.step -description: This mod enables the you to utilize the rear skirts, power and keystone, in your V2.4R2 +description: This mod enables the you to utilize the rear skirts, power and keystone, + in your V2.4R2 images: -- Images/Filtered_Inlet_Skirt_Mod.JPG -- Images/IEC-GS_Skirt_Mod.JPG +- Images/Filtered_Inlet_Skirt_Mod.JPG +- Images/IEC-GS_Skirt_Mod.JPG - Images/Keystone_Skirt_Mod.JPG mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/Filtered_Inlet_Skirt_Mod.stl +- STL/IEC-GS_1.2mm_Mod.stl +- STL/IEC-GS_1mm_Mod.stl +- STL/Keystone_Skirt_Mod.stl title: V2.4 Rear Skirt Mod for Z-Drive Motor Tensioner Mod diff --git a/printer_mods/Dr-Info/corner_cable_cover_with_drop_down_holes/.metadata.yml b/printer_mods/Dr-Info/corner_cable_cover_with_drop_down_holes/.metadata.yml index 38885f430..93edc0ea4 100644 --- a/printer_mods/Dr-Info/corner_cable_cover_with_drop_down_holes/.metadata.yml +++ b/printer_mods/Dr-Info/corner_cable_cover_with_drop_down_holes/.metadata.yml @@ -19,4 +19,9 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/LDO_LED_PCB_spacer_narrow_rev01.stl +- STL/top_corner_cable_cover_with_drop_holes_LDO_PCB_splitter_left_rev01.stl +- STL/top_corner_cable_cover_with_drop_holes_LDO_PCB_splitter_right_rev01.stl +- STL/top_corner_cable_cover_with_drop_holes_rev02.stl title: Corner Cable Cover with Drop Holes diff --git a/printer_mods/DrGhetto/GhettoPanels/.metadata.yml b/printer_mods/DrGhetto/GhettoPanels/.metadata.yml index 062d552c6..f1d20d4f9 100644 --- a/printer_mods/DrGhetto/GhettoPanels/.metadata.yml +++ b/printer_mods/DrGhetto/GhettoPanels/.metadata.yml @@ -6,4 +6,13 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- foot_filament_guide.stl +- hatch_rear.stl +- panel_hinge_bottom.stl +- panel_hinge_top.stl +- panel_left.stl +- panel_rear.stl +- panel_right.stl +- panel_right_iec.stl title: Ghetto Panels diff --git a/printer_mods/ElPoPo/RemovableDoors/.metadata.yml b/printer_mods/ElPoPo/RemovableDoors/.metadata.yml index 44e26d894..95024ea5a 100644 --- a/printer_mods/ElPoPo/RemovableDoors/.metadata.yml +++ b/printer_mods/ElPoPo/RemovableDoors/.metadata.yml @@ -7,4 +7,18 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/Backplate_x4.stl +- STL/Hinge_x4.stl +- STL/latch_x2.stl +- STL/Left_Leaf_VHB_With_Accent_x2.stl +- STL/Left_Leaf_VHB_x2.stl +- STL/Left_Leaf_With_Accent_x2.stl +- STL/Left_Leaf_x2.stl +- STL/mod_5x3_handle_a_small.stl +- STL/mod_6x3_handle_a_small.stl +- STL/Right_Leaf_VHB_With_Accent_x2.stl +- STL/Right_Leaf_VHB_x2.stl +- STL/Right_Leaf_With_Accent_x2.stl +- STL/Right_Leaf_x2.stl title: Removable Doors diff --git a/printer_mods/Electroleon/U2C_Mounting/.metadata.yml b/printer_mods/Electroleon/U2C_Mounting/.metadata.yml index 38b3638c0..2268a5816 100644 --- a/printer_mods/Electroleon/U2C_Mounting/.metadata.yml +++ b/printer_mods/Electroleon/U2C_Mounting/.metadata.yml @@ -9,4 +9,6 @@ printer_compatibility: - V1.8 - V2.4 - VT +stl: +- STLs/U2C_Mounting_Universal.STL title: U2C Mounting diff --git a/printer_mods/Ellis/15x15_Drag_Chain_End/.metadata.yml b/printer_mods/Ellis/15x15_Drag_Chain_End/.metadata.yml index b1a8994cb..0d19b8755 100644 --- a/printer_mods/Ellis/15x15_Drag_Chain_End/.metadata.yml +++ b/printer_mods/Ellis/15x15_Drag_Chain_End/.metadata.yml @@ -6,4 +6,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/15x15_Drag_Chain_End.stl title: 15x15 Drag Chain End diff --git a/printer_mods/Ellis/Badge_Retractor_Mount/.metadata.yml b/printer_mods/Ellis/Badge_Retractor_Mount/.metadata.yml index 6df995741..d6bf4be1a 100644 --- a/printer_mods/Ellis/Badge_Retractor_Mount/.metadata.yml +++ b/printer_mods/Ellis/Badge_Retractor_Mount/.metadata.yml @@ -8,4 +8,9 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/RetractorMount.stl +- STL/RetractorMount15deg.stl +- STL/RetractorMount25deg.stl +- STL/RetractorMount35deg.stl title: Badge Retractor Mount diff --git a/printer_mods/Ellis/Bed_Fans/.metadata.yml b/printer_mods/Ellis/Bed_Fans/.metadata.yml index 3d778f16b..88ccba3ce 100644 --- a/printer_mods/Ellis/Bed_Fans/.metadata.yml +++ b/printer_mods/Ellis/Bed_Fans/.metadata.yml @@ -10,4 +10,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- 5015_Bed_Fan_Mount/5015_Bed_Fan_Mount.stl title: Bed Fans diff --git a/printer_mods/Ellis/Short_Z_Joints/.metadata.yml b/printer_mods/Ellis/Short_Z_Joints/.metadata.yml index fb3a15c79..8ee1a931f 100644 --- a/printer_mods/Ellis/Short_Z_Joints/.metadata.yml +++ b/printer_mods/Ellis/Short_Z_Joints/.metadata.yml @@ -7,4 +7,8 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/Z_Bearing_Block_Bottom.stl +- STL/Z_Bearing_Block_Top.stl +- STL/Z_Belt_Clamp_Lower.stl title: Short Z Joints diff --git a/printer_mods/Ellis/Single_MGN9H_Carriage/.metadata.yml b/printer_mods/Ellis/Single_MGN9H_Carriage/.metadata.yml index fe7a5d906..8b4be2a84 100644 --- a/printer_mods/Ellis/Single_MGN9H_Carriage/.metadata.yml +++ b/printer_mods/Ellis/Single_MGN9H_Carriage/.metadata.yml @@ -12,4 +12,9 @@ mod_version: 1 printer_compatibility: - V1.8 - V2.4 +stl: +- Single_MGN9H_Carriage_CW1_Left.stl +- Single_MGN9H_Carriage_CW1_Right.stl +- Single_MGN9H_Carriage_CW2_Left.stl +- Single_MGN9H_Carriage_CW2_Right.stl title: Single MGN9H Carriage diff --git a/printer_mods/EmJay276/stealthburner_dragon_UHF_toolhead/.metadata.yml b/printer_mods/EmJay276/stealthburner_dragon_UHF_toolhead/.metadata.yml index 49376b2d3..7f63185f0 100644 --- a/printer_mods/EmJay276/stealthburner_dragon_UHF_toolhead/.metadata.yml +++ b/printer_mods/EmJay276/stealthburner_dragon_UHF_toolhead/.metadata.yml @@ -1,20 +1,9 @@ ---- -# The title of your mod. Choose a short and descriptive name -title: Stealthburner Phaetus Dragon UHF and Phaetus Dragon UHF mini -# A short description of your mod. Try to describe your mod with 1-2 short sentences -description: This mod adds a tool cartridge for the Phaetus Dragon UHF and Phaetus Dragon UHF mini hotend -# Mod version: Set this to 1 when you are submitting a new mod. When you make changes to your mod, you may increment this number -mod_version: 1 -# You may add your discord username here so people can contact you about your mod -discord_username: emjay276 -# The CAD files for your mod. Please provide them as a list. -# Note that each mod must include at least one CAD file. cad: - CAD/Stealthburner_Printhead_Dragon_UHF.stp - CAD/Stealthburner_Printhead_Dragon_UHF_mini.stp -# The image files provided with your mod. These may be instructions you use in your README.md file, or other additional pictures. -# **Note that the first image specified here will be used as cover image on mods.vorondesign.com** -# All paths are relative to this .metadata.yml file. +description: This mod adds a tool cartridge for the Phaetus Dragon UHF and Phaetus + Dragon UHF mini hotend +discord_username: emjay276 images: - images/back.png - images/back_uhf.png @@ -25,10 +14,14 @@ images: - images/front_uhf.png - images/front_uhf_mini.png - images/hotend_installation.jpg -# Printer compatibility. Please specify all compatible printers as a list. The following values are accepted: -# "V0", "V0.1", "V0.2", "V0.2r1", "V1", "V1.6", "V1.8", "V1.8r1", "V2", "V2.1", "V2.2", "V2.4", "V2.4r1", "V2.4r2", "VSW", "VT", "VTr1", "VL" -# Please only specify printers that you have either tested your mod on yourself, or that someone else has tested for you. If you are unsure whether your -# mod is compatible with a certain printer, don't list it here! +mod_version: 1 printer_compatibility: - VT -- V2.4 \ No newline at end of file +- V2.4 +stl: +- STL/UHF/SB_Dragon_UHF_TH_Front.stl +- STL/UHF/SB_Dragon_UHF_TH_Rear.stl +- STL/UHF/[a]_Stealthburner_Body_Dragon_UHF.stl +- STL/UHF_mini/SB_Dragon_UHF_mini_TH_Front.stl +- STL/UHF_mini/SB_Dragon_UHF_mini_TH_Rear.stl +title: Stealthburner Phaetus Dragon UHF and Phaetus Dragon UHF mini diff --git a/printer_mods/Empusas/BTT_Filament_Motion_Sensor_Mount/.metadata.yml b/printer_mods/Empusas/BTT_Filament_Motion_Sensor_Mount/.metadata.yml index 7f0513b5f..0ba6862d7 100644 --- a/printer_mods/Empusas/BTT_Filament_Motion_Sensor_Mount/.metadata.yml +++ b/printer_mods/Empusas/BTT_Filament_Motion_Sensor_Mount/.metadata.yml @@ -14,4 +14,7 @@ printer_compatibility: - V1.8 - V2.4 - VSW +stl: +- BTT_Sensor_Mount_A.stl +- BTT_Sensor_Mount_B.stl title: Mounts for BTT Filament Motion Sensor diff --git a/printer_mods/Empusas/PowerSkirt_FN284-10-06/.metadata.yml b/printer_mods/Empusas/PowerSkirt_FN284-10-06/.metadata.yml index d1203d61a..2026c6d8a 100644 --- a/printer_mods/Empusas/PowerSkirt_FN284-10-06/.metadata.yml +++ b/printer_mods/Empusas/PowerSkirt_FN284-10-06/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- PowerSkirt_FN284-10-06.stl title: Power Skirt 2.x FN284-10-06 diff --git a/printer_mods/Empusas/Terminal_Blocks_NC933_SPL-62/.metadata.yml b/printer_mods/Empusas/Terminal_Blocks_NC933_SPL-62/.metadata.yml index 5678d23c9..5ecc57ce2 100644 --- a/printer_mods/Empusas/Terminal_Blocks_NC933_SPL-62/.metadata.yml +++ b/printer_mods/Empusas/Terminal_Blocks_NC933_SPL-62/.metadata.yml @@ -7,4 +7,7 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- NC-933_Clip.stl +- SPL-62_Clip.stl title: Mounts for Terminal Blocks NC933 SPL-62 diff --git a/printer_mods/Ferdi360/2.4_Bedfan_Backplates/.metadata.yml b/printer_mods/Ferdi360/2.4_Bedfan_Backplates/.metadata.yml index 5a212586b..930427775 100644 --- a/printer_mods/Ferdi360/2.4_Bedfan_Backplates/.metadata.yml +++ b/printer_mods/Ferdi360/2.4_Bedfan_Backplates/.metadata.yml @@ -1,27 +1,19 @@ ---- -# The title of your mod. Choose a short and descriptive name -title: 2.4 Bedfan Backplates -# A short description of your mod. Try to describe your mod with 1-2 short sentences -description: Backplates for your Voron 2.4 that block hot air out of your bedfans from blowing onto your ACM panels to (slightly) improve airflow and temps. Also a nice way to showoff Voron branding and the serial of your printer. -# Mod version: Set this to 1 when you are submitting a new mod. When you make changes to your mod, you may increment this number -mod_version: 1 -# You may add your discord username here so people can contact you about your mod -discord_username: ferdimac -# The CAD files for your mod. Please provide them as a list. -# Note that each mod must include at least one CAD file. cad: - CAD/2.4_Backplates_v1.f3d - CAD/2.4_Backplates_v1.step -# The image files provided with your mod. These may be instructions you use in your README.md file, or other additional pictures. -# **Note that the first image specified here will be used as cover image on mods.vorondesign.com** -# All paths are relative to this .metadata.yml file. +description: Backplates for your Voron 2.4 that block hot air out of your bedfans + from blowing onto your ACM panels to (slightly) improve airflow and temps. Also + a nice way to showoff Voron branding and the serial of your printer. +discord_username: ferdimac images: - Images/2.4_Backplates.PNG - Images/2.4_Backplates_1.jpg - Images/2.4_Backplates_2.jpg -# Printer compatibility. Please specify all compatible printers as a list. The following values are accepted: -# "V0", "V0.1", "V0.2", "V0.2r1", "V1", "V1.6", "V1.8", "V1.8r1", "V2", "V2.1", "V2.2", "V2.4", "V2.4r1", "V2.4r2", "VSW", "VT", "VTr1", "VL" -# Please only specify printers that you have either tested your mod on yourself, or that someone else has tested for you. If you are unsure whether your -# mod is compatible with a certain printer, don't list it here! +mod_version: 1 printer_compatibility: - V2.4r2 +stl: +- STL/2.4_Backplate_250.stl +- STL/2.4_Backplate_300.stl +- STL/2.4_Backplate_350.stl +title: 2.4 Bedfan Backplates diff --git a/printer_mods/Fiction/C270_mount/.metadata.yml b/printer_mods/Fiction/C270_mount/.metadata.yml index 40186ffa1..9ab469ba4 100644 --- a/printer_mods/Fiction/C270_mount/.metadata.yml +++ b/printer_mods/Fiction/C270_mount/.metadata.yml @@ -10,4 +10,7 @@ mod_version: 1 printer_compatibility: - V2.4 - VT +stl: +- STL/C270_focus_wheel.stl +- STL/C270_mount.stl title: C270 mount diff --git a/printer_mods/Fiction/Crossrail/.metadata.yml b/printer_mods/Fiction/Crossrail/.metadata.yml index cb896fa05..8cba1b007 100644 --- a/printer_mods/Fiction/Crossrail/.metadata.yml +++ b/printer_mods/Fiction/Crossrail/.metadata.yml @@ -16,4 +16,7 @@ mod_version: 1 printer_compatibility: - V2.4 - VT +stl: +- STLs/crossrail.stl +- STLs/crossrail_slot.stl title: Crossrail diff --git a/printer_mods/Fiction/Exhaust_cover/.metadata.yml b/printer_mods/Fiction/Exhaust_cover/.metadata.yml index 34d1346e6..750b62cda 100644 --- a/printer_mods/Fiction/Exhaust_cover/.metadata.yml +++ b/printer_mods/Fiction/Exhaust_cover/.metadata.yml @@ -11,4 +11,6 @@ mod_version: 1 printer_compatibility: - V2.4 - VT +stl: +- STLs/exhaust_cover.stl title: Exhaust_cover diff --git a/printer_mods/Fiction/Exhaust_cover_SFS/.metadata.yml b/printer_mods/Fiction/Exhaust_cover_SFS/.metadata.yml index 6c1b925ca..93270431f 100644 --- a/printer_mods/Fiction/Exhaust_cover_SFS/.metadata.yml +++ b/printer_mods/Fiction/Exhaust_cover_SFS/.metadata.yml @@ -14,4 +14,7 @@ mod_version: 1 printer_compatibility: - V2.4 - VT +stl: +- STLs/Exhaust_cover_SFS_clamp.stl +- STLs/Exhaust_cover_SFS_v1.01.stl title: Exhaust_cover_SFS diff --git a/printer_mods/Fiction/LGX_Lite_toolhead_PCB_mount/.metadata.yml b/printer_mods/Fiction/LGX_Lite_toolhead_PCB_mount/.metadata.yml index ba47cf0a0..05656d6d7 100644 --- a/printer_mods/Fiction/LGX_Lite_toolhead_PCB_mount/.metadata.yml +++ b/printer_mods/Fiction/LGX_Lite_toolhead_PCB_mount/.metadata.yml @@ -14,4 +14,7 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STLs/LGX_Lite_toolhead_PCB_mount.stl +- STLs/LGX_Lite_toolhead_PCB_spacer.stl title: LGX Lite toolhead PCB mount diff --git a/printer_mods/FreeformFez/FilteredPower/.metadata.yml b/printer_mods/FreeformFez/FilteredPower/.metadata.yml index 022bb0253..3f8f03fc7 100644 --- a/printer_mods/FreeformFez/FilteredPower/.metadata.yml +++ b/printer_mods/FreeformFez/FilteredPower/.metadata.yml @@ -7,4 +7,7 @@ images: mod_version: 1 printer_compatibility: - V1.8 +stl: +- skirt_250_filtered_power.stl +- skirt_300_filtered_power.stl title: V1.8 Filtered Power Inlet diff --git a/printer_mods/GSL12/pocketwatch_nema17/.metadata.yml b/printer_mods/GSL12/pocketwatch_nema17/.metadata.yml index 7920c5af4..2e88d4fb3 100644 --- a/printer_mods/GSL12/pocketwatch_nema17/.metadata.yml +++ b/printer_mods/GSL12/pocketwatch_nema17/.metadata.yml @@ -5,4 +5,8 @@ images: - media/pw_nema17.jpg mod_version: 1 printer_compatibility: [] +stl: +- STL/VORON_Pocketwatch_Nema17_parts_Main_Body.stl +- STL/VORON_Pocketwatch_Nema17_parts_Motor_Plate.stl +- STL/VORON_Pocketwatch_Nema17_parts_mounting_bracket.stl title: Pocketwatch Nema 17 diff --git a/printer_mods/GadgetAngel/Bed_Support_Alignment_Tools/.metadata.yml b/printer_mods/GadgetAngel/Bed_Support_Alignment_Tools/.metadata.yml index e0f4dde48..7f80c7e91 100644 --- a/printer_mods/GadgetAngel/Bed_Support_Alignment_Tools/.metadata.yml +++ b/printer_mods/GadgetAngel/Bed_Support_Alignment_Tools/.metadata.yml @@ -11,4 +11,9 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- Bed_Support_Alignment_Tool_250_Corners_x4.stl +- Bed_Support_Alignment_Tool_300_Corners_x4.stl +- Bed_Support_Alignment_Tool_350_Corners_x4.stl +- Bed_Support_Alignment_Tool_Center_250_300_350_x2.stl title: Bed Support Extrusions Alignment Tools diff --git a/printer_mods/GadgetAngel/Cricut_Voron_Logos/.metadata.yml b/printer_mods/GadgetAngel/Cricut_Voron_Logos/.metadata.yml index a549291ed..e968102bc 100644 --- a/printer_mods/GadgetAngel/Cricut_Voron_Logos/.metadata.yml +++ b/printer_mods/GadgetAngel/Cricut_Voron_Logos/.metadata.yml @@ -113,4 +113,15 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- Voron_Trident/.stl_files/Trident_DLogo.stl +- Voron_Trident/.stl_files/Trident_DLogo_250_deck_Panel.stl +- Voron_Trident/.stl_files/Trident_DLogo_250_Rear_Panel.stl +- Voron_Trident/.stl_files/Trident_DLogo_300_deck_Panel.stl +- Voron_Trident/.stl_files/Trident_DLogo_300_rear_Panel.stl +- Voron_Trident/.stl_files/Trident_DLogo_350_deck_Panel_.stl +- Voron_Trident/.stl_files/Trident_DLogo_350_rear_Panel.stl +- Voron_Trident/.stl_files/Trident_DLogo_Dim_X_216.51_Y_250.00_Z_1.75.stl +- Voron_Trident/.stl_files/Trident_DLogo_Dim_X_259.80_Y_300.00_Z_2.10.stl +- Voron_Trident/.stl_files/Trident_DLogo_Dim_X_303.12_Y_350.00_Z_2.46.stl title: Cricut Voron Logos diff --git a/printer_mods/Galvanic/Bowden_Tube_Guide/.metadata.yml b/printer_mods/Galvanic/Bowden_Tube_Guide/.metadata.yml index 984aea191..823a69e25 100644 --- a/printer_mods/Galvanic/Bowden_Tube_Guide/.metadata.yml +++ b/printer_mods/Galvanic/Bowden_Tube_Guide/.metadata.yml @@ -13,4 +13,8 @@ printer_compatibility: - V1.8 - V2.4 - VT +stl: +- STL/Long_Arm.stl +- STL/Mount.stl +- STL/Short_Arm.stl title: Bowden Tube Guide diff --git a/printer_mods/GiulianoM/FlyF407ZG/.metadata.yml b/printer_mods/GiulianoM/FlyF407ZG/.metadata.yml index 07bef6211..ce495f3bd 100644 --- a/printer_mods/GiulianoM/FlyF407ZG/.metadata.yml +++ b/printer_mods/GiulianoM/FlyF407ZG/.metadata.yml @@ -8,4 +8,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- Fly-F407ZG-Mount-v3.stl title: Fly F407ZG Mount diff --git a/printer_mods/Gizzle/ender-3_pro_switchwire/.metadata.yml b/printer_mods/Gizzle/ender-3_pro_switchwire/.metadata.yml index f6657f143..338064b0a 100644 --- a/printer_mods/Gizzle/ender-3_pro_switchwire/.metadata.yml +++ b/printer_mods/Gizzle/ender-3_pro_switchwire/.metadata.yml @@ -12,4 +12,46 @@ images: mod_version: 1 printer_compatibility: - VSW +stl: +- STL/ELECTRONICS/Enclosure_Bottom_x1.stl +- STL/ELECTRONICS/Enclosure_Lid_x1.stl +- STL/ELECTRONICS/LCD-Case_Arm_x1.stl +- STL/ELECTRONICS/LCD-Case_Back_x1.stl +- STL/ELECTRONICS/LCD-Case_Front_x1.stl +- STL/ELECTRONICS/LRS-350-24_PSU-Cover_x1.stl +- STL/ELECTRONICS/[a]_LCD-Knob_x1.stl +- STL/GANTRY/Keyback-Idler_x1.stl +- STL/GANTRY/Keyback-Mount_Back_x1.stl +- STL/GANTRY/Keyback-Mount_Front_x1.stl +- STL/GANTRY/keybak_gantry_anchor.stl +- STL/GANTRY/Rail_Adapter_x1.stl +- STL/GANTRY/Upper-Block_Left_Top_x1.stl +- STL/GANTRY/Upper-Block_Right_Top_x1.stl +- STL/GANTRY/X-Motor_Holder_x1.stl +- STL/GANTRY/XZ-Block_Left_Back_x1.stl +- STL/GANTRY/XZ-Block_Left_Front_x1.stl +- STL/GANTRY/XZ-Block_Right_Back_x1.stl +- STL/GANTRY/XZ-Block_Right_Front_x1.stl +- STL/GANTRY/x_carriage_frame_left_x1.stl +- STL/GANTRY/x_carriage_frame_right_x1.stl +- STL/GANTRY/Z-Bearing_Block_Chain-Mount_x1.stl +- STL/GANTRY/Z-Bearing_Block_Left_Keybak_x1.stl +- STL/GANTRY/Z-Bearing_Block_Right_x1.stl +- STL/GANTRY/Z-Lower-Chain-Mount.stl +- STL/GANTRY/Z-Motor_Holder_x1.stl +- STL/GANTRY/[a]_Belt-Clip_x2.stl +- STL/GANTRY/[a]_Upper-Block_Left_Base_x1.stl +- STL/GANTRY/[a]_Upper-Block_Right_Base_x1.stl +- STL/GANTRY/[a]_XZ-Cable_Cover_x1.stl +- STL/Y-ASSEMBLY/Endcap_x3.stl +- STL/Y-ASSEMBLY/Y-Belt_Anchor_x1.stl +- STL/Y-ASSEMBLY/Y-Chain_Bed-Mount_x1.stl +- STL/Y-ASSEMBLY/Y-Chain_Frame-Mount_x1.stl +- STL/Y-ASSEMBLY/Y-Idler_Bottom_x1.stl +- STL/Y-ASSEMBLY/Y-Idler_Top_x1.stl +- STL/Y-ASSEMBLY/Y-Motor_Mount_x1.stl +- STL/Y-ASSEMBLY/[a]_Y-Belt_Clamp_x1.stl +- STL/Y-ASSEMBLY/PRO/Y-Idler_Pro_Bottom_x1.stl +- STL/Y-ASSEMBLY/PRO/Y-Idler_Pro_Top_x1.stl +- STL/Y-ASSEMBLY/PRO/Y-Motor_Mount_Pro_x1.stl title: Ender 3 and Ender 3 Pro Switchwire Mod diff --git a/printer_mods/Hobson318/Belt_Tension_Wrench/.metadata.yml b/printer_mods/Hobson318/Belt_Tension_Wrench/.metadata.yml index 8dd743c5c..5578ea3f6 100644 --- a/printer_mods/Hobson318/Belt_Tension_Wrench/.metadata.yml +++ b/printer_mods/Hobson318/Belt_Tension_Wrench/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Belt_Tension_Wrench.stl title: Belt Tension Wrench diff --git a/printer_mods/Hobson318/Klipper_Expander_Mount/.metadata.yml b/printer_mods/Hobson318/Klipper_Expander_Mount/.metadata.yml index 2b3916adb..fe67c64be 100644 --- a/printer_mods/Hobson318/Klipper_Expander_Mount/.metadata.yml +++ b/printer_mods/Hobson318/Klipper_Expander_Mount/.metadata.yml @@ -13,4 +13,7 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- Klipper_Expander_Mount.stl +- Klipper_Expander_Mount_with_Mounting_Holes.stl title: Klipper Expander Mount diff --git a/printer_mods/Iakabos/C920_mount/.metadata.yml b/printer_mods/Iakabos/C920_mount/.metadata.yml index bf1ed22a9..75016b1d1 100644 --- a/printer_mods/Iakabos/C920_mount/.metadata.yml +++ b/printer_mods/Iakabos/C920_mount/.metadata.yml @@ -5,4 +5,6 @@ mod_version: 1 printer_compatibility: - V1.8 - V2.4 +stl: +- C920_Mount_Slim.stl title: c920 Mount diff --git a/printer_mods/Iakabos/V0_beltchain/.metadata.yml b/printer_mods/Iakabos/V0_beltchain/.metadata.yml index 930051225..c8dbbf9a8 100644 --- a/printer_mods/Iakabos/V0_beltchain/.metadata.yml +++ b/printer_mods/Iakabos/V0_beltchain/.metadata.yml @@ -4,4 +4,12 @@ images: [] mod_version: 1 printer_compatibility: - V0.2 +stl: +- Mod_Beltchain0_Anchor_Closed.stl +- Mod_Beltchain0_Anchor_Open.stl +- Mod_Beltchain0_Link_Slotted.stl +- Stock_Beltchain0_Adapter.stl +- Stock_Beltchain0_Bottom.stl +- Stock_Beltchain0_Link.stl +- Stock_Beltchain0_Top.stl title: V0 beltchains diff --git a/printer_mods/JD/RefillPlease/.metadata.yml b/printer_mods/JD/RefillPlease/.metadata.yml index 27d0b7aa9..b718d8ef6 100644 --- a/printer_mods/JD/RefillPlease/.metadata.yml +++ b/printer_mods/JD/RefillPlease/.metadata.yml @@ -12,4 +12,9 @@ printer_compatibility: - V1.8 - V2.4 - VT +stl: +- STLs/cover_left.stl +- STLs/cover_right.stl +- STLs/[a]_core_left.stl +- STLs/[a]_core_right.stl title: V2.4 Filament runout sensor diff --git a/printer_mods/JJFX/CRTouch_Snap_Mount/.metadata.yml b/printer_mods/JJFX/CRTouch_Snap_Mount/.metadata.yml index 0df46dca6..582aeef27 100644 --- a/printer_mods/JJFX/CRTouch_Snap_Mount/.metadata.yml +++ b/printer_mods/JJFX/CRTouch_Snap_Mount/.metadata.yml @@ -17,4 +17,7 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- CRTouch-mount.stl +- CRTouch-spacer.stl title: 'V2.4 CR Touch Snap Mount ' diff --git a/printer_mods/JNP/Back-Door/.metadata.yml b/printer_mods/JNP/Back-Door/.metadata.yml index 030318e4b..e038f5bf9 100644 --- a/printer_mods/JNP/Back-Door/.metadata.yml +++ b/printer_mods/JNP/Back-Door/.metadata.yml @@ -10,4 +10,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/Back_Door.stl +- STLs/Handle_Mini_Backdoor.stl title: Back Door diff --git a/printer_mods/JNP/Deck_Panel_Rear/.metadata.yml b/printer_mods/JNP/Deck_Panel_Rear/.metadata.yml index 9a1acfd31..c65cb52de 100644 --- a/printer_mods/JNP/Deck_Panel_Rear/.metadata.yml +++ b/printer_mods/JNP/Deck_Panel_Rear/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/Deck_Panel_rear.stl title: Deck Panel diff --git a/printer_mods/JNP/Drawer/.metadata.yml b/printer_mods/JNP/Drawer/.metadata.yml index a406c0388..51725253f 100644 --- a/printer_mods/JNP/Drawer/.metadata.yml +++ b/printer_mods/JNP/Drawer/.metadata.yml @@ -11,4 +11,11 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/Drawer_A.stl +- STLs/Drawer_B.stl +- STLs/Drawer_C.stl +- STLs/Knob.stl +- STLs/Skirt_left.stl +- STLs/Skirt_right.stl title: Drawer diff --git a/printer_mods/JNP/Front-Door/.metadata.yml b/printer_mods/JNP/Front-Door/.metadata.yml index 6d5cf81af..93ec06add 100644 --- a/printer_mods/JNP/Front-Door/.metadata.yml +++ b/printer_mods/JNP/Front-Door/.metadata.yml @@ -9,4 +9,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/Front_Door_Frame.stl +- STLs/Handle_Mini_front.stl title: Front Door diff --git a/printer_mods/JNP/HEPA-Filter/.metadata.yml b/printer_mods/JNP/HEPA-Filter/.metadata.yml index f8ef8bc89..a3f811e73 100644 --- a/printer_mods/JNP/HEPA-Filter/.metadata.yml +++ b/printer_mods/JNP/HEPA-Filter/.metadata.yml @@ -8,4 +8,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/HEPA_Fan_mounting.stl +- STLs/HEPA_Filter_Cage.stl title: Hepa Filter diff --git a/printer_mods/JNP/Mid-Panel/.metadata.yml b/printer_mods/JNP/Mid-Panel/.metadata.yml index 356226aea..23dc869e1 100644 --- a/printer_mods/JNP/Mid-Panel/.metadata.yml +++ b/printer_mods/JNP/Mid-Panel/.metadata.yml @@ -9,4 +9,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/Mid_Panel_new.stl +- STLs/Mid_Panel_with_cablemanagement.stl title: Mid Panel diff --git a/printer_mods/JNP/Neopixel-Y_Rails/.metadata.yml b/printer_mods/JNP/Neopixel-Y_Rails/.metadata.yml index 03e6cd1f8..5d8ff6adf 100644 --- a/printer_mods/JNP/Neopixel-Y_Rails/.metadata.yml +++ b/printer_mods/JNP/Neopixel-Y_Rails/.metadata.yml @@ -7,4 +7,9 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/Neopixel_Cover_left.stl +- STLs/Neopixel_Cover_right.stl +- STLs/Neopixel_Mainbody_left.stl +- STLs/Neopixel_Mainbody_right.stl title: Neopixel Case diff --git a/printer_mods/JNP/Side-Panels/.metadata.yml b/printer_mods/JNP/Side-Panels/.metadata.yml index 9ea743a9a..9f38a3b0b 100644 --- a/printer_mods/JNP/Side-Panels/.metadata.yml +++ b/printer_mods/JNP/Side-Panels/.metadata.yml @@ -11,4 +11,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/Panel_left.stl +- STLs/Panel_right.stl title: Side Panels diff --git a/printer_mods/Jasrags/sw_fee_slot_filament_passthrough/.metadata.yml b/printer_mods/Jasrags/sw_fee_slot_filament_passthrough/.metadata.yml index a8d449b01..6c07b61bf 100644 --- a/printer_mods/Jasrags/sw_fee_slot_filament_passthrough/.metadata.yml +++ b/printer_mods/Jasrags/sw_fee_slot_filament_passthrough/.metadata.yml @@ -12,4 +12,7 @@ images: mod_version: 1 printer_compatibility: - VSW +stl: +- STL/feed_slot.stl +- STL/feed_slot_clamp_x2.stl title: Feed slot with filament pass-through diff --git a/printer_mods/JeremyRuhland/V2.4_Plug_Panel_Generic_Combo/.metadata.yml b/printer_mods/JeremyRuhland/V2.4_Plug_Panel_Generic_Combo/.metadata.yml index d3c756e69..a6d86a8eb 100644 --- a/printer_mods/JeremyRuhland/V2.4_Plug_Panel_Generic_Combo/.metadata.yml +++ b/printer_mods/JeremyRuhland/V2.4_Plug_Panel_Generic_Combo/.metadata.yml @@ -9,4 +9,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- stl/plug_panel_generic_combo.stl title: V2.4 Plug Panel Generic Combo diff --git a/printer_mods/Jon/1515_led_mount/.metadata.yml b/printer_mods/Jon/1515_led_mount/.metadata.yml index e066c2237..a0d820a78 100644 --- a/printer_mods/Jon/1515_led_mount/.metadata.yml +++ b/printer_mods/Jon/1515_led_mount/.metadata.yml @@ -10,4 +10,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/1515_Led_Diffuser_Left_x9.stl +- STL/1515_Led_Diffuser_Right_x9.stl title: 1515 LED Mount diff --git a/printer_mods/Jon/V0.1_Z_Cover/.metadata.yml b/printer_mods/Jon/V0.1_Z_Cover/.metadata.yml index 67429e7f8..a3242c93d 100644 --- a/printer_mods/Jon/V0.1_Z_Cover/.metadata.yml +++ b/printer_mods/Jon/V0.1_Z_Cover/.metadata.yml @@ -1,10 +1,22 @@ -cad: +cad: - CAD/Bottom_panel_Airgap_Lid_v6.f3d - CAD/Bottom_panel_Airgap_Lid_v6.step -description: A cover to stop things from dropping down the Z motor and disappearing forever. +description: A cover to stop things from dropping down the Z motor and disappearing + forever. images: - IMG/Bottom_panel_Airgap_Lid_v4.png mod_version: 1 printer_compatibility: - V0.1 +stl: +- STL/Bottom_panel_middle_cover_only_A.stl +- STL/Bottom_panel_middle_cover_only_B.stl +- STL/Bottom_panel_middle_cover_only_C.stl +- STL/Bottom_panel_Z_cover_A.stl +- STL/Bottom_panel_Z_cover_B.stl +- STL/Bottom_panel_Z_cover_C.stl +- STL/Measuring_tool_A.stl +- STL/Measuring_tool_B.stl +- STL/Measuring_tool_C.stl +- STL/Rail_carriage_stopper_x2.stl title: Z Cover for v0.1 diff --git a/printer_mods/Jon/adxl345_skirt_keystone/.metadata.yml b/printer_mods/Jon/adxl345_skirt_keystone/.metadata.yml index 9fd3010f3..d99961fea 100644 --- a/printer_mods/Jon/adxl345_skirt_keystone/.metadata.yml +++ b/printer_mods/Jon/adxl345_skirt_keystone/.metadata.yml @@ -5,4 +5,8 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/ADXL345.connector.keystone.x1.stl +- STL/lock.x2.stl +- STL/[a]_ADXL345.text.keystone.x1.stl title: adxl345 skirt keystone diff --git a/printer_mods/JosAr/Klicky-Probe/.metadata.yml b/printer_mods/JosAr/Klicky-Probe/.metadata.yml index 70afcc639..14a713283 100644 --- a/printer_mods/JosAr/Klicky-Probe/.metadata.yml +++ b/printer_mods/JosAr/Klicky-Probe/.metadata.yml @@ -82,4 +82,39 @@ printer_compatibility: - V1.8 - V2.4 - VT +stl: +- Base_STL/1mm_Spacer.stl +- Base_STL/KlickyProbe_Longer_v2.stl +- Base_STL/KlickyProbe_Long_v2.stl +- Base_STL/KlickyProbe_v2.stl +- Base_STL/Longer_probe_pressfit_helper.stl +- Base_STL/Probe_Dock_v2.1.stl +- Base_STL/Probe_magnet_holder.stl +- Base_STL/Probe_magnet_pressfit_helper.stl +- Base_STL/Probe_pressfit_holder.stl +- Base_STL/Switch_extender.stl +- Printers/v0/v0_STL/DockMount_extrabeef.stl +- Printers/v0/v0_STL/DockMount_fixed.stl +- Printers/v0/v0_STL/DockMount_SideScrews.stl +- Printers/v0/v0_STL/DockMount_TopScrews.stl +- Printers/v0/v0_STL/DockMount_variable.stl +- Printers/v0/v0_STL/Dragonfly_BMO_Cowling_wKlicky.stl +- Printers/v0/v0_STL/Front_cowling_mount.stl +- Printers/v0/v0_STL/MiniAB_Dragon_Cowling_wKlicky.stl +- Printers/v0/v0_STL/Serpa_Mini_Dragon_Cowling_wKlicky.stl +- Printers/v0/v0_STL/v01_integrated_mount.stl +- Printers/v0/v0_STL/V0_Fan_duct_wKlicky.stl +- Printers/v0/v0_STL/v0_integrated_mount.stl +- Printers/v1.8_v2.4_Legacy_Trident/v1.8_v2.4_Legacy_Trident_STL/Dock_mount_fixed_v2.stl +- Printers/v1.8_v2.4_Legacy_Trident/v1.8_v2.4_Legacy_Trident_STL/Dock_mount_variable_pt1_v2.stl +- Printers/v1.8_v2.4_Legacy_Trident/v1.8_v2.4_Legacy_Trident_STL/Dock_mount_variable_pt2_v2.stl +- Printers/v1.8_v2.4_Legacy_Trident/v1.8_v2.4_Legacy_Trident_STL/Dock_mount_variable_pt3_v2.stl +- Printers/v1.8_v2.4_Legacy_Trident/v1.8_v2.4_Legacy_Trident_STL/Dock_sidemount_fixed_v2.stl +- Printers/v1.8_v2.4_Legacy_Trident/v1.8_v2.4_Legacy_Trident_STL/Dock_sidemount_left_v2.stl +- Printers/v1.8_v2.4_Legacy_Trident/v1.8_v2.4_Legacy_Trident_STL/Dock_sidemount_right_v2.stl +- Printers/v1.8_v2.4_Legacy_Trident/v1.8_v2.4_Legacy_Trident_STL/KlickyProbe_AB_mount_v2.stl +- Printers/v1.8_v2.4_Legacy_Trident/v1.8_v2.4_Legacy_Trident_STL/Legacy_dock_mount_fixed_v2.stl +- Printers/v1.8_v2.4_Legacy_Trident/v1.8_v2.4_Legacy_Trident_STL/Mount_magnet_holder.stl +- Printers/v1.8_v2.4_Legacy_Trident/v1.8_v2.4_Legacy_Trident_STL/Mount_magnet_pressfit_helper.stl +- Printers/v1.8_v2.4_Legacy_Trident/v1.8_v2.4_Legacy_Trident_STL/Mount_pressfit_holder.stl title: Klicky Probe diff --git a/printer_mods/KenadyDwag44/sw_lightbar/.metadata.yml b/printer_mods/KenadyDwag44/sw_lightbar/.metadata.yml index 57bfd0f4f..582b00ecd 100644 --- a/printer_mods/KenadyDwag44/sw_lightbar/.metadata.yml +++ b/printer_mods/KenadyDwag44/sw_lightbar/.metadata.yml @@ -5,4 +5,8 @@ images: mod_version: 1 printer_compatibility: - VSW +stl: +- SW_lightbar_led_holder_modified_x1.stl +- SW_lightbar_left_mount_x1.stl +- SW_lightbar_right_mount_x1.stl title: Switchwire Lightbar diff --git a/printer_mods/KevinAkaSam/VEFACH/.metadata.yml b/printer_mods/KevinAkaSam/VEFACH/.metadata.yml index e1d11fd6c..f2a0d6c34 100644 --- a/printer_mods/KevinAkaSam/VEFACH/.metadata.yml +++ b/printer_mods/KevinAkaSam/VEFACH/.metadata.yml @@ -17,4 +17,15 @@ mod_version: 1 printer_compatibility: - V2.4 - VT +stl: +- STL_CAD/V2.4(R1)/0_filterdummy_dont_print.stl +- STL_CAD/V2.4(R1)/1_coal_for_infill_mesh.stl +- STL_CAD/V2.4(R1)/1_coal_with_mesh.stl +- STL_CAD/V2.4(R1)/1_hepa.stl +- STL_CAD/V2.4(R1)/1_lid.stl +- STL_CAD/V2.4(R2)_Trident/0_filterdummy_dont_print.stl +- STL_CAD/V2.4(R2)_Trident/1_coal_for_infill_mesh.stl +- STL_CAD/V2.4(R2)_Trident/1_coal_with_mesh.stl +- STL_CAD/V2.4(R2)_Trident/1_hepa.stl +- STL_CAD/V2.4(R2)_Trident/1_lid.stl title: VEFACH diff --git a/printer_mods/KiloQubit/V0_reverse_bowden_mount/.metadata.yml b/printer_mods/KiloQubit/V0_reverse_bowden_mount/.metadata.yml index 76a033b34..9cf83a1e8 100644 --- a/printer_mods/KiloQubit/V0_reverse_bowden_mount/.metadata.yml +++ b/printer_mods/KiloQubit/V0_reverse_bowden_mount/.metadata.yml @@ -9,4 +9,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- V0_Reverse_Bowden_Mount.stl title: V0 Reverse Bowden Mount diff --git a/printer_mods/KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts/.metadata.yml b/printer_mods/KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts/.metadata.yml index de991f685..8de1352d8 100644 --- a/printer_mods/KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts/.metadata.yml +++ b/printer_mods/KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts/.metadata.yml @@ -10,4 +10,7 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- Z_Chain_3_Hole_Lower_Mount.stl +- Z_Chain_3_Hole_Upper_Mount.stl title: V2.4 Z Chain Mounts for 3 Hole Chains diff --git a/printer_mods/KiloQubit/trident_schurter_power_inlet/.metadata.yml b/printer_mods/KiloQubit/trident_schurter_power_inlet/.metadata.yml index 4dba7c6a6..f260bd2e3 100644 --- a/printer_mods/KiloQubit/trident_schurter_power_inlet/.metadata.yml +++ b/printer_mods/KiloQubit/trident_schurter_power_inlet/.metadata.yml @@ -10,4 +10,6 @@ images: mod_version: 1 printer_compatibility: - VT +stl: +- STL/power_inlet_schurter.stl title: Trident Schurter Inlet Skirt diff --git a/printer_mods/Koios/6mm_Glass/.metadata.yml b/printer_mods/Koios/6mm_Glass/.metadata.yml index 2e1fc969a..cf39db391 100644 --- a/printer_mods/Koios/6mm_Glass/.metadata.yml +++ b/printer_mods/Koios/6mm_Glass/.metadata.yml @@ -9,4 +9,9 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/glass_rest.STL +- STLs/Lock_Body.stl +- STLs/Lock_Pin_A_x2.stl +- STLs/Lock_Pin_B_x2.stl title: 6mm Tempered Glass Mod diff --git a/printer_mods/Koios/C920_Mount/.metadata.yml b/printer_mods/Koios/C920_Mount/.metadata.yml index ceccb5020..3dabfc7aa 100644 --- a/printer_mods/Koios/C920_Mount/.metadata.yml +++ b/printer_mods/Koios/C920_Mount/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/C920_Top_Front_Mount.stl title: C920 Low Profile Mount diff --git a/printer_mods/Koios/LED_Mounts/.metadata.yml b/printer_mods/Koios/LED_Mounts/.metadata.yml index d9ba74fd0..da4caa434 100644 --- a/printer_mods/Koios/LED_Mounts/.metadata.yml +++ b/printer_mods/Koios/LED_Mounts/.metadata.yml @@ -7,4 +7,7 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/LED_Mount_A.stl +- STLs/LED_Mount_B.stl title: LED Bar Mounts diff --git a/printer_mods/Koios/V0_C920_Tophat_Mount/.metadata.yml b/printer_mods/Koios/V0_C920_Tophat_Mount/.metadata.yml index 8a11bcdd3..a79b274dc 100644 --- a/printer_mods/Koios/V0_C920_Tophat_Mount/.metadata.yml +++ b/printer_mods/Koios/V0_C920_Tophat_Mount/.metadata.yml @@ -10,4 +10,8 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/Cable_Clip_Tophat_Corner_x2.STL +- STLs/Cable_Clip_Tophat_x2.STL +- STLs/V0_C920_Mount.STL title: V0 C920 Tophat Mount diff --git a/printer_mods/Kosh42EFG/kirigami_bed_front/.metadata.yml b/printer_mods/Kosh42EFG/kirigami_bed_front/.metadata.yml index 3a79f1586..73418831f 100644 --- a/printer_mods/Kosh42EFG/kirigami_bed_front/.metadata.yml +++ b/printer_mods/Kosh42EFG/kirigami_bed_front/.metadata.yml @@ -5,4 +5,6 @@ images: [] mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/Front_Bed_Mount_x1.stl title: Kirigami bed front diff --git a/printer_mods/Kruppes/Closed_Bottom/.metadata.yml b/printer_mods/Kruppes/Closed_Bottom/.metadata.yml index 99a250738..4a1033358 100644 --- a/printer_mods/Kruppes/Closed_Bottom/.metadata.yml +++ b/printer_mods/Kruppes/Closed_Bottom/.metadata.yml @@ -12,4 +12,12 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Common_STLs/Back_Lip.stl +- Common_STLs/Skirt.stl +- Fancy_Panel/[a]_Foot_Back_x2.stl +- Fancy_Panel/[a]_Foot_Front_x2.stl +- Simple_Panel/[a]_Footback_L_x1.stl +- Simple_Panel/[a]_Footback_x1.stl +- Simple_Panel/[a]_Footfront_x2.stl title: Encosed Bottom diff --git a/printer_mods/Kruppes/Deck_Panel_inserts_logo/.metadata.yml b/printer_mods/Kruppes/Deck_Panel_inserts_logo/.metadata.yml index 6a6b1f33b..dcf8ffff3 100644 --- a/printer_mods/Kruppes/Deck_Panel_inserts_logo/.metadata.yml +++ b/printer_mods/Kruppes/Deck_Panel_inserts_logo/.metadata.yml @@ -10,4 +10,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Deck_Panel_no_Logo.stl title: V0 Printed Deck with inserts diff --git a/printer_mods/Kruppes/Tension_Meter/.metadata.yml b/printer_mods/Kruppes/Tension_Meter/.metadata.yml index af72aa102..766116c03 100644 --- a/printer_mods/Kruppes/Tension_Meter/.metadata.yml +++ b/printer_mods/Kruppes/Tension_Meter/.metadata.yml @@ -11,4 +11,6 @@ printer_compatibility: - V1.8 - V2.4 - VSW +stl: +- TensionMeter.stl title: Belt Tension Meter diff --git a/printer_mods/Kyleisah/CableGator/.metadata.yml b/printer_mods/Kyleisah/CableGator/.metadata.yml index c2dfa5702..a2f8b0661 100644 --- a/printer_mods/Kyleisah/CableGator/.metadata.yml +++ b/printer_mods/Kyleisah/CableGator/.metadata.yml @@ -17,4 +17,7 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STLs/Voron-CableGator-Lower-Jaw.stl +- STLs/Voron-CableGator-Upper-Jaw.stl title: CableGator Cable Comb diff --git a/printer_mods/LJ/Scrubby/.metadata.yml b/printer_mods/LJ/Scrubby/.metadata.yml index c2cd4d8ed..ba21601ae 100644 --- a/printer_mods/LJ/Scrubby/.metadata.yml +++ b/printer_mods/LJ/Scrubby/.metadata.yml @@ -14,4 +14,6 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- Scrubby.stl title: Scrubby diff --git a/printer_mods/Le0n/Magnetic_Panels_with_Magnet_Inserts/.metadata.yml b/printer_mods/Le0n/Magnetic_Panels_with_Magnet_Inserts/.metadata.yml index 787592bd8..020702c7f 100644 --- a/printer_mods/Le0n/Magnetic_Panels_with_Magnet_Inserts/.metadata.yml +++ b/printer_mods/Le0n/Magnetic_Panels_with_Magnet_Inserts/.metadata.yml @@ -16,4 +16,21 @@ printer_compatibility: - V1.8 - V2.4 - VT +stl: +- STL/Corner-Clip-4mm.stl +- STL/Corner-Clip-6mm.stl +- STL/Corner-Clip-7mm.stl +- STL/Install-Jig.stl +- STL/Magnet-Insert-Side-v1.stl +- STL/Magnet-Insert-v1.stl +- STL/Magnet-Insert-v2.stl +- STL/Mid-Panel-Clip-7mm-Lip.stl +- STL/Mid-Panel-Clip-7mm.stl +- STL/Midspan-Clip-4mm-Lip.stl +- STL/Midspan-Clip-4mm.stl +- STL/Midspan-Clip-6mm-Lip.stl +- STL/Midspan-Clip-6mm.stl +- STL/Unhammer-v1.stl +- STL/Unhammer-v2-Flat-Head.stl +- STL/Unhammer-v2-Hex-Head.stl title: Magnetic panels with Magnet Inserts diff --git a/printer_mods/Liselotte111/Red_Lizard_K1_UHF/.metadata.yml b/printer_mods/Liselotte111/Red_Lizard_K1_UHF/.metadata.yml index d5789b9f6..e80ed8ce8 100644 --- a/printer_mods/Liselotte111/Red_Lizard_K1_UHF/.metadata.yml +++ b/printer_mods/Liselotte111/Red_Lizard_K1_UHF/.metadata.yml @@ -8,4 +8,7 @@ mod_version: 1 printer_compatibility: - V2 - VT +stl: +- STL/stealthburner_printhead_k1-uhf_cw2.stl +- STL/stealthburner_printhead_k1-uhf_front.stl title: Red Lizard K1 UHF toolhead diff --git a/printer_mods/LoCoCNC/3mm_tophat_panel_parts/.metadata.yml b/printer_mods/LoCoCNC/3mm_tophat_panel_parts/.metadata.yml index 3c5b75e04..ce8d72727 100644 --- a/printer_mods/LoCoCNC/3mm_tophat_panel_parts/.metadata.yml +++ b/printer_mods/LoCoCNC/3mm_tophat_panel_parts/.metadata.yml @@ -4,4 +4,11 @@ images: [] mod_version: 1 printer_compatibility: - V0.2 +stl: +- Front_and_Rear_Midclip_3mm_Panels_x2.stl +- Left_and_Right_Midclip_3mm_Panels_x2.stl +- Lower_Corner_1_and_3_Clip_3mm_Panels_x2.stl +- Lower_Corner_2_and_4_Clip_3mm_Panels_x2.stl +- Upper_Corner_1_and_3_Clip_3mm_Panels_x2.stl +- Upper_Corner_2_and_4_Clip_3mm_Panels_x2.stl title: 3mm Top Hat Panels Clips diff --git a/printer_mods/LoCoCNC/MGN7H_Shims/.metadata.yml b/printer_mods/LoCoCNC/MGN7H_Shims/.metadata.yml index 1033de9c5..706d25a51 100644 --- a/printer_mods/LoCoCNC/MGN7H_Shims/.metadata.yml +++ b/printer_mods/LoCoCNC/MGN7H_Shims/.metadata.yml @@ -4,4 +4,7 @@ images: [] mod_version: 1 printer_compatibility: - V0.2 +stl: +- mgn7_spacer_2.stl +- mgn7_spacer_3.stl title: MGN7H Shims diff --git a/printer_mods/LoCoCNC/Mosquito_PTFE_Cutting_Jig/.metadata.yml b/printer_mods/LoCoCNC/Mosquito_PTFE_Cutting_Jig/.metadata.yml index 7cef3b819..98d31b380 100644 --- a/printer_mods/LoCoCNC/Mosquito_PTFE_Cutting_Jig/.metadata.yml +++ b/printer_mods/LoCoCNC/Mosquito_PTFE_Cutting_Jig/.metadata.yml @@ -4,4 +4,6 @@ images: [] mod_version: 1 printer_compatibility: - V0.2 +stl: +- 15mm_PTFE_Cut_Tool.stl title: Mosquito PTFE 15mm Tube Cutting Jig diff --git a/printer_mods/LoCoCNC/Strain_Relief_w_Microfit/.metadata.yml b/printer_mods/LoCoCNC/Strain_Relief_w_Microfit/.metadata.yml index d070615b2..9499e0bd0 100644 --- a/printer_mods/LoCoCNC/Strain_Relief_w_Microfit/.metadata.yml +++ b/printer_mods/LoCoCNC/Strain_Relief_w_Microfit/.metadata.yml @@ -8,4 +8,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Strain_Relief_Body_MF10_x1.stl title: Strain Relief w/ 10 Pin Microfit diff --git a/printer_mods/LoCoCNC/ssr_strap/.metadata.yml b/printer_mods/LoCoCNC/ssr_strap/.metadata.yml index 6b8910e47..9123ca17c 100644 --- a/printer_mods/LoCoCNC/ssr_strap/.metadata.yml +++ b/printer_mods/LoCoCNC/ssr_strap/.metadata.yml @@ -6,4 +6,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- SSR_STRAP.stl title: SSR Mounting Strap diff --git a/printer_mods/LoCoCNC/wire_grommets/.metadata.yml b/printer_mods/LoCoCNC/wire_grommets/.metadata.yml index 2d5556af9..50eac3d52 100644 --- a/printer_mods/LoCoCNC/wire_grommets/.metadata.yml +++ b/printer_mods/LoCoCNC/wire_grommets/.metadata.yml @@ -6,4 +6,9 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- grommet_1.stl +- Grommet_2.stl +- Grommet_3.stl +- Grommet_4.stl title: V2.4 Bed Wiring Grommet diff --git a/printer_mods/LoganFraser/ComboInlet/.metadata.yml b/printer_mods/LoganFraser/ComboInlet/.metadata.yml index 09a242182..b8c04cdab 100644 --- a/printer_mods/LoganFraser/ComboInlet/.metadata.yml +++ b/printer_mods/LoganFraser/ComboInlet/.metadata.yml @@ -9,4 +9,11 @@ mod_version: 1 printer_compatibility: - V2.4 - VT +stl: +- STLs/2.4r2_ComboNarrowInlet.stl +- STLs/2.4r2_ComboWideInlet.stl +- STLs/2.4_ComboNarrowInlet.stl +- STLs/2.4_ComboWideInlet.stl +- STLs/Trident_ComboNarrowInlet.stl +- STLs/Trident_ComboWideInlet.stl title: ComboInlet diff --git a/printer_mods/LoganFraser/HorseshoeSpoolHolder/.metadata.yml b/printer_mods/LoganFraser/HorseshoeSpoolHolder/.metadata.yml index f4acc5b14..71bb3bf2d 100644 --- a/printer_mods/LoganFraser/HorseshoeSpoolHolder/.metadata.yml +++ b/printer_mods/LoganFraser/HorseshoeSpoolHolder/.metadata.yml @@ -14,4 +14,10 @@ printer_compatibility: - V1.8 - V2.4 - VT +stl: +- STLs/608BearingRing(6x).stl +- STLs/ExternalSpoolHolder.stl +- STLs/PlasticBolt(x3).stl +- STLs/ShortPlasticBolt(3x).stl +- STLs/Trident_InternalSpoolHolder.stl title: HorseshoeSpoolHolder diff --git a/printer_mods/LoganFraser/PiPlate/.metadata.yml b/printer_mods/LoganFraser/PiPlate/.metadata.yml index ab0abe84b..706c03513 100644 --- a/printer_mods/LoganFraser/PiPlate/.metadata.yml +++ b/printer_mods/LoganFraser/PiPlate/.metadata.yml @@ -9,4 +9,12 @@ mod_version: 1 printer_compatibility: - V2.4 - VT +stl: +- STLs/2.4r2_Skirt_for_PiPlate.stl +- STLs/2.4_250-300_Skirt_for_PiPlate.stl +- STLs/2.4_250_Offset_Skirt_for_PiPlate.stl +- STLs/2.4_350_Skirt_for_PiPlate.stl +- STLs/Pi3Plate.stl +- STLs/Pi4Plate.stl +- STLs/Trident_Skirt_for_PiPlate.stl title: PiPlate diff --git a/printer_mods/LoganFraser/TridentInvertedElectronics/.metadata.yml b/printer_mods/LoganFraser/TridentInvertedElectronics/.metadata.yml index d5dbb6217..fa43f188a 100644 --- a/printer_mods/LoganFraser/TridentInvertedElectronics/.metadata.yml +++ b/printer_mods/LoganFraser/TridentInvertedElectronics/.metadata.yml @@ -8,4 +8,10 @@ images: mod_version: 1 printer_compatibility: - VT +stl: +- STLs/Inverted_DIN_Mount(Mirror)_x2.stl +- STLs/Inverted_DIN_Mount_x2.stl +- STLs/Z_Motor_Mount_Small_Left.stl +- STLs/Z_Motor_Mount_Small_Rear.stl +- STLs/Z_Motor_Mount_Small_Right.stl title: Trident Inverted Electronics diff --git a/printer_mods/LoganFraser/WagoMounts/.metadata.yml b/printer_mods/LoganFraser/WagoMounts/.metadata.yml index fcc882170..1f1cd7d5e 100644 --- a/printer_mods/LoganFraser/WagoMounts/.metadata.yml +++ b/printer_mods/LoganFraser/WagoMounts/.metadata.yml @@ -12,4 +12,18 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STLs/Din_Mount_Bracket.stl +- STLs/Wago-3x-221-413_Thin-Din_Rail_Mount.stl +- STLs/Wago_2x_221-415_Extrusion_Mount.stl +- STLs/Wago_2x_221-415_Thin_Din_Rail_Mount.stl +- STLs/Wago_3x_221-412_DIN_Mount.stl +- STLs/Wago_3x_221-413_DIN_Mount.stl +- STLs/Wago_3x_221-413_Extrusion_Mount.stl +- STLs/Wago_3x_221-415_DIN_Mount.stl +- STLs/Wago_3x_221-415_Extrusion_Mount.stl +- STLs/Wago_3x_221-415_Skirt_Inlet_Mount.stl +- STLs/Wago_3x_221-415_Thin_Din_Rail_Mount.stl +- STLs/Wago_4x_221-412_Extrusion_Mount.stl +- STLs/Wago_5x_221-412_Extrusion_Mount.stl title: WagoMounts diff --git a/printer_mods/Long/Mantis_Dual_5015/.metadata.yml b/printer_mods/Long/Mantis_Dual_5015/.metadata.yml index a8edea0ed..0747960f7 100644 --- a/printer_mods/Long/Mantis_Dual_5015/.metadata.yml +++ b/printer_mods/Long/Mantis_Dual_5015/.metadata.yml @@ -60,4 +60,44 @@ mod_version: 1 printer_compatibility: - V1.8 - V2.4 +stl: +- STLs/Carriage_MGN12_v1.040.stl +- STLs/Carriage_MGN9_v1.0.stl +- STLs/Chain_Anchor_v3.1_IGUS.stl +- STLs/Chain_Anchor_v3.2.stl +- STLs/Hotend_Mount_Dragon_v1.040.stl +- STLs/Hotend_Mount_Dragon_v1.040_sherpa_brace.stl +- STLs/Hotend_Mount_Rapido_v.03.stl +- STLs/Hotend_Mount_Rapido_v.03_Rotated120Degrees.stl +- STLs/Umbilical_Mount_v2.stl +- STLs/Ducts/1.8/Duct_v1.037_Left_+2mm.stl +- STLs/Ducts/1.8/Duct_v1.037_Right_+2mm.stl +- STLs/Ducts/2.4/duct_dragon_crazy_volcano_v1.0_left.stl +- STLs/Ducts/2.4/duct_dragon_crazy_volcano_v1.0_right.stl +- STLs/Ducts/2.4/duct_dragon_v1.041_Left.stl +- STLs/Ducts/2.4/duct_dragon_v1.041_Right.stl +- STLs/Ducts/2.4/duct_dragon_v1.043e_Left.stl +- STLs/Ducts/2.4/duct_dragon_v1.043e_Right.stl +- STLs/Ducts/2.4/duct_rapido_HF_v0.03b_left.stl +- STLs/Ducts/2.4/duct_rapido_HF_v0.03b_right.stl +- STLs/Ducts/2.4/duct_rapido_UHF_v0.03b_left.stl +- STLs/Ducts/2.4/duct_rapido_UHF_v0.03b_right.stl +- STLs/Duct_Brace/Duct_Brace_Simple_v1.0.stl +- STLs/Duct_Brace/Full_Brace/Dragon/Duct_Brace_Dragon_Clamp_Left_v1.0.stl +- STLs/Duct_Brace/Full_Brace/Dragon/Duct_Brace_Dragon_Clamp_Right_v1.0.stl +- STLs/Duct_Brace/Full_Brace/Dragon/Duct_Brace_Dragon_Full_v1.2_Closed_mount.stl +- STLs/Duct_Brace/Full_Brace/Dragon/Duct_Brace_Dragon_Full_v1.2_Open_mount.stl +- STLs/Duct_Brace/Full_Brace/Rapido_Crazy_Volcano/Duct_Brace_Rapido_Crazy_Volcano_Clamp_Left_v1.1.stl +- STLs/Duct_Brace/Full_Brace/Rapido_Crazy_Volcano/Duct_Brace_Rapido_Crazy_Volcano_Clamp_Right_v1.1.stl +- STLs/Duct_Brace/Full_Brace/Rapido_Crazy_Volcano/Duct_Brace_Rapido_Crazy_Volcano_Full_v1.2_Closed_Mount.stl +- STLs/Duct_Brace/Full_Brace/Rapido_Crazy_Volcano/Duct_Brace_Rapido_Crazy_Volcano_Full_v1.2_Open_Mount.stl +- STLs/Magprobe/Magprobe_v0.31_Dragon.stl +- STLs/Magprobe/Magprobe_v0.31_RapidoHF_and_CrazyVolcano.stl +- STLs/Magprobe/Magprobe_v0.31_RapidoUHF.stl +- STLs/Magprobe/Bed_Extrusion_Mount/Magprobe_Dock_Arms_v1.5.stl +- STLs/Magprobe/Bed_Extrusion_Mount/Magprobe_Dock_Mount_v1.0.stl +- STLs/Magprobe/Gantry_Mount/Magprobe_Gantry_Dock_Arm_v1.5_double_magnet.stl +- STLs/Magprobe/Gantry_Mount/Magprobe_Gantry_Dock_Arm_v1.5_Single_magnet.stl +- STLs/Magprobe/Gantry_Mount/Magprobe_Gantry_Dock_Mount_by_JosAr_v1.stl +- STLs/Magprobe/Gantry_Mount/Magprobe_Gantry_Extrusion_Mount_by_JosAr_v1.stl title: Mantis Dual 5015 Toolhead diff --git a/printer_mods/Lukas/SSD1306_Case_Front_Cover/.metadata.yml b/printer_mods/Lukas/SSD1306_Case_Front_Cover/.metadata.yml index 3291efdeb..cfe1ac493 100644 --- a/printer_mods/Lukas/SSD1306_Case_Front_Cover/.metadata.yml +++ b/printer_mods/Lukas/SSD1306_Case_Front_Cover/.metadata.yml @@ -9,4 +9,6 @@ mod_version: 1 printer_compatibility: - V2.4 - VT +stl: +- STL/SSD1306-Cover.stl title: SSD1306 Case Front Cover diff --git a/printer_mods/MCMBen/Voron0_Block_and_Tackle_Z_Belt/.metadata.yml b/printer_mods/MCMBen/Voron0_Block_and_Tackle_Z_Belt/.metadata.yml index aa73f9c16..2c3d73dc5 100644 --- a/printer_mods/MCMBen/Voron0_Block_and_Tackle_Z_Belt/.metadata.yml +++ b/printer_mods/MCMBen/Voron0_Block_and_Tackle_Z_Belt/.metadata.yml @@ -9,4 +9,17 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/bed_front_Voron0.1_v1.stl +- STLs/bed_front_Voron0_v1.stl +- STLs/bed_mid_v2.stl +- STLs/bed_rear_v2.stl +- STLs/bottom_bracket_v3.stl +- STLs/motor_bracket_4064_v1.stl +- STLs/pulley_40_v1.stl +- STLs/pulley_48_v2.stl +- STLs/pulley_64_v1.stl +- STLs/tensioner_insert_v1.stl +- STLs/top_bracket_v3.stl +- STLs/[a]_tensioner_v1.stl title: Voron0 Block & Tackle Z Belt diff --git a/printer_mods/MSA/V0-Belt-tension-helper/.metadata.yml b/printer_mods/MSA/V0-Belt-tension-helper/.metadata.yml index 69d2ae80a..443da307d 100644 --- a/printer_mods/MSA/V0-Belt-tension-helper/.metadata.yml +++ b/printer_mods/MSA/V0-Belt-tension-helper/.metadata.yml @@ -19,4 +19,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/belttool-btm_v2.stl +- STL/belttool-top_v2.stl title: Belt tension helper diff --git a/printer_mods/MSiemons/TophatHingeV0.1/.metadata.yml b/printer_mods/MSiemons/TophatHingeV0.1/.metadata.yml index 2a4c664d1..e9d0fef1e 100644 --- a/printer_mods/MSiemons/TophatHingeV0.1/.metadata.yml +++ b/printer_mods/MSiemons/TophatHingeV0.1/.metadata.yml @@ -14,4 +14,15 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Hinge_panel_left_2.5mm.stl +- Hinge_panel_left_2mm.stl +- Hinge_panel_left_3mm.stl +- Hinge_panel_right_2.5mm.stl +- Hinge_panel_right_2mm.stl +- Hinge_panel_right_3mm.stl +- Lower_Corner_adapted_1_and_3_Clip_x2.stl +- Lower_Corner_adapted_2_and_4_Clip_x2.stl +- Tophat_Part_back_left.stl +- Tophat_Part_back_right.stl title: Tophat Hinge V0 diff --git a/printer_mods/Mac10goesBRRRT/BTT_PiTFT/.metadata.yml b/printer_mods/Mac10goesBRRRT/BTT_PiTFT/.metadata.yml index dc6aaff0e..3537fb9f1 100644 --- a/printer_mods/Mac10goesBRRRT/BTT_PiTFT/.metadata.yml +++ b/printer_mods/Mac10goesBRRRT/BTT_PiTFT/.metadata.yml @@ -11,4 +11,9 @@ mod_version: 1 printer_compatibility: - V2.4 - VT +stl: +- STL/display_middle_skirt.stl +- STL/pitft70_housing_front.stl +- STL/pitft70_housing_rear.stl +- STL/[a]_display_mount_x2.stl title: PiTFT Mount diff --git a/printer_mods/Majarspeed/Hartk_Mount_Galileo/.metadata.yml b/printer_mods/Majarspeed/Hartk_Mount_Galileo/.metadata.yml index 95658ae82..313e3c525 100644 --- a/printer_mods/Majarspeed/Hartk_Mount_Galileo/.metadata.yml +++ b/printer_mods/Majarspeed/Hartk_Mount_Galileo/.metadata.yml @@ -6,4 +6,7 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- Hartk_board_mount_galileo.stl +- Hartk_optional_spacer_X2.stl title: Hartk board mount galileo diff --git a/printer_mods/MakeALeft/Switchwire_Front_Grill/.metadata.yml b/printer_mods/MakeALeft/Switchwire_Front_Grill/.metadata.yml index 768b82151..5b11dd00c 100644 --- a/printer_mods/MakeALeft/Switchwire_Front_Grill/.metadata.yml +++ b/printer_mods/MakeALeft/Switchwire_Front_Grill/.metadata.yml @@ -5,4 +5,6 @@ images: - Images/CleanGrill.jpg mod_version: 1 printer_compatibility: [] +stl: +- front_mid_grill_no_magnets.stl title: Switchwire Clean Center Grill diff --git a/printer_mods/MapleLeafMakers/Kirigami_Stealth_Bumper/.metadata.yml b/printer_mods/MapleLeafMakers/Kirigami_Stealth_Bumper/.metadata.yml index e40aa10e5..abdcee04c 100644 --- a/printer_mods/MapleLeafMakers/Kirigami_Stealth_Bumper/.metadata.yml +++ b/printer_mods/MapleLeafMakers/Kirigami_Stealth_Bumper/.metadata.yml @@ -1,12 +1,18 @@ ---- -title: Kirigami Stealth Bumper -description: an RGB-Powered front-bed mount for the Voron V0 with Kirigami Bed Frame -mod_version: 1 -discord_username: mapleleafmakers cad: - CAD/stealth_bumper.step +description: an RGB-Powered front-bed mount for the Voron V0 with Kirigami Bed Frame +discord_username: mapleleafmakers images: - Images/photo.jpg - Images/render.png +mod_version: 1 printer_compatibility: - V0 +stl: +- STL/logo_insert.stl +- STL/neopixel_button_carrier.stl +- STL/rainbow_barf_carrier.stl +- STL/[a]_main_body.stl +- STL/[c]_neopixel_button_diffuser.stl +- STL/[c]_rainbow_barf_diffuser.stl +title: Kirigami Stealth Bumper diff --git a/printer_mods/MapleLeafMakers/Matchstick_Diffusers/.metadata.yml b/printer_mods/MapleLeafMakers/Matchstick_Diffusers/.metadata.yml index 5fb3692d7..33c1aadee 100644 --- a/printer_mods/MapleLeafMakers/Matchstick_Diffusers/.metadata.yml +++ b/printer_mods/MapleLeafMakers/Matchstick_Diffusers/.metadata.yml @@ -1,13 +1,19 @@ ---- -title: Matchstick Diffusers -description: Mounts and Diffusers for the popular "on-a-matchstick" LEDs -mod_version: 1 -discord_username: mapleleafmakers cad: - CAD/matchstick_diffuser.step +description: Mounts and Diffusers for the popular "on-a-matchstick" LEDs +discord_username: mapleleafmakers images: - Images/CAD1.png - Images/photo.jpg - +mod_version: 1 printer_compatibility: - V0 +stl: +- STL/bottom_mount_clip_x4.stl +- STL/main_body_daylight_A.stl +- STL/main_body_daylight_B.stl +- STL/main_body_rainbow_A.stl +- STL/main_body_rainbow_B.stl +- STL/top_mount_clip_x4.stl +- STL/[c]_diffuser_x2.stl +title: Matchstick Diffusers diff --git a/printer_mods/MapleLeafMakers/Modesty_Mesh/.metadata.yml b/printer_mods/MapleLeafMakers/Modesty_Mesh/.metadata.yml index e60a6f15a..3bc9bd644 100755 --- a/printer_mods/MapleLeafMakers/Modesty_Mesh/.metadata.yml +++ b/printer_mods/MapleLeafMakers/Modesty_Mesh/.metadata.yml @@ -1,13 +1,14 @@ ---- -title: Modesty Mesh -description: Customizable mesh inserts to hide your messy electronics compartment. -mod_version: 1 -discord_username: mapleleafmakers cad: - CAD/V0_Modesty_Mesh.step +description: Customizable mesh inserts to hide your messy electronics compartment. +discord_username: mapleleafmakers images: - Images/render.png - Images/parts.png - Images/sliced.png +mod_version: 1 printer_compatibility: - V0 +stl: +- STL/[a]_modesty_mesh_x2.stl +title: Modesty Mesh diff --git a/printer_mods/MapleLeafMakers/Rainbow_Serial_Bumper/.metadata.yml b/printer_mods/MapleLeafMakers/Rainbow_Serial_Bumper/.metadata.yml index 90949a21c..718d81718 100644 --- a/printer_mods/MapleLeafMakers/Rainbow_Serial_Bumper/.metadata.yml +++ b/printer_mods/MapleLeafMakers/Rainbow_Serial_Bumper/.metadata.yml @@ -1,11 +1,8 @@ ---- -title: Rainbow Serial Bumper -description: Just a little bit of extra bling for your Voron Trident -mod_version: 1 -discord_username: mapleleafmakers cad: - CAD/Rainbow_Serial_Bumper.step - CAD/Rainbow_Serial_Bumper.f3d +description: Just a little bit of extra bling for your Voron Trident +discord_username: mapleleafmakers images: - Images/[a]_main_body.gif - Images/[a]_main_body_slicer.png @@ -21,5 +18,12 @@ images: - Images/assembly_2.gif - Images/install.gif - Images/tridentbling.gif +mod_version: 1 printer_compatibility: - VT +stl: +- STL/[a]_main_body.stl +- STL/[oc]_insert.stl +- STL/[o]_back_plate.stl +- STL/[o]_insert_collar.stl +title: Rainbow Serial Bumper diff --git a/printer_mods/MapleLeafMakers/Stealth_Handles/.metadata.yml b/printer_mods/MapleLeafMakers/Stealth_Handles/.metadata.yml index cbd187f4b..92a80083c 100755 --- a/printer_mods/MapleLeafMakers/Stealth_Handles/.metadata.yml +++ b/printer_mods/MapleLeafMakers/Stealth_Handles/.metadata.yml @@ -1,13 +1,15 @@ ---- -title: Stealth Handles -description: Stealthy and stylish handles for your V0 -mod_version: 1 -discord_username: mapleleafmakers cad: - CAD/stealth_handle.step +description: Stealthy and stylish handles for your V0 +discord_username: mapleleafmakers images: - Images/CAD2.png - Images/CAD.png - Images/slicer.png +mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/handle_a.stl +- STL/handle_b.stl +title: Stealth Handles diff --git a/printer_mods/MapleLeafMakers/URBI/.metadata.yml b/printer_mods/MapleLeafMakers/URBI/.metadata.yml index e573cff9b..8d8c6ee89 100644 --- a/printer_mods/MapleLeafMakers/URBI/.metadata.yml +++ b/printer_mods/MapleLeafMakers/URBI/.metadata.yml @@ -1,10 +1,8 @@ ---- -title: Upper Rear Bowden Inlet (URBI) -description: A Reverse Bowden Inlet for the upper-rear panel of the Voron Zero with an optional filament sensor. -mod_version: 1 -discord_username: mapleleafmakers cad: - CAD/URBI_Assembly.step +description: A Reverse Bowden Inlet for the upper-rear panel of the Voron Zero with + an optional filament sensor. +discord_username: mapleleafmakers images: - Images/URBI-ECAS4.gif - Images/URBI-PC4.gif @@ -14,6 +12,14 @@ images: - Images/URBIFS.gif - Images/options.png - Images/photo.jpg - +mod_version: 1 printer_compatibility: - V0 +stl: +- STL/URBI-ECAS4.stl +- STL/URBI-PC4.stl +- STL/URBI-SFS2.stl +- STL/URBI.stl +- STL/URBIFS-PC4.stl +- STL/URBIFS.stl +title: Upper Rear Bowden Inlet (URBI) diff --git a/printer_mods/MapleLeafMakers/Umbilical_Collar/.metadata.yml b/printer_mods/MapleLeafMakers/Umbilical_Collar/.metadata.yml index 408ef00be..6448d7fa3 100755 --- a/printer_mods/MapleLeafMakers/Umbilical_Collar/.metadata.yml +++ b/printer_mods/MapleLeafMakers/Umbilical_Collar/.metadata.yml @@ -1,13 +1,15 @@ ---- -title: Umbilical Collar -description: An adjustable umbilical collar for the stock motor panel on the V0 -mod_version: 1 -discord_username: mapleleafmakers cad: - CAD/umbilical_collar.step +description: An adjustable umbilical collar for the stock motor panel on the V0 +discord_username: mapleleafmakers images: - Images/V0_Umbilical_Collar.gif - Images/assembly.png - Images/motor_panel.png +mod_version: 1 printer_compatibility: - V0 +stl: +- STL/collar_bottom.stl +- STL/collar_top.stl +title: Umbilical Collar diff --git a/printer_mods/MasturMynd/V0.1-Stealth_Zero/.metadata.yml b/printer_mods/MasturMynd/V0.1-Stealth_Zero/.metadata.yml index 1afd018db..b98f56d7f 100644 --- a/printer_mods/MasturMynd/V0.1-Stealth_Zero/.metadata.yml +++ b/printer_mods/MasturMynd/V0.1-Stealth_Zero/.metadata.yml @@ -1,6 +1,7 @@ cad: - CAD/V0.1-Stealth_Zero.step -description: A low poly gantry with front tensioners and optional front mounted x rail +description: A low poly gantry with front tensioners and optional front mounted x + rail images: - Images/V0.1-Complete_Gantry.png - Images/V0.1-B_Motor_Inner_Front.png @@ -13,4 +14,37 @@ images: mod_version: 1 printer_compatibility: - V0.1 +stl: +- Motor_Frames/V0.1-A_Drive_Frame_Lower_x1.stl +- Motor_Frames/V0.1-A_Drive_Frame_Upper_x1.stl +- Motor_Frames/V0.1-B_Drive_Frame_Lower_x1.stl +- Motor_Frames/V0.1-B_Drive_Frame_Upper_x1.stl +- Motor_Frames/[a]_V0.1-A_Drive_Cap_x1.stl +- Motor_Frames/[a]_V0.1-A_Drive_Frame_Middle_x1.stl +- Motor_Frames/[a]_V0.1-B_Drive_Cap_x1.stl +- Motor_Frames/[a]_V0.1-B_Drive_Frame_Middle_x1.stl +- Motor_Frames/[a]_V0.1-Lower_Corner_Rear_Left_x1.stl +- Motor_Frames/[a]_V0.1-Lower_Corner_Rear_Right_x1.stl +- Tensioners/V0.1-A_Tensioner_Housing_x1.stl +- Tensioners/V0.1-B_Tensioner_Housing_x1.stl +- Tensioners/[a]_Tensioner_x2.stl +- Tensioners/[a]_V0.1-Lower_Corner_Front_Left_x1.stl +- Tensioners/[a]_V0.1-Lower_Corner_Front_Right_x1.stl +- XY_Joints/[a]_X_Endstop_Bumper_x1.stl +- XY_Joints/Front_Rail/XY_Joint_Left_Bottom_x1.stl +- XY_Joints/Front_Rail/XY_Joint_Left_Top_x1.stl +- XY_Joints/Front_Rail/XY_Joint_Right_Bottom_x1.stl +- XY_Joints/Front_Rail/XY_Joint_Right_Top_x1.stl +- XY_Joints/Front_Rail/[a]_XY_Joint_Left_Mid_x1.stl +- XY_Joints/Front_Rail/[a]_XY_Joint_Right_Mid_x1.stl +- XY_Joints/Top_Rail/XY_Joint_Left_Bottom_x1.stl +- XY_Joints/Top_Rail/XY_Joint_Left_Top_x1.stl +- XY_Joints/Top_Rail/XY_Joint_Right_Bottom_x1.stl +- XY_Joints/Top_Rail/XY_Joint_Right_Top_x1.stl +- XY_Joints/Top_Rail/[a]_XY_Joint_Left_Mid_x1.stl +- XY_Joints/Top_Rail/[a]_XY_Joint_Right_Mid_x1.stl +- X_Axis/X_Carriage_x1.stl +- X_Axis/[a]_X-Endstop_Frame_x1.stl +- X_Axis/[a]_Y-Endstop_Frame_x1.stl +- X_Axis/[a]_Y_Endstop_Bumper_x1.stl title: Stealth Zero diff --git a/printer_mods/MasturMynd/V2-2-Piece_Z_Tensioners/.metadata.yml b/printer_mods/MasturMynd/V2-2-Piece_Z_Tensioners/.metadata.yml index 919744983..d610c78d8 100644 --- a/printer_mods/MasturMynd/V2-2-Piece_Z_Tensioners/.metadata.yml +++ b/printer_mods/MasturMynd/V2-2-Piece_Z_Tensioners/.metadata.yml @@ -1,16 +1,22 @@ cad: - CAD/2_Piece_Z_Idler_v4.step -description: Splits the tensioners into two pieces, allowing the tensioner to be printed in the strongest possible orientation +description: Splits the tensioners into two pieces, allowing the tensioner to be printed + in the strongest possible orientation images: - Images/preview.png -- Images/assembly_before_we_begin.png -- Images/assembly_compression_screw.png -- Images/assembly_heatset.png -- Images/assembly_idler_install.png -- Images/assembly_idler_shaft.png -- Images/assembly_joining.png -- Images/assembly_tensioner.png +- Images/assembly_before_we_begin.png +- Images/assembly_compression_screw.png +- Images/assembly_heatset.png +- Images/assembly_idler_install.png +- Images/assembly_idler_shaft.png +- Images/assembly_joining.png +- Images/assembly_tensioner.png mod_version: 1 printer_compatibility: - V2 +stl: +- STLs/[a]_z_tensioner_a_9mm_x4.stl +- STLs/[a]_z_tensioner_a_pinned_9mm_x4.stl +- STLs/[a]_z_tensioner_b_9mm_x4.stl +- STLs/[a]_z_tensioner_b_pinned_9mm_x4.stl title: 2-Piece Z Tensioners diff --git a/printer_mods/MathematicalPotato/v0.1_belted_z_drive/.metadata.yml b/printer_mods/MathematicalPotato/v0.1_belted_z_drive/.metadata.yml index fbf8f34e2..98d6c028d 100644 --- a/printer_mods/MathematicalPotato/v0.1_belted_z_drive/.metadata.yml +++ b/printer_mods/MathematicalPotato/v0.1_belted_z_drive/.metadata.yml @@ -16,4 +16,19 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/M4_80T_Gear.stl +- STL/Printed-PulleySpacer-x2.stl +- STL/V0-zbelt-BEDMOUNT_MODIFIED_V0.1.stl +- STL/V0-ZBelt-BeltClip-Bottom_MODIFIED_V0.1.stl +- STL/V0-ZBelt-BeltClip-Top_MODIFIED_V0.1.stl +- STL/V0-ZBelt-Deck-Panel-Rear.stl +- STL/V0-ZBelt-FrontBottom-Bracket.stl +- STL/V0-ZBelt-Pancake-Stepper-Bracket.stl +- STL/V0-ZBelt-Top-Idler-Back.stl +- STL/V0-ZBelt-Top-Idler-Front.stl +- STL/Kirigami_Bed_Mount/V0-ZBelt-KirigamiBed_belt_mount.stl +- STL/Kirigami_Bed_Mount/V0-ZBelt-KirigamiBed_body.stl +- STL/Kirigami_Bed_Mount/V0-ZBelt-KirigamiBed_bottom_belt_clamp.stl +- STL/Kirigami_Bed_Mount/V0-ZBelt-KirigamiBed_top_belt_clamp.stl title: V0.1 Belted Z Drive diff --git a/printer_mods/Maverick/MiniSB_LGX_Lite/.metadata.yml b/printer_mods/Maverick/MiniSB_LGX_Lite/.metadata.yml index f3dddc9ec..c116d463d 100644 --- a/printer_mods/Maverick/MiniSB_LGX_Lite/.metadata.yml +++ b/printer_mods/Maverick/MiniSB_LGX_Lite/.metadata.yml @@ -12,4 +12,7 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STLs/[a]_MiniSB_Cowling_x1.stl +- STLs/[a]_MiniSB_LGXL_Cowling_Multibody_Logo_x1.stl title: MiniSB_LGXL diff --git a/printer_mods/Maverick/MiniSB_Rapido/.metadata.yml b/printer_mods/Maverick/MiniSB_Rapido/.metadata.yml index 3be050eed..6c5906390 100644 --- a/printer_mods/Maverick/MiniSB_Rapido/.metadata.yml +++ b/printer_mods/Maverick/MiniSB_Rapido/.metadata.yml @@ -8,4 +8,8 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STLs/FS_Hotend_Mount_Phaetus_Rapido.stl +- STLs/[a]_MiniSB_Cowling_Rapido_Multibody_Logo_x1.stl +- STLs/[a]_MiniSB_Cowling_Rapido_x1.stl title: MiniSB_Rapido diff --git a/printer_mods/Maverick/MiniSB_Sharkfin/.metadata.yml b/printer_mods/Maverick/MiniSB_Sharkfin/.metadata.yml index e12212d44..15f815d57 100644 --- a/printer_mods/Maverick/MiniSB_Sharkfin/.metadata.yml +++ b/printer_mods/Maverick/MiniSB_Sharkfin/.metadata.yml @@ -10,4 +10,6 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STL/Sharkfin_MiniSB_cowling.stl title: MiniSB_Sharkfin diff --git a/printer_mods/Maverick/V0.2_Stealth_Skirts/.metadata.yml b/printer_mods/Maverick/V0.2_Stealth_Skirts/.metadata.yml index 83f3b5f81..7ff475f53 100644 --- a/printer_mods/Maverick/V0.2_Stealth_Skirts/.metadata.yml +++ b/printer_mods/Maverick/V0.2_Stealth_Skirts/.metadata.yml @@ -10,4 +10,26 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/3510_Fan_Grill_x2.stl +- STLs/3510_Side_Skirt_Mid_x2.stl +- STLs/4010_Fan_Grill_x2.stl +- STLs/4010_Side_Skirt_Mid_x2.stl +- STLs/Left_Front_Accent_x1.stl +- STLs/Left_Front_Foot_x1.stl +- STLs/Left_Front_Skirt_x1.stl +- STLs/Left_Rear_Accent_x1.stl +- STLs/Left_Side_Skirt_A_x1.stl +- STLs/Left_Side_Skirt_B_x1.stl +- STLs/Logo_Insert_x2.stl +- STLs/Mains_Inlet_Foot_x1.stl +- STLs/Rear_Skirt_x1.stl +- STLs/Right_Front_Accent_x1.stl +- STLs/Right_Front_Foot_x1.stl +- STLs/Right_Front_Skirt_x1.stl +- STLs/Right_Rear_Accent_x1.stl +- STLs/Right_Rear_Foot_x1.stl +- STLs/Right_Side_Skirt_A_x1.stl +- STLs/Right_Side_Skirt_B_x1.stl +- STLs/Side_Logo_Insert_x2.stl title: V0.2 Stealth Skirts diff --git a/printer_mods/Mckurt/Switchwire_Y_Belt_Tensioner/.metadata.yml b/printer_mods/Mckurt/Switchwire_Y_Belt_Tensioner/.metadata.yml index b35088aa8..237eb80fe 100644 --- a/printer_mods/Mckurt/Switchwire_Y_Belt_Tensioner/.metadata.yml +++ b/printer_mods/Mckurt/Switchwire_Y_Belt_Tensioner/.metadata.yml @@ -13,4 +13,8 @@ images: mod_version: 1 printer_compatibility: - VSW +stl: +- Stl/SW_Tensioner_Bearing_Block.stl +- Stl/SW_Tensioner_Body.stl +- Stl/SW_Tensioner_Cap.stl title: Switchwire Y Belt Tensioner diff --git a/printer_mods/Mellow/V0_Fly-Gemini/.metadata.yml b/printer_mods/Mellow/V0_Fly-Gemini/.metadata.yml index 11e9c3209..8a01eae94 100644 --- a/printer_mods/Mellow/V0_Fly-Gemini/.metadata.yml +++ b/printer_mods/Mellow/V0_Fly-Gemini/.metadata.yml @@ -4,4 +4,7 @@ images: [] mod_version: 1 printer_compatibility: - V0.2 +stl: +- Bracket/Gemini_v0.1_Stent_FLYLOGO.STL +- Bracket/Gemini_v0.1_Stent_MellowLOGO.STL title: V0 Fly-Gemini diff --git a/printer_mods/MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail/.metadata.yml b/printer_mods/MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail/.metadata.yml index 9b43bbcb7..ca7d65e8a 100644 --- a/printer_mods/MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail/.metadata.yml +++ b/printer_mods/MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail/.metadata.yml @@ -12,4 +12,16 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/LGX_A_Drive_Frame_Lower_x1.stl +- STL/LGX_A_Drive_Frame_Upper_x1.stl +- STL/LGX_B_Drive_Frame_Lower_x1.stl +- STL/LGX_B_Drive_Frame_Upper_x1.stl +- STL/LGX_Cowling_V0.1.stl +- STL/LGX_strain_relief.stl +- STL/LGX_X_carriage_back_plate.stl +- STL/LGX_X_carriage_top.stl +- STL/LGX_X_Endstop_Bumper.stl +- STL/LGX_Y_Endstop_Bumper.stl +- STL/LGX_Y_Endstop_Mount_x1.stl title: LGX mount for V0.1 with 2nd X rail diff --git a/printer_mods/Minsekt/Rear_Umbilical/.metadata.yml b/printer_mods/Minsekt/Rear_Umbilical/.metadata.yml index f27c83460..5b8575670 100644 --- a/printer_mods/Minsekt/Rear_Umbilical/.metadata.yml +++ b/printer_mods/Minsekt/Rear_Umbilical/.metadata.yml @@ -7,4 +7,8 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/front_cover.stl +- STL/rear_mounting.stl +- Y_Endstop_Relocation/STL/y_endstop.stl title: Rear Umbilical diff --git a/printer_mods/MrBean66/SKR_PRO_Mount/.metadata.yml b/printer_mods/MrBean66/SKR_PRO_Mount/.metadata.yml index f00cfca44..f20283062 100644 --- a/printer_mods/MrBean66/SKR_PRO_Mount/.metadata.yml +++ b/printer_mods/MrBean66/SKR_PRO_Mount/.metadata.yml @@ -6,4 +6,7 @@ mod_version: 1 printer_compatibility: - V1.8 - V2.4 +stl: +- SKR_PRO_DIN_Mount.stl +- Stretched_DIN_Clamp.stl title: SKR Pro DIN Mount diff --git a/printer_mods/MrDespair/MiniAB_Pinda/.metadata.yml b/printer_mods/MrDespair/MiniAB_Pinda/.metadata.yml index 7f87b2c6a..6cc5dd123 100644 --- a/printer_mods/MrDespair/MiniAB_Pinda/.metadata.yml +++ b/printer_mods/MrDespair/MiniAB_Pinda/.metadata.yml @@ -12,4 +12,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/Cowling_Dragon_v3.stl title: MiniAB Pinda Probe Mount diff --git a/printer_mods/Mrgl-Mrgl/LGX_Lite_Mount/.metadata.yml b/printer_mods/Mrgl-Mrgl/LGX_Lite_Mount/.metadata.yml index d3a03cb03..e7d2f03a4 100644 --- a/printer_mods/Mrgl-Mrgl/LGX_Lite_Mount/.metadata.yml +++ b/printer_mods/Mrgl-Mrgl/LGX_Lite_Mount/.metadata.yml @@ -7,4 +7,8 @@ printer_compatibility: - V1.8 - V2.4 - VT +stl: +- LGXLite_Mount.stl +- LGX_Lite_Chainmount_Generic.stl +- LGX_Lite_Chainmount_IGUS.stl title: LGX Lite Mount diff --git a/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/.metadata.yml b/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/.metadata.yml index f15db0d15..3eeade989 100644 --- a/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/.metadata.yml +++ b/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/.metadata.yml @@ -4,4 +4,9 @@ images: [] mod_version: 1 printer_compatibility: - V0.2 +stl: +- Toolhead_Left_Dragon_x1.stl +- Toolhead_Right_Dragon_x1.stl +- '[a]_Toolhead_Blower_Duct_Left_x1.stl' +- '[a]_Toolhead_Blower_Duct_Right_x1.stl' title: V0 Dragon Toolhead M2.5x8 diff --git a/printer_mods/Nomsplease/60mm_Shaft_Jig/.metadata.yml b/printer_mods/Nomsplease/60mm_Shaft_Jig/.metadata.yml index ecbcf104b..21db05485 100644 --- a/printer_mods/Nomsplease/60mm_Shaft_Jig/.metadata.yml +++ b/printer_mods/Nomsplease/60mm_Shaft_Jig/.metadata.yml @@ -5,4 +5,6 @@ images: [] mod_version: 1 printer_compatibility: - V2.4 +stl: +- 60mm_Shaft_Jig.stl title: 60mm Shaft Jig diff --git a/printer_mods/Nomsplease/V0_duet_wifi_mount/.metadata.yml b/printer_mods/Nomsplease/V0_duet_wifi_mount/.metadata.yml index 3697e957f..028cf4c52 100644 --- a/printer_mods/Nomsplease/V0_duet_wifi_mount/.metadata.yml +++ b/printer_mods/Nomsplease/V0_duet_wifi_mount/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- duet_wifi_mount.stl title: Duet Wifi Mount diff --git a/printer_mods/Nomsplease/V0_led_mounts/.metadata.yml b/printer_mods/Nomsplease/V0_led_mounts/.metadata.yml index b541e677f..351e6bb07 100644 --- a/printer_mods/Nomsplease/V0_led_mounts/.metadata.yml +++ b/printer_mods/Nomsplease/V0_led_mounts/.metadata.yml @@ -8,4 +8,8 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- 10mm_strip_mount_full.stl +- 10mm_strip_mount_full_with_channel.stl +- 12mm_strip_mini_mount.stl title: LED Mounts diff --git a/printer_mods/Nomsplease/V0_panel_mounts/.metadata.yml b/printer_mods/Nomsplease/V0_panel_mounts/.metadata.yml index a1e942f44..20630ecdc 100644 --- a/printer_mods/Nomsplease/V0_panel_mounts/.metadata.yml +++ b/printer_mods/Nomsplease/V0_panel_mounts/.metadata.yml @@ -6,4 +6,7 @@ images: [] mod_version: 1 printer_compatibility: - V0.2 +stl: +- rear_bottom_left_bracket_with_stop.stl +- rear_bottom_right_bracket_with_stop.stl title: Remixed Panel Mounts diff --git a/printer_mods/Nomsplease/V0_pi_zero_camera_mount/.metadata.yml b/printer_mods/Nomsplease/V0_pi_zero_camera_mount/.metadata.yml index 389089cd1..f3a4053ac 100644 --- a/printer_mods/Nomsplease/V0_pi_zero_camera_mount/.metadata.yml +++ b/printer_mods/Nomsplease/V0_pi_zero_camera_mount/.metadata.yml @@ -6,4 +6,7 @@ images: [] mod_version: 1 printer_compatibility: - V0.2 +stl: +- camera_mount.stl +- pi_zero_mount.stl title: Pi Cam/ZeroW Mount diff --git a/printer_mods/Nomsplease/V0_pocket_watch_rear_relocation/.metadata.yml b/printer_mods/Nomsplease/V0_pocket_watch_rear_relocation/.metadata.yml index 25ff2a7fa..413610708 100644 --- a/printer_mods/Nomsplease/V0_pocket_watch_rear_relocation/.metadata.yml +++ b/printer_mods/Nomsplease/V0_pocket_watch_rear_relocation/.metadata.yml @@ -5,4 +5,6 @@ images: [] mod_version: 1 printer_compatibility: - V0.2 +stl: +- pocket_watch_rear_mount.stl title: Pocket Watch Rear Reolcation Bracket diff --git a/printer_mods/Oakman/BTT_24V_UPS_Metal_DIN_Mount/.metadata.yml b/printer_mods/Oakman/BTT_24V_UPS_Metal_DIN_Mount/.metadata.yml index 94a2d9cb4..bd27b6c3f 100644 --- a/printer_mods/Oakman/BTT_24V_UPS_Metal_DIN_Mount/.metadata.yml +++ b/printer_mods/Oakman/BTT_24V_UPS_Metal_DIN_Mount/.metadata.yml @@ -6,4 +6,6 @@ mod_version: 1 printer_compatibility: - V1.8 - V2.4 +stl: +- BTT_UPS_24V_DIN.stl title: BTT 24V UPS Metal DIN Mount diff --git a/printer_mods/Oakman/FYSETC_Spider_Metal_DIN_Mount/.metadata.yml b/printer_mods/Oakman/FYSETC_Spider_Metal_DIN_Mount/.metadata.yml index b9b32e2f5..e36f1a4e1 100644 --- a/printer_mods/Oakman/FYSETC_Spider_Metal_DIN_Mount/.metadata.yml +++ b/printer_mods/Oakman/FYSETC_Spider_Metal_DIN_Mount/.metadata.yml @@ -7,4 +7,7 @@ mod_version: 1 printer_compatibility: - V1.8 - V2.4 +stl: +- Angry_Starfish.stl +- YASDM.stl title: FYSETC Spider Metal DIN Mount diff --git a/printer_mods/Oakman/RPI_Metal_DIN_Mount/.metadata.yml b/printer_mods/Oakman/RPI_Metal_DIN_Mount/.metadata.yml index c6b0803d7..432db4988 100644 --- a/printer_mods/Oakman/RPI_Metal_DIN_Mount/.metadata.yml +++ b/printer_mods/Oakman/RPI_Metal_DIN_Mount/.metadata.yml @@ -5,4 +5,6 @@ mod_version: 1 printer_compatibility: - V1.8 - V2.4 +stl: +- RPI_Metal_DIN_Mount.stl title: RPI Metal DIN Mount diff --git a/printer_mods/OboMaker3D/C17-EXT-CARTRIDGE/.metadata.yml b/printer_mods/OboMaker3D/C17-EXT-CARTRIDGE/.metadata.yml index 01c54675b..beeff2060 100644 --- a/printer_mods/OboMaker3D/C17-EXT-CARTRIDGE/.metadata.yml +++ b/printer_mods/OboMaker3D/C17-EXT-CARTRIDGE/.metadata.yml @@ -10,4 +10,7 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STLs/1_Filter_Grid.stl +- STLs/2_Filter.stl title: C17-EXT-CARTRIDGE for C17-EXT filter diff --git a/printer_mods/OboMaker3D/C17-EXT/.metadata.yml b/printer_mods/OboMaker3D/C17-EXT/.metadata.yml index 37057d7b9..1126b41d7 100644 --- a/printer_mods/OboMaker3D/C17-EXT/.metadata.yml +++ b/printer_mods/OboMaker3D/C17-EXT/.metadata.yml @@ -14,4 +14,15 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STLs/1_Filter_Box.stl +- STLs/2_Fan_Box.stl +- STLs/3a_Fan_Grid.stl +- STLs/3b_Fan_Grid_With_Voron_Adapter.stl +- STLs/4a_Filter_Box_Grid.stl +- STLs/4b_Filter_Box_Grid_Extract_125mm.stl +- STLs/4c_Filter_Box_Grid_Extract_100mm.stl +- STLs/5_Voron_Adapter_1.stl +- STLs/6_Voron_Adapter_2.stl +- STLs/7_Join.stl title: C17-EXT Filter HEPA Carbon diff --git a/printer_mods/Phalanx/Other-V2-Idlers/.metadata.yml b/printer_mods/Phalanx/Other-V2-Idlers/.metadata.yml index b42050004..a93c244a7 100644 --- a/printer_mods/Phalanx/Other-V2-Idlers/.metadata.yml +++ b/printer_mods/Phalanx/Other-V2-Idlers/.metadata.yml @@ -13,4 +13,8 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/Front_Idler_Bottomx2.stl +- STL/Front_Idler_Topx2.stl +- STL/[a]_Idler_Carrierx2.stl title: '"Other" Idlers Mod' diff --git a/printer_mods/Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch/.metadata.yml b/printer_mods/Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch/.metadata.yml index b7dafa4ed..cb6dd8d94 100644 --- a/printer_mods/Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch/.metadata.yml +++ b/printer_mods/Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch/.metadata.yml @@ -9,4 +9,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/Its_Not_a_Sexbolt_z_Switch_v4.stl title: V0.1 Z nozzle endstop switch diff --git a/printer_mods/Polar-Ted/V0_Two_Piece_Back_Panel/.metadata.yml b/printer_mods/Polar-Ted/V0_Two_Piece_Back_Panel/.metadata.yml index 7e1b2e4a7..7d278223b 100644 --- a/printer_mods/Polar-Ted/V0_Two_Piece_Back_Panel/.metadata.yml +++ b/printer_mods/Polar-Ted/V0_Two_Piece_Back_Panel/.metadata.yml @@ -6,4 +6,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/Back_Panel_Lower.stl +- STL/Back_Panel_Upper.stl title: V0.1 Two Piece Back Panel diff --git a/printer_mods/Polared/Power_Inlet_w_Keystone_Insert/.metadata.yml b/printer_mods/Polared/Power_Inlet_w_Keystone_Insert/.metadata.yml index 3d7c71e64..a3473842b 100644 --- a/printer_mods/Polared/Power_Inlet_w_Keystone_Insert/.metadata.yml +++ b/printer_mods/Polared/Power_Inlet_w_Keystone_Insert/.metadata.yml @@ -5,4 +5,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/Power_Inlet_w_Keystone_Insert_x1.stl title: Power Inlet with Keystone Insert diff --git a/printer_mods/Printopal/Magnetic_top_panel/.metadata.yml b/printer_mods/Printopal/Magnetic_top_panel/.metadata.yml index 2dc1be4fa..708a63aad 100644 --- a/printer_mods/Printopal/Magnetic_top_panel/.metadata.yml +++ b/printer_mods/Printopal/Magnetic_top_panel/.metadata.yml @@ -8,4 +8,11 @@ mod_version: 1 printer_compatibility: - V1.8 - V2.4 +stl: +- STL/250_top_skirt_220.stl +- STL/300_top_skirt_270.stl +- STL/350_top_skirt_320.stl +- STL/frame_corner.stl +- STL/panel_corner.stl +- STL/top_corner_skirt.stl title: Magnetic top panel diff --git a/printer_mods/PsychoShaft/C92X_PsycHoShafts_Mount/.metadata.yml b/printer_mods/PsychoShaft/C92X_PsycHoShafts_Mount/.metadata.yml index bac2061e6..27dd9ee17 100644 --- a/printer_mods/PsychoShaft/C92X_PsycHoShafts_Mount/.metadata.yml +++ b/printer_mods/PsychoShaft/C92X_PsycHoShafts_Mount/.metadata.yml @@ -12,4 +12,8 @@ printer_compatibility: - V1.8 - V2.4 - VT +stl: +- STL/C92X_Camera_Bracket.stl +- STL/C92X_Extrusion_Bracket_No_Support_Required.stl +- STL/C92X_Spacer_Arm.stl title: C92X_PsycHoShafts_Mount diff --git a/printer_mods/QuackProfit/V0-Adafruit-Y_Rails/.metadata.yml b/printer_mods/QuackProfit/V0-Adafruit-Y_Rails/.metadata.yml index d887e7417..8f0cfecf0 100644 --- a/printer_mods/QuackProfit/V0-Adafruit-Y_Rails/.metadata.yml +++ b/printer_mods/QuackProfit/V0-Adafruit-Y_Rails/.metadata.yml @@ -7,4 +7,9 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- body-left.stl +- body-right.stl +- cover-left.stl +- cover-right.stl title: V0 Adafruit NeoPixel LED Mounts diff --git a/printer_mods/README.md b/printer_mods/README.md index d6716b0da..d90abf412 100644 --- a/printer_mods/README.md +++ b/printer_mods/README.md @@ -7,425 +7,425 @@ Printer mods for Voron 3D printers | Creator | Mod title | Description | Printer compatibility | Last Changed | | --- | --- | --- | --- | --- | -| 1-0-R | [V2.4 handle](1-0-R/handle) | Handle for Voron 2.4 | V2.4 | 2023-07-14T13:24:54+00:00 | -| 120decibell | [Side entry exhaust housing](120decibell/exhaust_housing_side_entry) | Exhaust housing with dual cover screws and single or dual side... | V1.8, V2.4, VT | 2023-07-13T14:30:27+00:00 | -| | [Huvud Chain Mount](120decibell/huvud_chain_mount) | Huvud rear mount for Clockwork or LGX that supports a cable chain. | V1.8, VT | 2023-07-14T13:24:54+00:00 | -| 3dpandme | [FANnypack zero](3dpandme/Fannypack_zero) | Electronics cooling solution for Voron Zero | V0.2, VSW, VT | 2023-07-13T14:30:27+00:00 | -| | [Thermistor holder zero](3dpandme/Thermistor_holder_zero) | Extended thermistor holder for Voron Zero | V0.2, VSW, VT | 2023-07-14T13:24:54+00:00 | -| 3vilson | [V0.1_Skirt_Holes](3vilson/V0.1_Skirt_Holes) | Skirt with Access Holes from the bottom | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [V0.1_Skirt_Inlet](3vilson/V0.1_Skirt_Inlet) | Skirt with C14 inlet + New feet to screw into | V0.2 | 2023-07-13T14:30:27+00:00 | -| 42bios | [Corner panel clip w. cable](42bios/corner_panel_clip_cable) | Corner panel clip with an internal cable path. | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Exhaust filter housing - side...](42bios/exhaust_filter_housing_side) | Exhaust filter housing with the G1-8 "thread on the side. | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [relay mount](42bios/relay_mount) | relay-mount for 2x 2 channel relay modules. | V2.4 | 2023-07-13T14:30:27+00:00 | -| ademuri | [Lights, Camera, Voron](ademuri/Lights_Camera_Voron) | A mount for LED strips and Picam for the V0.1 | V0.2 | 2023-07-13T14:30:27+00:00 | -| aeresov | [cable tie DIN mount](aeresov/cable_tie_DIN_mount) | A bracket for cable ties to route cables across DIN rails. | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [MeanWell UHP-xxx DIN mount](aeresov/MeanWell_UHP_DIN_mount) | A bracket for MeanWell UHP series PSU (200, 350 and 500) to mount... | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Raspberry Pi DIN mount](aeresov/Raspberry_Pi_DIN_mount) | A bracket for Raspberry Pi 3/4 to mount it onto DIN rail, along or... | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [SKR 1.3/1.4 DIN mount](aeresov/SKR_DIN_mount) | A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or... | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [TL filament sensor bracket](aeresov/TL_filament_sensor_bracket) | A bracket for TL filament sensor to mount near stock spool holder. | V2.4 | 2023-07-15T11:51:22+00:00 | -| Akio | [Hidden cable routing z belt cover](Akio/cable_routing_z_belt_cover) | Z belt covers that allow hidden cable routing. | V2.4 | 2023-12-21T00:45:44+00:00 | -| al3ph | [Analog Timer Mount](al3ph/analog_timer_mount) | A skirt mount for analog timer | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [Filament Runout Sensor](al3ph/filament_runout) | A simple filament runout sensor | V0.2, V1.8, V2.4, VSW | 2023-07-13T14:30:27+00:00 | -| | [LED Mount](al3ph/led_mount) | A mount for 10mm LED WS2812 strips | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [PL05 Sensor Mount](al3ph/pl05_mount) | A mount PL05 inductive sensor | V0.2 | 2023-07-13T14:30:27+00:00 | -| alanho | [BTT PITFT50 v2 Mount](alanho/BTT_PITFT50_v2_Mount) | A mount for the BTT PITFT50 v2 Touch Display | V2.4 | 2023-10-24T08:48:08+00:00 | -| albert | [IKEA Dioder Led Mount](albert/IKEA_Dioder_Led_Mount) | A mount for the IKEA Dioder LED strip | V2.4 | 2023-12-21T00:45:44+00:00 | -| AlexanderT-Moss | [270 Clamping Hinges](AlexanderT-Moss/270-Clamping-Hinges) | Simple 270 degree hinges that clamp to the front panels instead of... | V2.4 | 2023-07-14T13:24:54+00:00 | -| Andre | [Mini Afterburner ADXL345 Mount](Andre/Mini_Afterburner_ADXL345_Mount) | Mount for an AXDL345 on the Mini Afterburner | V0.2 | 2023-07-14T13:24:54+00:00 | -| | [Mini Afterburner Strain Relief](Andre/Mini_Afterburner_Strain_Relief) | A replacement strain relief for the Mini Afterburner toolhead | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [Revo Nozzle Skirt](Andre/Revo_Nozzle_Skirt_Trident) | A Revo nozzle box hidden in a Trident skirt. | VT | 2023-10-24T11:32:29+00:00 | -| | [V0 Neopixel Front Bed Mount](Andre/V0_Neopixel_Front_Bed_Mount) | A replacement Front Bed Mount with room for a neopixel or dotstar... | V0.2 | 2023-07-14T13:24:54+00:00 | -| antoinecellerier | [DS18B20 Sensor Mount](antoinecellerier/ds18b20-sensor-mount) | DS18B20 temperature sensor mount | V0.2 | 2023-07-15T11:51:22+00:00 | -| ardichoke | [V0 Long Thumb Nut](ardichoke/v0-long-thumb-nut) | Taller thumb nuts for V0 bed | V0.2 | 2023-07-15T11:51:22+00:00 | -| arkeet | [Dial test indicator mount](arkeet/dti-mount) | A toolhead mount for a dial test indicator, where the tip is... | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Magnetic hotend fan cover](arkeet/magnet-fan-cover) | A replacement hotend fan cover, held with magnets instead of screws. | V1.8, V2.4, VSW | 2023-07-13T14:30:27+00:00 | -| | [MGN12 X-axis](arkeet/mgn12) | Replaces the dual MGN9H rails with a single MGN12H. | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [V0 DC inlet](arkeet/v0-dc-inlet) | Skirt inlet for external 24V DC power supply. | V0.2 | 2023-07-13T14:30:27+00:00 | -| aTinyShellScript | [RS PSU DIN Bracket](aTinyShellScript/RS_PSU_DIN_Brackets) | DIN brackets for MeanWell RS PSUs with 80mm spacing. | V2.4 | 2023-07-15T11:51:22+00:00 | -| AVieira | [Universal_Phone_Mount](AVieira/Universal_Phone_Mount) | This mod allows the use of different smartphones or possibly... | V2.4r2 | 2023-12-27T15:53:59+00:00 | -| baccula | [Revo Nozzle Holder for v2.4 350](baccula/revo_skirt_nozzle_holder) | A remix of Andre's design allowing for skirt storage of 4 E3D Revo... | V2.4 | 2023-07-13T14:30:27+00:00 | -| Backenfutter | [Mount for Electreeks Camera](Backenfutter/Mount_for_Electreeks_Camera) | This Mod is a simple "One Piece" mount for the popular Electreeks... | V2.4 | 2023-07-13T14:30:27+00:00 | -| Badnoob | [AB-BN Afterburner mod (5015)](Badnoob/AB-BN) | Improved Afterburner with 5015 fan | V1.8, V2.4, VSW, VT | 2023-07-14T13:24:54+00:00 | -| | [AB-BN for Stock Afterburner (4020)](Badnoob/ABBN_for_Stock) | Improved Dragon and Rapido toolhead for stock Afterburner with 4020... | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | -| | [Precision AB Drive](Badnoob/Precision_AB_Drive) | Changes the gearing for the AB drives to improve both resolution... | V2.4 | 2023-07-14T13:24:54+00:00 | -| Baltojikale | [LoudOwl aka Stabby](Baltojikale/LoudOwl_aka_Stabby) | Alternative dual 5015 part cooling fan toolhead for Afterburner | V1.8, V2.4, VSW | 2023-07-14T13:24:54+00:00 | -| beaugalbraith | [Nova Printhead](beaugalbraith/Nova_Printhead) | Use Nova Hotend with Afterburner | V2.4 | 2023-07-13T14:30:27+00:00 | -| BladeScraper-Designs | [CornerPanel_SpoolHolder](BladeScraper-Designs/CornerPanel_SpoolHolder) | A better supported Spool Holder that mounts to a modified corner... | V0.2 | 2023-07-14T13:24:54+00:00 | -| | [Horizontal Spool Holder](BladeScraper-Designs/Horizontal-Spool-Holder) | Based on the stock holder but mounts to the horizontal extrusions. | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Microswitch Pod With Connector](BladeScraper-Designs/Microswitch_Pod_With_Conector) | Microswitch pod with JST-XH 4-pin connector | V2.4 | 2023-07-13T14:30:27+00:00 | -| Blamm | [LRS-100 DIN mount](Blamm/lrs-100) | DIN rail mount for an extra LRS-100 Power Supply | V1.8, V2.4, VT | 2023-07-13T14:30:27+00:00 | -| BlueBear | [Bowden Fence](BlueBear/Bowden_Fence) | A little "fence" to hold the tubes away from the belts. | V0.2 | 2023-07-14T13:24:54+00:00 | -| | [Deck Panel Backpack](BlueBear/Deck_Panel_Backpack) | A mounting alternative if you don't want to drill your deck panel | V0.2 | 2023-07-14T13:24:54+00:00 | -| | [Clippable Wago 221 Mounts](BlueBear/Wago_221_mount) | Mounts for Wago 221 to screw or clip-in on 1515 extrusions | V0.2 | 2023-07-14T13:24:54+00:00 | -| | [Ziptie Mount](BlueBear/Ziptie_Mount) | Clippable Ziptie hooks for 1515 extrusions | V0.2 | 2023-07-13T14:30:27+00:00 | -| bobbleheed | [Filament Runout Sensor](bobbleheed/Filament_Runout) | Filament runout sensor that replaces the stock bowden retainer | V1.8, V2.4, VT | 2023-07-15T11:51:22+00:00 | -| | [Magnetic Panels](bobbleheed/Magnetic_Panels) | Magnetic clips to allow for easy removal and installation of panels | V2.4 | 2023-07-13T14:30:27+00:00 | -| Boingomw | [Wago mount](Boingomw/Wago_mount) | Smaller 5 port Wago mount that fits parallel to the support rails | V2.4 | 2023-07-14T13:24:54+00:00 | -| Bondtech | [Mini-After-LGX-Lite](Bondtech/Mini-After-LGX-Lite) | LGX Lite Toolhead Setup For Voron V0.1. | V0.2 | 2023-07-14T13:24:54+00:00 | -| btp | [Galileo chain mount (befenybay)](btp/Galileo_Switchwire_Chain_Mount) | Modified chain mount position to cater for difference with Galileo... | VSW | 2023-12-21T00:45:44+00:00 | -| buzzdalf | [v1.8/2.4 Afterburner connector...](buzzdalf/connector_cover) | v1.8/2.4 Connector cover for 42STH20-1004AS | V1.8, V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Ender 3 Switchwire Taller Z Mod](buzzdalf/ender_switchwire_taller_z) | Taller Z Mod | VSW | 2023-07-15T11:51:22+00:00 | -| | [Ender 3 Switchwire Y Tensioner Mod](buzzdalf/ytension) | Y Tension Mod | VSW | 2023-07-15T11:51:22+00:00 | -| ByteChild | [2-Channel Relay DIN Rail Bracket](ByteChild/2_Channel_Relay_DIN_Rail_Bracket) | DIN Rail mounting bracket for an 2-Channel-Relay | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [ESP32 DIN Rail Bracket](ByteChild/ESP32_DIN_Rail_Bracket) | DIN rail mounting bracket for an ESP32 | V2.4 | 2023-07-13T14:30:27+00:00 | -| bythorsthunder | [MGN9 Backers Idlers](bythorsthunder/MGN9_Backers) | New idler uppers for MGN9 Extrusion backers | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Stealthburner Rapido UHF](bythorsthunder/Stealthburner_Rapido_Uhf) | Stealthburner mod for Rapido UHF | V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | -| CannedBass | [PITFT50 45-degree mount](CannedBass/PITFT50_45_degree_mount) | Mount that puts the screen at a 45-degree angle for more vertical... | V2.4, VT | 2023-07-13T14:30:27+00:00 | -| | [Trident Bed Fans](CannedBass/Trident_Bed_Fans) | Bed fans for Trident | VT | 2023-07-13T14:30:27+00:00 | -| Ch4rlesB | [V0 Handles Slim](Ch4rlesB/V0_Handles_Slim) | Simple and slim handles for the V0 | V0.2 | 2023-07-14T13:24:54+00:00 | -| ChenTheDesignMaker | [Z Belt Clip](ChenTheDesignMaker/Z_Belt_Clip) | Simple clip to keep extra Z belts clean and away from panels | V2.4 | 2023-07-14T13:24:54+00:00 | -| chirpy | [V0.1 Nozzle Wiper](chirpy/NozzleWiper) | Servo powered nozzle wiper and purge bucket | V0.2 | 2023-07-15T11:51:22+00:00 | -| | [Runout UnKlicky Sensor](chirpy/RunoutUnklicky) | Runout UnKlicky Sensor is a filament runout sensor with mounts for... | V0.2, V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | -| | [V0.1 Raised Tophat](chirpy/TipTophat) | Alternative Tophat design that uses stock panels and raises height... | V0.2 | 2023-07-15T11:51:22+00:00 | -| chri.kai.in | [20x20mm Profile Covers](chri.kai.in/20x20mm_Profile_Covers) | Provide overlapping and flush slot covers for 20x20mm slot6... | V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | -| | [Angry CAM USB](chri.kai.in/Angry_CAM_USB) | Housing for small USB camera module, allowing mounting to gantry or... | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Exhaust Adapter 100mm](chri.kai.in/Exhaust_Adapter_100mm) | Replace 60mm exhaust fan with 100mm ventilation system adapter | V1.8, V2.4, VT | 2023-07-15T11:51:22+00:00 | -| chrisrgonzales | [270° Front Panel Hinge](chrisrgonzales/270_degree_hinge) | Hinges that have 270° of swivel, parametric CAD included | V2.4 | 2023-07-15T11:51:22+00:00 | -| christophmueller | [Phaetus and Zodiac Dragonfly BMO...](christophmueller/Phaetus_Dragonfly_BMO_Afterburner) | Covers both the original Phaetus variant as well as the Zodiac one. | V1.8, V2.4, VSW | 2023-07-15T11:51:22+00:00 | -| claytono | [Voron 2.4 Extrusion Jig](claytono/2.4-extrusion-jig) | A jig help align extrusions to get a properly square frame | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Fysetc S6 V2 Mount](claytono/fysetc-s6-v2-mount) | DIN Mount for the Fysetc S6 V2 controller | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | -| | [V0 Zip Tie Skirts](claytono/v0-zip-tie-skirts) | V0 skirts with small loops added along the top to allow zip tyiing... | V0.2 | 2023-07-13T14:30:27+00:00 | -| clee | [Monster8 DIN Rail Mounts](clee/Monster8_heatsert_mount) | DIN mount for Makerbase Monster8 V1/V2 controller | V2.4, VT | 2023-07-15T11:51:22+00:00 | -| cmrny | [V0.1 Motor Panel Modification](cmrny/v01_motor_panel_no_rub) | V0.1 Motor panel modification to keep umbilical and bowden tube... | V0.2 | 2023-07-13T14:30:27+00:00 | -| conqueror433 | [Voron Parts Logo](conqueror433/Voron_Parts_Logo) | Voron Parts Logo for your back panels, 3D Print or Laser Cut | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Voron V0.1 Parts Logo](conqueror433/Voron_V0.1_Parts_Logo) | Voron Parts Logo for your V0 deck panel | V0.2 | 2023-07-15T11:51:22+00:00 | -| consibonsi | [Y-Mod SW 9mm](consibonsi/Y-Mod_SW_9mm) | 9mm Y belt mod for SW | VSW | 2023-07-13T14:30:27+00:00 | -| csch0 | [SW Fan Mount No Tape](csch0/SW_FanMount_No_Tape) | 60x20 Fan Mount for SW without tape | VSW | 2023-07-15T11:51:22+00:00 | -| d3nny | [Filtered Power Plug with...](d3nny/mains_plug_panel_for_RND_165-00057) | Filtered Power Plug for RND 165-00057 and CAT6-Plug | V2.4 | 2023-07-13T14:30:27+00:00 | -| D4rkCelerity | [Raspberry Pi Zero Bracket](D4rkCelerity/Raspberry_Pi_Zero_Bracket) | Modified version of Trident RPi bracket to fit the smaller RPi Zero | V0.2, V1.8, V2.4, VT | 2023-07-13T14:30:27+00:00 | -| DaGlo | [V0.1 Duet 2 Wifi mounting brackets](DaGlo/Voron_V0_Duet_2_WiFi_Mounting_Brackets) | Voron 0.1 Mounting brackets with/without RPi 4 | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [Voron V0 Mean Well power supply...](DaGlo/Voron_V0_MW_PS_Bracket) | Voron V0 Mean Well power supply bracket (Funssor Kit) | V0.2 | 2023-07-14T13:24:54+00:00 | -| | [Voron V0 SSR Mount](DaGlo/Voron_V0_SSR_Mount) | Voron V0 SSR Mount for the bottom | V0.2 | 2023-07-14T13:24:54+00:00 | -| DaGrooch13 | [Tophat Exhaust Filter V0](DaGrooch13/Tophat_Exhaust_Filter) | Activated charcoal exhaust filter with HEPA that replaces the rear... | V0.2 | 2023-07-14T13:24:54+00:00 | -| Dan88 | [V0 one-part Skirts](Dan88/V0skirt) | One part Skirts for the V0 | V0.2 | 2023-07-13T14:30:27+00:00 | -| dankeeling | [Creative Live! Camera Mount](dankeeling/CreativeLiveCameraMount) | A mod to provide a mount for the Creative Live! Camera that mounts... | V2.4r2, VT | 2023-12-30T15:53:01+00:00 | -| DaStivi | [The Cephalopod limb (BTT Octopus...](DaStivi/the_Cephalopods_limb) | An alternative Din rail mount for BTT Octopus (PRO) boards | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | -| Daten | [Revo hotend skirt case](Daten/Voron_2.4_Revo_Nozzle_Holder) | A skirt case for the Revo hotends to reside R1 and R2 | V2.4 | 2023-07-14T13:24:54+00:00 | -| davidauvergne | [Center_cable_management_duct](davidauvergne/Center_cable_management_duct) | Mod for a centered cable management | V2.4 | 2023-07-15T11:51:22+00:00 | -| DC67 | [Plug Panel Mod for Schaffner...](DC67/plug_panel_schaffner) | A modified plug panel for the Power Entry Connector Schaffner... | V2.4 | 2023-07-14T13:24:54+00:00 | -| deepfriedheroin | [v0 Wago Bed Mounts](deepfriedheroin/v0_bed_wagos) | Easy to install Wago mounts for the v0 | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [v0 Power Wagos](deepfriedheroin/v0_power_wagos) | Easy to install Wago mounts for v0 mains | V0.2 | 2023-12-21T00:45:44+00:00 | -| | [V2 Bed Wagos](deepfriedheroin/v2_bed_wagos) | Wire management for the v2 bed | V2.4 | 2023-07-13T14:30:27+00:00 | -| dePrintinator | [HEPA Exhaust](dePrintinator/HEPA_Filter_Exhaust) | HEPA filter chamber exhaust replacement. | V1.8, V2.4, VT | 2023-07-15T11:51:22+00:00 | -| DerekBackus | [LED Strip Holder](DerekBackus/LED_Holder) | Simple bracket to mount an LED strip | | 2023-07-13T14:30:27+00:00 | -| | [Trident Right Skirt Switch](DerekBackus/Right_Skirt_Switch) | Moves power switch to right front skirt on the Trident | | 2023-07-13T14:30:27+00:00 | -| Derpimus | [V0.1 Block Handle](Derpimus/Block_handle_v0.1) | V0.1 Block Style Handle | V0.2 | 2023-07-14T13:24:54+00:00 | -| DorjeDorf | [Duet 3 3HC Din Bracket](DorjeDorf/Duet_3_3HC_Din_Bracket) | V2.4 Duet 3 3HC Din Bracket | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Duet 3 6HC Din Bracket](DorjeDorf/Duet_3_6HC_Din_Bracket) | V2.4 Duet 3 6HC Din Bracket | V2.4 | 2023-07-13T14:30:27+00:00 | -| doubletrouble | [V0 Skirt Mod](doubletrouble/V0_Skirt_Mod) | V0 Skirt Mod | V0.2 | 2023-07-13T14:30:27+00:00 | -| Dr-Info | [Corner Cable Cover with Drop Holes](Dr-Info/corner_cable_cover_with_drop_down_holes) | Corner cable cover around Z-idler with drop holes near z frame and... | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [V2.4 Rear Skirt Mod for Z-Drive...](Dr-Info/V2.4r2_Z-Drive_Motor_Tensioner_Mod_Rear_Skirts) | This mod enables the you to utilize the rear skirts, power and... | V2.4 | 2023-07-14T13:24:54+00:00 | -| DrGhetto | [Ghetto Panels](DrGhetto/GhettoPanels) | Printed panels for the Voron Zero | V0.2 | 2023-07-14T13:24:54+00:00 | -| eamars | [Stealthburner (RC1) Dragon...](eamars/stealthburner_crazy_dragon_toolhead) | The Stealthburner toolhead mount for Mellow Crazy, TriangleLab... | V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | -| eddie | [LED Bar Clip](eddie/LED_Bar_Clip) | Modular LED Clip for mounting LED Strip to 2020 Extrusions | V1.8, V2.4, VT | 2023-07-13T14:30:27+00:00 | -| | [V1.8 12mm Z Mod](eddie/V1.8_12mm_Z_Mod) | Add V1.8 option for 12mm Z rods | V1.8 | 2023-12-21T00:45:44+00:00 | -| edwardyeeks | [Tridentified V2.4 Power Inlet](edwardyeeks/Tridentified_V2.4_Power_Inlet) | Trident style side power inlet for V2.4 using Z Drive Motor... | V2.4 | 2023-07-13T14:30:27+00:00 | -| elcrni | [Trident Internal Spool Holder](elcrni/Trident_Internal_Spool_Holder) | Internal spool holder for 300 and 350 Tridents. Supports full size... | VT | 2023-12-21T00:45:44+00:00 | -| | [V.24/Trident Spool Holder](elcrni/V2.4-Trident-Spool-Holders) | Spool holder that mounts on top for "too close to the wall" printers | V1.8, V2.4, VT | 2023-12-21T14:04:19+00:00 | -| Electroleon | [U2C Mounting](Electroleon/U2C_Mounting) | Bigtreetech U2C CAN Interface mounting bracket | V0.2, V1.8, V2.4, VT | 2023-07-13T14:30:27+00:00 | -| Ellis | [15x15 Drag Chain End](Ellis/15x15_Drag_Chain_End) | 15x15 drag chain end piece | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Badge Retractor Mount](Ellis/Badge_Retractor_Mount) | Extrusion mount for badge retractor to keep bowden tube out of the... | V2.4 | 2023-12-21T00:45:44+00:00 | -| | [Bed Fans](Ellis/Bed_Fans) | Bed fan control macros and 5015 bed fan mounts | V2.4 | 2023-07-14T13:24:54+00:00 | -| | [Short Z Joints](Ellis/Short_Z_Joints) | Shorter Z joints for the v2.4 | V2.4 | 2023-10-24T11:32:29+00:00 | -| | [Single MGN9H Carriage](Ellis/Single_MGN9H_Carriage) | Single MGN9H toolhead carriage with toolhead x endstop support (for... | V1.8, V2.4 | 2023-07-14T13:24:54+00:00 | -| ElPoPo | [Removable Doors](ElPoPo/RemovableDoors) | New hinge to easily remove the door and have a wide opening V2.x | V2.4 | 2023-07-14T13:24:54+00:00 | -| EmJay276 | [Stealthburner Phaetus Dragon UHF...](EmJay276/stealthburner_dragon_UHF_toolhead) | This mod adds a tool cartridge for the Phaetus Dragon UHF and... | V2.4, VT | 2023-12-26T23:18:46+00:00 | -| Empusas | [Mounts for BTT Filament Motion...](Empusas/BTT_Filament_Motion_Sensor_Mount) | Mounts for Big Tree Tech Smart Filament Motion Sensor | V0.2, V1.8, V2.4, VSW | 2023-07-14T13:24:54+00:00 | -| | [Power Skirt 2.x FN284-10-06](Empusas/PowerSkirt_FN284-10-06) | Power Skirt for Schaffner FN284-10-06 V2.x | V2.4 | 2023-07-14T13:24:54+00:00 | -| | [Mounts for Terminal Blocks NC933...](Empusas/Terminal_Blocks_NC933_SPL-62) | Mounts for Terminal Blocks NC933 and SPL-62 from AliExpress | V2.4 | 2023-07-14T13:24:54+00:00 | -| evandepol | [Crydom GN Terminal Guard](evandepol/Crydom-GN-Guard) | A simple safety guard for the terminals on a Crydom GN SSR | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Voron 2.4 cable clamps](evandepol/Voron2.4-Cable-clamps) | A set of 2020-mounted cable guards to organize and dress the wiring... | V2.4 | 2023-07-15T11:51:22+00:00 | -| falo | [LGX Lite CAN Side Mount](falo/lgx_lite_side_can) | A side mounting for a CAN board (Huvud/SHT42) to the LGX Lite | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | -| | [Magnetic Exhaust Grill Cover](falo/magnetic_grill_cover) | A magnetic cover to seal the filtered exhaust | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Toolhead PCB to CAN Mount Adaptor](falo/toolhead_pcb_to_can) | A mount to enable side mounting of a CAN board (Huvud/SHT42) in... | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | -| Ferdi360 | [2.4 Bedfan Backplates](Ferdi360/2.4_Bedfan_Backplates) | Backplates for your Voron 2.4 that block hot air out of your... | V2.4r2 | 2024-01-01T15:20:27+00:00 | -| Fiction | [C270 mount](Fiction/C270_mount) | Logitech C270 webcam front-centre mount | V2.4, VT | 2023-07-14T13:24:54+00:00 | -| | [Crossrail](Fiction/Crossrail) | Across-the-rails LRS-200-24 or RSP-200-24 mount using DRP-03 brackets | V2.4, VT | 2023-07-14T13:24:54+00:00 | -| | [Exhaust_cover](Fiction/Exhaust_cover) | Cover for exhaust cutout in back panel | V2.4, VT | 2023-07-14T13:24:54+00:00 | -| | [Exhaust_cover_SFS](Fiction/Exhaust_cover_SFS) | Exhaust cover and BTT Smart Filament Sensor mount | V2.4, VT | 2023-07-14T13:24:54+00:00 | -| | [LGX Lite toolhead PCB mount](Fiction/LGX_Lite_toolhead_PCB_mount) | Mount for Hartk's toolhead PCB(s) for LGX Lite | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | -| filotto78 | [6mm slot cover](filotto78/6mm_slot_cover) | Simple cover for extrusion with 6mm slot width | V2.4 | 2023-07-13T14:30:27+00:00 | -| frankaf | [Euclid Probe Carriage](frankaf/mgn12-euclid) | A MGN-12 carriage with an inset mount for a Euclid Probe | V1.8, V2.4, VT | 2023-07-17T22:40:39+00:00 | -| FreeformFez | [V1.8 Filtered Power Inlet](FreeformFez/FilteredPower) | V1.6 Filtered Inlet and Rocker Switch for V1.8 | V1.8 | 2023-12-21T00:45:44+00:00 | -| GadgetAngel | [Bed Support Extrusions Alignment...](GadgetAngel/Bed_Support_Alignment_Tools) | The bed support alignment tools will assist in helping align the... | V2.4 | 2023-07-14T13:24:54+00:00 | -| | [Cricut Voron Logos](GadgetAngel/Cricut_Voron_Logos) | For any cutting machines or machines that rely on vector graphics... | V0.2, V2.4, VSW, VT | 2023-10-24T11:32:29+00:00 | -| Galvanic | [Bowden Tube Guide](Galvanic/Bowden_Tube_Guide) | Bowden tube guide and CANBUS wire support | V1.8, V2.4, VT | 2023-07-14T13:24:54+00:00 | -| gamebofh | [Laser cut door panels](gamebofh/door-panels) | Files to allow you to create laser cut door panels with some... | VSW | 2023-07-15T11:51:22+00:00 | -| gauravmm | [Crazy Mozzie HF toolhead SB+CW2](gauravmm/crazy_mozzie_cw2) | Toolhead for Crazy Mozzie HF, compatible with Stealthburner and... | V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | -| gen2eng | [Switchwire LED wire pass through](gen2eng/z_carriage_stop_pass_through) | Z Carriage Stop modification that makes pass through of wires for... | VSW | 2023-07-15T11:51:22+00:00 | -| geoffreyyoung | [Dual Rail Installation Guide](geoffreyyoung/dual_rail_guide) | Rail installation guide that also works for the 2.4 dual rail... | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [LGX Info, Links, and Models](geoffreyyoung/lgx) | Useful information and models for using the Bondtech LGX extruder... | V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | -| gerritwellen | [Manta M8P Mount](gerritwellen/manta-m8p-bracket) | Mounting Bracket for BTT Manta M8P | V2.4, VT | 2023-07-13T14:30:27+00:00 | -| GiulianoM | [Fly F407ZG Mount](GiulianoM/FlyF407ZG) | Mount for the Fly F407ZG: https://github.com/FLYmaker/FLYF407ZG | V2.4 | 2023-07-14T13:24:54+00:00 | -| Gizzle | [Ender 3 and Ender 3 Pro...](Gizzle/ender-3_pro_switchwire) | Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics... | VSW | 2023-12-21T00:45:44+00:00 | -| golas | [V0.1 Extended tophat hinge](golas/v0-extended-tophat-hinge) | Extended tophat for v0.1 with hinges (integrated or screwed ones). | V0.2 | 2023-07-15T11:51:22+00:00 | -| | [V0.1 Trident skirt remix with...](golas/v0-trident-skirt-mix) | Trident style v0.1 skirt mix with 12864 Mini Lcd on front or plain... | V0.2 | 2023-07-15T11:51:22+00:00 | -| GSL12 | [Pocketwatch Nema 17](GSL12/pocketwatch_nema17) | Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe... | | 2023-07-13T14:30:27+00:00 | -| hartk1213 | [Voron0.2 2.8 Waveshare Display](hartk1213/Voron0.2_2.8_WaveshareDisplay) | 2.8 Waveshare display for V0.2 | V0.2 | 2023-07-15T11:51:22+00:00 | -| | [Voron0.2 Rear Keystone Skirt](hartk1213/Voron0.2_Rear_Keystone_Skirt) | Added keystone slot on rear skirt for V0.2 | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [Voron0 C14Inlet](hartk1213/Voron0_C14Inlet) | Added a new Power inlet that uses a Fused C14 plug and switch that... | V0.1 | 2023-12-21T00:45:44+00:00 | -| | [Voron0 deck panel](hartk1213/Voron0_deck_panel_with_logo_and_VORON0) | Used @Kruppes blank deck panel to add the logo as well as the name... | V0.1 | 2023-10-24T11:32:29+00:00 | -| | [Voron0 display dualcolor](hartk1213/Voron0_display_dualcolor) | Added a dual color file for the Voron Display Front housing | V0.1 | 2023-07-15T11:51:22+00:00 | -| | [Voron0 ExtendedLegs](hartk1213/Voron0_ExtendedLegs) | New extended legs to raise the printer up a tiny bit more | V0.1 | 2023-07-15T11:51:22+00:00 | -| | [Voron0 ExtrusionSkirt](hartk1213/Voron0_ExtrusionSkirt) | Created a new skirt design that uses 50mm extrusions as legs and it... | V0.1 | 2023-07-15T11:51:22+00:00 | -| | [Voron0 Hinged Top Hat](hartk1213/Voron0_Hinged_Top_Hat) | Created a new hinged top hat design for the V0 so it can fold away... | V0.1 | 2023-07-15T11:51:22+00:00 | -| | [Voron0 MGN9C X Axis](hartk1213/Voron0_MGN9C_X_Axis) | This mod, replaces the stock MGN7H for MGN9C on the V0 | V0.1 | 2023-07-15T11:51:22+00:00 | -| | [Voron2.4 GE5C](hartk1213/Voron2.4_GE5C) | This mod replaces the stack of printed z joints with a metal... | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Voron2.4 SexBolt ZEndstop](hartk1213/Voron2.4_SexBolt_ZEndstop) | This mod replaces stock V2 Z endstop with a different style | V2.4, VT | 2023-07-15T11:51:22+00:00 | -| | [Voron2.4 and Trident Pins Mod](hartk1213/Voron2.4_Trident_Pins_Mod) | This mod replaces all the M5 screws for all idlers/pulleys/bearings... | V2.4, VT | 2023-07-15T11:51:22+00:00 | -| | [Voron2.4 Y Endstop Relocation](hartk1213/Voron2.4_Y_Endstop_Relocation) | This mod relocates the Y endstop to the top A drive piece | V2.4 | 2023-07-15T11:51:22+00:00 | -| henrikssn | [Parametric Spool Holder](henrikssn/parametric_spool_holder) | Spool holder where the length is a parameter. | V1.8, V2.4, VT | 2023-07-13T14:30:27+00:00 | -| | [Plug Panel Mod for Generic...](henrikssn/plug_panel_generic) | v2.4 plug panel for generic unfiltered modules with 66mm x 27mm... | V2.4 | 2023-07-13T14:30:27+00:00 | -| hergtoler | [Exhaust Housing for 120mm Fan...](hergtoler/exhaust_120mm_duct) | v2.4 Exhaust Housing for 120mm Fan and 4in Duct | V2.4 | 2023-07-15T11:51:22+00:00 | -| hernsl | [Bottom Panel Mag Clip](hernsl/bottom_panel_mag_clip) | v2.4 magnetic clips to retain bottom panel | V2.4 | 2023-07-15T11:51:22+00:00 | -| hhammarstrand | [Afterburner connector cover for...](hhammarstrand/afterburner_connector_cover_42STH20-1004AS) | Connector cover for 42STH20-1004AS | VSW | 2023-10-24T11:32:29+00:00 | -| hijax_pl | [Corner panel clip](hijax_pl/corner_panel_clip) | V2 panel corner frames using 3-way L brackets in the corners | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Din Rail mount](hijax_pl/din_rail_mount) | Adapter to attach DIN Rail to 2020 extrusion. | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Controler Board adapters](hijax_pl/ender_compatible_controller_mount) | DIN (rotated) and legacy adapters for boards like SKR mini E3. | V2.4 | 2023-07-13T14:30:27+00:00 | -| Hobson318 | [Belt Tension Wrench](Hobson318/Belt_Tension_Wrench) | Wrench for easier turning of the belt tension knobs on V0.1 | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [Klipper Expander Mount](Hobson318/Klipper_Expander_Mount) | Mounting brackets for the klipper expander using vhb tape or... | V0.2, V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | -| hoschi | [FYSETC Spider DIN Rail Mount](hoschi/FYSETC_Spider_DIN_Mount) | DIN rail mount for FYSETC Spider | V2.4 | 2023-07-15T11:51:22+00:00 | -| hymness1 | [10x11mm chain VSW](hymness1/10x11mm_chain_VSW) | Printable and openable 10x11mm chain | V0.2, VSW | 2023-07-13T14:30:27+00:00 | -| | [Quickdraw probe Voron Switchwire](hymness1/Quickdraw_probe_Voron_Switchwire) | Detachable magnetic probe with docking system for VSW | VSW | 2023-07-15T11:51:22+00:00 | -| Iakabos | [c920 Mount](Iakabos/C920_mount) | Slim mount for logitech c920 webcam | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | -| | [V0 beltchains](Iakabos/V0_beltchain) | Modified beltchain parts for V0 Z cables | V0.2 | 2023-07-13T14:30:27+00:00 | -| iblue | [V0.1 Tophat Extractor](iblue/TophatExtractor) | Tophat Extractor for the Voron V0.1 with activated charcoal and... | V0.2 | 2023-07-13T14:30:27+00:00 | -| jangrewe | [Bitter USB Cam](jangrewe/Bitter_USB_Cam) | Modification of the "Angry Cam USB v2.0" webcam mount for 1515... | V0 | 2023-10-24T08:41:48+00:00 | -| jappaj | [V0.1 FanSaver](jappaj/FanSaver) | A printable fix for overheating V0.1 blower fans | V0.2 | 2023-07-15T11:51:22+00:00 | -| jasonc | [V2.4 Z-Idler Shoulder Bolt Mod](jasonc/Z_Idler_Shoulder_Bolt) | Modification to the idler carriers to accept a 25mm shoulder bolt.... | V2.4 | 2023-07-15T11:51:22+00:00 | -| Jasrags | [Feed slot with filament pass-...](Jasrags/sw_fee_slot_filament_passthrough) | A feed slot with a filament pass-through | VSW | 2023-07-13T14:30:27+00:00 | -| jatson | [Plug panel mod for Schurter...](jatson/plug_panel_schurter) | A modified plug panel for Voron 2.4r1 with Schurter CD44.1101.151... | V2.4 | 2023-07-13T14:30:27+00:00 | -| jaysuk | [4.3 Fly Screen Mount](jaysuk/4.3_fly_screen_mount) | A mount for a 4.3" Fly Screen | V0, V0.1 | 2023-07-15T11:51:22+00:00 | -| JD | [V2.4 Filament runout sensor](JD/RefillPlease) | Replace the 2.4 stock bowden tube holder and add a filament runout... | V1.8, V2.4, VT | 2023-07-14T13:24:54+00:00 | -| jeoje | [4.3" Touchscreen Mount](jeoje/4.3_Inch_Touchscreen_Mount) | Mounts a [Waveshare 4.3inch Capacitive Touch... | V2.4, VSW | 2023-07-13T14:30:27+00:00 | -| | [Molex MLX and Microfit 3.0 Bed...](jeoje/Molex_MLX_Microfit_Bed_Connector_Mount) | Solid mount your bed connectors | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Sturdy Handles](jeoje/Sturdy_Handles) | Modified v2.2 handles with no panel rest and with 4 anchor points | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [V2.4 Z Chain Guide with...](jeoje/Z_Chain_Guide_Thermistor_Mount) | Modifies the Z chain guide to hold a chamber thermistor | V2.4 | 2023-07-15T11:51:22+00:00 | -| JeremyRuhland | [V2.4 Plug Panel Generic Combo](JeremyRuhland/V2.4_Plug_Panel_Generic_Combo) | Skirt power panel for generic amazon plug/switch/fuse combo module,... | V2.4 | 2023-07-14T13:24:54+00:00 | -| jgehrig | [V0 LCD Touchscreen Skirt](jgehrig/v0_lcdskirt) | 3.2" LCD Touch Screen Skirt | V0.2 | 2023-07-15T11:51:22+00:00 | -| JJFX | [V2.4 CR Touch Snap Mount](JJFX/CRTouch_Snap_Mount) | Mount to replace v2.4 (MGN9) probe with a Creality CR Touch | V2.4 | 2023-07-14T13:24:54+00:00 | -| JNP | [Back Door](JNP/Back-Door) | Door for easy hardware access | V0.2 | 2023-07-14T13:24:54+00:00 | -| | [Deck Panel](JNP/Deck_Panel_Rear) | Covers the hotbed cables | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [Drawer](JNP/Drawer) | Drawer in four different versions | V0.2 | 2023-07-14T13:24:54+00:00 | -| | [Front Door](JNP/Front-Door) | Door in a frame | V0.2 | 2023-12-21T00:45:44+00:00 | -| | [Hepa Filter](JNP/HEPA-Filter) | Filter case with fan´s | V0.2 | 2023-12-21T00:45:44+00:00 | -| | [Mid Panel](JNP/Mid-Panel) | Panel for SKR1.4/1.4 or SKR E3 mini mount | V0.2 | 2023-07-14T13:24:54+00:00 | -| | [Neopixel Case](JNP/Neopixel-Y_Rails) | mounting for Neopixel strip with 8 LED´s | V0.2 | 2023-10-24T11:32:29+00:00 | -| | [Side Panels](JNP/Side-Panels) | Panels with intergrated hinge | V0.2 | 2023-12-21T00:45:44+00:00 | -| johanncc | [Raspberry Pi Camera Mount](johanncc/Raspberry_Pi_Camera_Mount) | Low profile raspberry pi camera mount | V0.2 | 2023-07-15T11:51:22+00:00 | -| Jon | [1515 LED Mount](Jon/1515_led_mount) | Snap in 1515 Led mount for WS2812B | V0.2 | 2023-07-14T13:24:54+00:00 | -| | [adxl345 skirt keystone](Jon/adxl345_skirt_keystone) | Skirt keystone for ADXL345 using Microfit 3.0 | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Z Cover for v0.1](Jon/V0.1_Z_Cover) | A cover to stop things from dropping down the Z motor and... | V0.1 | 2023-07-14T13:24:54+00:00 | -| joposter | [V0 Clippable LED Caselight](joposter/v0_clippable_ledmounts) | LED Case light for the V0 that clips into the extrusions | V0.2 | 2023-07-15T11:51:22+00:00 | -| JosAr | [Klicky Probe](JosAr/Klicky-Probe) | Microswitch based inductive probe replacement | V0.2, V1.8, V2.4, VT | 2023-12-21T00:45:44+00:00 | -| KenadyDwag44 | [Switchwire Lightbar](KenadyDwag44/sw_lightbar) | A LED lightbar for switchwire | VSW | 2023-07-13T14:30:27+00:00 | -| KevinAkaSam | [VEFACH](KevinAkaSam/VEFACH) | Voron Exhaust Filter Inserts for Activated Coal + Hepa | V2.4, VT | 2023-07-14T13:24:54+00:00 | -| khay | [V0 Micro Backplate](khay/micro_backplate) | Minimalistic backplate for cooler motors and electronics | V0.2 | 2023-07-15T11:51:22+00:00 | -| | [Fan for V2-200mm²](khay/V2-200_4020_Electronics_Fan) | Middle Skirt for V2-200mm² Electronics Compartment | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [3x Keystone PlugPanel](khay/V2_3x_Keystone_Plugpanel) | PlugPanel with Options for 3 Keystones | V2.4 | 2023-07-15T11:51:22+00:00 | -| KiloQubit | [Trident Schurter Inlet Skirt](KiloQubit/trident_schurter_power_inlet) | Trident inlet skirt for mounting a Schurter DD11.0124 or similar inlet | VT | 2023-07-14T13:24:54+00:00 | -| | [V0 Reverse Bowden Mount](KiloQubit/V0_reverse_bowden_mount) | V0 reverse bowden mount | V0.2 | 2023-07-14T13:24:54+00:00 | -| | [V2.4 Z Chain Mounts for 3 Hole...](KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts) | Z chain mounts for 3 hole generic chain | V2.4 | 2023-07-14T13:24:54+00:00 | -| kirby | [V0 Sherpa Mini Direct Drive Mod](kirby/v0_sherpa_mini_direct_drive) | A direct drive mod for the V0 using the Annex Sherpa Mini extruder | V0.2 | 2023-07-13T14:30:27+00:00 | -| Koios | [6mm Tempered Glass Mod](Koios/6mm_Glass) | Lock levers and rests for 6mm Tempered glass panels | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [C920 Low Profile Mount](Koios/C920_Mount) | Low profile mount for a C920 Webcam | V2.4 | 2023-07-14T13:24:54+00:00 | -| | [LED Bar Mounts](Koios/LED_Mounts) | Low profile mount for led bar lights | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [V0 C920 Tophat Mount](Koios/V0_C920_Tophat_Mount) | Mounting bracket for a Logitech C920 on the tophat | V0.2 | 2023-07-14T13:24:54+00:00 | -| Kosh42EFG | [Kirigami bed front](Kosh42EFG/kirigami_bed_front) | Printed bed front for kirigami folded metal bed mount with Voron logo. | V0.2 | 2023-07-13T14:30:27+00:00 | -| Kruppes | [Encosed Bottom](Kruppes/Closed_Bottom) | Modified printed parts and panel to fully enclose V0. | V0.2 | 2023-07-14T13:24:54+00:00 | -| | [V0 Printed Deck with inserts](Kruppes/Deck_Panel_inserts_logo) | Electronics Deck Panel using brass heat inserts. Optional with... | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [Belt Tension Meter](Kruppes/Tension_Meter) | Print in place tension meter to easily tighten multiple belts to... | V0.2, V1.8, V2.4, VSW | 2023-12-21T00:45:44+00:00 | -| Kyleisah | [CableGator Cable Comb](Kyleisah/CableGator) | A cable comb for simplifying and tidying wire harnesses for... | V0.2, V1.8, V2.4, VSW, VT | 2023-07-14T13:24:54+00:00 | -| lakai | [Bruag Skirts](lakai/Bruag_Skirts) | V2 350mm skirts inspired by Bruag Facades | V2.4 | 2023-07-13T14:30:27+00:00 | -| Le0n | [Magnetic panels with Magnet Inserts](Le0n/Magnetic_Panels_with_Magnet_Inserts) | Magnetic panel mounts with magnets inserted into frame slots. | V1.8, V2.4, VT | 2023-07-14T13:24:54+00:00 | -| leandromarceddu | [PowerSkirt](leandromarceddu/PowerSkirt) | Modified skirtpiece for a digital power monitor | V2.4 | 2023-07-13T14:30:27+00:00 | -| Liselotte111 | [Red Lizard K1 UHF toolhead](Liselotte111/Red_Lizard_K1_UHF) | SB toolhead for Red Lizard K1 UHF | V2, VT | 2023-12-23T00:44:28+00:00 | -| littleferris | [V0 c14 Skirt Inlet](littleferris/V0_Skirt_Inlet) | V0 C14 Skirt inlet | V0.2 | 2023-07-13T14:30:27+00:00 | -| LJ | [Scrubby](LJ/Scrubby) | Easy to use filament dust filter | V0.2, V1.8, V2.4, VSW, VT | 2023-07-14T13:24:54+00:00 | -| LoCoCNC | [3mm Top Hat Panels Clips](LoCoCNC/3mm_tophat_panel_parts) | Required to use the 3mm (1/8") thick top hat panels for V0.1 | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [MGN7H Shims](LoCoCNC/MGN7H_Shims) | Shims for making bearing cartridges coplanar | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [Mosquito PTFE 15mm Tube Cutting Jig](LoCoCNC/Mosquito_PTFE_Cutting_Jig) | Tool to precicely cut 15mm PTFE Tube | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [SSR Mounting Strap](LoCoCNC/ssr_strap) | Mounting Strap for SSR on 1515 Extrusions | V0.2 | 2023-07-14T13:24:54+00:00 | -| | [Strain Relief w/ 10 Pin Microfit](LoCoCNC/Strain_Relief_w_Microfit) | Strain Relief with 10 pin Microfit connector | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [V2.4 Bed Wiring Grommet](LoCoCNC/wire_grommets) | Safely capture your bed wires thru the bottom panel | V2.4 | 2023-07-13T14:30:27+00:00 | -| LoganFraser | [ComboInlet](LoganFraser/ComboInlet) | Skirt pieces for Trident, 2.4 and 2.4r2 for combo inlets in 2 sizes. | V2.4, VT | 2023-12-21T00:45:44+00:00 | -| | [HorseshoeSpoolHolder](LoganFraser/HorseshoeSpoolHolder) | Horseshoe Spool Holder - mounts internally for Trident, or... | V0.2, V1.8, V2.4, VT | 2023-07-14T13:24:54+00:00 | -| | [PiPlate](LoganFraser/PiPlate) | PiPlate - Raspberry Pi3,4 mounting plate and Skirt Mod for... | V2.4, VT | 2023-07-14T13:24:54+00:00 | -| | [Trident Inverted Electronics](LoganFraser/TridentInvertedElectronics) | Flip the Trident electronics bay for top access. | VT | 2023-07-13T14:30:27+00:00 | -| | [WagoMounts](LoganFraser/WagoMounts) | Wago Mounts for Din Rail or 2020 Extrusion mounting. | V2.4, VSW, VT | 2023-07-14T13:24:54+00:00 | -| Long | [Mantis Dual 5015 Toolhead](Long/Mantis_Dual_5015) | MGN12 Dual 5015 Toolhead for 2.4 & 1.8 | V1.8, V2.4 | 2023-12-21T00:45:44+00:00 | -| Lukas | [SSD1306 Case Front Cover](Lukas/SSD1306_Case_Front_Cover) | SSD1306 Mount replacement for Mini12864 | V2.4, VT | 2023-07-14T13:24:54+00:00 | -| Mac10goesBRRRT | [PiTFT Mount](Mac10goesBRRRT/BTT_PiTFT) | Mount for the BTT PiTFT Touchscreen | V2.4, VT | 2023-07-13T14:30:27+00:00 | -| madfabrications | [Vertical PSU Mount](madfabrications/Vertical_PSU_Mount) | Mounts the PSU vertically on the DIN rails | V2.4 | 2023-07-13T14:30:27+00:00 | -| madros | [V0 OLED-skirt](madros/V0_skirt_OLED) | V0 skirt with 0.96" OLED | V0.2 | 2023-07-15T11:51:22+00:00 | -| Majarspeed | [Hartk board mount galileo](Majarspeed/Hartk_Mount_Galileo) | It hangs stuff on your tool | V2.4 | 2023-07-14T13:24:54+00:00 | -| MakeALeft | [Switchwire Clean Center Grill](MakeALeft/Switchwire_Front_Grill) | Removed magnet holders on center panel for cleaner look | | 2023-07-13T14:30:27+00:00 | -| MapleLeafMakers | [Kirigami Stealth Bumper](MapleLeafMakers/Kirigami_Stealth_Bumper) | an RGB-Powered front-bed mount for the Voron V0 with Kirigami Bed... | V0 | 2023-12-31T15:37:53+00:00 | -| | [Matchstick Diffusers](MapleLeafMakers/Matchstick_Diffusers) | Mounts and Diffusers for the popular "on-a-matchstick" LEDs | V0 | 2023-12-30T19:41:58+00:00 | -| | [Modesty Mesh](MapleLeafMakers/Modesty_Mesh) | Customizable mesh inserts to hide your messy electronics compartment. | V0 | 2023-12-28T23:43:17+00:00 | -| | [Rainbow Serial Bumper](MapleLeafMakers/Rainbow_Serial_Bumper) | Just a little bit of extra bling for your Voron Trident | VT | 2023-12-29T17:37:31+00:00 | -| | [Stealth Handles](MapleLeafMakers/Stealth_Handles) | Stealthy and stylish handles for your V0 | V0.2 | 2023-12-27T16:27:29+00:00 | -| | [Umbilical Collar](MapleLeafMakers/Umbilical_Collar) | An adjustable umbilical collar for the stock motor panel on the V0 | V0 | 2023-12-27T15:57:10+00:00 | -| | [Upper Rear Bowden Inlet (URBI)](MapleLeafMakers/URBI) | A Reverse Bowden Inlet for the upper-rear panel of the Voron Zero... | V0 | 2023-12-28T23:17:07+00:00 | -| MasturMynd | [Stealth Zero](MasturMynd/V0.1-Stealth_Zero) | A low poly gantry with front tensioners and optional front mounted... | V0.1 | 2023-10-26T05:29:07+00:00 | -| | [2-Piece Z Tensioners](MasturMynd/V2-2-Piece_Z_Tensioners) | Splits the tensioners into two pieces, allowing the tensioner to be... | V2 | 2023-10-26T05:29:07+00:00 | -| MathematicalPotato | [V0.1 Belted Z Drive](MathematicalPotato/v0.1_belted_z_drive) | Conversion to a belted Z axis for the V0.1 adapted from... | V0.2 | 2023-07-14T13:24:54+00:00 | -| Maverick | [MiniSB_LGXL](Maverick/MiniSB_LGX_Lite) | A Bondtech LGX Lite variant of the MiniSB | V0.2, V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | -| | [MiniSB_Rapido](Maverick/MiniSB_Rapido) | Modified MiniSB to use a Rapido hotend | V0.2, V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | -| | [MiniSB_Sharkfin](Maverick/MiniSB_Sharkfin) | Modified MiniSB to use a Sharkfin Extruder | V0.2, V1.8, V2.4, VSW, VT | 2023-07-14T13:24:54+00:00 | -| | [V0.2 Stealth Skirts](Maverick/V0.2_Stealth_Skirts) | Juiced up skirts for the V0.2 | V0.2 | 2023-10-24T08:48:08+00:00 | -| maximilian-foerg | [Afterburner Turbo Mod](maximilian-foerg/AB_Turbo_Mod) | A purely cosmetic mod for Afterburner | V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | -| | [Switchwire Double 60mm Fan Mount](maximilian-foerg/VSW_Double_60mm_Fan_Mount) | A mount for two (or four) 60mm fans in SW's electronics compartment | VSW | 2023-07-15T11:51:22+00:00 | -| Mckurt | [Switchwire Y Belt Tensioner](Mckurt/Switchwire_Y_Belt_Tensioner) | Switchwie Y axis Belt Tensioner | VSW | 2023-07-13T14:30:27+00:00 | -| MCMBen | [Voron0 Block & Tackle Z Belt](MCMBen/Voron0_Block_and_Tackle_Z_Belt) | A block & tackle belted Z solution using NEMA14. Ratios from 5:1 to... | V0.2 | 2023-07-13T14:30:27+00:00 | -| Mellow | [V0 Fly-Gemini](Mellow/V0_Fly-Gemini) | Fly-Gemini adapted model for V0 | V0.2 | 2023-07-13T14:30:27+00:00 | -| mikepthomas | [MKS Mosfet Mount](mikepthomas/MKS_Mosfet_Mount) | MKS Mosfet Mount based of the Trident Raspberry Pi Mount. | V1.8, V2.4, VT | 2023-07-15T11:51:22+00:00 | -| MikesMods | [LGX mount for V0.1 with 2nd X rail](MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail) | V0.1 mod for mounting Bondtech LGX extruder with addition of 2nd X... | V0.2 | 2023-07-13T14:30:27+00:00 | -| Minsekt | [Rear Umbilical](Minsekt/Rear_Umbilical) | Rear Umbilical mounting solution including a relocated Y-Endstop | V2.4 | 2023-07-13T14:30:27+00:00 | -| mjoaris | [10x11 Cable Chain Endcaps](mjoaris/10x11_Cable_Chain_Endcaps) | Printable Endcaps for 10x11 Cable Chains | V1.8, V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Mini12864 LCD Mount](mjoaris/Mini12864_LCD_Mount_for_V2.4) | Swiveling case for the Fysetc Mini12864 LCD | V2.4 | 2023-07-15T11:51:22+00:00 | -| mosher | [Door hinges with M3 screws shafts](mosher/m3_door_hinges) | Simple mod of print in place door hinges, which uses m3 screws as... | V2.4 | 2023-12-21T00:45:44+00:00 | -| mpfl | [V0.1 OLED-skirt](mpfl/V0.1_skirt_OLED) | V0.1 skirt with 0.96" OLED | V0.2 | 2023-07-13T14:30:27+00:00 | -| MrBean66 | [SKR Pro DIN Mount](MrBean66/SKR_PRO_Mount) | Simple mod to mount the SKR Pro board from BTT to a DIN rails. | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | -| MrDespair | [MiniAB Pinda Probe Mount](MrDespair/MiniAB_Pinda) | Replacement MiniAB Cowling to add a mount for a Pinda style probe. | V0.2 | 2023-07-14T13:24:54+00:00 | -| Mrgl-Mrgl | [LGX Lite Mount](Mrgl-Mrgl/LGX_Lite_Mount) | a mount for the LGX Lite | V1.8, V2.4, VT | 2023-07-13T14:30:27+00:00 | -| MSA | [Belt tension helper](MSA/V0-Belt-tension-helper) | Belt tension helper for V0.1 | V0.2 | 2023-07-14T13:24:54+00:00 | -| MSiemons | [Tophat Hinge V0](MSiemons/TophatHingeV0.1) | Simple hinge for V0 Tophat | V0.2 | 2023-07-14T13:24:54+00:00 | -| muradir | [Zodiac BMO Stealthburner Toolhead](muradir/Zodiac_BMO_Stealthburner_Toolhead) | A Stealthburner toolhead for the Zodiac BMO Hotend, based on the... | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | -| Nashuar | [V0 Dragon Toolhead M2.5x8](Nashuar/V0_Dragon_ToolheadStockScrews) | This toolhead uses the stock M2.5 screw that came with the dragon... | V0.2 | 2023-07-13T14:30:27+00:00 | -| natewalck | [V1.8 Jigs](natewalck/v1.8_Jigs) | Jigs for assembling V1.8 | V1.8 | 2023-07-13T14:30:27+00:00 | -| nhchiu | [V0.1 Movable Pulley Z Drive](nhchiu/V0.1_Movable_Pulley_Z) | A movable pulley system on the Z axis with 1:8 total speed ratio... | V0.1 | 2023-07-15T11:51:22+00:00 | -| nikolasbabetas | [Neopixel Holder](nikolasbabetas/Neopixel_Holder) | A holder to attach Neopixel/WS2812B Led Strips to the V0.1 | V0.1 | 2023-07-15T11:51:22+00:00 | -| Nomsplease | [60mm Shaft Jig](Nomsplease/60mm_Shaft_Jig) | Simple jig for cutting and grinding 60mm Z shafts | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Duet Wifi Mount](Nomsplease/V0_duet_wifi_mount) | Duet wifi mount in pocketwatch location | V0.2 | 2023-12-21T00:45:44+00:00 | -| | [LED Mounts](Nomsplease/V0_led_mounts) | Basic LED mounts for 10 and 12mm strips | V0.2 | 2023-12-21T00:45:44+00:00 | -| | [Remixed Panel Mounts](Nomsplease/V0_panel_mounts) | Remixed rear bottom panel mounts with stop | V0.2 | 2023-12-21T00:45:44+00:00 | -| | [Pi Cam/ZeroW Mount](Nomsplease/V0_pi_zero_camera_mount) | Mount for pi camera and ZeroW | V0.2 | 2023-12-21T00:45:44+00:00 | -| | [Pocket Watch Rear Reolcation...](Nomsplease/V0_pocket_watch_rear_relocation) | Pocket watch rear reolcation bracket | V0.2 | 2023-12-21T00:45:44+00:00 | -| Oakman | [BTT 24V UPS Metal DIN Mount](Oakman/BTT_24V_UPS_Metal_DIN_Mount) | Adapter to use a metal DIN mount for the BTT 24V UPS | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | -| | [FYSETC Spider Metal DIN Mount](Oakman/FYSETC_Spider_Metal_DIN_Mount) | Use a metal DIN mount for your FYSETC Spider | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | -| | [RPI Metal DIN Mount](Oakman/RPI_Metal_DIN_Mount) | Adapter for metal DIN mounting the Raspberry Pi | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | -| OboMaker3D | [C17-EXT Filter HEPA Carbon](OboMaker3D/C17-EXT) | Replaces standard filter with new HEPA Crabon and 120mm fan V1.1 | V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | -| | [C17-EXT-CARTRIDGE for C17-EXT...](OboMaker3D/C17-EXT-CARTRIDGE) | Alternative to a commercial cartridge for the C17-EXT filter | V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | -| ommy | [roller brackets](ommy/roller_brackets) | Brackets to help rolling V2 on its side. | V2.4 | 2023-11-13T15:23:59+00:00 | -| oxno | [RBP Zero Bracket](oxno/rbp_zero_braket) | Bracket for Raspberry pi zero. | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | -| padok | [Chain Anchor - ADXL345 mount Mod](padok/chain_anchor-ADXL345_mount) | A ADXL345 mount for the Afterburner | V2.4 | 2023-07-15T11:51:22+00:00 | -| Phalanx | ["Other" Idlers Mod](Phalanx/Other-V2-Idlers) | Allow usage of wider toolheads on the V2 | V2.4 | 2023-07-14T13:24:54+00:00 | -| piet206 | [V1.8 Z Rails Mod](piet206/V1.8._Z_Rails_Mod) | Add MGN12H linear rails for Z axis motion | V1.8 | 2023-10-24T11:32:29+00:00 | -| Polar-Ted | [V0.1 Z nozzle endstop switch](Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch) | Sexbolt style switch for V0 | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [V0.1 Two Piece Back Panel](Polar-Ted/V0_Two_Piece_Back_Panel) | Vented 2 piece back panel for V0 | V0.2 | 2023-07-13T14:30:27+00:00 | -| Polared | [Power Inlet with Keystone Insert](Polared/Power_Inlet_w_Keystone_Insert) | Voron 0.1 Power inlet with keystone insert slot | V0.2 | 2023-07-13T14:30:27+00:00 | -| ponkotsu1 | [V0 Launchpad Skirt](ponkotsu1/V0_Launchpad_Skirt) | Another style V0 skirt | V0 | 2023-12-21T00:45:44+00:00 | -| prasadp4009 | [StealthBurner CR Touch Mod](prasadp4009/SW_SB_CRTouch) | Voron SW StealthBurner CR Touch Mod | VSW | 2023-07-13T14:30:27+00:00 | -| Printopal | [Magnetic top panel](Printopal/Magnetic_top_panel) | Top panel with magnets allows for quick installation and removal | V1.8, V2.4 | 2023-07-14T13:24:54+00:00 | -| PsychoShaft | [C92X_PsycHoShafts_Mount](PsychoShaft/C92X_PsycHoShafts_Mount) | 2020 Top profile 920 camera mount / 2 point axis pivot | V1.8, V2.4, VT | 2023-07-13T14:30:27+00:00 | -| QuackProfit | [V0 Adafruit NeoPixel LED Mounts](QuackProfit/V0-Adafruit-Y_Rails) | Mount Adafruit PCB NeoPixel Sticks on the V0 Y-rail extrusions | V0.2 | 2023-07-14T13:24:54+00:00 | -| quattroerik | [V2.4 Door Hinge M3 3mm 180deg](quattroerik/front_door_m3_180_deg_3mm) | Voron 2.4 door hinges for 3mm panel, 180 deg opening and m3 screw... | V2.4, VT | 2023-07-15T11:51:22+00:00 | -| randell | [Door Hinges](randell/Door_Hinges) | Door hinges that use an M3 bolt for a pin and bolts thru the panel | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Microswitch Pod for PCB](randell/Microswitch_Endstop) | Modified endstop pod for use of endstop switches mounted on a PCB | V2.4 | 2023-07-15T11:51:22+00:00 | -| raymondh | [Large Spool Holders](raymondh/LargeSpoolHolders) | Larger spool holders for KVP spools | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | -| reapola | [MKS CANable Pro DIN Mount](reapola/MKS_CANable_Pro_mount) | MKS CANable Pro mount which mounts on a DIN rail | V0.2, V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | -| reQu1em00 | [Kirigami LED Bed Front](reQu1em00/Kirigami_LED_Bed_Front) | Kirigami bed front with space for a single LED or Neopixel button | V0.2 | 2023-10-24T11:32:29+00:00 | -| revnull | [Raspberry Pi 7inch Display Mount](revnull/rpi_7in_display_mount) | An articulating mount for the offical Raspberry Pi 7inch touch screen | V2.4 | 2023-07-15T11:51:22+00:00 | -| Rhastlyn | [60mm Fan Cover](Rhastlyn/60mmFanCover) | A easy to install cover for spec 60mm fans originally designed for... | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Wansview 1080p Camera Mount](Rhastlyn/WansviewCameraMount) | A camera mount that replaces the OEM part to allow the camera to be... | V2.4 | 2023-07-14T13:24:54+00:00 | -| richardjm | [ADXL drag chain mount](richardjm/adxl-chain) | Permanent mount for ADXL boards on the back of the motor, replacing... | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Back blanking plate](richardjm/back-plate) | Back blanking plate that can be used instead of the exhaust filter... | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [LED 15.5mm quarter round mounts](richardjm/led-mounts) | Mounting corners with integrated cable runs for 15.5mm quarter... | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Picam corner mount](richardjm/picam-corner) | Out of the way corner mounted picam | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Printable snap latches for 2020...](richardjm/snap-latch-2020) | Quick release panel latch inspired by the work of others. | V2.4 | 2023-12-21T00:45:44+00:00 | -| rngSplat | [Printable Switchwire Deck Plate](rngSplat/SW_Deck_Plate) | Print a deck plate for Switchwire with debossed Voron logo | VSW | 2023-10-24T11:32:29+00:00 | -| roboticator24 | [Touchscreen for OctoDash](roboticator24/4inch_touchscreen_mount_for_v2.4) | Mount a 4-inch LCD touchscreen to your V2.4 in place of the usual... | V2.4 | 2023-10-24T11:32:29+00:00 | -| RockNLol | [RockNRoll](RockNLol/RockNRoll) | Rockers to roll the printer on its back for easier access to the... | V2.4 | 2023-07-14T13:24:54+00:00 | -| rsheng118 | [BTT octopus DIN vertical mount](rsheng118/BTT_octopus_DIN_vertical_mount) | DIN vertical mount for Big Tech Tree Octopus board | V2.4 | 2023-07-15T11:51:22+00:00 | -| ruiqimao | [V0.2 MGN9C X Axis](ruiqimao/V0.2_MGN9C_X) | MGN9C linear rail for the X axis on V0.2 | V0 | 2023-10-26T04:44:49+00:00 | -| ryandam | [Cable Management Duct](ryandam/Cable_management_duct) | Zip tie mount intergrated cable duct to hide your cable | V0.2 | 2023-07-13T14:30:27+00:00 | -| sammynorway | [LGX stealthburner connector cover](sammynorway/LGX-stealthburner-connector-cover) | Cable cover for LGX and stealthburner | V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | -| samwiseg0 | [4 Channel Relay Under Deck Mount](samwiseg0/4channel_relay_under_deck_mount) | Mod to mount a 4 channel GPIO controlled relay | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [AB Plug (Microfit 1x4)](samwiseg0/ab_plug_microfit_1x4) | Mod to mount A & B motor connectors to the gantry | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Corner Cable Hide/Cover (LED Wires)](samwiseg0/corner_cable_hide) | Mod to hide cables around z idlers | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [ESP8266 NodeMCU Din Mount](samwiseg0/esp8266_nodemcu_din_mount) | Din mount for ESP8266 NodeMCU | V2.4, VT | 2023-07-15T11:51:22+00:00 | -| | [Extrusion/Chamber Thermistor Mount](samwiseg0/extrusion_thermistor_mount) | Extrusion mount for a NTC100K Thermistor extrusion | V0.2, V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | -| | [LRS PSU Screw Terminal Cover](samwiseg0/lrs_screw_terminal_cover) | Mod to cover the screw terminals for several LRS style PSUs | V0.2, V1.8, V2.4, VSW, VT | 2023-10-24T08:48:08+00:00 | -| | [Microfit 2x3 Skirt Connector (ADXL)](samwiseg0/microfit_2x3_skirt_connector_adxl) | Mod for a Microfit 2x3 connector to be mounted in a skirt | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Corsair Flash Voyager GTX Din Mount](samwiseg0/voyager_gtx_din_mount) | Din carrier for a Corsair Flash Voyager GTX | V2.4, VT | 2023-07-15T11:51:22+00:00 | -| scanlory | [Clip-On Front Door Frame](scanlory/clip_on_door_frame) | Clip-on frame to stiffen and seal front door panels when using... | V2.4 | 2023-07-13T14:30:27+00:00 | -| ScramblerUSA | [Side Skirt Power Switch](ScramblerUSA/SideSkirtPowerSwitch) | Skirt-mounted rocker switch for easy access for Voron 2.4 | V2.4 | 2023-07-14T13:24:54+00:00 | -| See1807 | [TopHat Exhaust and LED Light](See1807/Voron_V0_Exhaust_and_LED_Mod) | A mount for 10mm LED strips and Exhaust for Voron V0 | V0.2 | 2023-07-13T14:30:27+00:00 | -| Shiftingtech | [Trident Dual Power Switch](Shiftingtech/Trident_dual_power_switch) | A replacement skirt, allowing 2 power switches | VT | 2023-07-13T14:30:27+00:00 | -| ShinyPants | [OrangePi 3 LTS DIN Rail bracket](ShinyPants/Orange_Pi_3_LTS_DIN) | A DIN rail mount for OrangePi LTS 3 | V1.8, V2.4, VT | 2023-07-13T14:30:27+00:00 | -| Shteeeeeve | [V0.1 LED Tophat](Shteeeeeve/V01-LED-Tophat) | V0.1 LED Tophat w/ 24V LED Lightstrip | V0.2 | 2023-07-14T13:24:54+00:00 | -| Slidr | [PanzerBalls 2.4](Slidr/PanzerBalls2.4) | Squash Ball Feet for V2.4 | V2.4 | 2023-07-14T13:24:54+00:00 | -| | [PanzerChain 2.4](Slidr/PanzerChain2.4) | Energychain for V2.4 | V2.4 | 2023-07-13T14:30:27+00:00 | -| slitte | [PCB_Probe](slitte/PCB_Probe) | PCB for BAT85 and pull up resistor | V2.4, VT | 2023-07-13T14:30:27+00:00 | -| | [ssd_bracket](slitte/ssd_bracket) | bracket for mounting a 2.5" ssd to a din rail | V2.4, VT | 2023-07-13T14:30:27+00:00 | -| sloscotty | [Switchwire Wall Plate](sloscotty/SW_Wall_Plate) | SW plate for enclosure | VSW | 2023-07-15T11:51:22+00:00 | -| | [NoNutz TopHat Cam Extension](sloscotty/TopHat_Cam_Extension) | Tophat extension with integrated webcam for V0/0.1 | V0.2 | 2023-07-15T11:51:22+00:00 | -| spacelab2021 | [Orbiter Clockwork Mount](spacelab2021/Orbiter-Clockwork) | A clockwork adaptor for the Orbiter v1.5 Extruder with full... | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | -| Spaghetti-Bolognese | [LCD Case Mod](Spaghetti-Bolognese/LCD_case_mod) | Improvements to the V2.4 mini12864 LCD case inc E-stop button cover | V2.4 | 2023-07-14T13:24:54+00:00 | -| | [Simplified Z Drive Motor Mount](Spaghetti-Bolognese/Z_drive_motor_mount) | Z drive motor mount bracket mod to improve pulley to belt alignment | V2.4 | 2023-12-21T00:45:44+00:00 | -| sse018 | [Octopus DIN Rail bracket](sse018/Octopus_DIN_Rail_bracket) | A Din rail mount for BTT Octopus board | V2.4 | 2023-07-13T14:30:27+00:00 | -| strayr | [Creality toolhead for stealthburner](strayr/stealthburner_creality_toolhead) | Use a creality ender 3 style hotend with stealthburner | V1.8, V2.4, VSW | 2023-07-15T11:51:22+00:00 | -| sttts | [Waveshare 5.5inch HDMI AMOLED Mount](sttts/Waveshare-5.5-inch-HDMI-AMOLED) | Mod to mount a Waveshare 5.5inch full HD display on a V2 | V2.4, VSW | 2023-07-15T11:51:22+00:00 | -| StvPtrsn | [Skirts for a 320mm Build](StvPtrsn/320mm_Build) | Skirts for a 320mm build | V2.4 | 2023-07-14T13:24:54+00:00 | -| | [Keystone Jack for Filtered Mains...](StvPtrsn/Keystone_Jack_Filtered_Mains_Panel) | Add a keystone jack to your filtered mains plug panel | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Parts_Jigs and Mods](StvPtrsn/Parts_Jigs_and_Mods) | Parts, Jigs and modifications I use for my builds | V0.2, V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | -| | [Side Fan Support, No Tape](StvPtrsn/Side_Fan_Support_No_Tape) | Mount the 60mm side fans and inserts without tape | V2.4 | 2023-07-14T13:24:54+00:00 | -| Takuya | [WANSVIEW USB Camera Mount](Takuya/USBCameraMount) | WANSVIEW 1080p Camera Mount for Voron 2.4 | V2.4 | 2023-07-13T14:30:27+00:00 | -| tallman5 | [Z Locks](tallman5/z-locks) | Helping hands curing v2.4 build, replaces long zip ties. | V2.4 | 2023-07-15T11:51:22+00:00 | -| tameike | [Din Rail 2020 Holder](tameike/DIN_Rail_2020_holder) | Attaching DIN Rails to 2020 | V2.4 | 2023-12-21T00:45:44+00:00 | -| | [Din Rail SKR 90 deg](tameike/DIN_Rail_SKR_1.3_90deg) | SKR V1.3 bracket turned 90 degrees | V2.4 | 2023-10-24T11:32:29+00:00 | -| | [Jetpack V0 base](tameike/Jetpack_V0) | Attach Jetpack to V0 frame | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [TacoRaven Mounting Frame](tameike/V0_TR_Mounting_Frame) | TR V0 mount | V0.2 | 2023-07-13T14:30:27+00:00 | -| tayto-chip | [V2.4 Skirt Switch Mod](tayto-chip/skirt_switch_mod) | Add a ON/OFF Switch to side or front skirts | V2.4 | 2023-10-24T11:32:29+00:00 | -| teookie | [AB dial indicator mount](teookie/AB_dial_indicator_mount) | Mount for attaching standard dial indicators to AB | V1.8, V2.4, VSW | 2023-07-13T14:30:27+00:00 | -| | [SKR Brace](teookie/skr_brace) | Rigidize and stabilize SKR 1.4 mounts | V2.4 | 2023-07-15T11:51:22+00:00 | -| th0mpy | [BEEFY Din Clips](th0mpy/beefy-din) | Two piece BEEFY Din Clips, holds stronger | V2.4 | 2023-07-15T11:51:22+00:00 | -| TheSquiffy | [V0 Belts holder](TheSquiffy/V0_Belts_holder) | V0 Belts Holder | V0.2 | 2023-07-14T13:24:54+00:00 | -| TiagoBarata | [Logitech C270 Mount](TiagoBarata/Logitech_C270_Mount) | Logitech C270 Top Center Mount | V2.4 | 2023-07-14T13:24:54+00:00 | -| Tircown | [DIN mount RS-15-5 PSU](Tircown/DIN_mount_RS-15-5) | A DIN mount for the RS-15-5 | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Display mount 5"](Tircown/Display_mount_5inch) | Tiltable mount for a 5" tactile display | V2.4 | 2023-07-14T13:24:54+00:00 | -| | [Raspberry in plug panel](Tircown/Raspberry_plug_panel) | Raspberry mount vertically in the plug panel, allow easy access to... | V2.4 | 2023-07-14T13:24:54+00:00 | -| | [V0.1 Skirt buttons](Tircown/V01_skirt_buttons) | Buttons for V0.1 spec skirts | V0.2 | 2023-07-14T13:24:54+00:00 | -| togi | [Exhaust housing side fitting](togi/exhaust_housing_side_fitting) | Moves the exhaust housing bowden fitting 90 degrees to allow the... | V2.4 | 2023-12-21T00:45:44+00:00 | -| top_gun_de | [mount_for_umbilical](top_gun_de/mount_for_umbilical) | Umbilical guide that goes on the chain anchor | V2.4 | 2023-07-13T14:30:27+00:00 | -| Triano | [Ender 3 Pro or V2 to Switchwire Mod](Triano/Ender_3Pro_Switchwire) | Convesion of an Ender 3 Pro or V2 to a Switchwire | VSW | 2023-07-14T13:24:54+00:00 | -| Ultrawaffles | [Ender 3 to SW conversion](Ultrawaffles/Ender_3_to_SW) | A conversion mod for the ender 3 to switchwire. Designed to allow... | VSW | 2023-10-24T11:32:29+00:00 | -| VinnyCordeiro | [RGB LED grid for Stealthburner](VinnyCordeiro/RGB_LED_grid_for_SB) | A small RGB LED grid for Stealthburner's logo | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | -| warriorofwire | [Slenderfan for Afterburner](warriorofwire/slenderfan) | Lighter, quieter, smaller Afterburner | V2.4 | 2023-07-15T11:51:22+00:00 | -| watt-this | [In Situ Linear Carriage Block...](watt-this/in-situ_linear_rail_greasing) | A modification that allow lubrication of the linear reals while... | V2.4r2 | 2023-12-27T16:59:01+00:00 | -| Weaslus | [Electronics Bay and Enclosure...](Weaslus/Electronics-Bay-Seperator) | Better enclose chamber and keep heat from electronics | V0.2 | 2023-07-13T14:30:27+00:00 | -| whoppingpochard | [Extrusion Backers](whoppingpochard/extrusion_backers) | Laser-cut metal pieces to counteract bimetallic frame warping | V2.4 | 2023-07-13T14:30:27+00:00 | -| wile-e1 | [Deck Panel Support Clips](wile-e1/Deck_Panel_Support_Clips) | Clips to help support lower deck panels to prevent (or fix) warping: | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Stealthburner + CW1 + PCB Cover](wile-e1/Stealthburner_CW1_PCB_Cover) | Low-poly for Stealthburner + CW1 + PCB installations: | V1.8, V2.4, VSW | 2023-07-15T11:51:22+00:00 | -| wrez | [V0 Alternate IEC 320 C14 Power...](wrez/astrodyne-inlet) | Drop in replacement for alternate-source power inlet if spec inlet... | V0.2 | 2023-07-15T11:51:22+00:00 | -| xbst_ | [ADXL345 V0 Mount](xbst_/ADXL345_V0_Mount) | V0 Mount for a ADXL345 module | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [Car Hood Style Bed Hinge](xbst_/Bed_Hinge) | A way of reaching electronics from the top by having a "car hood"... | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Duct Mount](xbst_/Duct_Mount) | 100mm/4" ducting mount for ventilation. Also supports umbilical... | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [DuetZero](xbst_/DuetZero) | Pi Zero mount over a Duet2 for space saving | V0.2, V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Easy Access Rear Panels](xbst_/Easy_Access_Rear_Panels_v0) | New rear panels designed to expose the extruder for easy filament... | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [Flat V2.4 Skirts](xbst_/Flat_Skirts) | Flat V2.4 Skirts so a panel without cutouts can be used | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Hat LED Mount](xbst_/Hat_LED_Mount) | Top Hat LED module mount | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [HOYMK SSR Mount](xbst_/HOYMK_SSR_Mount) | Mount for Chinese HOYMK SSR | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [PCB LED Holder](xbst_/LED_Holder) | Very simple mount for some (?) PCB LED Bars | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | -| | [DIN Mount Max31865](xbst_/Max31865_DIN_Mount) | A simple DIN rail mount for the Adafruit (or SAME SIZE clone)... | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | -| | [DIN Mount Omron Relay](xbst_/Omron_DIN_Mount) | A simple DIN rail mount for the BOM Relay | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | -| | [DIN Mount Pi 4x Relay Board](xbst_/Relay_DIN_Mount) | A simple DIN rail mount for the 4 channel relay board for Raspberry Pi | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | -| | [V0 Electronics Cover](xbst_/V0_Electronic_Panel) | A printed cover for v0 electronics. Requires larger printer to print. | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [Mobius 4 (M4) V0 Mod](xbst_/V0_M4_Mod) | Mod to mount a M4 extruder to a Voron 0 where pocketwatch extruder... | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [V0 PiCam Mount](xbst_/V0_Picam) | A Raspberry Pi Camera Mount For V0 | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [Screwed Front Door Hinge](xbst_/V0_Screw_Front_Hinge_Mod) | Mod to screw the front door panel (instead of VHB) | V0.2 | 2023-10-24T11:32:29+00:00 | -| | [V0 Buttons & OLED Mount](xbst_/V0_Skirt_Buttons) | Mod to mount custom Gcode macro buttons & Waveshare 1.3" OLED display | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [V2.4 Fanless Middle Skirt](xbst_/V2.4_Fanless_Middle_Skirt) | A Fanless alternative middle side skirt | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [V2.4 Skirt Buttons](xbst_/V2.4_Skirt_Buttons) | Skirt mod for custom Gcode macro buttons | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [ZipClip V0](xbst_/ZipClip_v0) | Very simple ziptie mount for v0 1515 extrusions | V0.2 | 2023-07-13T14:30:27+00:00 | -| xceled | [Single Panel Magnet Mount](xceled/Single_Panel_Magnet_Mount) | Mount your front panel using only magnets | V2.4 | 2023-07-15T11:51:22+00:00 | -| yenda | [SW More Robust XZ Belt Paths](yenda/vsw_more_robust_belt_paths) | Small mods to belt routing components to ensure a better/more... | VSW | 2023-12-23T00:20:10+00:00 | -| yeri | [V0 Magnetic Panels](yeri/V0_Magnetic_Panels) | Mount V0 panels with magnets, removes need for hinges and lets you... | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [V1 3Z](yeri/V1_3Z) | 3Z mod for V1 | V1.8 | 2023-07-15T11:51:22+00:00 | -| Zen3D | [V0 1515 T-nut](Zen3D/V0_1515_T-nut) | M3 square and hex nuts for Voron0 1515 frame | V0.2 | 2023-07-14T13:24:54+00:00 | -| | [V0 Handle](Zen3D/V0_Handle) | Voron0 Handle for 3mm panels | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [V0 MidPanel HexPattern](Zen3D/V0_MidPanel_HexPattern) | Voron0 MidPanel with Hex pattern and Wire cover | V0.2 | 2023-07-14T13:24:54+00:00 | -| | [V0 Skirt set](Zen3D/V0_Skirt) | SSR, PowerSwitch, Adxl, Nameplate and color change printing | V0.2 | 2023-07-14T13:24:54+00:00 | -| zruncho | [V0 No-Drop Nuts](zruncho/V0_No_Drop_Nuts) | Voron0 nut inserts which auto-align (LDO frames only) | V0.2 | 2023-07-15T11:51:22+00:00 | -| ZZP8202 | [Pull-out electrical store](ZZP8202/Pull-out_electrical_store) | Voron 2.4 Pull-out electrical store（350mm only） | V2.4 | 2023-07-14T13:24:54+00:00 | +| 1-0-R | [V2.4 handle](1-0-R/handle) | Handle for Voron 2.4 | V2.4 | 2024-01-08T16:38:25+00:00 | +| 120decibell | [Side entry exhaust housing](120decibell/exhaust_housing_side_entry) | Exhaust housing with dual cover screws and single or dual side... | V1.8, V2.4, VT | 2024-01-08T16:38:25+00:00 | +| | [Huvud Chain Mount](120decibell/huvud_chain_mount) | Huvud rear mount for Clockwork or LGX that supports a cable chain. | V1.8, VT | 2024-01-08T16:38:25+00:00 | +| 3dpandme | [FANnypack zero](3dpandme/Fannypack_zero) | Electronics cooling solution for Voron Zero | V0.2, VSW, VT | 2024-01-08T16:38:25+00:00 | +| | [Thermistor holder zero](3dpandme/Thermistor_holder_zero) | Extended thermistor holder for Voron Zero | V0.2, VSW, VT | 2024-01-08T16:38:25+00:00 | +| 3vilson | [V0.1_Skirt_Holes](3vilson/V0.1_Skirt_Holes) | Skirt with Access Holes from the bottom | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [V0.1_Skirt_Inlet](3vilson/V0.1_Skirt_Inlet) | Skirt with C14 inlet + New feet to screw into | V0.2 | 2024-01-08T16:38:25+00:00 | +| 42bios | [Corner panel clip w. cable](42bios/corner_panel_clip_cable) | Corner panel clip with an internal cable path. | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Exhaust filter housing - side...](42bios/exhaust_filter_housing_side) | Exhaust filter housing with the G1-8 "thread on the side. | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [relay mount](42bios/relay_mount) | relay-mount for 2x 2 channel relay modules. | V2.4 | 2024-01-08T16:38:25+00:00 | +| ademuri | [Lights, Camera, Voron](ademuri/Lights_Camera_Voron) | A mount for LED strips and Picam for the V0.1 | V0.2 | 2024-01-08T16:38:25+00:00 | +| aeresov | [cable tie DIN mount](aeresov/cable_tie_DIN_mount) | A bracket for cable ties to route cables across DIN rails. | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [MeanWell UHP-xxx DIN mount](aeresov/MeanWell_UHP_DIN_mount) | A bracket for MeanWell UHP series PSU (200, 350 and 500) to mount... | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Raspberry Pi DIN mount](aeresov/Raspberry_Pi_DIN_mount) | A bracket for Raspberry Pi 3/4 to mount it onto DIN rail, along or... | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [SKR 1.3/1.4 DIN mount](aeresov/SKR_DIN_mount) | A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or... | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [TL filament sensor bracket](aeresov/TL_filament_sensor_bracket) | A bracket for TL filament sensor to mount near stock spool holder. | V2.4 | 2024-01-08T16:38:25+00:00 | +| Akio | [Hidden cable routing z belt cover](Akio/cable_routing_z_belt_cover) | Z belt covers that allow hidden cable routing. | V2.4 | 2024-01-08T16:38:25+00:00 | +| al3ph | [Analog Timer Mount](al3ph/analog_timer_mount) | A skirt mount for analog timer | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Filament Runout Sensor](al3ph/filament_runout) | A simple filament runout sensor | V0.2, V1.8, V2.4, VSW | 2024-01-08T16:38:25+00:00 | +| | [LED Mount](al3ph/led_mount) | A mount for 10mm LED WS2812 strips | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [PL05 Sensor Mount](al3ph/pl05_mount) | A mount PL05 inductive sensor | V0.2 | 2024-01-08T16:38:25+00:00 | +| alanho | [BTT PITFT50 v2 Mount](alanho/BTT_PITFT50_v2_Mount) | A mount for the BTT PITFT50 v2 Touch Display | V2.4 | 2024-01-08T16:38:25+00:00 | +| albert | [IKEA Dioder Led Mount](albert/IKEA_Dioder_Led_Mount) | A mount for the IKEA Dioder LED strip | V2.4 | 2024-01-08T16:38:25+00:00 | +| AlexanderT-Moss | [270 Clamping Hinges](AlexanderT-Moss/270-Clamping-Hinges) | Simple 270 degree hinges that clamp to the front panels instead of... | V2.4 | 2024-01-08T16:38:25+00:00 | +| Andre | [Mini Afterburner ADXL345 Mount](Andre/Mini_Afterburner_ADXL345_Mount) | Mount for an AXDL345 on the Mini Afterburner | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Mini Afterburner Strain Relief](Andre/Mini_Afterburner_Strain_Relief) | A replacement strain relief for the Mini Afterburner toolhead | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Revo Nozzle Skirt](Andre/Revo_Nozzle_Skirt_Trident) | A Revo nozzle box hidden in a Trident skirt. | VT | 2024-01-08T16:38:25+00:00 | +| | [V0 Neopixel Front Bed Mount](Andre/V0_Neopixel_Front_Bed_Mount) | A replacement Front Bed Mount with room for a neopixel or dotstar... | V0.2 | 2024-01-08T16:38:25+00:00 | +| antoinecellerier | [DS18B20 Sensor Mount](antoinecellerier/ds18b20-sensor-mount) | DS18B20 temperature sensor mount | V0.2 | 2024-01-08T16:38:25+00:00 | +| ardichoke | [V0 Long Thumb Nut](ardichoke/v0-long-thumb-nut) | Taller thumb nuts for V0 bed | V0.2 | 2024-01-08T16:38:25+00:00 | +| arkeet | [Dial test indicator mount](arkeet/dti-mount) | A toolhead mount for a dial test indicator, where the tip is... | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Magnetic hotend fan cover](arkeet/magnet-fan-cover) | A replacement hotend fan cover, held with magnets instead of screws. | V1.8, V2.4, VSW | 2024-01-08T16:38:25+00:00 | +| | [MGN12 X-axis](arkeet/mgn12) | Replaces the dual MGN9H rails with a single MGN12H. | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [V0 DC inlet](arkeet/v0-dc-inlet) | Skirt inlet for external 24V DC power supply. | V0.2 | 2024-01-08T16:38:25+00:00 | +| aTinyShellScript | [RS PSU DIN Bracket](aTinyShellScript/RS_PSU_DIN_Brackets) | DIN brackets for MeanWell RS PSUs with 80mm spacing. | V2.4 | 2024-01-08T16:38:25+00:00 | +| AVieira | [Universal_Phone_Mount](AVieira/Universal_Phone_Mount) | This mod allows the use of different smartphones or possibly... | V2.4r2 | 2024-01-08T16:38:25+00:00 | +| baccula | [Revo Nozzle Holder for v2.4 350](baccula/revo_skirt_nozzle_holder) | A remix of Andre's design allowing for skirt storage of 4 E3D Revo... | V2.4 | 2024-01-08T16:38:25+00:00 | +| Backenfutter | [Mount for Electreeks Camera](Backenfutter/Mount_for_Electreeks_Camera) | This Mod is a simple "One Piece" mount for the popular Electreeks... | V2.4 | 2024-01-08T16:38:25+00:00 | +| Badnoob | [AB-BN Afterburner mod (5015)](Badnoob/AB-BN) | Improved Afterburner with 5015 fan | V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| | [AB-BN for Stock Afterburner (4020)](Badnoob/ABBN_for_Stock) | Improved Dragon and Rapido toolhead for stock Afterburner with 4020... | V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| | [Precision AB Drive](Badnoob/Precision_AB_Drive) | Changes the gearing for the AB drives to improve both resolution... | V2.4 | 2024-01-08T16:38:25+00:00 | +| Baltojikale | [LoudOwl aka Stabby](Baltojikale/LoudOwl_aka_Stabby) | Alternative dual 5015 part cooling fan toolhead for Afterburner | V1.8, V2.4, VSW | 2024-01-08T16:38:25+00:00 | +| beaugalbraith | [Nova Printhead](beaugalbraith/Nova_Printhead) | Use Nova Hotend with Afterburner | V2.4 | 2024-01-08T16:38:25+00:00 | +| BladeScraper-Designs | [CornerPanel_SpoolHolder](BladeScraper-Designs/CornerPanel_SpoolHolder) | A better supported Spool Holder that mounts to a modified corner... | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Horizontal Spool Holder](BladeScraper-Designs/Horizontal-Spool-Holder) | Based on the stock holder but mounts to the horizontal extrusions. | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Microswitch Pod With Connector](BladeScraper-Designs/Microswitch_Pod_With_Conector) | Microswitch pod with JST-XH 4-pin connector | V2.4 | 2024-01-08T16:38:25+00:00 | +| Blamm | [LRS-100 DIN mount](Blamm/lrs-100) | DIN rail mount for an extra LRS-100 Power Supply | V1.8, V2.4, VT | 2024-01-08T16:38:25+00:00 | +| BlueBear | [Bowden Fence](BlueBear/Bowden_Fence) | A little "fence" to hold the tubes away from the belts. | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Deck Panel Backpack](BlueBear/Deck_Panel_Backpack) | A mounting alternative if you don't want to drill your deck panel | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Clippable Wago 221 Mounts](BlueBear/Wago_221_mount) | Mounts for Wago 221 to screw or clip-in on 1515 extrusions | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Ziptie Mount](BlueBear/Ziptie_Mount) | Clippable Ziptie hooks for 1515 extrusions | V0.2 | 2024-01-08T16:38:25+00:00 | +| bobbleheed | [Filament Runout Sensor](bobbleheed/Filament_Runout) | Filament runout sensor that replaces the stock bowden retainer | V1.8, V2.4, VT | 2024-01-08T16:38:25+00:00 | +| | [Magnetic Panels](bobbleheed/Magnetic_Panels) | Magnetic clips to allow for easy removal and installation of panels | V2.4 | 2024-01-08T16:38:25+00:00 | +| Boingomw | [Wago mount](Boingomw/Wago_mount) | Smaller 5 port Wago mount that fits parallel to the support rails | V2.4 | 2024-01-08T16:38:25+00:00 | +| Bondtech | [Mini-After-LGX-Lite](Bondtech/Mini-After-LGX-Lite) | LGX Lite Toolhead Setup For Voron V0.1. | V0.2 | 2024-01-08T16:38:25+00:00 | +| btp | [Galileo chain mount (befenybay)](btp/Galileo_Switchwire_Chain_Mount) | Modified chain mount position to cater for difference with Galileo... | VSW | 2024-01-08T16:38:25+00:00 | +| buzzdalf | [v1.8/2.4 Afterburner connector...](buzzdalf/connector_cover) | v1.8/2.4 Connector cover for 42STH20-1004AS | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Ender 3 Switchwire Taller Z Mod](buzzdalf/ender_switchwire_taller_z) | Taller Z Mod | VSW | 2024-01-08T16:38:25+00:00 | +| | [Ender 3 Switchwire Y Tensioner Mod](buzzdalf/ytension) | Y Tension Mod | VSW | 2024-01-08T16:38:25+00:00 | +| ByteChild | [2-Channel Relay DIN Rail Bracket](ByteChild/2_Channel_Relay_DIN_Rail_Bracket) | DIN Rail mounting bracket for an 2-Channel-Relay | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [ESP32 DIN Rail Bracket](ByteChild/ESP32_DIN_Rail_Bracket) | DIN rail mounting bracket for an ESP32 | V2.4 | 2024-01-08T16:38:25+00:00 | +| bythorsthunder | [MGN9 Backers Idlers](bythorsthunder/MGN9_Backers) | New idler uppers for MGN9 Extrusion backers | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Stealthburner Rapido UHF](bythorsthunder/Stealthburner_Rapido_Uhf) | Stealthburner mod for Rapido UHF | V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| CannedBass | [PITFT50 45-degree mount](CannedBass/PITFT50_45_degree_mount) | Mount that puts the screen at a 45-degree angle for more vertical... | V2.4, VT | 2024-01-08T16:38:25+00:00 | +| | [Trident Bed Fans](CannedBass/Trident_Bed_Fans) | Bed fans for Trident | VT | 2024-01-08T16:38:25+00:00 | +| Ch4rlesB | [V0 Handles Slim](Ch4rlesB/V0_Handles_Slim) | Simple and slim handles for the V0 | V0.2 | 2024-01-08T16:38:25+00:00 | +| ChenTheDesignMaker | [Z Belt Clip](ChenTheDesignMaker/Z_Belt_Clip) | Simple clip to keep extra Z belts clean and away from panels | V2.4 | 2024-01-08T16:38:25+00:00 | +| chirpy | [V0.1 Nozzle Wiper](chirpy/NozzleWiper) | Servo powered nozzle wiper and purge bucket | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Runout UnKlicky Sensor](chirpy/RunoutUnklicky) | Runout UnKlicky Sensor is a filament runout sensor with mounts for... | V0.2, V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| | [V0.1 Raised Tophat](chirpy/TipTophat) | Alternative Tophat design that uses stock panels and raises height... | V0.2 | 2024-01-08T16:38:25+00:00 | +| chri.kai.in | [20x20mm Profile Covers](chri.kai.in/20x20mm_Profile_Covers) | Provide overlapping and flush slot covers for 20x20mm slot6... | V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| | [Angry CAM USB](chri.kai.in/Angry_CAM_USB) | Housing for small USB camera module, allowing mounting to gantry or... | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Exhaust Adapter 100mm](chri.kai.in/Exhaust_Adapter_100mm) | Replace 60mm exhaust fan with 100mm ventilation system adapter | V1.8, V2.4, VT | 2024-01-08T16:38:25+00:00 | +| chrisrgonzales | [270° Front Panel Hinge](chrisrgonzales/270_degree_hinge) | Hinges that have 270° of swivel, parametric CAD included | V2.4 | 2024-01-08T16:38:25+00:00 | +| christophmueller | [Phaetus and Zodiac Dragonfly BMO...](christophmueller/Phaetus_Dragonfly_BMO_Afterburner) | Covers both the original Phaetus variant as well as the Zodiac one. | V1.8, V2.4, VSW | 2024-01-08T16:38:25+00:00 | +| claytono | [Voron 2.4 Extrusion Jig](claytono/2.4-extrusion-jig) | A jig help align extrusions to get a properly square frame | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Fysetc S6 V2 Mount](claytono/fysetc-s6-v2-mount) | DIN Mount for the Fysetc S6 V2 controller | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | +| | [V0 Zip Tie Skirts](claytono/v0-zip-tie-skirts) | V0 skirts with small loops added along the top to allow zip tyiing... | V0.2 | 2024-01-08T16:38:25+00:00 | +| clee | [Monster8 DIN Rail Mounts](clee/Monster8_heatsert_mount) | DIN mount for Makerbase Monster8 V1/V2 controller | V2.4, VT | 2024-01-08T16:38:25+00:00 | +| cmrny | [V0.1 Motor Panel Modification](cmrny/v01_motor_panel_no_rub) | V0.1 Motor panel modification to keep umbilical and bowden tube... | V0.2 | 2024-01-08T16:38:25+00:00 | +| conqueror433 | [Voron Parts Logo](conqueror433/Voron_Parts_Logo) | Voron Parts Logo for your back panels, 3D Print or Laser Cut | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Voron V0.1 Parts Logo](conqueror433/Voron_V0.1_Parts_Logo) | Voron Parts Logo for your V0 deck panel | V0.2 | 2024-01-08T16:38:25+00:00 | +| consibonsi | [Y-Mod SW 9mm](consibonsi/Y-Mod_SW_9mm) | 9mm Y belt mod for SW | VSW | 2024-01-08T16:38:25+00:00 | +| csch0 | [SW Fan Mount No Tape](csch0/SW_FanMount_No_Tape) | 60x20 Fan Mount for SW without tape | VSW | 2024-01-08T16:38:25+00:00 | +| d3nny | [Filtered Power Plug with...](d3nny/mains_plug_panel_for_RND_165-00057) | Filtered Power Plug for RND 165-00057 and CAT6-Plug | V2.4 | 2024-01-08T16:38:25+00:00 | +| D4rkCelerity | [Raspberry Pi Zero Bracket](D4rkCelerity/Raspberry_Pi_Zero_Bracket) | Modified version of Trident RPi bracket to fit the smaller RPi Zero | V0.2, V1.8, V2.4, VT | 2024-01-08T16:38:25+00:00 | +| DaGlo | [V0.1 Duet 2 Wifi mounting brackets](DaGlo/Voron_V0_Duet_2_WiFi_Mounting_Brackets) | Voron 0.1 Mounting brackets with/without RPi 4 | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Voron V0 Mean Well power supply...](DaGlo/Voron_V0_MW_PS_Bracket) | Voron V0 Mean Well power supply bracket (Funssor Kit) | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Voron V0 SSR Mount](DaGlo/Voron_V0_SSR_Mount) | Voron V0 SSR Mount for the bottom | V0.2 | 2024-01-08T16:38:25+00:00 | +| DaGrooch13 | [Tophat Exhaust Filter V0](DaGrooch13/Tophat_Exhaust_Filter) | Activated charcoal exhaust filter with HEPA that replaces the rear... | V0.2 | 2024-01-08T16:38:25+00:00 | +| Dan88 | [V0 one-part Skirts](Dan88/V0skirt) | One part Skirts for the V0 | V0.2 | 2024-01-08T16:38:25+00:00 | +| dankeeling | [Creative Live! Camera Mount](dankeeling/CreativeLiveCameraMount) | A mod to provide a mount for the Creative Live! Camera that mounts... | V2.4r2, VT | 2024-01-08T16:38:25+00:00 | +| DaStivi | [The Cephalopod limb (BTT Octopus...](DaStivi/the_Cephalopods_limb) | An alternative Din rail mount for BTT Octopus (PRO) boards | V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| Daten | [Revo hotend skirt case](Daten/Voron_2.4_Revo_Nozzle_Holder) | A skirt case for the Revo hotends to reside R1 and R2 | V2.4 | 2024-01-08T16:38:25+00:00 | +| davidauvergne | [Center_cable_management_duct](davidauvergne/Center_cable_management_duct) | Mod for a centered cable management | V2.4 | 2024-01-08T16:38:25+00:00 | +| DC67 | [Plug Panel Mod for Schaffner...](DC67/plug_panel_schaffner) | A modified plug panel for the Power Entry Connector Schaffner... | V2.4 | 2024-01-08T16:38:25+00:00 | +| deepfriedheroin | [v0 Wago Bed Mounts](deepfriedheroin/v0_bed_wagos) | Easy to install Wago mounts for the v0 | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [v0 Power Wagos](deepfriedheroin/v0_power_wagos) | Easy to install Wago mounts for v0 mains | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [V2 Bed Wagos](deepfriedheroin/v2_bed_wagos) | Wire management for the v2 bed | V2.4 | 2024-01-08T16:38:25+00:00 | +| dePrintinator | [HEPA Exhaust](dePrintinator/HEPA_Filter_Exhaust) | HEPA filter chamber exhaust replacement. | V1.8, V2.4, VT | 2024-01-08T16:38:25+00:00 | +| DerekBackus | [LED Strip Holder](DerekBackus/LED_Holder) | Simple bracket to mount an LED strip | | 2024-01-08T16:38:25+00:00 | +| | [Trident Right Skirt Switch](DerekBackus/Right_Skirt_Switch) | Moves power switch to right front skirt on the Trident | | 2024-01-08T16:38:25+00:00 | +| Derpimus | [V0.1 Block Handle](Derpimus/Block_handle_v0.1) | V0.1 Block Style Handle | V0.2 | 2024-01-08T16:38:25+00:00 | +| DorjeDorf | [Duet 3 3HC Din Bracket](DorjeDorf/Duet_3_3HC_Din_Bracket) | V2.4 Duet 3 3HC Din Bracket | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Duet 3 6HC Din Bracket](DorjeDorf/Duet_3_6HC_Din_Bracket) | V2.4 Duet 3 6HC Din Bracket | V2.4 | 2024-01-08T16:38:25+00:00 | +| doubletrouble | [V0 Skirt Mod](doubletrouble/V0_Skirt_Mod) | V0 Skirt Mod | V0.2 | 2024-01-08T16:38:25+00:00 | +| Dr-Info | [Corner Cable Cover with Drop Holes](Dr-Info/corner_cable_cover_with_drop_down_holes) | Corner cable cover around Z-idler with drop holes near z frame and... | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [V2.4 Rear Skirt Mod for Z-Drive...](Dr-Info/V2.4r2_Z-Drive_Motor_Tensioner_Mod_Rear_Skirts) | This mod enables the you to utilize the rear skirts, power and... | V2.4 | 2024-01-08T16:38:25+00:00 | +| DrGhetto | [Ghetto Panels](DrGhetto/GhettoPanels) | Printed panels for the Voron Zero | V0.2 | 2024-01-08T16:38:25+00:00 | +| eamars | [Stealthburner (RC1) Dragon...](eamars/stealthburner_crazy_dragon_toolhead) | The Stealthburner toolhead mount for Mellow Crazy, TriangleLab... | V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| eddie | [LED Bar Clip](eddie/LED_Bar_Clip) | Modular LED Clip for mounting LED Strip to 2020 Extrusions | V1.8, V2.4, VT | 2024-01-08T16:38:25+00:00 | +| | [V1.8 12mm Z Mod](eddie/V1.8_12mm_Z_Mod) | Add V1.8 option for 12mm Z rods | V1.8 | 2024-01-08T16:38:25+00:00 | +| edwardyeeks | [Tridentified V2.4 Power Inlet](edwardyeeks/Tridentified_V2.4_Power_Inlet) | Trident style side power inlet for V2.4 using Z Drive Motor... | V2.4 | 2024-01-08T16:38:25+00:00 | +| elcrni | [Trident Internal Spool Holder](elcrni/Trident_Internal_Spool_Holder) | Internal spool holder for 300 and 350 Tridents. Supports full size... | VT | 2024-01-08T16:38:25+00:00 | +| | [V.24/Trident Spool Holder](elcrni/V2.4-Trident-Spool-Holders) | Spool holder that mounts on top for "too close to the wall" printers | V1.8, V2.4, VT | 2024-01-08T16:38:25+00:00 | +| Electroleon | [U2C Mounting](Electroleon/U2C_Mounting) | Bigtreetech U2C CAN Interface mounting bracket | V0.2, V1.8, V2.4, VT | 2024-01-08T16:38:25+00:00 | +| Ellis | [15x15 Drag Chain End](Ellis/15x15_Drag_Chain_End) | 15x15 drag chain end piece | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Badge Retractor Mount](Ellis/Badge_Retractor_Mount) | Extrusion mount for badge retractor to keep bowden tube out of the... | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Bed Fans](Ellis/Bed_Fans) | Bed fan control macros and 5015 bed fan mounts | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Short Z Joints](Ellis/Short_Z_Joints) | Shorter Z joints for the v2.4 | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Single MGN9H Carriage](Ellis/Single_MGN9H_Carriage) | Single MGN9H toolhead carriage with toolhead x endstop support (for... | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | +| ElPoPo | [Removable Doors](ElPoPo/RemovableDoors) | New hinge to easily remove the door and have a wide opening V2.x | V2.4 | 2024-01-08T16:38:25+00:00 | +| EmJay276 | [Stealthburner Phaetus Dragon UHF...](EmJay276/stealthburner_dragon_UHF_toolhead) | This mod adds a tool cartridge for the Phaetus Dragon UHF and... | V2.4, VT | 2024-01-08T16:38:25+00:00 | +| Empusas | [Mounts for BTT Filament Motion...](Empusas/BTT_Filament_Motion_Sensor_Mount) | Mounts for Big Tree Tech Smart Filament Motion Sensor | V0.2, V1.8, V2.4, VSW | 2024-01-08T16:38:25+00:00 | +| | [Power Skirt 2.x FN284-10-06](Empusas/PowerSkirt_FN284-10-06) | Power Skirt for Schaffner FN284-10-06 V2.x | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Mounts for Terminal Blocks NC933...](Empusas/Terminal_Blocks_NC933_SPL-62) | Mounts for Terminal Blocks NC933 and SPL-62 from AliExpress | V2.4 | 2024-01-08T16:38:25+00:00 | +| evandepol | [Crydom GN Terminal Guard](evandepol/Crydom-GN-Guard) | A simple safety guard for the terminals on a Crydom GN SSR | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Voron 2.4 cable clamps](evandepol/Voron2.4-Cable-clamps) | A set of 2020-mounted cable guards to organize and dress the wiring... | V2.4 | 2024-01-08T16:38:25+00:00 | +| falo | [LGX Lite CAN Side Mount](falo/lgx_lite_side_can) | A side mounting for a CAN board (Huvud/SHT42) to the LGX Lite | V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| | [Magnetic Exhaust Grill Cover](falo/magnetic_grill_cover) | A magnetic cover to seal the filtered exhaust | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Toolhead PCB to CAN Mount Adaptor](falo/toolhead_pcb_to_can) | A mount to enable side mounting of a CAN board (Huvud/SHT42) in... | V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| Ferdi360 | [2.4 Bedfan Backplates](Ferdi360/2.4_Bedfan_Backplates) | Backplates for your Voron 2.4 that block hot air out of your... | V2.4r2 | 2024-01-08T16:38:25+00:00 | +| Fiction | [C270 mount](Fiction/C270_mount) | Logitech C270 webcam front-centre mount | V2.4, VT | 2024-01-08T16:38:25+00:00 | +| | [Crossrail](Fiction/Crossrail) | Across-the-rails LRS-200-24 or RSP-200-24 mount using DRP-03 brackets | V2.4, VT | 2024-01-08T16:38:25+00:00 | +| | [Exhaust_cover](Fiction/Exhaust_cover) | Cover for exhaust cutout in back panel | V2.4, VT | 2024-01-08T16:38:25+00:00 | +| | [Exhaust_cover_SFS](Fiction/Exhaust_cover_SFS) | Exhaust cover and BTT Smart Filament Sensor mount | V2.4, VT | 2024-01-08T16:38:25+00:00 | +| | [LGX Lite toolhead PCB mount](Fiction/LGX_Lite_toolhead_PCB_mount) | Mount for Hartk's toolhead PCB(s) for LGX Lite | V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| filotto78 | [6mm slot cover](filotto78/6mm_slot_cover) | Simple cover for extrusion with 6mm slot width | V2.4 | 2024-01-08T16:38:25+00:00 | +| frankaf | [Euclid Probe Carriage](frankaf/mgn12-euclid) | A MGN-12 carriage with an inset mount for a Euclid Probe | V1.8, V2.4, VT | 2024-01-08T16:38:25+00:00 | +| FreeformFez | [V1.8 Filtered Power Inlet](FreeformFez/FilteredPower) | V1.6 Filtered Inlet and Rocker Switch for V1.8 | V1.8 | 2024-01-08T16:38:25+00:00 | +| GadgetAngel | [Bed Support Extrusions Alignment...](GadgetAngel/Bed_Support_Alignment_Tools) | The bed support alignment tools will assist in helping align the... | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Cricut Voron Logos](GadgetAngel/Cricut_Voron_Logos) | For any cutting machines or machines that rely on vector graphics... | V0.2, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| Galvanic | [Bowden Tube Guide](Galvanic/Bowden_Tube_Guide) | Bowden tube guide and CANBUS wire support | V1.8, V2.4, VT | 2024-01-08T16:38:25+00:00 | +| gamebofh | [Laser cut door panels](gamebofh/door-panels) | Files to allow you to create laser cut door panels with some... | VSW | 2024-01-08T16:38:25+00:00 | +| gauravmm | [Crazy Mozzie HF toolhead SB+CW2](gauravmm/crazy_mozzie_cw2) | Toolhead for Crazy Mozzie HF, compatible with Stealthburner and... | V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| gen2eng | [Switchwire LED wire pass through](gen2eng/z_carriage_stop_pass_through) | Z Carriage Stop modification that makes pass through of wires for... | VSW | 2024-01-08T16:38:25+00:00 | +| geoffreyyoung | [Dual Rail Installation Guide](geoffreyyoung/dual_rail_guide) | Rail installation guide that also works for the 2.4 dual rail... | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [LGX Info, Links, and Models](geoffreyyoung/lgx) | Useful information and models for using the Bondtech LGX extruder... | V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| gerritwellen | [Manta M8P Mount](gerritwellen/manta-m8p-bracket) | Mounting Bracket for BTT Manta M8P | V2.4, VT | 2024-01-08T16:38:25+00:00 | +| GiulianoM | [Fly F407ZG Mount](GiulianoM/FlyF407ZG) | Mount for the Fly F407ZG: https://github.com/FLYmaker/FLYF407ZG | V2.4 | 2024-01-08T16:38:25+00:00 | +| Gizzle | [Ender 3 and Ender 3 Pro...](Gizzle/ender-3_pro_switchwire) | Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics... | VSW | 2024-01-08T16:38:25+00:00 | +| golas | [V0.1 Extended tophat hinge](golas/v0-extended-tophat-hinge) | Extended tophat for v0.1 with hinges (integrated or screwed ones). | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [V0.1 Trident skirt remix with...](golas/v0-trident-skirt-mix) | Trident style v0.1 skirt mix with 12864 Mini Lcd on front or plain... | V0.2 | 2024-01-08T16:38:25+00:00 | +| GSL12 | [Pocketwatch Nema 17](GSL12/pocketwatch_nema17) | Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe... | | 2024-01-08T16:38:25+00:00 | +| hartk1213 | [Voron0.2 2.8 Waveshare Display](hartk1213/Voron0.2_2.8_WaveshareDisplay) | 2.8 Waveshare display for V0.2 | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Voron0.2 Rear Keystone Skirt](hartk1213/Voron0.2_Rear_Keystone_Skirt) | Added keystone slot on rear skirt for V0.2 | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Voron0 C14Inlet](hartk1213/Voron0_C14Inlet) | Added a new Power inlet that uses a Fused C14 plug and switch that... | V0.1 | 2024-01-08T16:38:25+00:00 | +| | [Voron0 deck panel](hartk1213/Voron0_deck_panel_with_logo_and_VORON0) | Used @Kruppes blank deck panel to add the logo as well as the name... | V0.1 | 2024-01-08T16:38:25+00:00 | +| | [Voron0 display dualcolor](hartk1213/Voron0_display_dualcolor) | Added a dual color file for the Voron Display Front housing | V0.1 | 2024-01-08T16:38:25+00:00 | +| | [Voron0 ExtendedLegs](hartk1213/Voron0_ExtendedLegs) | New extended legs to raise the printer up a tiny bit more | V0.1 | 2024-01-08T16:38:25+00:00 | +| | [Voron0 ExtrusionSkirt](hartk1213/Voron0_ExtrusionSkirt) | Created a new skirt design that uses 50mm extrusions as legs and it... | V0.1 | 2024-01-08T16:38:25+00:00 | +| | [Voron0 Hinged Top Hat](hartk1213/Voron0_Hinged_Top_Hat) | Created a new hinged top hat design for the V0 so it can fold away... | V0.1 | 2024-01-08T16:38:25+00:00 | +| | [Voron0 MGN9C X Axis](hartk1213/Voron0_MGN9C_X_Axis) | This mod, replaces the stock MGN7H for MGN9C on the V0 | V0.1 | 2024-01-08T16:38:25+00:00 | +| | [Voron2.4 GE5C](hartk1213/Voron2.4_GE5C) | This mod replaces the stack of printed z joints with a metal... | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Voron2.4 SexBolt ZEndstop](hartk1213/Voron2.4_SexBolt_ZEndstop) | This mod replaces stock V2 Z endstop with a different style | V2.4, VT | 2024-01-08T16:38:25+00:00 | +| | [Voron2.4 and Trident Pins Mod](hartk1213/Voron2.4_Trident_Pins_Mod) | This mod replaces all the M5 screws for all idlers/pulleys/bearings... | V2.4, VT | 2024-01-08T16:38:25+00:00 | +| | [Voron2.4 Y Endstop Relocation](hartk1213/Voron2.4_Y_Endstop_Relocation) | This mod relocates the Y endstop to the top A drive piece | V2.4 | 2024-01-08T16:38:25+00:00 | +| henrikssn | [Parametric Spool Holder](henrikssn/parametric_spool_holder) | Spool holder where the length is a parameter. | V1.8, V2.4, VT | 2024-01-08T16:38:25+00:00 | +| | [Plug Panel Mod for Generic...](henrikssn/plug_panel_generic) | v2.4 plug panel for generic unfiltered modules with 66mm x 27mm... | V2.4 | 2024-01-08T16:38:25+00:00 | +| hergtoler | [Exhaust Housing for 120mm Fan...](hergtoler/exhaust_120mm_duct) | v2.4 Exhaust Housing for 120mm Fan and 4in Duct | V2.4 | 2024-01-08T16:38:25+00:00 | +| hernsl | [Bottom Panel Mag Clip](hernsl/bottom_panel_mag_clip) | v2.4 magnetic clips to retain bottom panel | V2.4 | 2024-01-08T16:38:25+00:00 | +| hhammarstrand | [Afterburner connector cover for...](hhammarstrand/afterburner_connector_cover_42STH20-1004AS) | Connector cover for 42STH20-1004AS | VSW | 2024-01-08T16:38:25+00:00 | +| hijax_pl | [Corner panel clip](hijax_pl/corner_panel_clip) | V2 panel corner frames using 3-way L brackets in the corners | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Din Rail mount](hijax_pl/din_rail_mount) | Adapter to attach DIN Rail to 2020 extrusion. | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Controler Board adapters](hijax_pl/ender_compatible_controller_mount) | DIN (rotated) and legacy adapters for boards like SKR mini E3. | V2.4 | 2024-01-08T16:38:25+00:00 | +| Hobson318 | [Belt Tension Wrench](Hobson318/Belt_Tension_Wrench) | Wrench for easier turning of the belt tension knobs on V0.1 | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Klipper Expander Mount](Hobson318/Klipper_Expander_Mount) | Mounting brackets for the klipper expander using vhb tape or... | V0.2, V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| hoschi | [FYSETC Spider DIN Rail Mount](hoschi/FYSETC_Spider_DIN_Mount) | DIN rail mount for FYSETC Spider | V2.4 | 2024-01-08T16:38:25+00:00 | +| hymness1 | [10x11mm chain VSW](hymness1/10x11mm_chain_VSW) | Printable and openable 10x11mm chain | V0.2, VSW | 2024-01-08T16:38:25+00:00 | +| | [Quickdraw probe Voron Switchwire](hymness1/Quickdraw_probe_Voron_Switchwire) | Detachable magnetic probe with docking system for VSW | VSW | 2024-01-08T16:38:25+00:00 | +| Iakabos | [c920 Mount](Iakabos/C920_mount) | Slim mount for logitech c920 webcam | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | +| | [V0 beltchains](Iakabos/V0_beltchain) | Modified beltchain parts for V0 Z cables | V0.2 | 2024-01-08T16:38:25+00:00 | +| iblue | [V0.1 Tophat Extractor](iblue/TophatExtractor) | Tophat Extractor for the Voron V0.1 with activated charcoal and... | V0.2 | 2024-01-08T16:38:25+00:00 | +| jangrewe | [Bitter USB Cam](jangrewe/Bitter_USB_Cam) | Modification of the "Angry Cam USB v2.0" webcam mount for 1515... | V0 | 2024-01-08T16:38:25+00:00 | +| jappaj | [V0.1 FanSaver](jappaj/FanSaver) | A printable fix for overheating V0.1 blower fans | V0.2 | 2024-01-08T16:38:25+00:00 | +| jasonc | [V2.4 Z-Idler Shoulder Bolt Mod](jasonc/Z_Idler_Shoulder_Bolt) | Modification to the idler carriers to accept a 25mm shoulder bolt.... | V2.4 | 2024-01-08T16:38:25+00:00 | +| Jasrags | [Feed slot with filament pass-...](Jasrags/sw_fee_slot_filament_passthrough) | A feed slot with a filament pass-through | VSW | 2024-01-08T16:38:25+00:00 | +| jatson | [Plug panel mod for Schurter...](jatson/plug_panel_schurter) | A modified plug panel for Voron 2.4r1 with Schurter CD44.1101.151... | V2.4 | 2024-01-08T16:38:25+00:00 | +| jaysuk | [4.3 Fly Screen Mount](jaysuk/4.3_fly_screen_mount) | A mount for a 4.3" Fly Screen | V0, V0.1 | 2024-01-08T16:38:25+00:00 | +| JD | [V2.4 Filament runout sensor](JD/RefillPlease) | Replace the 2.4 stock bowden tube holder and add a filament runout... | V1.8, V2.4, VT | 2024-01-08T16:38:25+00:00 | +| jeoje | [4.3" Touchscreen Mount](jeoje/4.3_Inch_Touchscreen_Mount) | Mounts a [Waveshare 4.3inch Capacitive Touch... | V2.4, VSW | 2024-01-08T16:38:25+00:00 | +| | [Molex MLX and Microfit 3.0 Bed...](jeoje/Molex_MLX_Microfit_Bed_Connector_Mount) | Solid mount your bed connectors | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Sturdy Handles](jeoje/Sturdy_Handles) | Modified v2.2 handles with no panel rest and with 4 anchor points | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [V2.4 Z Chain Guide with...](jeoje/Z_Chain_Guide_Thermistor_Mount) | Modifies the Z chain guide to hold a chamber thermistor | V2.4 | 2024-01-08T16:38:25+00:00 | +| JeremyRuhland | [V2.4 Plug Panel Generic Combo](JeremyRuhland/V2.4_Plug_Panel_Generic_Combo) | Skirt power panel for generic amazon plug/switch/fuse combo module,... | V2.4 | 2024-01-08T16:38:25+00:00 | +| jgehrig | [V0 LCD Touchscreen Skirt](jgehrig/v0_lcdskirt) | 3.2" LCD Touch Screen Skirt | V0.2 | 2024-01-08T16:38:25+00:00 | +| JJFX | [V2.4 CR Touch Snap Mount](JJFX/CRTouch_Snap_Mount) | Mount to replace v2.4 (MGN9) probe with a Creality CR Touch | V2.4 | 2024-01-08T16:38:25+00:00 | +| JNP | [Back Door](JNP/Back-Door) | Door for easy hardware access | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Deck Panel](JNP/Deck_Panel_Rear) | Covers the hotbed cables | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Drawer](JNP/Drawer) | Drawer in four different versions | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Front Door](JNP/Front-Door) | Door in a frame | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Hepa Filter](JNP/HEPA-Filter) | Filter case with fan´s | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Mid Panel](JNP/Mid-Panel) | Panel for SKR1.4/1.4 or SKR E3 mini mount | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Neopixel Case](JNP/Neopixel-Y_Rails) | mounting for Neopixel strip with 8 LED´s | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Side Panels](JNP/Side-Panels) | Panels with intergrated hinge | V0.2 | 2024-01-08T16:38:25+00:00 | +| johanncc | [Raspberry Pi Camera Mount](johanncc/Raspberry_Pi_Camera_Mount) | Low profile raspberry pi camera mount | V0.2 | 2024-01-08T16:38:25+00:00 | +| Jon | [1515 LED Mount](Jon/1515_led_mount) | Snap in 1515 Led mount for WS2812B | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [adxl345 skirt keystone](Jon/adxl345_skirt_keystone) | Skirt keystone for ADXL345 using Microfit 3.0 | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Z Cover for v0.1](Jon/V0.1_Z_Cover) | A cover to stop things from dropping down the Z motor and... | V0.1 | 2024-01-08T16:38:25+00:00 | +| joposter | [V0 Clippable LED Caselight](joposter/v0_clippable_ledmounts) | LED Case light for the V0 that clips into the extrusions | V0.2 | 2024-01-08T16:38:25+00:00 | +| JosAr | [Klicky Probe](JosAr/Klicky-Probe) | Microswitch based inductive probe replacement | V0.2, V1.8, V2.4, VT | 2024-01-08T16:38:25+00:00 | +| KenadyDwag44 | [Switchwire Lightbar](KenadyDwag44/sw_lightbar) | A LED lightbar for switchwire | VSW | 2024-01-08T16:38:25+00:00 | +| KevinAkaSam | [VEFACH](KevinAkaSam/VEFACH) | Voron Exhaust Filter Inserts for Activated Coal + Hepa | V2.4, VT | 2024-01-08T16:38:25+00:00 | +| khay | [V0 Micro Backplate](khay/micro_backplate) | Minimalistic backplate for cooler motors and electronics | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Fan for V2-200mm²](khay/V2-200_4020_Electronics_Fan) | Middle Skirt for V2-200mm² Electronics Compartment | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [3x Keystone PlugPanel](khay/V2_3x_Keystone_Plugpanel) | PlugPanel with Options for 3 Keystones | V2.4 | 2024-01-08T16:38:25+00:00 | +| KiloQubit | [Trident Schurter Inlet Skirt](KiloQubit/trident_schurter_power_inlet) | Trident inlet skirt for mounting a Schurter DD11.0124 or similar inlet | VT | 2024-01-08T16:38:25+00:00 | +| | [V0 Reverse Bowden Mount](KiloQubit/V0_reverse_bowden_mount) | V0 reverse bowden mount | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [V2.4 Z Chain Mounts for 3 Hole...](KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts) | Z chain mounts for 3 hole generic chain | V2.4 | 2024-01-08T16:38:25+00:00 | +| kirby | [V0 Sherpa Mini Direct Drive Mod](kirby/v0_sherpa_mini_direct_drive) | A direct drive mod for the V0 using the Annex Sherpa Mini extruder | V0.2 | 2024-01-08T16:38:25+00:00 | +| Koios | [6mm Tempered Glass Mod](Koios/6mm_Glass) | Lock levers and rests for 6mm Tempered glass panels | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [C920 Low Profile Mount](Koios/C920_Mount) | Low profile mount for a C920 Webcam | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [LED Bar Mounts](Koios/LED_Mounts) | Low profile mount for led bar lights | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [V0 C920 Tophat Mount](Koios/V0_C920_Tophat_Mount) | Mounting bracket for a Logitech C920 on the tophat | V0.2 | 2024-01-08T16:38:25+00:00 | +| Kosh42EFG | [Kirigami bed front](Kosh42EFG/kirigami_bed_front) | Printed bed front for kirigami folded metal bed mount with Voron logo. | V0.2 | 2024-01-08T16:38:25+00:00 | +| Kruppes | [Encosed Bottom](Kruppes/Closed_Bottom) | Modified printed parts and panel to fully enclose V0. | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [V0 Printed Deck with inserts](Kruppes/Deck_Panel_inserts_logo) | Electronics Deck Panel using brass heat inserts. Optional with... | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Belt Tension Meter](Kruppes/Tension_Meter) | Print in place tension meter to easily tighten multiple belts to... | V0.2, V1.8, V2.4, VSW | 2024-01-08T16:38:25+00:00 | +| Kyleisah | [CableGator Cable Comb](Kyleisah/CableGator) | A cable comb for simplifying and tidying wire harnesses for... | V0.2, V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| lakai | [Bruag Skirts](lakai/Bruag_Skirts) | V2 350mm skirts inspired by Bruag Facades | V2.4 | 2024-01-08T16:38:25+00:00 | +| Le0n | [Magnetic panels with Magnet Inserts](Le0n/Magnetic_Panels_with_Magnet_Inserts) | Magnetic panel mounts with magnets inserted into frame slots. | V1.8, V2.4, VT | 2024-01-08T16:38:25+00:00 | +| leandromarceddu | [PowerSkirt](leandromarceddu/PowerSkirt) | Modified skirtpiece for a digital power monitor | V2.4 | 2024-01-08T16:38:25+00:00 | +| Liselotte111 | [Red Lizard K1 UHF toolhead](Liselotte111/Red_Lizard_K1_UHF) | SB toolhead for Red Lizard K1 UHF | V2, VT | 2024-01-08T16:38:25+00:00 | +| littleferris | [V0 c14 Skirt Inlet](littleferris/V0_Skirt_Inlet) | V0 C14 Skirt inlet | V0.2 | 2024-01-08T16:38:25+00:00 | +| LJ | [Scrubby](LJ/Scrubby) | Easy to use filament dust filter | V0.2, V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| LoCoCNC | [3mm Top Hat Panels Clips](LoCoCNC/3mm_tophat_panel_parts) | Required to use the 3mm (1/8") thick top hat panels for V0.1 | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [MGN7H Shims](LoCoCNC/MGN7H_Shims) | Shims for making bearing cartridges coplanar | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Mosquito PTFE 15mm Tube Cutting Jig](LoCoCNC/Mosquito_PTFE_Cutting_Jig) | Tool to precicely cut 15mm PTFE Tube | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [SSR Mounting Strap](LoCoCNC/ssr_strap) | Mounting Strap for SSR on 1515 Extrusions | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Strain Relief w/ 10 Pin Microfit](LoCoCNC/Strain_Relief_w_Microfit) | Strain Relief with 10 pin Microfit connector | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [V2.4 Bed Wiring Grommet](LoCoCNC/wire_grommets) | Safely capture your bed wires thru the bottom panel | V2.4 | 2024-01-08T16:38:25+00:00 | +| LoganFraser | [ComboInlet](LoganFraser/ComboInlet) | Skirt pieces for Trident, 2.4 and 2.4r2 for combo inlets in 2 sizes. | V2.4, VT | 2024-01-08T16:38:25+00:00 | +| | [HorseshoeSpoolHolder](LoganFraser/HorseshoeSpoolHolder) | Horseshoe Spool Holder - mounts internally for Trident, or... | V0.2, V1.8, V2.4, VT | 2024-01-08T16:38:25+00:00 | +| | [PiPlate](LoganFraser/PiPlate) | PiPlate - Raspberry Pi3,4 mounting plate and Skirt Mod for... | V2.4, VT | 2024-01-08T16:38:25+00:00 | +| | [Trident Inverted Electronics](LoganFraser/TridentInvertedElectronics) | Flip the Trident electronics bay for top access. | VT | 2024-01-08T16:38:25+00:00 | +| | [WagoMounts](LoganFraser/WagoMounts) | Wago Mounts for Din Rail or 2020 Extrusion mounting. | V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| Long | [Mantis Dual 5015 Toolhead](Long/Mantis_Dual_5015) | MGN12 Dual 5015 Toolhead for 2.4 & 1.8 | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | +| Lukas | [SSD1306 Case Front Cover](Lukas/SSD1306_Case_Front_Cover) | SSD1306 Mount replacement for Mini12864 | V2.4, VT | 2024-01-08T16:38:25+00:00 | +| Mac10goesBRRRT | [PiTFT Mount](Mac10goesBRRRT/BTT_PiTFT) | Mount for the BTT PiTFT Touchscreen | V2.4, VT | 2024-01-08T16:38:25+00:00 | +| madfabrications | [Vertical PSU Mount](madfabrications/Vertical_PSU_Mount) | Mounts the PSU vertically on the DIN rails | V2.4 | 2024-01-08T16:38:25+00:00 | +| madros | [V0 OLED-skirt](madros/V0_skirt_OLED) | V0 skirt with 0.96" OLED | V0.2 | 2024-01-08T16:38:25+00:00 | +| Majarspeed | [Hartk board mount galileo](Majarspeed/Hartk_Mount_Galileo) | It hangs stuff on your tool | V2.4 | 2024-01-08T16:38:25+00:00 | +| MakeALeft | [Switchwire Clean Center Grill](MakeALeft/Switchwire_Front_Grill) | Removed magnet holders on center panel for cleaner look | | 2024-01-08T16:38:25+00:00 | +| MapleLeafMakers | [Kirigami Stealth Bumper](MapleLeafMakers/Kirigami_Stealth_Bumper) | an RGB-Powered front-bed mount for the Voron V0 with Kirigami Bed... | V0 | 2024-01-08T16:38:25+00:00 | +| | [Matchstick Diffusers](MapleLeafMakers/Matchstick_Diffusers) | Mounts and Diffusers for the popular "on-a-matchstick" LEDs | V0 | 2024-01-08T16:38:25+00:00 | +| | [Modesty Mesh](MapleLeafMakers/Modesty_Mesh) | Customizable mesh inserts to hide your messy electronics compartment. | V0 | 2024-01-08T16:38:25+00:00 | +| | [Rainbow Serial Bumper](MapleLeafMakers/Rainbow_Serial_Bumper) | Just a little bit of extra bling for your Voron Trident | VT | 2024-01-08T16:38:25+00:00 | +| | [Stealth Handles](MapleLeafMakers/Stealth_Handles) | Stealthy and stylish handles for your V0 | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Umbilical Collar](MapleLeafMakers/Umbilical_Collar) | An adjustable umbilical collar for the stock motor panel on the V0 | V0 | 2024-01-08T16:38:25+00:00 | +| | [Upper Rear Bowden Inlet (URBI)](MapleLeafMakers/URBI) | A Reverse Bowden Inlet for the upper-rear panel of the Voron Zero... | V0 | 2024-01-08T16:38:25+00:00 | +| MasturMynd | [Stealth Zero](MasturMynd/V0.1-Stealth_Zero) | A low poly gantry with front tensioners and optional front mounted... | V0.1 | 2024-01-08T16:38:25+00:00 | +| | [2-Piece Z Tensioners](MasturMynd/V2-2-Piece_Z_Tensioners) | Splits the tensioners into two pieces, allowing the tensioner to be... | V2 | 2024-01-08T16:38:25+00:00 | +| MathematicalPotato | [V0.1 Belted Z Drive](MathematicalPotato/v0.1_belted_z_drive) | Conversion to a belted Z axis for the V0.1 adapted from... | V0.2 | 2024-01-08T16:38:25+00:00 | +| Maverick | [MiniSB_LGXL](Maverick/MiniSB_LGX_Lite) | A Bondtech LGX Lite variant of the MiniSB | V0.2, V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| | [MiniSB_Rapido](Maverick/MiniSB_Rapido) | Modified MiniSB to use a Rapido hotend | V0.2, V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| | [MiniSB_Sharkfin](Maverick/MiniSB_Sharkfin) | Modified MiniSB to use a Sharkfin Extruder | V0.2, V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| | [V0.2 Stealth Skirts](Maverick/V0.2_Stealth_Skirts) | Juiced up skirts for the V0.2 | V0.2 | 2024-01-08T16:38:25+00:00 | +| maximilian-foerg | [Afterburner Turbo Mod](maximilian-foerg/AB_Turbo_Mod) | A purely cosmetic mod for Afterburner | V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| | [Switchwire Double 60mm Fan Mount](maximilian-foerg/VSW_Double_60mm_Fan_Mount) | A mount for two (or four) 60mm fans in SW's electronics compartment | VSW | 2024-01-08T16:38:25+00:00 | +| Mckurt | [Switchwire Y Belt Tensioner](Mckurt/Switchwire_Y_Belt_Tensioner) | Switchwie Y axis Belt Tensioner | VSW | 2024-01-08T16:38:25+00:00 | +| MCMBen | [Voron0 Block & Tackle Z Belt](MCMBen/Voron0_Block_and_Tackle_Z_Belt) | A block & tackle belted Z solution using NEMA14. Ratios from 5:1 to... | V0.2 | 2024-01-08T16:38:25+00:00 | +| Mellow | [V0 Fly-Gemini](Mellow/V0_Fly-Gemini) | Fly-Gemini adapted model for V0 | V0.2 | 2024-01-08T16:38:25+00:00 | +| mikepthomas | [MKS Mosfet Mount](mikepthomas/MKS_Mosfet_Mount) | MKS Mosfet Mount based of the Trident Raspberry Pi Mount. | V1.8, V2.4, VT | 2024-01-08T16:38:25+00:00 | +| MikesMods | [LGX mount for V0.1 with 2nd X rail](MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail) | V0.1 mod for mounting Bondtech LGX extruder with addition of 2nd X... | V0.2 | 2024-01-08T16:38:25+00:00 | +| Minsekt | [Rear Umbilical](Minsekt/Rear_Umbilical) | Rear Umbilical mounting solution including a relocated Y-Endstop | V2.4 | 2024-01-08T16:38:25+00:00 | +| mjoaris | [10x11 Cable Chain Endcaps](mjoaris/10x11_Cable_Chain_Endcaps) | Printable Endcaps for 10x11 Cable Chains | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Mini12864 LCD Mount](mjoaris/Mini12864_LCD_Mount_for_V2.4) | Swiveling case for the Fysetc Mini12864 LCD | V2.4 | 2024-01-08T16:38:25+00:00 | +| mosher | [Door hinges with M3 screws shafts](mosher/m3_door_hinges) | Simple mod of print in place door hinges, which uses m3 screws as... | V2.4 | 2024-01-08T16:38:25+00:00 | +| mpfl | [V0.1 OLED-skirt](mpfl/V0.1_skirt_OLED) | V0.1 skirt with 0.96" OLED | V0.2 | 2024-01-08T16:38:25+00:00 | +| MrBean66 | [SKR Pro DIN Mount](MrBean66/SKR_PRO_Mount) | Simple mod to mount the SKR Pro board from BTT to a DIN rails. | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | +| MrDespair | [MiniAB Pinda Probe Mount](MrDespair/MiniAB_Pinda) | Replacement MiniAB Cowling to add a mount for a Pinda style probe. | V0.2 | 2024-01-08T16:38:25+00:00 | +| Mrgl-Mrgl | [LGX Lite Mount](Mrgl-Mrgl/LGX_Lite_Mount) | a mount for the LGX Lite | V1.8, V2.4, VT | 2024-01-08T16:38:25+00:00 | +| MSA | [Belt tension helper](MSA/V0-Belt-tension-helper) | Belt tension helper for V0.1 | V0.2 | 2024-01-08T16:38:25+00:00 | +| MSiemons | [Tophat Hinge V0](MSiemons/TophatHingeV0.1) | Simple hinge for V0 Tophat | V0.2 | 2024-01-08T16:38:25+00:00 | +| muradir | [Zodiac BMO Stealthburner Toolhead](muradir/Zodiac_BMO_Stealthburner_Toolhead) | A Stealthburner toolhead for the Zodiac BMO Hotend, based on the... | V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| Nashuar | [V0 Dragon Toolhead M2.5x8](Nashuar/V0_Dragon_ToolheadStockScrews) | This toolhead uses the stock M2.5 screw that came with the dragon... | V0.2 | 2024-01-08T16:38:25+00:00 | +| natewalck | [V1.8 Jigs](natewalck/v1.8_Jigs) | Jigs for assembling V1.8 | V1.8 | 2024-01-08T16:38:25+00:00 | +| nhchiu | [V0.1 Movable Pulley Z Drive](nhchiu/V0.1_Movable_Pulley_Z) | A movable pulley system on the Z axis with 1:8 total speed ratio... | V0.1 | 2024-01-08T16:38:25+00:00 | +| nikolasbabetas | [Neopixel Holder](nikolasbabetas/Neopixel_Holder) | A holder to attach Neopixel/WS2812B Led Strips to the V0.1 | V0.1 | 2024-01-08T16:38:25+00:00 | +| Nomsplease | [60mm Shaft Jig](Nomsplease/60mm_Shaft_Jig) | Simple jig for cutting and grinding 60mm Z shafts | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Duet Wifi Mount](Nomsplease/V0_duet_wifi_mount) | Duet wifi mount in pocketwatch location | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [LED Mounts](Nomsplease/V0_led_mounts) | Basic LED mounts for 10 and 12mm strips | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Remixed Panel Mounts](Nomsplease/V0_panel_mounts) | Remixed rear bottom panel mounts with stop | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Pi Cam/ZeroW Mount](Nomsplease/V0_pi_zero_camera_mount) | Mount for pi camera and ZeroW | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Pocket Watch Rear Reolcation...](Nomsplease/V0_pocket_watch_rear_relocation) | Pocket watch rear reolcation bracket | V0.2 | 2024-01-08T16:38:25+00:00 | +| Oakman | [BTT 24V UPS Metal DIN Mount](Oakman/BTT_24V_UPS_Metal_DIN_Mount) | Adapter to use a metal DIN mount for the BTT 24V UPS | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | +| | [FYSETC Spider Metal DIN Mount](Oakman/FYSETC_Spider_Metal_DIN_Mount) | Use a metal DIN mount for your FYSETC Spider | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | +| | [RPI Metal DIN Mount](Oakman/RPI_Metal_DIN_Mount) | Adapter for metal DIN mounting the Raspberry Pi | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | +| OboMaker3D | [C17-EXT Filter HEPA Carbon](OboMaker3D/C17-EXT) | Replaces standard filter with new HEPA Crabon and 120mm fan V1.1 | V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| | [C17-EXT-CARTRIDGE for C17-EXT...](OboMaker3D/C17-EXT-CARTRIDGE) | Alternative to a commercial cartridge for the C17-EXT filter | V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| ommy | [roller brackets](ommy/roller_brackets) | Brackets to help rolling V2 on its side. | V2.4 | 2024-01-08T16:38:25+00:00 | +| oxno | [RBP Zero Bracket](oxno/rbp_zero_braket) | Bracket for Raspberry pi zero. | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | +| padok | [Chain Anchor - ADXL345 mount Mod](padok/chain_anchor-ADXL345_mount) | A ADXL345 mount for the Afterburner | V2.4 | 2024-01-08T16:38:25+00:00 | +| Phalanx | ["Other" Idlers Mod](Phalanx/Other-V2-Idlers) | Allow usage of wider toolheads on the V2 | V2.4 | 2024-01-08T16:38:25+00:00 | +| piet206 | [V1.8 Z Rails Mod](piet206/V1.8._Z_Rails_Mod) | Add MGN12H linear rails for Z axis motion | V1.8 | 2024-01-08T16:38:25+00:00 | +| Polar-Ted | [V0.1 Z nozzle endstop switch](Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch) | Sexbolt style switch for V0 | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [V0.1 Two Piece Back Panel](Polar-Ted/V0_Two_Piece_Back_Panel) | Vented 2 piece back panel for V0 | V0.2 | 2024-01-08T16:38:25+00:00 | +| Polared | [Power Inlet with Keystone Insert](Polared/Power_Inlet_w_Keystone_Insert) | Voron 0.1 Power inlet with keystone insert slot | V0.2 | 2024-01-08T16:38:25+00:00 | +| ponkotsu1 | [V0 Launchpad Skirt](ponkotsu1/V0_Launchpad_Skirt) | Another style V0 skirt | V0 | 2024-01-08T16:38:25+00:00 | +| prasadp4009 | [StealthBurner CR Touch Mod](prasadp4009/SW_SB_CRTouch) | Voron SW StealthBurner CR Touch Mod | VSW | 2024-01-08T16:38:25+00:00 | +| Printopal | [Magnetic top panel](Printopal/Magnetic_top_panel) | Top panel with magnets allows for quick installation and removal | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | +| PsychoShaft | [C92X_PsycHoShafts_Mount](PsychoShaft/C92X_PsycHoShafts_Mount) | 2020 Top profile 920 camera mount / 2 point axis pivot | V1.8, V2.4, VT | 2024-01-08T16:38:25+00:00 | +| QuackProfit | [V0 Adafruit NeoPixel LED Mounts](QuackProfit/V0-Adafruit-Y_Rails) | Mount Adafruit PCB NeoPixel Sticks on the V0 Y-rail extrusions | V0.2 | 2024-01-08T16:38:25+00:00 | +| quattroerik | [V2.4 Door Hinge M3 3mm 180deg](quattroerik/front_door_m3_180_deg_3mm) | Voron 2.4 door hinges for 3mm panel, 180 deg opening and m3 screw... | V2.4, VT | 2024-01-08T16:38:25+00:00 | +| randell | [Door Hinges](randell/Door_Hinges) | Door hinges that use an M3 bolt for a pin and bolts thru the panel | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Microswitch Pod for PCB](randell/Microswitch_Endstop) | Modified endstop pod for use of endstop switches mounted on a PCB | V2.4 | 2024-01-08T16:38:25+00:00 | +| raymondh | [Large Spool Holders](raymondh/LargeSpoolHolders) | Larger spool holders for KVP spools | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | +| reapola | [MKS CANable Pro DIN Mount](reapola/MKS_CANable_Pro_mount) | MKS CANable Pro mount which mounts on a DIN rail | V0.2, V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| reQu1em00 | [Kirigami LED Bed Front](reQu1em00/Kirigami_LED_Bed_Front) | Kirigami bed front with space for a single LED or Neopixel button | V0.2 | 2024-01-08T16:38:25+00:00 | +| revnull | [Raspberry Pi 7inch Display Mount](revnull/rpi_7in_display_mount) | An articulating mount for the offical Raspberry Pi 7inch touch screen | V2.4 | 2024-01-08T16:38:25+00:00 | +| Rhastlyn | [60mm Fan Cover](Rhastlyn/60mmFanCover) | A easy to install cover for spec 60mm fans originally designed for... | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Wansview 1080p Camera Mount](Rhastlyn/WansviewCameraMount) | A camera mount that replaces the OEM part to allow the camera to be... | V2.4 | 2024-01-08T16:38:25+00:00 | +| richardjm | [ADXL drag chain mount](richardjm/adxl-chain) | Permanent mount for ADXL boards on the back of the motor, replacing... | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Back blanking plate](richardjm/back-plate) | Back blanking plate that can be used instead of the exhaust filter... | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [LED 15.5mm quarter round mounts](richardjm/led-mounts) | Mounting corners with integrated cable runs for 15.5mm quarter... | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Picam corner mount](richardjm/picam-corner) | Out of the way corner mounted picam | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Printable snap latches for 2020...](richardjm/snap-latch-2020) | Quick release panel latch inspired by the work of others. | V2.4 | 2024-01-08T16:38:25+00:00 | +| rngSplat | [Printable Switchwire Deck Plate](rngSplat/SW_Deck_Plate) | Print a deck plate for Switchwire with debossed Voron logo | VSW | 2024-01-08T16:38:25+00:00 | +| roboticator24 | [Touchscreen for OctoDash](roboticator24/4inch_touchscreen_mount_for_v2.4) | Mount a 4-inch LCD touchscreen to your V2.4 in place of the usual... | V2.4 | 2024-01-08T16:38:25+00:00 | +| RockNLol | [RockNRoll](RockNLol/RockNRoll) | Rockers to roll the printer on its back for easier access to the... | V2.4 | 2024-01-08T16:38:25+00:00 | +| rsheng118 | [BTT octopus DIN vertical mount](rsheng118/BTT_octopus_DIN_vertical_mount) | DIN vertical mount for Big Tech Tree Octopus board | V2.4 | 2024-01-08T16:38:25+00:00 | +| ruiqimao | [V0.2 MGN9C X Axis](ruiqimao/V0.2_MGN9C_X) | MGN9C linear rail for the X axis on V0.2 | V0 | 2024-01-08T16:38:25+00:00 | +| ryandam | [Cable Management Duct](ryandam/Cable_management_duct) | Zip tie mount intergrated cable duct to hide your cable | V0.2 | 2024-01-08T16:38:25+00:00 | +| sammynorway | [LGX stealthburner connector cover](sammynorway/LGX-stealthburner-connector-cover) | Cable cover for LGX and stealthburner | V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| samwiseg0 | [4 Channel Relay Under Deck Mount](samwiseg0/4channel_relay_under_deck_mount) | Mod to mount a 4 channel GPIO controlled relay | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [AB Plug (Microfit 1x4)](samwiseg0/ab_plug_microfit_1x4) | Mod to mount A & B motor connectors to the gantry | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Corner Cable Hide/Cover (LED Wires)](samwiseg0/corner_cable_hide) | Mod to hide cables around z idlers | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [ESP8266 NodeMCU Din Mount](samwiseg0/esp8266_nodemcu_din_mount) | Din mount for ESP8266 NodeMCU | V2.4, VT | 2024-01-08T16:38:25+00:00 | +| | [Extrusion/Chamber Thermistor Mount](samwiseg0/extrusion_thermistor_mount) | Extrusion mount for a NTC100K Thermistor extrusion | V0.2, V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| | [LRS PSU Screw Terminal Cover](samwiseg0/lrs_screw_terminal_cover) | Mod to cover the screw terminals for several LRS style PSUs | V0.2, V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| | [Microfit 2x3 Skirt Connector (ADXL)](samwiseg0/microfit_2x3_skirt_connector_adxl) | Mod for a Microfit 2x3 connector to be mounted in a skirt | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Corsair Flash Voyager GTX Din Mount](samwiseg0/voyager_gtx_din_mount) | Din carrier for a Corsair Flash Voyager GTX | V2.4, VT | 2024-01-08T16:38:25+00:00 | +| scanlory | [Clip-On Front Door Frame](scanlory/clip_on_door_frame) | Clip-on frame to stiffen and seal front door panels when using... | V2.4 | 2024-01-08T16:38:25+00:00 | +| ScramblerUSA | [Side Skirt Power Switch](ScramblerUSA/SideSkirtPowerSwitch) | Skirt-mounted rocker switch for easy access for Voron 2.4 | V2.4 | 2024-01-08T16:38:25+00:00 | +| See1807 | [TopHat Exhaust and LED Light](See1807/Voron_V0_Exhaust_and_LED_Mod) | A mount for 10mm LED strips and Exhaust for Voron V0 | V0.2 | 2024-01-08T16:38:25+00:00 | +| Shiftingtech | [Trident Dual Power Switch](Shiftingtech/Trident_dual_power_switch) | A replacement skirt, allowing 2 power switches | VT | 2024-01-08T16:38:25+00:00 | +| ShinyPants | [OrangePi 3 LTS DIN Rail bracket](ShinyPants/Orange_Pi_3_LTS_DIN) | A DIN rail mount for OrangePi LTS 3 | V1.8, V2.4, VT | 2024-01-08T16:38:25+00:00 | +| Shteeeeeve | [V0.1 LED Tophat](Shteeeeeve/V01-LED-Tophat) | V0.1 LED Tophat w/ 24V LED Lightstrip | V0.2 | 2024-01-08T16:38:25+00:00 | +| Slidr | [PanzerBalls 2.4](Slidr/PanzerBalls2.4) | Squash Ball Feet for V2.4 | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [PanzerChain 2.4](Slidr/PanzerChain2.4) | Energychain for V2.4 | V2.4 | 2024-01-08T16:38:25+00:00 | +| slitte | [PCB_Probe](slitte/PCB_Probe) | PCB for BAT85 and pull up resistor | V2.4, VT | 2024-01-08T16:38:25+00:00 | +| | [ssd_bracket](slitte/ssd_bracket) | bracket for mounting a 2.5" ssd to a din rail | V2.4, VT | 2024-01-08T16:38:25+00:00 | +| sloscotty | [Switchwire Wall Plate](sloscotty/SW_Wall_Plate) | SW plate for enclosure | VSW | 2024-01-08T16:38:25+00:00 | +| | [NoNutz TopHat Cam Extension](sloscotty/TopHat_Cam_Extension) | Tophat extension with integrated webcam for V0/0.1 | V0.2 | 2024-01-08T16:38:25+00:00 | +| spacelab2021 | [Orbiter Clockwork Mount](spacelab2021/Orbiter-Clockwork) | A clockwork adaptor for the Orbiter v1.5 Extruder with full... | V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| Spaghetti-Bolognese | [LCD Case Mod](Spaghetti-Bolognese/LCD_case_mod) | Improvements to the V2.4 mini12864 LCD case inc E-stop button cover | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Simplified Z Drive Motor Mount](Spaghetti-Bolognese/Z_drive_motor_mount) | Z drive motor mount bracket mod to improve pulley to belt alignment | V2.4 | 2024-01-08T16:38:25+00:00 | +| sse018 | [Octopus DIN Rail bracket](sse018/Octopus_DIN_Rail_bracket) | A Din rail mount for BTT Octopus board | V2.4 | 2024-01-08T16:38:25+00:00 | +| strayr | [Creality toolhead for stealthburner](strayr/stealthburner_creality_toolhead) | Use a creality ender 3 style hotend with stealthburner | V1.8, V2.4, VSW | 2024-01-08T16:38:25+00:00 | +| sttts | [Waveshare 5.5inch HDMI AMOLED Mount](sttts/Waveshare-5.5-inch-HDMI-AMOLED) | Mod to mount a Waveshare 5.5inch full HD display on a V2 | V2.4, VSW | 2024-01-08T16:38:25+00:00 | +| StvPtrsn | [Skirts for a 320mm Build](StvPtrsn/320mm_Build) | Skirts for a 320mm build | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Keystone Jack for Filtered Mains...](StvPtrsn/Keystone_Jack_Filtered_Mains_Panel) | Add a keystone jack to your filtered mains plug panel | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Parts_Jigs and Mods](StvPtrsn/Parts_Jigs_and_Mods) | Parts, Jigs and modifications I use for my builds | V0.2, V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| | [Side Fan Support, No Tape](StvPtrsn/Side_Fan_Support_No_Tape) | Mount the 60mm side fans and inserts without tape | V2.4 | 2024-01-08T16:38:25+00:00 | +| Takuya | [WANSVIEW USB Camera Mount](Takuya/USBCameraMount) | WANSVIEW 1080p Camera Mount for Voron 2.4 | V2.4 | 2024-01-08T16:38:25+00:00 | +| tallman5 | [Z Locks](tallman5/z-locks) | Helping hands curing v2.4 build, replaces long zip ties. | V2.4 | 2024-01-08T16:38:25+00:00 | +| tameike | [Din Rail 2020 Holder](tameike/DIN_Rail_2020_holder) | Attaching DIN Rails to 2020 | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Din Rail SKR 90 deg](tameike/DIN_Rail_SKR_1.3_90deg) | SKR V1.3 bracket turned 90 degrees | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Jetpack V0 base](tameike/Jetpack_V0) | Attach Jetpack to V0 frame | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [TacoRaven Mounting Frame](tameike/V0_TR_Mounting_Frame) | TR V0 mount | V0.2 | 2024-01-08T16:38:25+00:00 | +| tayto-chip | [V2.4 Skirt Switch Mod](tayto-chip/skirt_switch_mod) | Add a ON/OFF Switch to side or front skirts | V2.4 | 2024-01-08T16:38:25+00:00 | +| teookie | [AB dial indicator mount](teookie/AB_dial_indicator_mount) | Mount for attaching standard dial indicators to AB | V1.8, V2.4, VSW | 2024-01-08T16:38:25+00:00 | +| | [SKR Brace](teookie/skr_brace) | Rigidize and stabilize SKR 1.4 mounts | V2.4 | 2024-01-08T16:38:25+00:00 | +| th0mpy | [BEEFY Din Clips](th0mpy/beefy-din) | Two piece BEEFY Din Clips, holds stronger | V2.4 | 2024-01-08T16:38:25+00:00 | +| TheSquiffy | [V0 Belts holder](TheSquiffy/V0_Belts_holder) | V0 Belts Holder | V0.2 | 2024-01-08T16:38:25+00:00 | +| TiagoBarata | [Logitech C270 Mount](TiagoBarata/Logitech_C270_Mount) | Logitech C270 Top Center Mount | V2.4 | 2024-01-08T16:38:25+00:00 | +| Tircown | [DIN mount RS-15-5 PSU](Tircown/DIN_mount_RS-15-5) | A DIN mount for the RS-15-5 | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Display mount 5"](Tircown/Display_mount_5inch) | Tiltable mount for a 5" tactile display | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Raspberry in plug panel](Tircown/Raspberry_plug_panel) | Raspberry mount vertically in the plug panel, allow easy access to... | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [V0.1 Skirt buttons](Tircown/V01_skirt_buttons) | Buttons for V0.1 spec skirts | V0.2 | 2024-01-08T16:38:25+00:00 | +| togi | [Exhaust housing side fitting](togi/exhaust_housing_side_fitting) | Moves the exhaust housing bowden fitting 90 degrees to allow the... | V2.4 | 2024-01-08T16:38:25+00:00 | +| top_gun_de | [mount_for_umbilical](top_gun_de/mount_for_umbilical) | Umbilical guide that goes on the chain anchor | V2.4 | 2024-01-08T16:38:25+00:00 | +| Triano | [Ender 3 Pro or V2 to Switchwire Mod](Triano/Ender_3Pro_Switchwire) | Convesion of an Ender 3 Pro or V2 to a Switchwire | VSW | 2024-01-08T16:38:25+00:00 | +| Ultrawaffles | [Ender 3 to SW conversion](Ultrawaffles/Ender_3_to_SW) | A conversion mod for the ender 3 to switchwire. Designed to allow... | VSW | 2024-01-08T16:38:25+00:00 | +| VinnyCordeiro | [RGB LED grid for Stealthburner](VinnyCordeiro/RGB_LED_grid_for_SB) | A small RGB LED grid for Stealthburner's logo | V1.8, V2.4, VSW, VT | 2024-01-08T16:38:25+00:00 | +| warriorofwire | [Slenderfan for Afterburner](warriorofwire/slenderfan) | Lighter, quieter, smaller Afterburner | V2.4 | 2024-01-08T16:38:25+00:00 | +| watt-this | [In Situ Linear Carriage Block...](watt-this/in-situ_linear_rail_greasing) | A modification that allow lubrication of the linear reals while... | V2.4r2 | 2024-01-08T16:38:25+00:00 | +| Weaslus | [Electronics Bay and Enclosure...](Weaslus/Electronics-Bay-Seperator) | Better enclose chamber and keep heat from electronics | V0.2 | 2024-01-08T16:38:25+00:00 | +| whoppingpochard | [Extrusion Backers](whoppingpochard/extrusion_backers) | Laser-cut metal pieces to counteract bimetallic frame warping | V2.4 | 2024-01-08T16:38:25+00:00 | +| wile-e1 | [Deck Panel Support Clips](wile-e1/Deck_Panel_Support_Clips) | Clips to help support lower deck panels to prevent (or fix) warping: | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Stealthburner + CW1 + PCB Cover](wile-e1/Stealthburner_CW1_PCB_Cover) | Low-poly for Stealthburner + CW1 + PCB installations: | V1.8, V2.4, VSW | 2024-01-08T16:38:25+00:00 | +| wrez | [V0 Alternate IEC 320 C14 Power...](wrez/astrodyne-inlet) | Drop in replacement for alternate-source power inlet if spec inlet... | V0.2 | 2024-01-08T16:38:25+00:00 | +| xbst_ | [ADXL345 V0 Mount](xbst_/ADXL345_V0_Mount) | V0 Mount for a ADXL345 module | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Car Hood Style Bed Hinge](xbst_/Bed_Hinge) | A way of reaching electronics from the top by having a "car hood"... | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Duct Mount](xbst_/Duct_Mount) | 100mm/4" ducting mount for ventilation. Also supports umbilical... | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [DuetZero](xbst_/DuetZero) | Pi Zero mount over a Duet2 for space saving | V0.2, V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Easy Access Rear Panels](xbst_/Easy_Access_Rear_Panels_v0) | New rear panels designed to expose the extruder for easy filament... | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Flat V2.4 Skirts](xbst_/Flat_Skirts) | Flat V2.4 Skirts so a panel without cutouts can be used | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [Hat LED Mount](xbst_/Hat_LED_Mount) | Top Hat LED module mount | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [HOYMK SSR Mount](xbst_/HOYMK_SSR_Mount) | Mount for Chinese HOYMK SSR | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [PCB LED Holder](xbst_/LED_Holder) | Very simple mount for some (?) PCB LED Bars | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | +| | [DIN Mount Max31865](xbst_/Max31865_DIN_Mount) | A simple DIN rail mount for the Adafruit (or SAME SIZE clone)... | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | +| | [DIN Mount Omron Relay](xbst_/Omron_DIN_Mount) | A simple DIN rail mount for the BOM Relay | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | +| | [DIN Mount Pi 4x Relay Board](xbst_/Relay_DIN_Mount) | A simple DIN rail mount for the 4 channel relay board for Raspberry Pi | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 | +| | [V0 Electronics Cover](xbst_/V0_Electronic_Panel) | A printed cover for v0 electronics. Requires larger printer to print. | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Mobius 4 (M4) V0 Mod](xbst_/V0_M4_Mod) | Mod to mount a M4 extruder to a Voron 0 where pocketwatch extruder... | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [V0 PiCam Mount](xbst_/V0_Picam) | A Raspberry Pi Camera Mount For V0 | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [Screwed Front Door Hinge](xbst_/V0_Screw_Front_Hinge_Mod) | Mod to screw the front door panel (instead of VHB) | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [V0 Buttons & OLED Mount](xbst_/V0_Skirt_Buttons) | Mod to mount custom Gcode macro buttons & Waveshare 1.3" OLED display | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [V2.4 Fanless Middle Skirt](xbst_/V2.4_Fanless_Middle_Skirt) | A Fanless alternative middle side skirt | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [V2.4 Skirt Buttons](xbst_/V2.4_Skirt_Buttons) | Skirt mod for custom Gcode macro buttons | V2.4 | 2024-01-08T16:38:25+00:00 | +| | [ZipClip V0](xbst_/ZipClip_v0) | Very simple ziptie mount for v0 1515 extrusions | V0.2 | 2024-01-08T16:38:25+00:00 | +| xceled | [Single Panel Magnet Mount](xceled/Single_Panel_Magnet_Mount) | Mount your front panel using only magnets | V2.4 | 2024-01-08T16:38:25+00:00 | +| yenda | [SW More Robust XZ Belt Paths](yenda/vsw_more_robust_belt_paths) | Small mods to belt routing components to ensure a better/more... | VSW | 2024-01-08T16:38:25+00:00 | +| yeri | [V0 Magnetic Panels](yeri/V0_Magnetic_Panels) | Mount V0 panels with magnets, removes need for hinges and lets you... | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [V1 3Z](yeri/V1_3Z) | 3Z mod for V1 | V1.8 | 2024-01-08T16:38:25+00:00 | +| Zen3D | [V0 1515 T-nut](Zen3D/V0_1515_T-nut) | M3 square and hex nuts for Voron0 1515 frame | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [V0 Handle](Zen3D/V0_Handle) | Voron0 Handle for 3mm panels | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [V0 MidPanel HexPattern](Zen3D/V0_MidPanel_HexPattern) | Voron0 MidPanel with Hex pattern and Wire cover | V0.2 | 2024-01-08T16:38:25+00:00 | +| | [V0 Skirt set](Zen3D/V0_Skirt) | SSR, PowerSwitch, Adxl, Nameplate and color change printing | V0.2 | 2024-01-08T16:38:25+00:00 | +| zruncho | [V0 No-Drop Nuts](zruncho/V0_No_Drop_Nuts) | Voron0 nut inserts which auto-align (LDO frames only) | V0.2 | 2024-01-08T16:38:25+00:00 | +| ZZP8202 | [Pull-out electrical store](ZZP8202/Pull-out_electrical_store) | Voron 2.4 Pull-out electrical store（350mm only） | V2.4 | 2024-01-08T16:38:25+00:00 | diff --git a/printer_mods/Rhastlyn/60mmFanCover/.metadata.yml b/printer_mods/Rhastlyn/60mmFanCover/.metadata.yml index ab0685c5a..018e38bcd 100644 --- a/printer_mods/Rhastlyn/60mmFanCover/.metadata.yml +++ b/printer_mods/Rhastlyn/60mmFanCover/.metadata.yml @@ -6,4 +6,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/60mm_fan_grill_rev1.stl title: 60mm Fan Cover diff --git a/printer_mods/Rhastlyn/WansviewCameraMount/.metadata.yml b/printer_mods/Rhastlyn/WansviewCameraMount/.metadata.yml index fc71c6dc2..2c2924df8 100644 --- a/printer_mods/Rhastlyn/WansviewCameraMount/.metadata.yml +++ b/printer_mods/Rhastlyn/WansviewCameraMount/.metadata.yml @@ -10,4 +10,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/WansviewCameraMount.stl title: Wansview 1080p Camera Mount diff --git a/printer_mods/RockNLol/RockNRoll/.metadata.yml b/printer_mods/RockNLol/RockNRoll/.metadata.yml index c982b7ff7..3d2030336 100644 --- a/printer_mods/RockNLol/RockNRoll/.metadata.yml +++ b/printer_mods/RockNLol/RockNRoll/.metadata.yml @@ -17,4 +17,17 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/rocker_left.stl +- STLs/rocker_left_brace.stl +- STLs/rocker_right.stl +- STLs/rocker_right_brace.stl +- STLs/[a]_z_drive_baseplate_a_rnl_mod_r1.stl +- STLs/[a]_z_drive_baseplate_a_rnl_mod_r2.stl +- STLs/[a]_z_drive_baseplate_b_rnl_mod_r1.stl +- STLs/[a]_z_drive_baseplate_b_rnl_mod_r2.stl +- STLs/6mm_panels/rocker_left_6mm.stl +- STLs/6mm_panels/rocker_left_brace_6mm.stl +- STLs/6mm_panels/rocker_right_6mm.stl +- STLs/6mm_panels/rocker_right_brace_6mm.stl title: RockNRoll diff --git a/printer_mods/ScramblerUSA/SideSkirtPowerSwitch/.metadata.yml b/printer_mods/ScramblerUSA/SideSkirtPowerSwitch/.metadata.yml index 9c97e13ff..a1c54ee19 100644 --- a/printer_mods/ScramblerUSA/SideSkirtPowerSwitch/.metadata.yml +++ b/printer_mods/ScramblerUSA/SideSkirtPowerSwitch/.metadata.yml @@ -7,4 +7,8 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/side_skirt_switch_250.stl +- STL/side_skirt_switch_300.stl +- STL/side_skirt_switch_350.stl title: Side Skirt Power Switch diff --git a/printer_mods/See1807/Voron_V0_Exhaust_and_LED_Mod/.metadata.yml b/printer_mods/See1807/Voron_V0_Exhaust_and_LED_Mod/.metadata.yml index e32c00fe3..8c341533a 100644 --- a/printer_mods/See1807/Voron_V0_Exhaust_and_LED_Mod/.metadata.yml +++ b/printer_mods/See1807/Voron_V0_Exhaust_and_LED_Mod/.metadata.yml @@ -15,4 +15,13 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/Skirt_12mm_switch.stl +- STL/Exhaust/Exhaust_without_Holes.stl +- STL/Exhaust/Exhaust_with_Holes.stl +- STL/Exhaust/[a]Exhaust_Cover.stl +- STL/LED_Light/LED_Carrier.stl +- STL/LED_Light/LED_Carrier_mirror.stl +- STL/LED_Light/[a]_LED_Cover_2x.stl +- STL/LED_Light/[a]_LED_Mountigplatte_2x.stl title: TopHat Exhaust and LED Light diff --git a/printer_mods/Shiftingtech/Trident_dual_power_switch/.metadata.yml b/printer_mods/Shiftingtech/Trident_dual_power_switch/.metadata.yml index 84dcf3fd3..0090996e9 100644 --- a/printer_mods/Shiftingtech/Trident_dual_power_switch/.metadata.yml +++ b/printer_mods/Shiftingtech/Trident_dual_power_switch/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - VT +stl: +- STLs/power_inlet_filtered.stl title: Trident Dual Power Switch diff --git a/printer_mods/ShinyPants/Orange_Pi_3_LTS_DIN/.metadata.yml b/printer_mods/ShinyPants/Orange_Pi_3_LTS_DIN/.metadata.yml index b602b9879..db2766407 100644 --- a/printer_mods/ShinyPants/Orange_Pi_3_LTS_DIN/.metadata.yml +++ b/printer_mods/ShinyPants/Orange_Pi_3_LTS_DIN/.metadata.yml @@ -8,4 +8,6 @@ printer_compatibility: - V1.8 - V2.4 - VT +stl: +- STLs/OrangePi_Bracket.STL title: OrangePi 3 LTS DIN Rail bracket diff --git a/printer_mods/Shteeeeeve/V01-LED-Tophat/.metadata.yml b/printer_mods/Shteeeeeve/V01-LED-Tophat/.metadata.yml index 20b97627d..87352bf05 100644 --- a/printer_mods/Shteeeeeve/V01-LED-Tophat/.metadata.yml +++ b/printer_mods/Shteeeeeve/V01-LED-Tophat/.metadata.yml @@ -10,4 +10,8 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/LED-Tophat-Logo-Insert.stl +- STLs/LED-Tophat-Main-Body.stl +- STLs/LED-Tophat-Top-Cover.stl title: V0.1 LED Tophat diff --git a/printer_mods/Slidr/PanzerBalls2.4/.metadata.yml b/printer_mods/Slidr/PanzerBalls2.4/.metadata.yml index 3b2b7a102..73c4447ec 100644 --- a/printer_mods/Slidr/PanzerBalls2.4/.metadata.yml +++ b/printer_mods/Slidr/PanzerBalls2.4/.metadata.yml @@ -6,4 +6,8 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- 01-Normal/[a]_PanzerBall_x4.stl +- 02-Optional_z-Drive-Mod/[a]_PanzerBall_Tensioner_Type1_x2.stl +- 02-Optional_z-Drive-Mod/[a]_PanzerBall_Tensioner_Type2_x2.stl title: PanzerBalls 2.4 diff --git a/printer_mods/Slidr/PanzerChain2.4/.metadata.yml b/printer_mods/Slidr/PanzerChain2.4/.metadata.yml index 946a477ff..fc5f150e5 100644 --- a/printer_mods/Slidr/PanzerChain2.4/.metadata.yml +++ b/printer_mods/Slidr/PanzerChain2.4/.metadata.yml @@ -5,4 +5,22 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- stl/xyz_clip.stl +- stl/xy_anchor_bridge_x1.stl +- stl/xy_anchor_extrusion_x2.stl +- stl/xy_bridge_x1.stl +- stl/xy_link.stl +- stl/x_anchor_direct_drive_x1.stl +- stl/x_anchor_mount_bowden.stl +- stl/x_anchor_mount_direct_drive2_cover_x1.stl +- stl/x_anchor_mount_direct_drive2_no_cover_x1.stl +- stl/z_anchor_frame_vertical_solid_200_x1.stl +- stl/z_anchor_frame_vertical_solid_250_x1.stl +- stl/z_anchor_frame_vertical_solid_300_x1.stl +- stl/z_anchor_frame_vertical_solid_350_x1.stl +- stl/z_anchor_frame_vertical_solid_400_x1.stl +- stl/z_anchor_frame_x1.stl +- stl/z_anchor_gantry_x1.stl +- stl/z_link.stl title: PanzerChain 2.4 diff --git a/printer_mods/Spaghetti-Bolognese/LCD_case_mod/.metadata.yml b/printer_mods/Spaghetti-Bolognese/LCD_case_mod/.metadata.yml index 1824d48a8..ec6bfe908 100644 --- a/printer_mods/Spaghetti-Bolognese/LCD_case_mod/.metadata.yml +++ b/printer_mods/Spaghetti-Bolognese/LCD_case_mod/.metadata.yml @@ -8,4 +8,7 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- Mini12864_Case_Front.stl +- Mini12864_Case_Rear.stl title: LCD Case Mod diff --git a/printer_mods/Spaghetti-Bolognese/Z_drive_motor_mount/.metadata.yml b/printer_mods/Spaghetti-Bolognese/Z_drive_motor_mount/.metadata.yml index 84687c32b..623b7968f 100644 --- a/printer_mods/Spaghetti-Bolognese/Z_drive_motor_mount/.metadata.yml +++ b/printer_mods/Spaghetti-Bolognese/Z_drive_motor_mount/.metadata.yml @@ -8,4 +8,7 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- Z_Motor_Mount_A.stl +- Z_Motor_Mount_B.stl title: Simplified Z Drive Motor Mount diff --git a/printer_mods/StvPtrsn/320mm_Build/.metadata.yml b/printer_mods/StvPtrsn/320mm_Build/.metadata.yml index 1170c95c4..7f46388ed 100644 --- a/printer_mods/StvPtrsn/320mm_Build/.metadata.yml +++ b/printer_mods/StvPtrsn/320mm_Build/.metadata.yml @@ -10,4 +10,9 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/front_rear_skirt_a_320_x2.stl +- STL/front_rear_skirt_b_320_x2.stl +- STL/side_skirt_a_320_x2.stl +- STL/side_skirt_b_320_x2.stl title: Skirts for a 320mm Build diff --git a/printer_mods/StvPtrsn/Keystone_Jack_Filtered_Mains_Panel/.metadata.yml b/printer_mods/StvPtrsn/Keystone_Jack_Filtered_Mains_Panel/.metadata.yml index 4ca4ecb66..15a491fd8 100644 --- a/printer_mods/StvPtrsn/Keystone_Jack_Filtered_Mains_Panel/.metadata.yml +++ b/printer_mods/StvPtrsn/Keystone_Jack_Filtered_Mains_Panel/.metadata.yml @@ -9,4 +9,15 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/Plug_Panel_Filtered_mains_keystone.stl +- STL/rear_skirt_fmks_a_250.stl +- STL/rear_skirt_fmks_a_300.stl +- STL/rear_skirt_fmks_a_320.stl +- STL/rear_skirt_fmks_a_350.stl +- STL/rear_skirt_fmks_b_250.stl +- STL/rear_skirt_fmks_b_300.stl +- STL/rear_skirt_fmks_b_320.stl +- STL/rear_skirt_fmks_b_350.stl +- STL/[a]_keystone_blank_insert.stl title: Keystone Jack for Filtered Mains Panel diff --git a/printer_mods/StvPtrsn/Parts_Jigs_and_Mods/.metadata.yml b/printer_mods/StvPtrsn/Parts_Jigs_and_Mods/.metadata.yml index 5d855c6f1..2c34dc2b0 100644 --- a/printer_mods/StvPtrsn/Parts_Jigs_and_Mods/.metadata.yml +++ b/printer_mods/StvPtrsn/Parts_Jigs_and_Mods/.metadata.yml @@ -20,4 +20,18 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- Mods/2/z_belt_cover_b_camera.stl +- Mods/Legacy/fan_grille.stl +- Mods/Legacy/Legacy_Ender3_bed_mount_A_x2.stl +- Mods/Legacy/Legacy_Ender3_bed_mount_B_x2.stl +- Mods/Legacy/PS_stabilizerer.stl +- Mods/Legacy/[tpu]_OB_Corner_Foot.stl +- Mods/Switchwire/panel_spacer_tool.stl +- Mods/Switchwire/PTFE_tube_side_mount.stl +- Mods/Switchwire/spool_holder_base_side.stl +- Mods/Trident/z_stepper_left_camera.stl +- Parts/6-pin_microfit_skirt_insert.stl +- Parts/VHB_ZipTie_Anchor.stl +- Tools_Jigs/PTFE_Flush_Cutter.stl title: Parts_Jigs and Mods diff --git a/printer_mods/StvPtrsn/Side_Fan_Support_No_Tape/.metadata.yml b/printer_mods/StvPtrsn/Side_Fan_Support_No_Tape/.metadata.yml index 7334da552..b4db2a203 100644 --- a/printer_mods/StvPtrsn/Side_Fan_Support_No_Tape/.metadata.yml +++ b/printer_mods/StvPtrsn/Side_Fan_Support_No_Tape/.metadata.yml @@ -24,4 +24,14 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/fan_grill_retainer_x6.stl +- STL/fan_grill_washer_x8.stl +- STL/side_fan_support_x2.stl +- STL/[a]_60mm_fan_emptygrill.stl +- STL/[a]_60mm_fan_emptygrill_M3.stl +- STL/[a]_60mm_fan_grill_a_M3_x2.stl +- STL/[a]_60mm_fan_grill_a_x2.stl +- STL/[a]_60mm_fan_grill_b_M3_x2.stl +- STL/[a]_60mm_fan_grill_b_x2.stl title: Side Fan Support, No Tape diff --git a/printer_mods/Takuya/USBCameraMount/.metadata.yml b/printer_mods/Takuya/USBCameraMount/.metadata.yml index fb20fe075..f3a03e081 100644 --- a/printer_mods/Takuya/USBCameraMount/.metadata.yml +++ b/printer_mods/Takuya/USBCameraMount/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- VoronCamMount.stl title: WANSVIEW USB Camera Mount diff --git a/printer_mods/TheSquiffy/V0_Belts_holder/.metadata.yml b/printer_mods/TheSquiffy/V0_Belts_holder/.metadata.yml index 234bdd7f0..c8e8be65c 100644 --- a/printer_mods/TheSquiffy/V0_Belts_holder/.metadata.yml +++ b/printer_mods/TheSquiffy/V0_Belts_holder/.metadata.yml @@ -14,4 +14,8 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/belts_holder_bar_x2.stl +- STL/belts_holder_down_x1.stl +- STL/belts_holder_up_x1.stl title: V0 Belts holder diff --git a/printer_mods/TiagoBarata/Logitech_C270_Mount/.metadata.yml b/printer_mods/TiagoBarata/Logitech_C270_Mount/.metadata.yml index ff7bed344..5f08419a8 100644 --- a/printer_mods/TiagoBarata/Logitech_C270_Mount/.metadata.yml +++ b/printer_mods/TiagoBarata/Logitech_C270_Mount/.metadata.yml @@ -8,4 +8,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- C270_Top_Center_Mount.stl title: Logitech C270 Mount diff --git a/printer_mods/Tircown/DIN_mount_RS-15-5/.metadata.yml b/printer_mods/Tircown/DIN_mount_RS-15-5/.metadata.yml index f530fa142..eb0867520 100644 --- a/printer_mods/Tircown/DIN_mount_RS-15-5/.metadata.yml +++ b/printer_mods/Tircown/DIN_mount_RS-15-5/.metadata.yml @@ -4,4 +4,6 @@ images: [] mod_version: 1 printer_compatibility: - V2.4 +stl: +- DIN_Meanwell_RS-15-5_psu.stl title: DIN mount RS-15-5 PSU diff --git a/printer_mods/Tircown/Display_mount_5inch/.metadata.yml b/printer_mods/Tircown/Display_mount_5inch/.metadata.yml index 0efc1f93f..e77d5bb83 100644 --- a/printer_mods/Tircown/Display_mount_5inch/.metadata.yml +++ b/printer_mods/Tircown/Display_mount_5inch/.metadata.yml @@ -8,4 +8,18 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- display5inch_arm_a.stl +- display5inch_arm_b.stl +- display5inch_case.stl +- display5inch_case_moretolerance.stl +- display5inch_front_rear_skirt_a_250.stl +- display5inch_front_rear_skirt_a_300.stl +- display5inch_front_rear_skirt_a_350.stl +- display5inch_front_rear_skirt_b_250.stl +- display5inch_front_rear_skirt_b_300.stl +- display5inch_front_rear_skirt_b_350.stl +- display5inch_optional_microsd_holder.stl +- display5inch_optional_sd_holder.stl +- display5inch_slide_x2.stl title: Display mount 5" diff --git a/printer_mods/Tircown/Raspberry_plug_panel/.metadata.yml b/printer_mods/Tircown/Raspberry_plug_panel/.metadata.yml index 688fca91c..22355c14a 100644 --- a/printer_mods/Tircown/Raspberry_plug_panel/.metadata.yml +++ b/printer_mods/Tircown/Raspberry_plug_panel/.metadata.yml @@ -7,4 +7,9 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- plug_panel_raspberry_bracket.stl +- plug_panel_with_raspberry_DD11.stl +- plug_panel_with_raspberry_filtered_rocker.stl +- plug_panel_with_raspberry_unfiltered.stl title: Raspberry in plug panel diff --git a/printer_mods/Tircown/V01_skirt_buttons/.metadata.yml b/printer_mods/Tircown/V01_skirt_buttons/.metadata.yml index 3e2187748..17413c86b 100644 --- a/printer_mods/Tircown/V01_skirt_buttons/.metadata.yml +++ b/printer_mods/Tircown/V01_skirt_buttons/.metadata.yml @@ -8,4 +8,17 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/Button-arrow.stl +- STLs/Button-blank.stl +- STLs/Button-extrude.stl +- STLs/Button-heatbed.stl +- STLs/Button-hotend.stl +- STLs/Button-light.stl +- STLs/Button-park.stl +- STLs/Button-pauseresume.stl +- STLs/Button-power.stl +- STLs/Button-stop.stl +- STLs/Lock.stl +- STLs/Nut.stl title: V0.1 Skirt buttons diff --git a/printer_mods/Triano/Ender_3Pro_Switchwire/.metadata.yml b/printer_mods/Triano/Ender_3Pro_Switchwire/.metadata.yml index f99b6b764..d8ec638dc 100644 --- a/printer_mods/Triano/Ender_3Pro_Switchwire/.metadata.yml +++ b/printer_mods/Triano/Ender_3Pro_Switchwire/.metadata.yml @@ -12,4 +12,45 @@ images: mod_version: 1 printer_compatibility: - VSW +stl: +- STL/Deck/deck_front_left.stl +- STL/Deck/deck_front_right.stl +- STL/Deck/deck_rear_left.stl +- STL/Deck/deck_rear_right.stl +- STL/Deck/[a]_deck_y_chain_anchor.stl +- STL/Electronics/2020_ziptie_clip.stl +- STL/Electronics/[a]_ps_clamp.stl +- STL/Electronics/[a]_ps_hanger.stl +- STL/Electronics/[a]_rpi3_mount.stl +- STL/Electronics/[a]_rpi3_shelf.stl +- STL/Electronics/[a]_rs_25_hanger.stl +- STL/Electronics/[a]_skr_mini_e3_mount.stl +- STL/Grill/grill_front_left.stl +- STL/Grill/grill_front_right.stl +- STL/Grill/grill_rear_left.stl +- STL/Grill/grill_rear_right.stl +- STL/Grill/[a]_grill_endcap_x4.stl +- STL/Misc/4040_rail_tool.stl +- STL/XZ-Axis/keybak_mount_plate_a.stl +- STL/XZ-Axis/keybak_mount_plate_b.stl +- STL/XZ-Axis/xz_block_left_a.stl +- STL/XZ-Axis/xz_block_left_b.stl +- STL/XZ-Axis/xz_block_right_a.stl +- STL/XZ-Axis/xz_block_right_b.stl +- STL/XZ-Axis/x_motor_mount_a.stl +- STL/XZ-Axis/x_motor_mount_b.stl +- STL/XZ-Axis/z_bearing_block_left.stl +- STL/XZ-Axis/z_bearing_block_right_generic.stl +- STL/XZ-Axis/z_carriage_stop_x2.stl +- STL/XZ-Axis/z_motor_mount_a.stl +- STL/XZ-Axis/z_motor_mount_b.stl +- STL/XZ-Axis/[a]_xz_cable_cover.stl +- STL/Y-Axis/y_axis_bed_carriage.stl +- STL/Y-Axis/[a]_y_axis_anchor_x2.stl +- STL/Y-Axis/[a]_y_axis_frame_chain_anchor.stl +- STL/Y-Axis/[a]_y_axis_ls_mount.stl +- STL/Y-Axis/[a]_y_front_belt_mount.stl +- STL/Y-Axis/[a]_y_front_belt_slider.stl +- STL/Y-Axis/[a]_y_motor_mount_a.stl +- STL/Y-Axis/[a]_y_motor_mount_b.stl title: Ender 3 Pro or V2 to Switchwire Mod diff --git a/printer_mods/Ultrawaffles/Ender_3_to_SW/.metadata.yml b/printer_mods/Ultrawaffles/Ender_3_to_SW/.metadata.yml index 696b248b5..96ec30a5b 100644 --- a/printer_mods/Ultrawaffles/Ender_3_to_SW/.metadata.yml +++ b/printer_mods/Ultrawaffles/Ender_3_to_SW/.metadata.yml @@ -7,4 +7,43 @@ images: mod_version: 1 printer_compatibility: - VSW +stl: +- STLs/TPU_FEET_x4.stl +- STLs/Electronics/psu_2060_mount_x2_a.stl +- STLs/Electronics/psu_2060_mount_x2_b.stl +- STLs/Electronics/screen_(ender3_original)_wip/front_display.stl +- STLs/Electronics/screen_(ender3_original)_wip/peg.stl +- STLs/Electronics/screen_(ender3_original)_wip/screen_rear.stl +- STLs/Gantry/2040_Alignment_tool_x2.stl +- STLs/Gantry/XZ_axis/Keyback_idler.stl +- STLs/Gantry/XZ_axis/keyback_mount.stl +- STLs/Gantry/XZ_axis/keybak_gantry_anchor.stl +- STLs/Gantry/XZ_axis/upper_idler_support_a_left.stl +- STLs/Gantry/XZ_axis/upper_idler_support_a_right.stl +- STLs/Gantry/XZ_axis/xz_block_left_a.stl +- STLs/Gantry/XZ_axis/xz_block_left_b.stl +- STLs/Gantry/XZ_axis/xz_block_right_a.stl +- STLs/Gantry/XZ_axis/xz_block_right_b.stl +- STLs/Gantry/XZ_axis/x_motor_mount_a.stl +- STLs/Gantry/XZ_axis/x_motor_mount_b.stl +- STLs/Gantry/XZ_axis/Z_bearing_block_left.stl +- STLs/Gantry/XZ_axis/Z_bearing_block_right.stl +- STLs/Gantry/XZ_axis/z_carriage_stop_x3.stl +- STLs/Gantry/XZ_axis/z_motor_mount_a.stl +- STLs/Gantry/XZ_axis/z_motor_mount_b.stl +- STLs/Gantry/XZ_axis/[a]_upper_idler_support_b_left.stl +- STLs/Gantry/XZ_axis/[a]_upper_idler_support_b_right.stl +- STLs/Gantry/XZ_axis/[a]_z+chain_lower_mount.stl +- STLs/Gantry/XZ_axis/x_carriage/x_carriage_frame_left.stl +- STLs/Gantry/XZ_axis/x_carriage/x_carriage_frame_right.stl +- STLs/Gantry/Y_axis/bed_mount.stl +- STLs/Gantry/Y_axis/y_belt_anchor.stl +- STLs/Gantry/Y_axis/[a]_y_chain_frame_mount.stl +- STLs/Grill/grill_front_left.stl +- STLs/Grill/grill_front_middle.stl +- STLs/Grill/grill_front_right.stl +- STLs/Grill/grill_rear_left_filtered.stl +- STLs/Grill/grill_rear_middle.stl +- STLs/Grill/[a]_grill_endcap_x4.stl +- STLs/Panel_Mounting/panel_clip_x10.stl title: Ender 3 to SW conversion diff --git a/printer_mods/VinnyCordeiro/RGB_LED_grid_for_SB/.metadata.yml b/printer_mods/VinnyCordeiro/RGB_LED_grid_for_SB/.metadata.yml index 3683323a3..fdfc49fd8 100644 --- a/printer_mods/VinnyCordeiro/RGB_LED_grid_for_SB/.metadata.yml +++ b/printer_mods/VinnyCordeiro/RGB_LED_grid_for_SB/.metadata.yml @@ -9,4 +9,5 @@ printer_compatibility: - V2.4 - VSW - VT +stl: [] title: RGB LED grid for Stealthburner diff --git a/printer_mods/Weaslus/Electronics-Bay-Seperator/.metadata.yml b/printer_mods/Weaslus/Electronics-Bay-Seperator/.metadata.yml index fcd8b8b13..d36b5498c 100644 --- a/printer_mods/Weaslus/Electronics-Bay-Seperator/.metadata.yml +++ b/printer_mods/Weaslus/Electronics-Bay-Seperator/.metadata.yml @@ -5,4 +5,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Electronics_Bay_and_Chamber_Seperator.stl title: Electronics Bay and Enclosure Seperator diff --git a/printer_mods/ZZP8202/Pull-out_electrical_store/.metadata.yml b/printer_mods/ZZP8202/Pull-out_electrical_store/.metadata.yml index fe682558d..c3d646f9e 100644 --- a/printer_mods/ZZP8202/Pull-out_electrical_store/.metadata.yml +++ b/printer_mods/ZZP8202/Pull-out_electrical_store/.metadata.yml @@ -11,4 +11,11 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/Fan_decorative_panel_X2.STL +- STL/Front_L_350_X1.STL +- STL/Front_R_350_X1.STL +- STL/Mini12864_Case_Assembly_X1.STL +- STL/Side_L_350_X2.STL +- STL/Side_R_350_X2.STL title: Pull-out electrical store diff --git a/printer_mods/Zen3D/V0_1515_T-nut/.metadata.yml b/printer_mods/Zen3D/V0_1515_T-nut/.metadata.yml index d5a6693e4..1391753ee 100644 --- a/printer_mods/Zen3D/V0_1515_T-nut/.metadata.yml +++ b/printer_mods/Zen3D/V0_1515_T-nut/.metadata.yml @@ -7,4 +7,9 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- LDO/HexNut_1515.stl +- LDO/SquareNut_1515.stl +- MakerBeam/HexNut_1515.stl +- MakerBeam/SquareNut_1515.stl title: V0 1515 T-nut diff --git a/printer_mods/Zen3D/V0_Handle/.metadata.yml b/printer_mods/Zen3D/V0_Handle/.metadata.yml index af20ca42d..453685922 100644 --- a/printer_mods/Zen3D/V0_Handle/.metadata.yml +++ b/printer_mods/Zen3D/V0_Handle/.metadata.yml @@ -6,4 +6,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Voron0Handle.stl title: V0 Handle diff --git a/printer_mods/Zen3D/V0_MidPanel_HexPattern/.metadata.yml b/printer_mods/Zen3D/V0_MidPanel_HexPattern/.metadata.yml index 702c68a19..d3ff53a87 100644 --- a/printer_mods/Zen3D/V0_MidPanel_HexPattern/.metadata.yml +++ b/printer_mods/Zen3D/V0_MidPanel_HexPattern/.metadata.yml @@ -12,4 +12,8 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- V00_MidPanelCover.stl +- V00_MidPanelHex.stl +- V01_MidPanelHex.stl title: V0 MidPanel HexPattern diff --git a/printer_mods/Zen3D/V0_Skirt/.metadata.yml b/printer_mods/Zen3D/V0_Skirt/.metadata.yml index acb514eae..f62ec8d2e 100644 --- a/printer_mods/Zen3D/V0_Skirt/.metadata.yml +++ b/printer_mods/Zen3D/V0_Skirt/.metadata.yml @@ -12,4 +12,13 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- V0.0/Skirt.stl +- V0.0/Skirt_adxl.stl +- V0.0/Skirt_EmptyNameplate.stl +- V0.0/Skirt_mirror.stl +- V0.0/Skirt_PowerSwitch.stl +- V0.0/Skirt_ssr.stl +- V0.1/Skirt.stl +- V0.1/Skirt_mirror.stl title: V0 Skirt set diff --git a/printer_mods/aTinyShellScript/RS_PSU_DIN_Brackets/.metadata.yml b/printer_mods/aTinyShellScript/RS_PSU_DIN_Brackets/.metadata.yml index 4626543ae..b1ed15b7e 100644 --- a/printer_mods/aTinyShellScript/RS_PSU_DIN_Brackets/.metadata.yml +++ b/printer_mods/aTinyShellScript/RS_PSU_DIN_Brackets/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/Meanwell_RS_PSU_DIN_Brackets_v1.stl title: RS PSU DIN Bracket diff --git a/printer_mods/ademuri/Lights_Camera_Voron/.metadata.yml b/printer_mods/ademuri/Lights_Camera_Voron/.metadata.yml index b4c97bc02..187ea6196 100644 --- a/printer_mods/ademuri/Lights_Camera_Voron/.metadata.yml +++ b/printer_mods/ademuri/Lights_Camera_Voron/.metadata.yml @@ -7,4 +7,8 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- rail.stl +- rail_camera_mount.stl +- rail_zip_tie_mount.stl title: Lights, Camera, Voron diff --git a/printer_mods/aeresov/MeanWell_UHP_DIN_mount/.metadata.yml b/printer_mods/aeresov/MeanWell_UHP_DIN_mount/.metadata.yml index 720a617d0..656a4d88d 100644 --- a/printer_mods/aeresov/MeanWell_UHP_DIN_mount/.metadata.yml +++ b/printer_mods/aeresov/MeanWell_UHP_DIN_mount/.metadata.yml @@ -11,4 +11,8 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/UHP_200_series.stl +- STLs/UHP_350_series.stl +- STLs/UHP_500_series.stl title: MeanWell UHP-xxx DIN mount diff --git a/printer_mods/aeresov/Raspberry_Pi_DIN_mount/.metadata.yml b/printer_mods/aeresov/Raspberry_Pi_DIN_mount/.metadata.yml index 0e7e0df4e..1c33a6b11 100644 --- a/printer_mods/aeresov/Raspberry_Pi_DIN_mount/.metadata.yml +++ b/printer_mods/aeresov/Raspberry_Pi_DIN_mount/.metadata.yml @@ -10,4 +10,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/RPi_DIN_mount.stl title: Raspberry Pi DIN mount diff --git a/printer_mods/aeresov/SKR_DIN_mount/.metadata.yml b/printer_mods/aeresov/SKR_DIN_mount/.metadata.yml index 35004e108..ba17fa03e 100644 --- a/printer_mods/aeresov/SKR_DIN_mount/.metadata.yml +++ b/printer_mods/aeresov/SKR_DIN_mount/.metadata.yml @@ -10,4 +10,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/SKR_DIN_mount.stl title: SKR 1.3/1.4 DIN mount diff --git a/printer_mods/aeresov/TL_filament_sensor_bracket/.metadata.yml b/printer_mods/aeresov/TL_filament_sensor_bracket/.metadata.yml index 1410f4ea3..6dec44120 100644 --- a/printer_mods/aeresov/TL_filament_sensor_bracket/.metadata.yml +++ b/printer_mods/aeresov/TL_filament_sensor_bracket/.metadata.yml @@ -10,4 +10,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/TL_filament_sensor_bracket.stl title: TL filament sensor bracket diff --git a/printer_mods/aeresov/cable_tie_DIN_mount/.metadata.yml b/printer_mods/aeresov/cable_tie_DIN_mount/.metadata.yml index 17386f5ce..0dd32d02a 100644 --- a/printer_mods/aeresov/cable_tie_DIN_mount/.metadata.yml +++ b/printer_mods/aeresov/cable_tie_DIN_mount/.metadata.yml @@ -8,4 +8,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/cable_tie_DIN_mount.stl title: cable tie DIN mount diff --git a/printer_mods/al3ph/analog_timer_mount/.metadata.yml b/printer_mods/al3ph/analog_timer_mount/.metadata.yml index ec3a15a56..e3f413c74 100644 --- a/printer_mods/al3ph/analog_timer_mount/.metadata.yml +++ b/printer_mods/al3ph/analog_timer_mount/.metadata.yml @@ -4,4 +4,6 @@ images: [] mod_version: 1 printer_compatibility: - V0.2 +stl: +- analog_timer_mount.stl title: Analog Timer Mount diff --git a/printer_mods/al3ph/filament_runout/.metadata.yml b/printer_mods/al3ph/filament_runout/.metadata.yml index 8fc06e758..954239a9d 100644 --- a/printer_mods/al3ph/filament_runout/.metadata.yml +++ b/printer_mods/al3ph/filament_runout/.metadata.yml @@ -11,4 +11,8 @@ printer_compatibility: - V1.8 - V2.4 - VSW +stl: +- back.stl +- front.stl +- spinner.stl title: Filament Runout Sensor diff --git a/printer_mods/al3ph/led_mount/.metadata.yml b/printer_mods/al3ph/led_mount/.metadata.yml index 921825775..043ff6727 100644 --- a/printer_mods/al3ph/led_mount/.metadata.yml +++ b/printer_mods/al3ph/led_mount/.metadata.yml @@ -4,4 +4,6 @@ images: [] mod_version: 1 printer_compatibility: - V0.2 +stl: +- led_mount.stl title: LED Mount diff --git a/printer_mods/al3ph/pl05_mount/.metadata.yml b/printer_mods/al3ph/pl05_mount/.metadata.yml index d3734b21d..160046cae 100644 --- a/printer_mods/al3ph/pl05_mount/.metadata.yml +++ b/printer_mods/al3ph/pl05_mount/.metadata.yml @@ -7,4 +7,8 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- left_duct.stl +- pl05_holder.stl +- right_duct.stl title: PL05 Sensor Mount diff --git a/printer_mods/alanho/BTT_PITFT50_v2_Mount/.metadata.yml b/printer_mods/alanho/BTT_PITFT50_v2_Mount/.metadata.yml index 754cbccc0..4ebcd1cb1 100644 --- a/printer_mods/alanho/BTT_PITFT50_v2_Mount/.metadata.yml +++ b/printer_mods/alanho/BTT_PITFT50_v2_Mount/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/BTT-PITFT50-v2-Mount.stl title: BTT PITFT50 v2 Mount diff --git a/printer_mods/albert/IKEA_Dioder_Led_Mount/.metadata.yml b/printer_mods/albert/IKEA_Dioder_Led_Mount/.metadata.yml index a18a317a4..46800f93d 100644 --- a/printer_mods/albert/IKEA_Dioder_Led_Mount/.metadata.yml +++ b/printer_mods/albert/IKEA_Dioder_Led_Mount/.metadata.yml @@ -9,4 +9,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- Dioder_Led_Mount.stl title: IKEA Dioder Led Mount diff --git a/printer_mods/antoinecellerier/ds18b20-sensor-mount/.metadata.yml b/printer_mods/antoinecellerier/ds18b20-sensor-mount/.metadata.yml index 16980ff3e..9a684ae27 100644 --- a/printer_mods/antoinecellerier/ds18b20-sensor-mount/.metadata.yml +++ b/printer_mods/antoinecellerier/ds18b20-sensor-mount/.metadata.yml @@ -13,4 +13,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/DS18B20-sensor-mount.stl title: DS18B20 Sensor Mount diff --git a/printer_mods/ardichoke/v0-long-thumb-nut/.metadata.yml b/printer_mods/ardichoke/v0-long-thumb-nut/.metadata.yml index 54999b44c..97eaaf59c 100644 --- a/printer_mods/ardichoke/v0-long-thumb-nut/.metadata.yml +++ b/printer_mods/ardichoke/v0-long-thumb-nut/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/[a]_bed_thumb_nut_x3.stl title: V0 Long Thumb Nut diff --git a/printer_mods/arkeet/dti-mount/.metadata.yml b/printer_mods/arkeet/dti-mount/.metadata.yml index 3321b3e55..7414b982f 100644 --- a/printer_mods/arkeet/dti-mount/.metadata.yml +++ b/printer_mods/arkeet/dti-mount/.metadata.yml @@ -10,4 +10,6 @@ mod_version: 1 printer_compatibility: - V1.8 - V2.4 +stl: +- dti-mount.stl title: Dial test indicator mount diff --git a/printer_mods/arkeet/magnet-fan-cover/.metadata.yml b/printer_mods/arkeet/magnet-fan-cover/.metadata.yml index 0c1972f8f..352766e81 100644 --- a/printer_mods/arkeet/magnet-fan-cover/.metadata.yml +++ b/printer_mods/arkeet/magnet-fan-cover/.metadata.yml @@ -12,4 +12,6 @@ printer_compatibility: - V1.8 - V2.4 - VSW +stl: +- STL/hotend_fan_mount.stl title: Magnetic hotend fan cover diff --git a/printer_mods/arkeet/mgn12/.metadata.yml b/printer_mods/arkeet/mgn12/.metadata.yml index 5310fb72a..2a6579835 100644 --- a/printer_mods/arkeet/mgn12/.metadata.yml +++ b/printer_mods/arkeet/mgn12/.metadata.yml @@ -10,4 +10,13 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/probe_retainer_bracket_9mm.stl +- STLs/xy_joint_left_lower.stl +- STLs/xy_joint_left_upper.stl +- STLs/xy_joint_right_lower.stl +- STLs/xy_joint_right_upper.stl +- STLs/x_carriage_frame_left.stl +- STLs/x_carriage_frame_right.stl +- STLs/x_carriage_frame_right_endstop.stl title: MGN12 X-axis diff --git a/printer_mods/arkeet/v0-dc-inlet/.metadata.yml b/printer_mods/arkeet/v0-dc-inlet/.metadata.yml index 516cc7165..47e35aa0f 100644 --- a/printer_mods/arkeet/v0-dc-inlet/.metadata.yml +++ b/printer_mods/arkeet/v0-dc-inlet/.metadata.yml @@ -11,4 +11,9 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/inlet_bracket.stl +- STLs/skirt_rear_left_with_inlet.stl +- STLs/skirt_rear_right.stl +- STLs/skirt_side_with_inlet.stl title: V0 DC inlet diff --git a/printer_mods/baccula/revo_skirt_nozzle_holder/.metadata.yml b/printer_mods/baccula/revo_skirt_nozzle_holder/.metadata.yml index 3c0f70f3c..1969ac83e 100644 --- a/printer_mods/baccula/revo_skirt_nozzle_holder/.metadata.yml +++ b/printer_mods/baccula/revo_skirt_nozzle_holder/.metadata.yml @@ -11,4 +11,7 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/skirt_350.stl +- STL/[a]_nozzle_holder.stl title: Revo Nozzle Holder for v2.4 350 diff --git a/printer_mods/beaugalbraith/Nova_Printhead/.metadata.yml b/printer_mods/beaugalbraith/Nova_Printhead/.metadata.yml index e286c87d5..f3c6bd5e2 100644 --- a/printer_mods/beaugalbraith/Nova_Printhead/.metadata.yml +++ b/printer_mods/beaugalbraith/Nova_Printhead/.metadata.yml @@ -13,4 +13,8 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- printhead_front_nova.stl +- printhead_rear_nova.stl +- printhead_rear_v1.1.stl title: Nova Printhead diff --git a/printer_mods/bobbleheed/Filament_Runout/.metadata.yml b/printer_mods/bobbleheed/Filament_Runout/.metadata.yml index 4209eaaab..0daf5a0c6 100644 --- a/printer_mods/bobbleheed/Filament_Runout/.metadata.yml +++ b/printer_mods/bobbleheed/Filament_Runout/.metadata.yml @@ -10,4 +10,8 @@ printer_compatibility: - V1.8 - V2.4 - VT +stl: +- STL/Cover.stl +- STL/LH_Filament_Runout_Housing.stl +- STL/RH_Filament_Runout_Housing.stl title: Filament Runout Sensor diff --git a/printer_mods/bobbleheed/Magnetic_Panels/.metadata.yml b/printer_mods/bobbleheed/Magnetic_Panels/.metadata.yml index 0937fa12b..21b42bc0d 100644 --- a/printer_mods/bobbleheed/Magnetic_Panels/.metadata.yml +++ b/printer_mods/bobbleheed/Magnetic_Panels/.metadata.yml @@ -9,4 +9,9 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/Magnetic_Cap_6mm.stl +- STL/Magnetic_Mount_6mm.stl +- STL/Midspan_(Optional)/Mid_Cap_6mm.stl +- STL/Midspan_(Optional)/Mid_Mount_6mm.stl title: Magnetic Panels diff --git a/printer_mods/btp/Galileo_Switchwire_Chain_Mount/.metadata.yml b/printer_mods/btp/Galileo_Switchwire_Chain_Mount/.metadata.yml index 3c6cbb845..cbf649700 100644 --- a/printer_mods/btp/Galileo_Switchwire_Chain_Mount/.metadata.yml +++ b/printer_mods/btp/Galileo_Switchwire_Chain_Mount/.metadata.yml @@ -5,4 +5,6 @@ images: mod_version: 1 printer_compatibility: - VSW +stl: +- switchwire_chain.stl title: Galileo chain mount (befenybay) diff --git a/printer_mods/buzzdalf/connector_cover/.metadata.yml b/printer_mods/buzzdalf/connector_cover/.metadata.yml index 06241a098..397497b49 100644 --- a/printer_mods/buzzdalf/connector_cover/.metadata.yml +++ b/printer_mods/buzzdalf/connector_cover/.metadata.yml @@ -7,4 +7,6 @@ mod_version: 1 printer_compatibility: - V1.8 - V2.4 +stl: +- voron_1_8_connector_cover_LDO-42STH20.stl title: v1.8/2.4 Afterburner connector cover for 42STH20-1004AS diff --git a/printer_mods/buzzdalf/ender_switchwire_taller_z/.metadata.yml b/printer_mods/buzzdalf/ender_switchwire_taller_z/.metadata.yml index 0385156c0..24e5c6043 100644 --- a/printer_mods/buzzdalf/ender_switchwire_taller_z/.metadata.yml +++ b/printer_mods/buzzdalf/ender_switchwire_taller_z/.metadata.yml @@ -12,4 +12,12 @@ images: mod_version: 1 printer_compatibility: - VSW +stl: +- STL/Bowden_Guide_x2.stl +- STL/Left_Front_x1.stl +- STL/Left_Rear_x1.stl +- STL/Right_Front_x1.stl +- STL/Right_Rear_x1.stl +- STL/[a]_Upper-Block_Left_Top_x1.stl +- STL/[a]_Upper-Block_Right_Top_x1.stl title: Ender 3 Switchwire Taller Z Mod diff --git a/printer_mods/buzzdalf/ytension/.metadata.yml b/printer_mods/buzzdalf/ytension/.metadata.yml index 34e9bb313..4b43750ce 100644 --- a/printer_mods/buzzdalf/ytension/.metadata.yml +++ b/printer_mods/buzzdalf/ytension/.metadata.yml @@ -9,4 +9,9 @@ images: mod_version: 1 printer_compatibility: - VSW +stl: +- STL/HEATSET.stl +- STL/hexnut.stl +- STL/insert.stl +- STL/shell.stl title: Ender 3 Switchwire Y Tensioner Mod diff --git a/printer_mods/bythorsthunder/MGN9_Backers/.metadata.yml b/printer_mods/bythorsthunder/MGN9_Backers/.metadata.yml index dad349ec9..ff9d520e0 100644 --- a/printer_mods/bythorsthunder/MGN9_Backers/.metadata.yml +++ b/printer_mods/bythorsthunder/MGN9_Backers/.metadata.yml @@ -10,4 +10,16 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL_Files/front_idler_left_upper_mgn9_backer_2.4r2.stl +- STL_Files/front_idler_right_upper_mgn9_backer_2.4r2.stl +- STL_Files/[a]_xy_joint_cable_bridge_tall_2hole.stl +- STL_Files/[a]_xy_joint_cable_bridge_tall_3hole.stl +- STL_Files/[a]_z_belt_clip_upper_left_mgn9_backer_2.4r2.stl +- STL_Files/[a]_z_belt_clip_upper_right_mgn9_backer_2.4r2.stl +- STL_Files/2.4r1/left_idler_upper_MGN9_backer_old.stl +- STL_Files/2.4r1/right_idler_upper_MGN9_backer_old.stl +- STL_Files/2.4r1/[a]_left_upper_belt_clip_MGN9_backer_old.stl +- STL_Files/2.4r1/[a]_right_upper_belt_clip_MGN9_backer_old.stl +- STL_Files/2.4r1/[a]_xy_chain_bridge_modified_old.stl title: MGN9 Backers Idlers diff --git a/printer_mods/bythorsthunder/Stealthburner_Rapido_Uhf/.metadata.yml b/printer_mods/bythorsthunder/Stealthburner_Rapido_Uhf/.metadata.yml index 21705264e..6e405260a 100644 --- a/printer_mods/bythorsthunder/Stealthburner_Rapido_Uhf/.metadata.yml +++ b/printer_mods/bythorsthunder/Stealthburner_Rapido_Uhf/.metadata.yml @@ -10,4 +10,7 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STL_FILES/Stealth_Rapido_UHF_Toolhead_Front.stl +- STL_FILES/[a]_Stealth_Rapido_UHF_Front.stl title: Stealthburner Rapido UHF diff --git a/printer_mods/chirpy/NozzleWiper/.metadata.yml b/printer_mods/chirpy/NozzleWiper/.metadata.yml index ad0e4bd66..96c7c4887 100644 --- a/printer_mods/chirpy/NozzleWiper/.metadata.yml +++ b/printer_mods/chirpy/NozzleWiper/.metadata.yml @@ -19,4 +19,13 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/Allinone.stl +- STLs/Brush_Carrier.stl +- STLs/Carrier_Joint.stl +- STLs/Parallel_Arm.stl +- STLs/Purge_Bucket.stl +- STLs/Servo_Arm.stl +- STLs/Servo_Joint.stl +- STLs/Servo_Mount.stl title: V0.1 Nozzle Wiper diff --git a/printer_mods/chirpy/RunoutUnklicky/.metadata.yml b/printer_mods/chirpy/RunoutUnklicky/.metadata.yml index 6ab09ee43..4aa7a6b8d 100644 --- a/printer_mods/chirpy/RunoutUnklicky/.metadata.yml +++ b/printer_mods/chirpy/RunoutUnklicky/.metadata.yml @@ -20,4 +20,14 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STLs/Base.stl +- STLs/Base_Collet.stl +- STLs/Base_PC4-M6.stl +- STLs/Pin.stl +- STLs/Roller.stl +- STLs/Top.stl +- STLs/Top_1515.stl +- STLs/Top_1515_NoNut.stl +- STLs/Top_2020.stl title: Runout UnKlicky Sensor diff --git a/printer_mods/chirpy/TipTophat/.metadata.yml b/printer_mods/chirpy/TipTophat/.metadata.yml index eecfc8790..f37d805aa 100644 --- a/printer_mods/chirpy/TipTophat/.metadata.yml +++ b/printer_mods/chirpy/TipTophat/.metadata.yml @@ -24,4 +24,22 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/Body_Q1.stl +- STLs/Body_Q2.stl +- STLs/Body_Q3.stl +- STLs/Body_Q4.stl +- STLs/Body_Top_Center_x2.stl +- STLs/Door_Frame.stl +- STLs/Door_Handle.stl +- STLs/Door_Hinge.stl +- STLs/Hinge_Left.stl +- STLs/Hinge_Right.stl +- STLs/Mid_Door.stl +- STLs/Mid_Left_x2.stl +- STLs/Mid_Right_x2.stl +- STLs/Peg_1_x2.stl +- STLs/Peg_2_x2.stl +- STLs/Top_Mid_x5.stl +- STLs/Unibody.stl title: V0.1 Raised Tophat diff --git a/printer_mods/chri.kai.in/20x20mm_Profile_Covers/.metadata.yml b/printer_mods/chri.kai.in/20x20mm_Profile_Covers/.metadata.yml index 5fcea2c72..96e1b7868 100644 --- a/printer_mods/chri.kai.in/20x20mm_Profile_Covers/.metadata.yml +++ b/printer_mods/chri.kai.in/20x20mm_Profile_Covers/.metadata.yml @@ -22,4 +22,7 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STL/2020_Profile_Cover.stl +- STL/2020_Stealth_Profile_Cover.stl title: 20x20mm Profile Covers diff --git a/printer_mods/chri.kai.in/Angry_CAM_USB/.metadata.yml b/printer_mods/chri.kai.in/Angry_CAM_USB/.metadata.yml index f0930ff89..1ea8df4cb 100644 --- a/printer_mods/chri.kai.in/Angry_CAM_USB/.metadata.yml +++ b/printer_mods/chri.kai.in/Angry_CAM_USB/.metadata.yml @@ -62,4 +62,12 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/Angry_CAM_Bottom_Mount.stl +- STL/Angry_CAM_Front_Mount.stl +- STL/Angry_CAM_Top_Mount.stl +- STL/Front_Cover.stl +- STL/Front_Cover_120+.stl +- STL/Rear_Cover.stl +- STL/Rear_Cover_120+.stl title: Angry CAM USB diff --git a/printer_mods/chri.kai.in/Exhaust_Adapter_100mm/.metadata.yml b/printer_mods/chri.kai.in/Exhaust_Adapter_100mm/.metadata.yml index 348a87734..6c227a3ab 100644 --- a/printer_mods/chri.kai.in/Exhaust_Adapter_100mm/.metadata.yml +++ b/printer_mods/chri.kai.in/Exhaust_Adapter_100mm/.metadata.yml @@ -10,4 +10,6 @@ printer_compatibility: - V1.8 - V2.4 - VT +stl: +- STL/VORON2_v2.4_Exhaust_Adapter_100mm_RC3.stl title: Exhaust Adapter 100mm diff --git a/printer_mods/chrisrgonzales/270_degree_hinge/.metadata.yml b/printer_mods/chrisrgonzales/270_degree_hinge/.metadata.yml index 0845b5b62..1b427c988 100644 --- a/printer_mods/chrisrgonzales/270_degree_hinge/.metadata.yml +++ b/printer_mods/chrisrgonzales/270_degree_hinge/.metadata.yml @@ -12,4 +12,59 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/backplate_x4.stl +- STLs/handle_a_x2.stl +- STLs/handle_b_x2.stl +- STLs/tester_4mm.stl +- STLs/tester_5mm.stl +- STLs/tester_6mm.stl +- STLs/3mm_drilled/3mm_hinge_a_without_logo_x2.stl +- STLs/3mm_drilled/3mm_hinge_a_with_logo_x2.stl +- STLs/3mm_drilled/3mm_hinge_b_without_logo_x2.stl +- STLs/3mm_drilled/3mm_hinge_b_with_logo_x2.stl +- STLs/3mm_drilled/3mm_latch_x2.stl +- STLs/3mm_drilled/3mm_side_mount_x4.stl +- STLs/3mm_tape/3mm_hinge_a_without_logo_x2.stl +- STLs/3mm_tape/3mm_hinge_a_with_logo_x2.stl +- STLs/3mm_tape/3mm_hinge_b_without_logo_x2.stl +- STLs/3mm_tape/3mm_hinge_b_with_logo_x2.stl +- STLs/3mm_tape/3mm_latch_x2.stl +- STLs/3mm_tape/3mm_side_mount_x4.stl +- STLs/4mm_drilled/4mm_hinge_a_without_logo_x2.stl +- STLs/4mm_drilled/4mm_hinge_a_with_logo_x2.stl +- STLs/4mm_drilled/4mm_hinge_b_without_logo_x2.stl +- STLs/4mm_drilled/4mm_hinge_b_with_logo_x2.stl +- STLs/4mm_drilled/4mm_latch_x2.stl +- STLs/4mm_drilled/4mm_side_mount_x4.stl +- STLs/4mm_tape/4mm_hinge_a_without_logo_x2.stl +- STLs/4mm_tape/4mm_hinge_a_with_logo_x2.stl +- STLs/4mm_tape/4mm_hinge_b_without_logo_x2.stl +- STLs/4mm_tape/4mm_hinge_b_with_logo_x2.stl +- STLs/4mm_tape/4mm_latch_x2.stl +- STLs/4mm_tape/4mm_side_mount_x4.stl +- STLs/5mm_drilled/5mm_hinge_a_without_logo_x2.stl +- STLs/5mm_drilled/5mm_hinge_a_with_logo_x2.stl +- STLs/5mm_drilled/5mm_hinge_b_without_logo_x2.stl +- STLs/5mm_drilled/5mm_hinge_b_with_logo_x2.stl +- STLs/5mm_drilled/5mm_latch_x2.stl +- STLs/5mm_drilled/5mm_side_mount_x4.stl +- STLs/5mm_tape/5mm_hinge_a_without_logo_x2.stl +- STLs/5mm_tape/5mm_hinge_a_with_logo_x2.stl +- STLs/5mm_tape/5mm_hinge_b_without_logo_x2.stl +- STLs/5mm_tape/5mm_hinge_b_with_logo_x2.stl +- STLs/5mm_tape/5mm_latch_x2.stl +- STLs/5mm_tape/5mm_side_mount_x4.stl +- STLs/6mm_drilled/6mm_hinge_a_without_logo_x2.stl +- STLs/6mm_drilled/6mm_hinge_a_with_logo_x2.stl +- STLs/6mm_drilled/6mm_hinge_b_without_logo_x2.stl +- STLs/6mm_drilled/6mm_hinge_b_with_logo_x2.stl +- STLs/6mm_drilled/6mm_latch_x2.stl +- STLs/6mm_drilled/6mm_side_mount_x4.stl +- STLs/6mm_tape/6mm_hinge_a_without_logo_x2.stl +- STLs/6mm_tape/6mm_hinge_a_with_logo_x2.stl +- STLs/6mm_tape/6mm_hinge_b_without_logo_x2.stl +- STLs/6mm_tape/6mm_hinge_b_with_logo_x2.stl +- STLs/6mm_tape/6mm_latch_x2.stl +- STLs/6mm_tape/6mm_side_mount_x4.stl title: "270\xB0 Front Panel Hinge" diff --git a/printer_mods/christophmueller/Phaetus_Dragonfly_BMO_Afterburner/.metadata.yml b/printer_mods/christophmueller/Phaetus_Dragonfly_BMO_Afterburner/.metadata.yml index e4c8368e7..395002e95 100644 --- a/printer_mods/christophmueller/Phaetus_Dragonfly_BMO_Afterburner/.metadata.yml +++ b/printer_mods/christophmueller/Phaetus_Dragonfly_BMO_Afterburner/.metadata.yml @@ -10,4 +10,9 @@ printer_compatibility: - V1.8 - V2.4 - VSW +stl: +- Phaetus_Dragonfly_BMO_Back.stl +- Phaetus_Dragonfly_BMO_Front.stl +- Zodiac_Dragonfly_BMO_Back.stl +- Zodiac_Dragonfly_BMO_Front.stl title: Phaetus and Zodiac Dragonfly BMO Afterburner toolheads diff --git a/printer_mods/claytono/2.4-extrusion-jig/.metadata.yml b/printer_mods/claytono/2.4-extrusion-jig/.metadata.yml index 9cbf3115c..e742034d2 100644 --- a/printer_mods/claytono/2.4-extrusion-jig/.metadata.yml +++ b/printer_mods/claytono/2.4-extrusion-jig/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- jig.stl title: Voron 2.4 Extrusion Jig diff --git a/printer_mods/claytono/fysetc-s6-v2-mount/.metadata.yml b/printer_mods/claytono/fysetc-s6-v2-mount/.metadata.yml index 45c6973af..b87069b41 100644 --- a/printer_mods/claytono/fysetc-s6-v2-mount/.metadata.yml +++ b/printer_mods/claytono/fysetc-s6-v2-mount/.metadata.yml @@ -7,4 +7,6 @@ mod_version: 1 printer_compatibility: - V1.8 - V2.4 +stl: +- Fysetc_S6_V2_Mount.stl title: Fysetc S6 V2 Mount diff --git a/printer_mods/claytono/v0-zip-tie-skirts/.metadata.yml b/printer_mods/claytono/v0-zip-tie-skirts/.metadata.yml index 7668f1c22..061cc1575 100644 --- a/printer_mods/claytono/v0-zip-tie-skirts/.metadata.yml +++ b/printer_mods/claytono/v0-zip-tie-skirts/.metadata.yml @@ -8,4 +8,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- V0_Left_Skirt-Zip_Tie.stl +- V0_Right_Skirt-Zip_Tie.stl title: V0 Zip Tie Skirts diff --git a/printer_mods/clee/Monster8_heatsert_mount/.metadata.yml b/printer_mods/clee/Monster8_heatsert_mount/.metadata.yml index 2f6d9cfcd..d64ef9282 100644 --- a/printer_mods/clee/Monster8_heatsert_mount/.metadata.yml +++ b/printer_mods/clee/Monster8_heatsert_mount/.metadata.yml @@ -8,4 +8,6 @@ mod_version: 1 printer_compatibility: - V2.4 - VT +stl: +- Monster8_DIN_clip_x2.stl title: Monster8 DIN Rail Mounts diff --git a/printer_mods/cmrny/v01_motor_panel_no_rub/.metadata.yml b/printer_mods/cmrny/v01_motor_panel_no_rub/.metadata.yml index a56e42a4f..7f33150c3 100644 --- a/printer_mods/cmrny/v01_motor_panel_no_rub/.metadata.yml +++ b/printer_mods/cmrny/v01_motor_panel_no_rub/.metadata.yml @@ -8,4 +8,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- motor_panel_no_rub.stl title: V0.1 Motor Panel Modification diff --git a/printer_mods/conqueror433/Voron_Parts_Logo/.metadata.yml b/printer_mods/conqueror433/Voron_Parts_Logo/.metadata.yml index 4a4f8d3e2..73b3d8efb 100644 --- a/printer_mods/conqueror433/Voron_Parts_Logo/.metadata.yml +++ b/printer_mods/conqueror433/Voron_Parts_Logo/.metadata.yml @@ -14,4 +14,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- Voron_Parts_Logo.stl title: Voron Parts Logo diff --git a/printer_mods/conqueror433/Voron_V0.1_Parts_Logo/.metadata.yml b/printer_mods/conqueror433/Voron_V0.1_Parts_Logo/.metadata.yml index 16acacb69..9756e4b87 100644 --- a/printer_mods/conqueror433/Voron_V0.1_Parts_Logo/.metadata.yml +++ b/printer_mods/conqueror433/Voron_V0.1_Parts_Logo/.metadata.yml @@ -10,4 +10,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Voron_V0_Parts_Logo.stl title: Voron V0.1 Parts Logo diff --git a/printer_mods/consibonsi/Y-Mod_SW_9mm/.metadata.yml b/printer_mods/consibonsi/Y-Mod_SW_9mm/.metadata.yml index 9569f6def..6f6790677 100644 --- a/printer_mods/consibonsi/Y-Mod_SW_9mm/.metadata.yml +++ b/printer_mods/consibonsi/Y-Mod_SW_9mm/.metadata.yml @@ -7,4 +7,16 @@ images: mod_version: 1 printer_compatibility: - VSW +stl: +- Belt_Anchor.stl +- Belt_Clamp.stl +- Deck_Back_Left_Y.stl +- Deck_Back_Right_Y.stl +- Deck_Front_Left_Y.stl +- Deck_Front_Right_Y.stl +- Motor_Bottom_Mount.stl +- Motor_Spacer.stl +- Motor_Top_Mount.stl +- Y_Idler_Bottom.stl +- Y_Idler_Top.stl title: Y-Mod SW 9mm diff --git a/printer_mods/csch0/SW_FanMount_No_Tape/.metadata.yml b/printer_mods/csch0/SW_FanMount_No_Tape/.metadata.yml index 1e49b02e8..c66da1ca3 100644 --- a/printer_mods/csch0/SW_FanMount_No_Tape/.metadata.yml +++ b/printer_mods/csch0/SW_FanMount_No_Tape/.metadata.yml @@ -6,4 +6,7 @@ images: mod_version: 1 printer_compatibility: - VSW +stl: +- STLs/mount.stl +- STLs/mount_mirror.stl title: SW Fan Mount No Tape diff --git a/printer_mods/d3nny/mains_plug_panel_for_RND_165-00057/.metadata.yml b/printer_mods/d3nny/mains_plug_panel_for_RND_165-00057/.metadata.yml index 53330c255..2a88583eb 100644 --- a/printer_mods/d3nny/mains_plug_panel_for_RND_165-00057/.metadata.yml +++ b/printer_mods/d3nny/mains_plug_panel_for_RND_165-00057/.metadata.yml @@ -4,4 +4,6 @@ images: [] mod_version: 1 printer_compatibility: - V2.4 +stl: +- mains_plug_panel_filtered_for_RND_165-00057_V24.stl title: Filtered Power Plug with RND_165-00057 diff --git a/printer_mods/dankeeling/CreativeLiveCameraMount/.metadata.yml b/printer_mods/dankeeling/CreativeLiveCameraMount/.metadata.yml index 95d540b55..662cf5188 100644 --- a/printer_mods/dankeeling/CreativeLiveCameraMount/.metadata.yml +++ b/printer_mods/dankeeling/CreativeLiveCameraMount/.metadata.yml @@ -1,31 +1,18 @@ ---- -# The title of your mod. Choose a short and descriptive name -title: Creative Live! Camera Mount -# A short description of your mod. Try to describe your mod with 1-2 short sentences -description: A mod to provide a mount for the Creative Live! Camera that mounts on 20mm extrusion. -# Mod version: Set this to 1 when you are submitting a new mod. When you make changes to your mod, you may increment this number -mod_version: 1 -# You may add your discord username here so people can contact you about your mod -discord_username: Klest -# The CAD files for your mod. Please provide them as a list. -# Note that each mod must include at least one CAD file. cad: - CAD/Creative_Live_Camera_Mount.step - -# The image files provided with your mod. These may be instructions you use in your README.md file, or other additional pictures. -# **Note that the first image specified here will be used as cover image on mods.vorondesign.com** -# All paths are relative to this .metadata.yml file. +description: A mod to provide a mount for the Creative Live! Camera that mounts on + 20mm extrusion. +discord_username: Klest images: - Images/20231224_211017.jpg - Images/20231224_211026.jpg - Images/20231224_211032.jpg - Images/20231224_211032_2.jpg - Images/PartImage.jpg - -# Printer compatibility. Please specify all compatible printers as a list. The following values are accepted: -# "V0", "V0.1", "V0.2", "V0.2r1", "V1", "V1.6", "V1.8", "V1.8r1", "V2", "V2.1", "V2.2", "V2.4", "V2.4r1", "V2.4r2", "VSW", "VT", "VTr1", "VL" -# Please only specify printers that you have either tested your mod on yourself, or that someone else has tested for you. If you are unsure whether your -# mod is compatible with a certain printer, don't list it here! +mod_version: 1 printer_compatibility: - VT - V2.4r2 +stl: +- STL/CreativeLiveCam.stl +title: Creative Live! Camera Mount diff --git a/printer_mods/davidauvergne/Center_cable_management_duct/.metadata.yml b/printer_mods/davidauvergne/Center_cable_management_duct/.metadata.yml index 53e809ac3..13a461fee 100644 --- a/printer_mods/davidauvergne/Center_cable_management_duct/.metadata.yml +++ b/printer_mods/davidauvergne/Center_cable_management_duct/.metadata.yml @@ -15,4 +15,8 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/CableDuct_Body_hole_50X208.stl +- STL/CableDuct_Body_no_hole_50X208.stl +- STL/CableDuct_Cover-50X208.stl title: Center_cable_management_duct diff --git a/printer_mods/dePrintinator/HEPA_Filter_Exhaust/.metadata.yml b/printer_mods/dePrintinator/HEPA_Filter_Exhaust/.metadata.yml index 9a9941a6c..c43291423 100644 --- a/printer_mods/dePrintinator/HEPA_Filter_Exhaust/.metadata.yml +++ b/printer_mods/dePrintinator/HEPA_Filter_Exhaust/.metadata.yml @@ -11,4 +11,8 @@ printer_compatibility: - V1.8 - V2.4 - VT +stl: +- STLs/exhaust-chamber-mount.stl +- STLs/exhaust-hepa-filter-housing.stl +- STLs/exhaust-lid.stl title: HEPA Exhaust diff --git a/printer_mods/deepfriedheroin/v0_bed_wagos/.metadata.yml b/printer_mods/deepfriedheroin/v0_bed_wagos/.metadata.yml index 8105abc11..af635a66f 100644 --- a/printer_mods/deepfriedheroin/v0_bed_wagos/.metadata.yml +++ b/printer_mods/deepfriedheroin/v0_bed_wagos/.metadata.yml @@ -9,4 +9,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- stl/v0_bed_wago_221-412x2.stl +- stl/v0_bed_wago_221-412x4.stl title: v0 Wago Bed Mounts diff --git a/printer_mods/deepfriedheroin/v0_power_wagos/.metadata.yml b/printer_mods/deepfriedheroin/v0_power_wagos/.metadata.yml index 43b1343d6..166e1ab2d 100644 --- a/printer_mods/deepfriedheroin/v0_power_wagos/.metadata.yml +++ b/printer_mods/deepfriedheroin/v0_power_wagos/.metadata.yml @@ -9,4 +9,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- stl/v0_3x3_wago_v2.stl title: v0 Power Wagos diff --git a/printer_mods/deepfriedheroin/v2_bed_wagos/.metadata.yml b/printer_mods/deepfriedheroin/v2_bed_wagos/.metadata.yml index 343ffd9fc..3ddb9089f 100644 --- a/printer_mods/deepfriedheroin/v2_bed_wagos/.metadata.yml +++ b/printer_mods/deepfriedheroin/v2_bed_wagos/.metadata.yml @@ -9,4 +9,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- stl/v2_bed_wago.stl title: V2 Bed Wagos diff --git a/printer_mods/doubletrouble/V0_Skirt_Mod/.metadata.yml b/printer_mods/doubletrouble/V0_Skirt_Mod/.metadata.yml index bc27f76e5..f4d3d70dc 100644 --- a/printer_mods/doubletrouble/V0_Skirt_Mod/.metadata.yml +++ b/printer_mods/doubletrouble/V0_Skirt_Mod/.metadata.yml @@ -7,4 +7,14 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- TallFeet_x4.stl +- w_Skirt_C14.stl +- w_Skirt_Front.stl +- w_Skirt_LCD_back.stl +- w_Skirt_Side_x2.stl +- '[a]_w_Skirt_C14.stl' +- '[a]_w_Skirt_Front_left.stl' +- '[a]_w_Skirt_Front_right.stl' +- '[a]_w_Skirt_Side_x2.stl' title: V0 Skirt Mod diff --git a/printer_mods/eamars/stealthburner_crazy_dragon_toolhead/.metadata.yml b/printer_mods/eamars/stealthburner_crazy_dragon_toolhead/.metadata.yml index ba316c991..a4b472034 100644 --- a/printer_mods/eamars/stealthburner_crazy_dragon_toolhead/.metadata.yml +++ b/printer_mods/eamars/stealthburner_crazy_dragon_toolhead/.metadata.yml @@ -13,4 +13,7 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STL/SBCrazyDragon_TH_Front.stl +- STL/SBCrazyDragon_TH_Rear_CW2.stl title: Stealthburner (RC1) Dragon Volcano Hotend Toolhead Mount diff --git a/printer_mods/eddie/LED_Bar_Clip/.metadata.yml b/printer_mods/eddie/LED_Bar_Clip/.metadata.yml index d7a0807c8..dfc5e40a7 100644 --- a/printer_mods/eddie/LED_Bar_Clip/.metadata.yml +++ b/printer_mods/eddie/LED_Bar_Clip/.metadata.yml @@ -8,4 +8,6 @@ printer_compatibility: - V1.8 - V2.4 - VT +stl: +- LED_Bar_Clip_Misumi_version2.stl title: LED Bar Clip diff --git a/printer_mods/eddie/V1.8_12mm_Z_Mod/.metadata.yml b/printer_mods/eddie/V1.8_12mm_Z_Mod/.metadata.yml index c0f645d1a..c9c381d8a 100644 --- a/printer_mods/eddie/V1.8_12mm_Z_Mod/.metadata.yml +++ b/printer_mods/eddie/V1.8_12mm_Z_Mod/.metadata.yml @@ -9,4 +9,9 @@ images: mod_version: 1 printer_compatibility: - V1.8 +stl: +- STLs/z_bearing_block_a_12mm_x2.stl +- STLs/z_bearing_block_b_12mm_x2.stl +- STLs/[a]_z_shaft_retainer_12mm_lower_x4.stl +- STLs/[a]_z_shaft_retainer_12mm_upper_x4.stl title: V1.8 12mm Z Mod diff --git a/printer_mods/edwardyeeks/Tridentified_V2.4_Power_Inlet/.metadata.yml b/printer_mods/edwardyeeks/Tridentified_V2.4_Power_Inlet/.metadata.yml index a6cc75d59..8b7290691 100644 --- a/printer_mods/edwardyeeks/Tridentified_V2.4_Power_Inlet/.metadata.yml +++ b/printer_mods/edwardyeeks/Tridentified_V2.4_Power_Inlet/.metadata.yml @@ -7,4 +7,17 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- 250/PlugSkirt_250_adamstech.stl +- 250/PlugSkirt_250_Filtered.stl +- 250/PlugSkirt_250_single.stl +- 250/RightSkirt_250.stl +- 300/FillSkirt.stl +- 300/PlugSkirt_300_adamstech.stl +- 300/PlugSkirt_300_Filtered.stl +- 300/PlugSkirt_300_single.stl +- 350/FillSkirt.stl +- 350/PlugSkirt_350_adamstech.stl +- 350/PlugSkirt_350_Filtered.stl +- 350/PlugSkirt_350_single.stl title: Tridentified V2.4 Power Inlet diff --git a/printer_mods/elcrni/Trident_Internal_Spool_Holder/.metadata.yml b/printer_mods/elcrni/Trident_Internal_Spool_Holder/.metadata.yml index 2690c71bb..cdbddeb30 100644 --- a/printer_mods/elcrni/Trident_Internal_Spool_Holder/.metadata.yml +++ b/printer_mods/elcrni/Trident_Internal_Spool_Holder/.metadata.yml @@ -13,4 +13,14 @@ images: mod_version: 1 printer_compatibility: - VT +stl: +- STL/PTFE_guide_top.stl +- STL/Trident_Internal_Spool___back_foot_.stl +- STL/Trident_Internal_Spool___front_foot_.stl +- STL/Trident_Internal_Spool___middle_Section_.stl +- STL/Trident_Internal_Spool___PTFE_guide_x2_.stl +- STL/Trident_Internal_Spool___roller_back_x4_.stl +- STL/Trident_Internal_Spool___roller_front_x4_.stl +- STL/Trident_Internal_Spool___spacer_back_x2_.stl +- STL/Trident_Internal_Spool___spacer_front_x2_.stl title: Trident Internal Spool Holder diff --git a/printer_mods/elcrni/V2.4-Trident-Spool-Holders/.metadata.yml b/printer_mods/elcrni/V2.4-Trident-Spool-Holders/.metadata.yml index 485ffc003..0cf8f4063 100644 --- a/printer_mods/elcrni/V2.4-Trident-Spool-Holders/.metadata.yml +++ b/printer_mods/elcrni/V2.4-Trident-Spool-Holders/.metadata.yml @@ -12,4 +12,13 @@ printer_compatibility: - V1.8 - V2.4 - VT +stl: +- STL/BB__spool_arm_left.stl +- STL/BB__spool_arm_left__without_panel_pin.stl +- STL/BB__spool_arm_right.stl +- STL/BB__spool_core.stl +- STL/Classic__spool_arm_left.stl +- STL/Classic__spool_arm_left__without_panel_pin.stl +- STL/Classic__spool_arm_right.stl +- STL/Classic__spool_holder.stl title: V.24/Trident Spool Holder diff --git a/printer_mods/evandepol/Crydom-GN-Guard/.metadata.yml b/printer_mods/evandepol/Crydom-GN-Guard/.metadata.yml index aee96651d..912b71b11 100644 --- a/printer_mods/evandepol/Crydom-GN-Guard/.metadata.yml +++ b/printer_mods/evandepol/Crydom-GN-Guard/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/crydom-gn-guard.stl title: Crydom GN Terminal Guard diff --git a/printer_mods/evandepol/Voron2.4-Cable-clamps/.metadata.yml b/printer_mods/evandepol/Voron2.4-Cable-clamps/.metadata.yml index 04297e7a2..52811309c 100644 --- a/printer_mods/evandepol/Voron2.4-Cable-clamps/.metadata.yml +++ b/printer_mods/evandepol/Voron2.4-Cable-clamps/.metadata.yml @@ -11,4 +11,8 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/Combination-Clamp-and-Ramp-350mm.stl +- STL/DIN-Rail-Cable-Mount-350mm.stl +- STL/Edge-2020-Cable-Clamp.stl title: Voron 2.4 cable clamps diff --git a/printer_mods/falo/lgx_lite_side_can/.metadata.yml b/printer_mods/falo/lgx_lite_side_can/.metadata.yml index 11fc65689..80978e36e 100644 --- a/printer_mods/falo/lgx_lite_side_can/.metadata.yml +++ b/printer_mods/falo/lgx_lite_side_can/.metadata.yml @@ -9,4 +9,6 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STL/lgx_lite_side_can_mount.stl title: LGX Lite CAN Side Mount diff --git a/printer_mods/falo/magnetic_grill_cover/.metadata.yml b/printer_mods/falo/magnetic_grill_cover/.metadata.yml index 02245f4e1..a4d88d27a 100644 --- a/printer_mods/falo/magnetic_grill_cover/.metadata.yml +++ b/printer_mods/falo/magnetic_grill_cover/.metadata.yml @@ -9,4 +9,7 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/exhaust_filter_cover.stl +- STL/exhaust_filter_grill_modified.stl title: Magnetic Exhaust Grill Cover diff --git a/printer_mods/falo/toolhead_pcb_to_can/.metadata.yml b/printer_mods/falo/toolhead_pcb_to_can/.metadata.yml index 414353106..762f6a8c1 100644 --- a/printer_mods/falo/toolhead_pcb_to_can/.metadata.yml +++ b/printer_mods/falo/toolhead_pcb_to_can/.metadata.yml @@ -10,4 +10,6 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STL/ToolheadPCBtoCANAdapter.stl title: Toolhead PCB to CAN Mount Adaptor diff --git a/printer_mods/filotto78/6mm_slot_cover/.metadata.yml b/printer_mods/filotto78/6mm_slot_cover/.metadata.yml index 4f59a4e89..1308bd7dd 100644 --- a/printer_mods/filotto78/6mm_slot_cover/.metadata.yml +++ b/printer_mods/filotto78/6mm_slot_cover/.metadata.yml @@ -10,4 +10,7 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/slot_cover.stl +- STL/slot_cover_one_side.stl title: 6mm slot cover diff --git a/printer_mods/frankaf/mgn12-euclid/.metadata.yml b/printer_mods/frankaf/mgn12-euclid/.metadata.yml index 995170bb1..89c06c7de 100644 --- a/printer_mods/frankaf/mgn12-euclid/.metadata.yml +++ b/printer_mods/frankaf/mgn12-euclid/.metadata.yml @@ -11,4 +11,7 @@ printer_compatibility: - V1.8 - V2.4 - VT +stl: +- STLs/x_carriage_frame_left_euclid.stl +- STLs/x_carriage_frame_right_euclid.stl title: Euclid Probe Carriage diff --git a/printer_mods/gamebofh/door-panels/.metadata.yml b/printer_mods/gamebofh/door-panels/.metadata.yml index 88f9d45dc..6b9030836 100644 --- a/printer_mods/gamebofh/door-panels/.metadata.yml +++ b/printer_mods/gamebofh/door-panels/.metadata.yml @@ -13,4 +13,6 @@ images: mod_version: 1 printer_compatibility: - VSW +stl: +- STL/modified-door-latch.stl title: Laser cut door panels diff --git a/printer_mods/gauravmm/crazy_mozzie_cw2/.metadata.yml b/printer_mods/gauravmm/crazy_mozzie_cw2/.metadata.yml index 8c3a1b554..72ae8d2d3 100644 --- a/printer_mods/gauravmm/crazy_mozzie_cw2/.metadata.yml +++ b/printer_mods/gauravmm/crazy_mozzie_cw2/.metadata.yml @@ -12,4 +12,7 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STL/SB_MQT_TH_Front.stl +- STL/SB_MQT_TH_Rear_CW2.stl title: Crazy Mozzie HF toolhead SB+CW2 diff --git a/printer_mods/gen2eng/z_carriage_stop_pass_through/.metadata.yml b/printer_mods/gen2eng/z_carriage_stop_pass_through/.metadata.yml index 1420a14a6..ca917b3bf 100644 --- a/printer_mods/gen2eng/z_carriage_stop_pass_through/.metadata.yml +++ b/printer_mods/gen2eng/z_carriage_stop_pass_through/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - VSW +stl: +- z_carriage_stop_pass_through.stl title: Switchwire LED wire pass through diff --git a/printer_mods/geoffreyyoung/dual_rail_guide/.metadata.yml b/printer_mods/geoffreyyoung/dual_rail_guide/.metadata.yml index bdf39ace1..1f68c0467 100644 --- a/printer_mods/geoffreyyoung/dual_rail_guide/.metadata.yml +++ b/printer_mods/geoffreyyoung/dual_rail_guide/.metadata.yml @@ -5,4 +5,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- dual_rail_installation_guide_center_x2.stl title: Dual Rail Installation Guide diff --git a/printer_mods/geoffreyyoung/lgx/.metadata.yml b/printer_mods/geoffreyyoung/lgx/.metadata.yml index 43d4d3606..8abbc7bcc 100644 --- a/printer_mods/geoffreyyoung/lgx/.metadata.yml +++ b/printer_mods/geoffreyyoung/lgx/.metadata.yml @@ -13,4 +13,11 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STLs/30mm-screws/30mm-lgx-blower-housing-rear.stl +- STLs/30mm-screws/30mm-lgx-mount-front.stl +- STLs/extras/lgx-cable-cover.stl +- STLs/extras/lgx-gear-cover.stl +- STLs/extras/lgx-lever-cover.stl +- STLs/mgn12/lgx-mgn12-mount-rear.stl title: LGX Info, Links, and Models diff --git a/printer_mods/gerritwellen/manta-m8p-bracket/.metadata.yml b/printer_mods/gerritwellen/manta-m8p-bracket/.metadata.yml index e274965e7..a21dd4908 100644 --- a/printer_mods/gerritwellen/manta-m8p-bracket/.metadata.yml +++ b/printer_mods/gerritwellen/manta-m8p-bracket/.metadata.yml @@ -6,4 +6,6 @@ mod_version: 1 printer_compatibility: - V2.4 - VT +stl: +- Manta-M8P_Bracket.stl title: Manta M8P Mount diff --git a/printer_mods/golas/v0-extended-tophat-hinge/.metadata.yml b/printer_mods/golas/v0-extended-tophat-hinge/.metadata.yml index 812ba90c3..f26ac917a 100644 --- a/printer_mods/golas/v0-extended-tophat-hinge/.metadata.yml +++ b/printer_mods/golas/v0-extended-tophat-hinge/.metadata.yml @@ -10,4 +10,24 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- stl/back_corner_a_x1.stl +- stl/back_corner_b_x1.stl +- stl/front-corner_x1.stl +- stl/Front_and_Rear_Midclip_x2.STL +- stl/front_corner_hinged_support_x1.stl +- stl/front_corner_hinged_x1.stl +- stl/hinge_for_stock_tophat_x2.stl +- stl/Left_and_Right_Midclip_x2.STL +- stl/side_plexi_clip_a_x1.stl +- stl/side_plexi_clip_b_x1.stl +- stl/singe_part_tophat_x1.stl +- stl/tophat_a_x1.stl +- stl/tophat_b_x1.stl +- stl/tophat_front_c_x1.stl +- stl/tophat_front_d_x1.stl +- stl/tophat_magnet_clip_a_x2.stl +- stl/tophat_magnet_clip_b_x2.stl +- stl/Upper_Corner_1_and_3_Clip_x2.STL +- stl/Upper_Corner_2_and_4_Clip_x2.STL title: V0.1 Extended tophat hinge diff --git a/printer_mods/golas/v0-trident-skirt-mix/.metadata.yml b/printer_mods/golas/v0-trident-skirt-mix/.metadata.yml index 7c0da938e..63ad4aeb2 100644 --- a/printer_mods/golas/v0-trident-skirt-mix/.metadata.yml +++ b/printer_mods/golas/v0-trident-skirt-mix/.metadata.yml @@ -20,4 +20,18 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- stl/connector_x1.stl +- stl/corner_back_left_c14_inlet_bom.stl +- stl/corner_front_left_x1.stl +- stl/corner_front_right_x1.stl +- stl/front_skirt_one_piece.stl +- stl/hartk_lcd_case_base_x1.stl +- stl/side_skirt_x2.stl +- stl/skirt_front_central_x1.stl +- stl/skirt_front_left_x1.stl +- stl/skirt_front_right_x1.stl +- stl/v0.1_trident_skirt_foot_rear_right_bowden_tube_connector_x1.stl +- stl/[a]_lcd_case_top_x1.stl +- stl/[a]_skirt_logo_x2.stl title: V0.1 Trident skirt remix with 12864 LCD diff --git a/printer_mods/hartk1213/Voron0.2_2.8_WaveshareDisplay/.metadata.yml b/printer_mods/hartk1213/Voron0.2_2.8_WaveshareDisplay/.metadata.yml index 19f8848b1..45116f9fd 100644 --- a/printer_mods/hartk1213/Voron0.2_2.8_WaveshareDisplay/.metadata.yml +++ b/printer_mods/hartk1213/Voron0.2_2.8_WaveshareDisplay/.metadata.yml @@ -8,4 +8,9 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/display_mount.stl +- STLs/[a]_display_cover_hex_logo_x1.stl +- STLs/[a]_display_cover_no_logo_x1.stl +- STLs/[a]_display_cover_stripes_x1.stl title: Voron0.2 2.8 Waveshare Display diff --git a/printer_mods/hartk1213/Voron0.2_Rear_Keystone_Skirt/.metadata.yml b/printer_mods/hartk1213/Voron0.2_Rear_Keystone_Skirt/.metadata.yml index 48bdf99cd..0ecae43f4 100644 --- a/printer_mods/hartk1213/Voron0.2_Rear_Keystone_Skirt/.metadata.yml +++ b/printer_mods/hartk1213/Voron0.2_Rear_Keystone_Skirt/.metadata.yml @@ -6,4 +6,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/v02_rear_skirt_keystone.stl title: Voron0.2 Rear Keystone Skirt diff --git a/printer_mods/hartk1213/Voron0_C14Inlet/.metadata.yml b/printer_mods/hartk1213/Voron0_C14Inlet/.metadata.yml index 954e077b3..cdb08e53f 100644 --- a/printer_mods/hartk1213/Voron0_C14Inlet/.metadata.yml +++ b/printer_mods/hartk1213/Voron0_C14Inlet/.metadata.yml @@ -9,4 +9,7 @@ images: mod_version: 1 printer_compatibility: - V0.1 +stl: +- STLs/Voron0_C14Inlet_MainHousing.stl +- STLs/Voron0_C14Inlet_RearCover.stl title: Voron0 C14Inlet diff --git a/printer_mods/hartk1213/Voron0_ExtendedLegs/.metadata.yml b/printer_mods/hartk1213/Voron0_ExtendedLegs/.metadata.yml index 5ed46d89a..e6b1e43cd 100644 --- a/printer_mods/hartk1213/Voron0_ExtendedLegs/.metadata.yml +++ b/printer_mods/hartk1213/Voron0_ExtendedLegs/.metadata.yml @@ -5,4 +5,7 @@ images: mod_version: 1 printer_compatibility: - V0.1 +stl: +- STLs/[a]_Foot_Front_Extended_x2.STL +- STLs/[a]_Foot_Rear_Extended_x2.STL title: Voron0 ExtendedLegs diff --git a/printer_mods/hartk1213/Voron0_ExtrusionSkirt/.metadata.yml b/printer_mods/hartk1213/Voron0_ExtrusionSkirt/.metadata.yml index e3eacf2f6..e7b16ef58 100644 --- a/printer_mods/hartk1213/Voron0_ExtrusionSkirt/.metadata.yml +++ b/printer_mods/hartk1213/Voron0_ExtrusionSkirt/.metadata.yml @@ -6,4 +6,9 @@ images: mod_version: 1 printer_compatibility: - V0.1 +stl: +- STL/Leg_End_Cap_x4.stl +- STL/Rear_Skirt_mirror_x1.stl +- STL/Rear_Skirt_x1.stl +- STL/Skirt_x3.stl title: Voron0 ExtrusionSkirt diff --git a/printer_mods/hartk1213/Voron0_Hinged_Top_Hat/.metadata.yml b/printer_mods/hartk1213/Voron0_Hinged_Top_Hat/.metadata.yml index fe8ae874f..3e48a0fcd 100644 --- a/printer_mods/hartk1213/Voron0_Hinged_Top_Hat/.metadata.yml +++ b/printer_mods/hartk1213/Voron0_Hinged_Top_Hat/.metadata.yml @@ -21,4 +21,20 @@ images: mod_version: 1 printer_compatibility: - V0.1 +stl: +- STL/Bottom_Hinge_x2.stl +- STL/Middle_Hinge_x2.stl +- STL/TopHat_Alignment_Pin_x2.stl +- STL/TopHat_hole_Drilling_Guide_x1.stl +- STL/TopHat_Rear_Outer_Panel_x1.stl +- STL/Top_Hinge_Mirror_x1.stl +- STL/Top_Hinge_x1.stl +- STL/[a]_Hinge_Stop_With_Back_Panel_Mirror_x1(2.5mm).stl +- STL/[a]_Hinge_Stop_With_Back_Panel_Mirror_x1(2mm).stl +- STL/[a]_Hinge_Stop_With_Back_Panel_Mirror_x1(3mm).stl +- STL/[a]_Hinge_Stop_With_Back_Panel_x1(2.5mm).stl +- STL/[a]_Hinge_Stop_With_Back_Panel_x1(2mm).stl +- STL/[a]_Hinge_Stop_With_Back_Panel_x1(3mm).stl +- STL/[a]_Hinge_Stop_With_No_Back_Panel_x2.stl +- STL/[a]_Hinge_Stop_x2.stl title: Voron0 Hinged Top Hat diff --git a/printer_mods/hartk1213/Voron0_MGN9C_X_Axis/.metadata.yml b/printer_mods/hartk1213/Voron0_MGN9C_X_Axis/.metadata.yml index 3d6d0bbb3..146501538 100644 --- a/printer_mods/hartk1213/Voron0_MGN9C_X_Axis/.metadata.yml +++ b/printer_mods/hartk1213/Voron0_MGN9C_X_Axis/.metadata.yml @@ -7,4 +7,8 @@ images: mod_version: 1 printer_compatibility: - V0.1 +stl: +- STLs/MGN9_1515_rail_guide_x2.stl +- STLs/x_carriage_miniaftb-MGN9C_x1.stl +- STLs/[a]_X_Endstop_Bumper_MGN9C_x1.stl title: Voron0 MGN9C X Axis diff --git a/printer_mods/hartk1213/Voron0_deck_panel_with_logo_and_VORON0/.metadata.yml b/printer_mods/hartk1213/Voron0_deck_panel_with_logo_and_VORON0/.metadata.yml index 9f6933b32..bcf8816ba 100644 --- a/printer_mods/hartk1213/Voron0_deck_panel_with_logo_and_VORON0/.metadata.yml +++ b/printer_mods/hartk1213/Voron0_deck_panel_with_logo_and_VORON0/.metadata.yml @@ -5,4 +5,8 @@ images: mod_version: 1 printer_compatibility: - V0.1 +stl: +- STLs/Voron0_deck_panel_with_logo_and_VORON0.stl +- STLs/[a]_Voron0_deck_panel__Logo.stl +- STLs/[b]_Voron0_deck_panel_0.stl title: Voron0 deck panel diff --git a/printer_mods/hartk1213/Voron0_display_dualcolor/.metadata.yml b/printer_mods/hartk1213/Voron0_display_dualcolor/.metadata.yml index 24cdf5cc9..699dbdb13 100644 --- a/printer_mods/hartk1213/Voron0_display_dualcolor/.metadata.yml +++ b/printer_mods/hartk1213/Voron0_display_dualcolor/.metadata.yml @@ -5,4 +5,7 @@ images: mod_version: 1 printer_compatibility: - V0.1 +stl: +- STLs/Housing_Front_with_logo.stl +- STLs/[a]_logo.stl title: Voron0 display dualcolor diff --git a/printer_mods/hartk1213/Voron2.4_GE5C/.metadata.yml b/printer_mods/hartk1213/Voron2.4_GE5C/.metadata.yml index cb4488972..746c57752 100644 --- a/printer_mods/hartk1213/Voron2.4_GE5C/.metadata.yml +++ b/printer_mods/hartk1213/Voron2.4_GE5C/.metadata.yml @@ -13,4 +13,10 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/[a]_z_belt_clamp_lower_x4.stl +- STLs/Z_Joints/z_joint_ge5c_igus_eglm-05_hall_effect_x1.stl +- STLs/Z_Joints/z_joint_ge5c_igus_eglm-05_slim_x4.stl +- STLs/Z_Joints/z_joint_ge5c_igus_eglm-05_x4.stl +- STLs/Z_Joints/z_joint_igus_kglm-05_x4.stl title: Voron2.4 GE5C diff --git a/printer_mods/hartk1213/Voron2.4_SexBolt_ZEndstop/.metadata.yml b/printer_mods/hartk1213/Voron2.4_SexBolt_ZEndstop/.metadata.yml index 2b9019223..40ca1dbca 100644 --- a/printer_mods/hartk1213/Voron2.4_SexBolt_ZEndstop/.metadata.yml +++ b/printer_mods/hartk1213/Voron2.4_SexBolt_ZEndstop/.metadata.yml @@ -15,4 +15,10 @@ mod_version: 1 printer_compatibility: - V2.4 - VT +stl: +- STLs/EndstopHousingBlank.stl +- STLs/EndstopHousingPissedOff.stl +- STLs/EndstopHousingSmile.stl +- STLs/EndstopHousingVoronLogo.stl +- STLs/TridentSexBolt.stl title: Voron2.4 SexBolt ZEndstop diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/.metadata.yml b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/.metadata.yml index 2b81a4f57..1e0149844 100644 --- a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/.metadata.yml +++ b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/.metadata.yml @@ -27,4 +27,51 @@ mod_version: 1 printer_compatibility: - V2.4 - VT +stl: +- STLs/Gantry/AB_Drive_Units/Trident/a_drive_frame_lower_pinned.stl +- STLs/Gantry/AB_Drive_Units/Trident/a_drive_frame_upper_pinned.stl +- STLs/Gantry/AB_Drive_Units/Trident/a_drive_frame_upper_with_jst_y_endstop_pinned.stl +- STLs/Gantry/AB_Drive_Units/Trident/b_drive_frame_lower_pinned.stl +- STLs/Gantry/AB_Drive_Units/Trident/b_drive_frame_upper_pinned.stl +- STLs/Gantry/AB_Drive_Units/V2/a_drive_frame_lower_pinned.stl +- STLs/Gantry/AB_Drive_Units/V2/a_drive_frame_upper_pinned.stl +- STLs/Gantry/AB_Drive_Units/V2/a_drive_frame_upper_with_jst_y_endstop_pinned.stl +- STLs/Gantry/AB_Drive_Units/V2/b_drive_frame_lower_pinned.stl +- STLs/Gantry/AB_Drive_Units/V2/b_drive_frame_upper_pinned.stl +- STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/a_drive_frame_lower_pinned.stl +- STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/a_drive_frame_lower_pinned24r2.stl +- STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/a_drive_frame_upper_pinned.stl +- STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/a_drive_frame_upper_pinned24r2.stl +- STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/a_drive_frame_upper_with_jst_y_endstop_pinned.stl +- STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/a_drive_frame_upper_with_jst_y_endstop_pinned24r2.stl +- STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/b_drive_frame_lower_pinned.stl +- STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/b_drive_frame_lower_pinned24r2.stl +- STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/b_drive_frame_upper_pinned.stl +- STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/b_drive_frame_upper_pinned24r2.stl +- STLs/Gantry/Front_Idlers/[a]_a_tensioner_pinned.stl +- STLs/Gantry/Front_Idlers/[a]_b_tensioner_pinned.stl +- STLs/Gantry/Front_Idlers/Old(24r1)/[a]_a_tensioner_pinned.stl +- STLs/Gantry/Front_Idlers/Old(24r1)/[a]_a_tensioner_pinned_24r2.stl +- STLs/Gantry/Front_Idlers/Old(24r1)/[a]_b_tensioner_pinned.stl +- STLs/Gantry/Front_Idlers/Old(24r1)/[a]_b_tensioner_pinned_24r2.stl +- STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_left_lower_pinned.stl +- STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_left_upper_pinned.stl +- STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_right_lower_pinned.stl +- STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_right_upper_pinned.stl +- STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_left_lower_pinned.stl +- STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_left_lower_pinned_24r2.stl +- STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_left_upper_pinned.stl +- STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_left_upper_pinned_24r2.stl +- STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_right_lower_pinned.stl +- STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_right_lower_pinned_24r2.stl +- STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_right_lower_pinned_no_wire_path.stl +- STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_right_upper_pinned.stl +- STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_right_upper_pinned_24r2.stl +- STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_right_upper_pinned_no_wire_path.stl +- STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/xy_joint_left_lower_pinned.stl +- STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/xy_joint_left_upper_pinned.stl +- STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/xy_joint_right_lower_pinned.stl +- STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/xy_joint_right_upper_pinned.stl +- STLs/Z_Idlers/[a]_z_tensioner_x4_6mm_pinned.stl +- STLs/Z_Idlers/[a]_z_tensioner_x4_9mm_pinned.stl title: Voron2.4 and Trident Pins Mod diff --git a/printer_mods/hartk1213/Voron2.4_Y_Endstop_Relocation/.metadata.yml b/printer_mods/hartk1213/Voron2.4_Y_Endstop_Relocation/.metadata.yml index 448170930..21e211e76 100644 --- a/printer_mods/hartk1213/Voron2.4_Y_Endstop_Relocation/.metadata.yml +++ b/printer_mods/hartk1213/Voron2.4_Y_Endstop_Relocation/.metadata.yml @@ -11,4 +11,7 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/Gantry/AB_Drive_Units/a_drive_frame_upper_with_jst_y_endstop.stl +- STLs/Gantry/AB_Drive_Units/OLD(24r1)/a_drive_frame_upper_with_jst_y_endstop.stl title: Voron2.4 Y Endstop Relocation diff --git a/printer_mods/henrikssn/parametric_spool_holder/.metadata.yml b/printer_mods/henrikssn/parametric_spool_holder/.metadata.yml index 6e42c648a..a52ddf4ff 100644 --- a/printer_mods/henrikssn/parametric_spool_holder/.metadata.yml +++ b/printer_mods/henrikssn/parametric_spool_holder/.metadata.yml @@ -7,4 +7,11 @@ printer_compatibility: - V1.8 - V2.4 - VT +stl: +- SpoolHolder_100mm.stl +- SpoolHolder_105mm.stl +- SpoolHolder_110mm.stl +- SpoolHolder_70mm.stl +- SpoolHolder_80mm.stl +- SpoolHolder_90mm.stl title: Parametric Spool Holder diff --git a/printer_mods/henrikssn/plug_panel_generic/.metadata.yml b/printer_mods/henrikssn/plug_panel_generic/.metadata.yml index c1f54941c..79c85bf98 100644 --- a/printer_mods/henrikssn/plug_panel_generic/.metadata.yml +++ b/printer_mods/henrikssn/plug_panel_generic/.metadata.yml @@ -6,4 +6,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/Plug_Panel_Generic.stl title: Plug Panel Mod for Generic Unfiltered Modules diff --git a/printer_mods/hergtoler/exhaust_120mm_duct/.metadata.yml b/printer_mods/hergtoler/exhaust_120mm_duct/.metadata.yml index 364768c36..a1430f0e1 100644 --- a/printer_mods/hergtoler/exhaust_120mm_duct/.metadata.yml +++ b/printer_mods/hergtoler/exhaust_120mm_duct/.metadata.yml @@ -14,4 +14,9 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/adapter_120mm_to_duct.stl +- STL/bowden_adapter_panel_mount.stl +- STL/exhaust_120mm_fan_mount.stl +- STL/exhaust_housing.stl title: Exhaust Housing for 120mm Fan and 4in Duct diff --git a/printer_mods/hernsl/bottom_panel_mag_clip/.metadata.yml b/printer_mods/hernsl/bottom_panel_mag_clip/.metadata.yml index 2e311ef3a..58f519fe7 100644 --- a/printer_mods/hernsl/bottom_panel_mag_clip/.metadata.yml +++ b/printer_mods/hernsl/bottom_panel_mag_clip/.metadata.yml @@ -7,4 +7,7 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- bottom_panel_magclip_skirt_x6.stl +- bottom_panel_maghold_panel_x6.stl title: Bottom Panel Mag Clip diff --git a/printer_mods/hhammarstrand/afterburner_connector_cover_42STH20-1004AS/.metadata.yml b/printer_mods/hhammarstrand/afterburner_connector_cover_42STH20-1004AS/.metadata.yml index 38f37468b..f4ce49b25 100644 --- a/printer_mods/hhammarstrand/afterburner_connector_cover_42STH20-1004AS/.metadata.yml +++ b/printer_mods/hhammarstrand/afterburner_connector_cover_42STH20-1004AS/.metadata.yml @@ -6,4 +6,6 @@ images: mod_version: 1 printer_compatibility: - VSW +stl: +- STL/Voron_SwitchWire_Connector_cover_LDO-42STH20-1004AS2.stl title: Afterburner connector cover for 42STH20-1004AS diff --git a/printer_mods/hijax_pl/corner_panel_clip/.metadata.yml b/printer_mods/hijax_pl/corner_panel_clip/.metadata.yml index 3fd0f89d5..c0e6d0f15 100644 --- a/printer_mods/hijax_pl/corner_panel_clip/.metadata.yml +++ b/printer_mods/hijax_pl/corner_panel_clip/.metadata.yml @@ -4,4 +4,7 @@ images: [] mod_version: 1 printer_compatibility: - V2.4 +stl: +- corner_panel_clip_3mm.stl +- corner_panel_clip_6mm.stl title: Corner panel clip diff --git a/printer_mods/hijax_pl/din_rail_mount/.metadata.yml b/printer_mods/hijax_pl/din_rail_mount/.metadata.yml index 49ecdbbe8..c4d5d99ce 100644 --- a/printer_mods/hijax_pl/din_rail_mount/.metadata.yml +++ b/printer_mods/hijax_pl/din_rail_mount/.metadata.yml @@ -9,4 +9,10 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- din_rail_mount.stl +- din_rail_mount_angle.stl +- din_rail_mount_angle_panel_3mm.stl +- din_rail_mount_angle_panel_4mm.stl +- din_rail_mount_angle_panel_6mm.stl title: Din Rail mount diff --git a/printer_mods/hijax_pl/ender_compatible_controller_mount/.metadata.yml b/printer_mods/hijax_pl/ender_compatible_controller_mount/.metadata.yml index ba24ee868..db6e80b2e 100644 --- a/printer_mods/hijax_pl/ender_compatible_controller_mount/.metadata.yml +++ b/printer_mods/hijax_pl/ender_compatible_controller_mount/.metadata.yml @@ -4,4 +4,7 @@ images: [] mod_version: 1 printer_compatibility: - V2.4 +stl: +- ender_compatible_din_rotated.stl +- ender_compatible_legacy.stl title: Controler Board adapters diff --git a/printer_mods/hoschi/FYSETC_Spider_DIN_Mount/.metadata.yml b/printer_mods/hoschi/FYSETC_Spider_DIN_Mount/.metadata.yml index 704e4a8f0..e65ef628d 100644 --- a/printer_mods/hoschi/FYSETC_Spider_DIN_Mount/.metadata.yml +++ b/printer_mods/hoschi/FYSETC_Spider_DIN_Mount/.metadata.yml @@ -14,4 +14,10 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/spider_bracket_horizontal_terminal.stl +- STL/spider_bracket_horizontal_usb.stl +- STL/spider_bracket_vertical_terminal.stl +- STL/spider_bracket_vertical_usb.stl +- STL/spider_spacer_x4.stl title: FYSETC Spider DIN Rail Mount diff --git a/printer_mods/hymness1/10x11mm_chain_VSW/.metadata.yml b/printer_mods/hymness1/10x11mm_chain_VSW/.metadata.yml index 0b4855fd0..fd076ba9b 100644 --- a/printer_mods/hymness1/10x11mm_chain_VSW/.metadata.yml +++ b/printer_mods/hymness1/10x11mm_chain_VSW/.metadata.yml @@ -7,4 +7,9 @@ mod_version: 1 printer_compatibility: - V0.2 - VSW +stl: +- STLs/chainlink.stl +- STLs/clip.stl +- STLs/fixed_end.stl +- STLs/unfixed_end.stl title: 10x11mm chain VSW diff --git a/printer_mods/hymness1/Quickdraw_probe_Voron_Switchwire/.metadata.yml b/printer_mods/hymness1/Quickdraw_probe_Voron_Switchwire/.metadata.yml index 675eeebb6..7d1d922f6 100644 --- a/printer_mods/hymness1/Quickdraw_probe_Voron_Switchwire/.metadata.yml +++ b/printer_mods/hymness1/Quickdraw_probe_Voron_Switchwire/.metadata.yml @@ -8,4 +8,11 @@ images: mod_version: 1 printer_compatibility: - VSW +stl: +- STLs/Dock_Arm_Endblock_Quickdraw_VSW.stl +- STLs/Dock_Quickdraw_VSW.stl +- STLs/Dock_Quickdraw_VSW_adjustable.stl +- STLs/Dock_Spacer_Quickdraw_VSW.stl +- STLs/Drop-In-Probe-Attachment_Quickdraw_VSW.stl +- STLs/Probe_Quickdraw_VSW.stl title: Quickdraw probe Voron Switchwire diff --git a/printer_mods/iblue/TophatExtractor/.metadata.yml b/printer_mods/iblue/TophatExtractor/.metadata.yml index f34d72aa2..f40d3023a 100644 --- a/printer_mods/iblue/TophatExtractor/.metadata.yml +++ b/printer_mods/iblue/TophatExtractor/.metadata.yml @@ -9,4 +9,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/tophat_with_extractor_part_back.stl +- STL/tophat_with_extractor_part_front.stl title: V0.1 Tophat Extractor diff --git a/printer_mods/jangrewe/Bitter_USB_Cam/.metadata.yml b/printer_mods/jangrewe/Bitter_USB_Cam/.metadata.yml index 837fd08a4..70b498059 100644 --- a/printer_mods/jangrewe/Bitter_USB_Cam/.metadata.yml +++ b/printer_mods/jangrewe/Bitter_USB_Cam/.metadata.yml @@ -1,9 +1,13 @@ -cad: +cad: - CAD/Bitter_USB_Cam.step +description: Modification of the "Angry Cam USB v2.0" webcam mount for 1515 extrusions images: - Images/Bitter_USB_Cam.png -description: Modification of the "Angry Cam USB v2.0" webcam mount for 1515 extrusions mod_version: 1 printer_compatibility: - V0 +stl: +- STL/Bitter_USB_Cam.stl +- STL/Front_Cover.stl +- STL/Rear_Cover.stl title: Bitter USB Cam diff --git a/printer_mods/jappaj/FanSaver/.metadata.yml b/printer_mods/jappaj/FanSaver/.metadata.yml index 16e99b5cf..ce1dc1c05 100644 --- a/printer_mods/jappaj/FanSaver/.metadata.yml +++ b/printer_mods/jappaj/FanSaver/.metadata.yml @@ -13,4 +13,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- VoronV0.1_FanSaver_rev0.6b.stl title: V0.1 FanSaver diff --git a/printer_mods/jasonc/Z_Idler_Shoulder_Bolt/.metadata.yml b/printer_mods/jasonc/Z_Idler_Shoulder_Bolt/.metadata.yml index eea8a0993..39f4aa8eb 100644 --- a/printer_mods/jasonc/Z_Idler_Shoulder_Bolt/.metadata.yml +++ b/printer_mods/jasonc/Z_Idler_Shoulder_Bolt/.metadata.yml @@ -7,4 +7,7 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- '[a]_z_tensioner_left_x2_9mm.stl' +- '[a]_z_tensioner_right_x2_9mm.stl' title: V2.4 Z-Idler Shoulder Bolt Mod diff --git a/printer_mods/jatson/plug_panel_schurter/.metadata.yml b/printer_mods/jatson/plug_panel_schurter/.metadata.yml index 95fcf5a3e..158b22133 100644 --- a/printer_mods/jatson/plug_panel_schurter/.metadata.yml +++ b/printer_mods/jatson/plug_panel_schurter/.metadata.yml @@ -11,4 +11,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/plug_panel_modif_schurter_CD44.1101.151.stl title: Plug panel mod for Schurter CD44.1101.151 power entry diff --git a/printer_mods/jaysuk/4.3_fly_screen_mount/.metadata.yml b/printer_mods/jaysuk/4.3_fly_screen_mount/.metadata.yml index 399d8918c..cb33175d2 100644 --- a/printer_mods/jaysuk/4.3_fly_screen_mount/.metadata.yml +++ b/printer_mods/jaysuk/4.3_fly_screen_mount/.metadata.yml @@ -8,4 +8,6 @@ mod_version: 1 printer_compatibility: - V0 - V0.1 +stl: +- STL/4.3_fly_screen_mount.STL title: 4.3 Fly Screen Mount diff --git a/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/.metadata.yml b/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/.metadata.yml index f5d4df88c..a5b268463 100644 --- a/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/.metadata.yml +++ b/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/.metadata.yml @@ -17,4 +17,9 @@ mod_version: 1 printer_compatibility: - V2.4 - VSW +stl: +- STL/2.4/faceplate.stl +- STL/2.4/screen_mount.stl +- STL/Switchwire/faceplate.stl +- STL/Switchwire/screen_mount.stl title: 4.3" Touchscreen Mount diff --git a/printer_mods/jeoje/Molex_MLX_Microfit_Bed_Connector_Mount/.metadata.yml b/printer_mods/jeoje/Molex_MLX_Microfit_Bed_Connector_Mount/.metadata.yml index 302301c6a..a1a198fe1 100644 --- a/printer_mods/jeoje/Molex_MLX_Microfit_Bed_Connector_Mount/.metadata.yml +++ b/printer_mods/jeoje/Molex_MLX_Microfit_Bed_Connector_Mount/.metadata.yml @@ -10,4 +10,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/MLX_MF3_Connector_Mount.stl title: Molex MLX and Microfit 3.0 Bed Connector Mount diff --git a/printer_mods/jeoje/Sturdy_Handles/.metadata.yml b/printer_mods/jeoje/Sturdy_Handles/.metadata.yml index 9c99f4067..a3eca0670 100644 --- a/printer_mods/jeoje/Sturdy_Handles/.metadata.yml +++ b/printer_mods/jeoje/Sturdy_Handles/.metadata.yml @@ -9,4 +9,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/sturdy_handles.stl title: Sturdy Handles diff --git a/printer_mods/jeoje/Z_Chain_Guide_Thermistor_Mount/.metadata.yml b/printer_mods/jeoje/Z_Chain_Guide_Thermistor_Mount/.metadata.yml index b627801b3..d9dc6a359 100644 --- a/printer_mods/jeoje/Z_Chain_Guide_Thermistor_Mount/.metadata.yml +++ b/printer_mods/jeoje/Z_Chain_Guide_Thermistor_Mount/.metadata.yml @@ -8,4 +8,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/Z_Chain_Guide_Thermistor_Mount.stl title: V2.4 Z Chain Guide with Integrated Chamber Thermistor Mount diff --git a/printer_mods/jgehrig/v0_lcdskirt/.metadata.yml b/printer_mods/jgehrig/v0_lcdskirt/.metadata.yml index e36ade0c6..df07a1f01 100644 --- a/printer_mods/jgehrig/v0_lcdskirt/.metadata.yml +++ b/printer_mods/jgehrig/v0_lcdskirt/.metadata.yml @@ -19,4 +19,13 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/Foot_Front.stl +- STL/Foot_Rear.stl +- STL/LCD_Face_Plate.stl +- STL/LCD_Mounting_Bracket.stl +- STL/Skirt_Front_Left.stl +- STL/Skirt_Front_Right.stl +- STL/Skirt_Side_A.stl +- STL/Skirt_Side_B.stl title: V0 LCD Touchscreen Skirt diff --git a/printer_mods/johanncc/Raspberry_Pi_Camera_Mount/.metadata.yml b/printer_mods/johanncc/Raspberry_Pi_Camera_Mount/.metadata.yml index 18b5c39ba..d7382f6a9 100644 --- a/printer_mods/johanncc/Raspberry_Pi_Camera_Mount/.metadata.yml +++ b/printer_mods/johanncc/Raspberry_Pi_Camera_Mount/.metadata.yml @@ -11,4 +11,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/Raspberry_Pi_Camera_Mount.stl title: Raspberry Pi Camera Mount diff --git a/printer_mods/joposter/v0_clippable_ledmounts/.metadata.yml b/printer_mods/joposter/v0_clippable_ledmounts/.metadata.yml index d021a7ca2..4cc57ffdd 100644 --- a/printer_mods/joposter/v0_clippable_ledmounts/.metadata.yml +++ b/printer_mods/joposter/v0_clippable_ledmounts/.metadata.yml @@ -8,4 +8,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STL/led_mount_clippable.stl +- STL/led_mount_clippable_mirrored.stl title: V0 Clippable LED Caselight diff --git a/printer_mods/khay/V2-200_4020_Electronics_Fan/.metadata.yml b/printer_mods/khay/V2-200_4020_Electronics_Fan/.metadata.yml index eddb8a2f0..4ef594fee 100644 --- a/printer_mods/khay/V2-200_4020_Electronics_Fan/.metadata.yml +++ b/printer_mods/khay/V2-200_4020_Electronics_Fan/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- side_skirt_4020_middle_fan.stl title: "Fan for V2-200mm\xB2" diff --git a/printer_mods/khay/V2_3x_Keystone_Plugpanel/.metadata.yml b/printer_mods/khay/V2_3x_Keystone_Plugpanel/.metadata.yml index e1b90bf41..449ae98c8 100644 --- a/printer_mods/khay/V2_3x_Keystone_Plugpanel/.metadata.yml +++ b/printer_mods/khay/V2_3x_Keystone_Plugpanel/.metadata.yml @@ -6,4 +6,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- Plug_Panel.stl title: 3x Keystone PlugPanel diff --git a/printer_mods/khay/micro_backplate/.metadata.yml b/printer_mods/khay/micro_backplate/.metadata.yml index df9876d92..eed169519 100644 --- a/printer_mods/khay/micro_backplate/.metadata.yml +++ b/printer_mods/khay/micro_backplate/.metadata.yml @@ -9,4 +9,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- microback_left.stl +- microback_right.stl title: V0 Micro Backplate diff --git a/printer_mods/kirby/v0_sherpa_mini_direct_drive/.metadata.yml b/printer_mods/kirby/v0_sherpa_mini_direct_drive/.metadata.yml index f9c190f40..ee327ffe8 100644 --- a/printer_mods/kirby/v0_sherpa_mini_direct_drive/.metadata.yml +++ b/printer_mods/kirby/v0_sherpa_mini_direct_drive/.metadata.yml @@ -5,4 +5,9 @@ images: [] mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/v0_dd_hotend_fan_left.stl +- STLs/v0_dd_hotend_fan_right.stl +- STLs/v0_dd_hotend_left.stl +- STLs/v0_dd_hotend_right.stl title: V0 Sherpa Mini Direct Drive Mod diff --git a/printer_mods/lakai/Bruag_Skirts/.metadata.yml b/printer_mods/lakai/Bruag_Skirts/.metadata.yml index 5f03594fb..9882f9d86 100644 --- a/printer_mods/lakai/Bruag_Skirts/.metadata.yml +++ b/printer_mods/lakai/Bruag_Skirts/.metadata.yml @@ -7,4 +7,11 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- lakai_exhaust_grill.stl +- lakai_middle.stl +- lakai_side_left_350mm.stl +- lakai_side_right_350mm.stl +- lakai_valance_a_350mm.stl +- lakai_valance_b_350mm.stl title: Bruag Skirts diff --git a/printer_mods/leandromarceddu/PowerSkirt/.metadata.yml b/printer_mods/leandromarceddu/PowerSkirt/.metadata.yml index 6922faed5..953e73811 100644 --- a/printer_mods/leandromarceddu/PowerSkirt/.metadata.yml +++ b/printer_mods/leandromarceddu/PowerSkirt/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- stl/PowerSkirt.stl title: PowerSkirt diff --git a/printer_mods/littleferris/V0_Skirt_Inlet/.metadata.yml b/printer_mods/littleferris/V0_Skirt_Inlet/.metadata.yml index ac0e0a2b2..86b0770d3 100644 --- a/printer_mods/littleferris/V0_Skirt_Inlet/.metadata.yml +++ b/printer_mods/littleferris/V0_Skirt_Inlet/.metadata.yml @@ -8,4 +8,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- skirt_Inlet.stl +- skirt_Inlet_mirror.stl title: V0 c14 Skirt Inlet diff --git a/printer_mods/madfabrications/Vertical_PSU_Mount/.metadata.yml b/printer_mods/madfabrications/Vertical_PSU_Mount/.metadata.yml index e73bb50f0..016e36b38 100644 --- a/printer_mods/madfabrications/Vertical_PSU_Mount/.metadata.yml +++ b/printer_mods/madfabrications/Vertical_PSU_Mount/.metadata.yml @@ -4,4 +4,7 @@ images: [] mod_version: 1 printer_compatibility: - V2.4 +stl: +- PsuMountBottom.stl +- PsuMountSpring.stl title: Vertical PSU Mount diff --git a/printer_mods/madros/V0_skirt_OLED/.metadata.yml b/printer_mods/madros/V0_skirt_OLED/.metadata.yml index 5be8871d3..f41206999 100644 --- a/printer_mods/madros/V0_skirt_OLED/.metadata.yml +++ b/printer_mods/madros/V0_skirt_OLED/.metadata.yml @@ -6,4 +6,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- stl/v0_skirt_Front_mod.STL title: V0 OLED-skirt diff --git a/printer_mods/maximilian-foerg/AB_Turbo_Mod/.metadata.yml b/printer_mods/maximilian-foerg/AB_Turbo_Mod/.metadata.yml index 53fc17ae8..7367e3f70 100644 --- a/printer_mods/maximilian-foerg/AB_Turbo_Mod/.metadata.yml +++ b/printer_mods/maximilian-foerg/AB_Turbo_Mod/.metadata.yml @@ -12,4 +12,6 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STL/AB_Turbo_Mod_Front.stl title: Afterburner Turbo Mod diff --git a/printer_mods/maximilian-foerg/VSW_Double_60mm_Fan_Mount/.metadata.yml b/printer_mods/maximilian-foerg/VSW_Double_60mm_Fan_Mount/.metadata.yml index b2160ec59..8f0cd5ba9 100644 --- a/printer_mods/maximilian-foerg/VSW_Double_60mm_Fan_Mount/.metadata.yml +++ b/printer_mods/maximilian-foerg/VSW_Double_60mm_Fan_Mount/.metadata.yml @@ -9,4 +9,6 @@ images: mod_version: 1 printer_compatibility: - VSW +stl: +- STL/VSW_Double_60mm_Fan_Mount.stl title: Switchwire Double 60mm Fan Mount diff --git a/printer_mods/mikepthomas/MKS_Mosfet_Mount/.metadata.yml b/printer_mods/mikepthomas/MKS_Mosfet_Mount/.metadata.yml index a5d62cede..5821865db 100644 --- a/printer_mods/mikepthomas/MKS_Mosfet_Mount/.metadata.yml +++ b/printer_mods/mikepthomas/MKS_Mosfet_Mount/.metadata.yml @@ -9,4 +9,6 @@ printer_compatibility: - V1.8 - V2.4 - VT +stl: +- STL/MKS_Mosfet_Mount.stl title: MKS Mosfet Mount diff --git a/printer_mods/mjoaris/10x11_Cable_Chain_Endcaps/.metadata.yml b/printer_mods/mjoaris/10x11_Cable_Chain_Endcaps/.metadata.yml index c8290c709..a7feeee43 100644 --- a/printer_mods/mjoaris/10x11_Cable_Chain_Endcaps/.metadata.yml +++ b/printer_mods/mjoaris/10x11_Cable_Chain_Endcaps/.metadata.yml @@ -16,4 +16,9 @@ mod_version: 1 printer_compatibility: - V1.8 - V2.4 +stl: +- 10x11-chain-endcap1_nosupport.STL +- 10x11-chain-endcap1_support.STL +- 10x11-chain-endcap2_nosupport.STL +- 10x11-chain-endcap2_support.STL title: 10x11 Cable Chain Endcaps diff --git a/printer_mods/mjoaris/Mini12864_LCD_Mount_for_V2.4/.metadata.yml b/printer_mods/mjoaris/Mini12864_LCD_Mount_for_V2.4/.metadata.yml index 87c51c8ed..4b9e1b83c 100644 --- a/printer_mods/mjoaris/Mini12864_LCD_Mount_for_V2.4/.metadata.yml +++ b/printer_mods/mjoaris/Mini12864_LCD_Mount_for_V2.4/.metadata.yml @@ -16,4 +16,10 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- base.STL +- rear_cover.STL +- '[a]_display_cover.STL' +- '[a]_hinge.stl' +- CAD/Alternative_base_(No_Heatset_Inserts)/LCD_Front_holes.STL title: Mini12864 LCD Mount diff --git a/printer_mods/mods.json b/printer_mods/mods.json index 85c4bfac2..c24453d74 100644 --- a/printer_mods/mods.json +++ b/printer_mods/mods.json @@ -4,3375 +4,4428 @@ "title": "V2.4 handle", "creator": "1-0-R", "description": "Handle for Voron 2.4", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "120decibell/exhaust_housing_side_entry", "title": "Side entry exhaust housing", "creator": "120decibell", "description": "Exhaust housing with dual cover screws and single or dual side entry filament paths.", - "printer_compatibility": "V1.8, V2.4, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "120decibell/huvud_chain_mount", "title": "Huvud Chain Mount", "creator": "120decibell", "description": "Huvud rear mount for Clockwork or LGX that supports a cable chain.", - "printer_compatibility": "V1.8, VT", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V1.8", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "3dpandme/Fannypack_zero", "title": "FANnypack zero", "creator": "3dpandme", "description": "Electronics cooling solution for Voron Zero", - "printer_compatibility": "V0.2, VSW, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "3dpandme/Thermistor_holder_zero", "title": "Thermistor holder zero", "creator": "3dpandme", "description": "Extended thermistor holder for Voron Zero", - "printer_compatibility": "V0.2, VSW, VT", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "3vilson/V0.1_Skirt_Holes", "title": "V0.1_Skirt_Holes", "creator": "3vilson", "description": "Skirt with Access Holes from the bottom", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "3vilson/V0.1_Skirt_Inlet", "title": "V0.1_Skirt_Inlet", "creator": "3vilson", "description": "Skirt with C14 inlet + New feet to screw into", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "42bios/corner_panel_clip_cable", "title": "Corner panel clip w. cable", "creator": "42bios", "description": "Corner panel clip with an internal cable path.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "42bios/exhaust_filter_housing_side", "title": "Exhaust filter housing - side thread", "creator": "42bios", "description": "Exhaust filter housing with the G1-8 \"thread on the side.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "42bios/relay_mount", "title": "relay mount", "creator": "42bios", "description": "relay-mount for 2x 2 channel relay modules.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "AVieira/Universal_Phone_Mount", "title": "Universal_Phone_Mount", "creator": "AVieira", "description": "This mod allows the use of different smartphones or possibly tablets that you may want to use for klipperscreen.", - "printer_compatibility": "V2.4r2", - "last_changed": "2023-12-27T15:53:59+00:00" + "printer_compatibility": [ + "V2.4r2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Akio/cable_routing_z_belt_cover", "title": "Hidden cable routing z belt cover", "creator": "Akio", "description": "Z belt covers that allow hidden cable routing.", - "printer_compatibility": "V2.4", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "AlexanderT-Moss/270-Clamping-Hinges", "title": "270 Clamping Hinges", "creator": "AlexanderT-Moss", "description": "Simple 270 degree hinges that clamp to the front panels instead of using VHB or drilled holes", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Andre/Mini_Afterburner_ADXL345_Mount", "title": "Mini Afterburner ADXL345 Mount", "creator": "Andre", "description": "Mount for an AXDL345 on the Mini Afterburner", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Andre/Mini_Afterburner_Strain_Relief", "title": "Mini Afterburner Strain Relief", "creator": "Andre", "description": "A replacement strain relief for the Mini Afterburner toolhead", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Andre/Revo_Nozzle_Skirt_Trident", "title": "Revo Nozzle Skirt", "creator": "Andre", "description": "A Revo nozzle box hidden in a Trident skirt.", - "printer_compatibility": "VT", - "last_changed": "2023-10-24T11:32:29+00:00" + "printer_compatibility": [ + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Andre/V0_Neopixel_Front_Bed_Mount", "title": "V0 Neopixel Front Bed Mount", "creator": "Andre", "description": "A replacement Front Bed Mount with room for a neopixel or dotstar behind the logo", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Backenfutter/Mount_for_Electreeks_Camera", "title": "Mount for Electreeks Camera", "creator": "Backenfutter", "description": "This Mod is a simple \"One Piece\" mount for the popular Electreeks Camera.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Badnoob/AB-BN", "title": "AB-BN Afterburner mod (5015)", "creator": "Badnoob", "description": "Improved Afterburner with 5015 fan", - "printer_compatibility": "V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Badnoob/ABBN_for_Stock", "title": "AB-BN for Stock Afterburner (4020)", "creator": "Badnoob", "description": "Improved Dragon and Rapido toolhead for stock Afterburner with 4020 fan", - "printer_compatibility": "V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Badnoob/Precision_AB_Drive", "title": "Precision AB Drive", "creator": "Badnoob", "description": "Changes the gearing for the AB drives to improve both resolution and torque, with a strenthened frame.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Baltojikale/LoudOwl_aka_Stabby", "title": "LoudOwl aka Stabby", "creator": "Baltojikale", "description": "Alternative dual 5015 part cooling fan toolhead for Afterburner", - "printer_compatibility": "V1.8, V2.4, VSW", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "BladeScraper-Designs/CornerPanel_SpoolHolder", "title": "CornerPanel_SpoolHolder", "creator": "BladeScraper-Designs", "description": "A better supported Spool Holder that mounts to a modified corner panel.", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "BladeScraper-Designs/Horizontal-Spool-Holder", "title": "Horizontal Spool Holder", "creator": "BladeScraper-Designs", "description": "Based on the stock holder but mounts to the horizontal extrusions.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "BladeScraper-Designs/Microswitch_Pod_With_Conector", "title": "Microswitch Pod With Connector", "creator": "BladeScraper-Designs", "description": "Microswitch pod with JST-XH 4-pin connector", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Blamm/lrs-100", "title": "LRS-100 DIN mount", "creator": "Blamm", "description": "DIN rail mount for an extra LRS-100 Power Supply", - "printer_compatibility": "V1.8, V2.4, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "BlueBear/Bowden_Fence", "title": "Bowden Fence", "creator": "BlueBear", "description": "A little \"fence\" to hold the tubes away from the belts.", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "BlueBear/Deck_Panel_Backpack", "title": "Deck Panel Backpack", "creator": "BlueBear", "description": "A mounting alternative if you don't want to drill your deck panel", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "BlueBear/Wago_221_mount", "title": "Clippable Wago 221 Mounts", "creator": "BlueBear", "description": "Mounts for Wago 221 to screw or clip-in on 1515 extrusions", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "BlueBear/Ziptie_Mount", "title": "Ziptie Mount", "creator": "BlueBear", "description": "Clippable Ziptie hooks for 1515 extrusions", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Boingomw/Wago_mount", "title": "Wago mount", "creator": "Boingomw", "description": "Smaller 5 port Wago mount that fits parallel to the support rails", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Bondtech/Mini-After-LGX-Lite", "title": "Mini-After-LGX-Lite", "creator": "Bondtech", "description": "LGX Lite Toolhead Setup For Voron V0.1.", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "ByteChild/2_Channel_Relay_DIN_Rail_Bracket", "title": "2-Channel Relay DIN Rail Bracket", "creator": "ByteChild", "description": "DIN Rail mounting bracket for an 2-Channel-Relay", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "ByteChild/ESP32_DIN_Rail_Bracket", "title": "ESP32 DIN Rail Bracket", "creator": "ByteChild", "description": "DIN rail mounting bracket for an ESP32", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "CannedBass/PITFT50_45_degree_mount", "title": "PITFT50 45-degree mount", "creator": "CannedBass", "description": "Mount that puts the screen at a 45-degree angle for more vertical clearance", - "printer_compatibility": "V2.4, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "CannedBass/Trident_Bed_Fans", "title": "Trident Bed Fans", "creator": "CannedBass", "description": "Bed fans for Trident", - "printer_compatibility": "VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Ch4rlesB/V0_Handles_Slim", "title": "V0 Handles Slim", "creator": "Ch4rlesB", "description": "Simple and slim handles for the V0", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "ChenTheDesignMaker/Z_Belt_Clip", "title": "Z Belt Clip", "creator": "ChenTheDesignMaker", "description": "Simple clip to keep extra Z belts clean and away from panels", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "D4rkCelerity/Raspberry_Pi_Zero_Bracket", "title": "Raspberry Pi Zero Bracket", "creator": "D4rkCelerity", "description": "Modified version of Trident RPi bracket to fit the smaller RPi Zero", - "printer_compatibility": "V0.2, V1.8, V2.4, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2", + "V1.8", + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "DC67/plug_panel_schaffner", "title": "Plug Panel Mod for Schaffner FN286-10-06", "creator": "DC67", "description": "A modified plug panel for the Power Entry Connector Schaffner FN286-10-06 with two integreated Keystone sockets.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "DaGlo/Voron_V0_Duet_2_WiFi_Mounting_Brackets", "title": "V0.1 Duet 2 Wifi mounting brackets", "creator": "DaGlo", "description": "Voron 0.1 Mounting brackets with/without RPi 4", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "DaGlo/Voron_V0_MW_PS_Bracket", "title": "Voron V0 Mean Well power supply bracket (Funssor Kit)", "creator": "DaGlo", "description": "Voron V0 Mean Well power supply bracket (Funssor Kit)", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "DaGlo/Voron_V0_SSR_Mount", "title": "Voron V0 SSR Mount", "creator": "DaGlo", "description": "Voron V0 SSR Mount for the bottom", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "DaGrooch13/Tophat_Exhaust_Filter", "title": "Tophat Exhaust Filter V0", "creator": "DaGrooch13", "description": "Activated charcoal exhaust filter with HEPA that replaces the rear tophat panel", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "DaStivi/the_Cephalopods_limb", "title": "The Cephalopod limb (BTT Octopus PRO Bracket(s))", "creator": "DaStivi", "description": "An alternative Din rail mount for BTT Octopus (PRO) boards", - "printer_compatibility": "V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Dan88/V0skirt", "title": "V0 one-part Skirts", "creator": "Dan88", "description": "One part Skirts for the V0", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Daten/Voron_2.4_Revo_Nozzle_Holder", "title": "Revo hotend skirt case", "creator": "Daten", "description": "A skirt case for the Revo hotends to reside R1 and R2", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "DerekBackus/LED_Holder", "title": "LED Strip Holder", "creator": "DerekBackus", "description": "Simple bracket to mount an LED strip", - "printer_compatibility": "", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "DerekBackus/Right_Skirt_Switch", "title": "Trident Right Skirt Switch", "creator": "DerekBackus", "description": "Moves power switch to right front skirt on the Trident", - "printer_compatibility": "", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Derpimus/Block_handle_v0.1", "title": "V0.1 Block Handle", "creator": "Derpimus", "description": "V0.1 Block Style Handle", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "DorjeDorf/Duet_3_3HC_Din_Bracket", "title": "Duet 3 3HC Din Bracket", "creator": "DorjeDorf", "description": "V2.4 Duet 3 3HC Din Bracket", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "DorjeDorf/Duet_3_6HC_Din_Bracket", "title": "Duet 3 6HC Din Bracket", "creator": "DorjeDorf", "description": "V2.4 Duet 3 6HC Din Bracket", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Dr-Info/V2.4r2_Z-Drive_Motor_Tensioner_Mod_Rear_Skirts", "title": "V2.4 Rear Skirt Mod for Z-Drive Motor Tensioner Mod", "creator": "Dr-Info", "description": "This mod enables the you to utilize the rear skirts, power and keystone, in your V2.4R2", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Dr-Info/corner_cable_cover_with_drop_down_holes", "title": "Corner Cable Cover with Drop Holes", "creator": "Dr-Info", "description": "Corner cable cover around Z-idler with drop holes near z frame and cutouts for inline wiring from 2020 extrustions", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "DrGhetto/GhettoPanels", "title": "Ghetto Panels", "creator": "DrGhetto", "description": "Printed panels for the Voron Zero", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "ElPoPo/RemovableDoors", "title": "Removable Doors", "creator": "ElPoPo", "description": "New hinge to easily remove the door and have a wide opening V2.x", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Electroleon/U2C_Mounting", "title": "U2C Mounting", "creator": "Electroleon", "description": "Bigtreetech U2C CAN Interface mounting bracket", - "printer_compatibility": "V0.2, V1.8, V2.4, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2", + "V1.8", + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Ellis/15x15_Drag_Chain_End", "title": "15x15 Drag Chain End", "creator": "Ellis", "description": "15x15 drag chain end piece", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Ellis/Badge_Retractor_Mount", "title": "Badge Retractor Mount", "creator": "Ellis", "description": "Extrusion mount for badge retractor to keep bowden tube out of the way.", - "printer_compatibility": "V2.4", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Ellis/Bed_Fans", "title": "Bed Fans", "creator": "Ellis", "description": "Bed fan control macros and 5015 bed fan mounts", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Ellis/Short_Z_Joints", "title": "Short Z Joints", "creator": "Ellis", "description": "Shorter Z joints for the v2.4", - "printer_compatibility": "V2.4", - "last_changed": "2023-10-24T11:32:29+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Ellis/Single_MGN9H_Carriage", "title": "Single MGN9H Carriage", "creator": "Ellis", "description": "Single MGN9H toolhead carriage with toolhead x endstop support (for umbilical)", - "printer_compatibility": "V1.8, V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "EmJay276/stealthburner_dragon_UHF_toolhead", "title": "Stealthburner Phaetus Dragon UHF and Phaetus Dragon UHF mini", "creator": "EmJay276", "description": "This mod adds a tool cartridge for the Phaetus Dragon UHF and Phaetus Dragon UHF mini hotend", - "printer_compatibility": "V2.4, VT", - "last_changed": "2023-12-26T23:18:46+00:00" + "printer_compatibility": [ + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Empusas/BTT_Filament_Motion_Sensor_Mount", "title": "Mounts for BTT Filament Motion Sensor", "creator": "Empusas", "description": "Mounts for Big Tree Tech Smart Filament Motion Sensor", - "printer_compatibility": "V0.2, V1.8, V2.4, VSW", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2", + "V1.8", + "V2.4", + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Empusas/PowerSkirt_FN284-10-06", "title": "Power Skirt 2.x FN284-10-06", "creator": "Empusas", "description": "Power Skirt for Schaffner FN284-10-06 V2.x", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Empusas/Terminal_Blocks_NC933_SPL-62", "title": "Mounts for Terminal Blocks NC933 SPL-62", "creator": "Empusas", "description": "Mounts for Terminal Blocks NC933 and SPL-62 from AliExpress", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Ferdi360/2.4_Bedfan_Backplates", "title": "2.4 Bedfan Backplates", "creator": "Ferdi360", "description": "Backplates for your Voron 2.4 that block hot air out of your bedfans from blowing onto your ACM panels to (slightly) improve airflow and temps. Also a nice way to showoff Voron branding and the serial of your printer.", - "printer_compatibility": "V2.4r2", - "last_changed": "2024-01-01T15:20:27+00:00" + "printer_compatibility": [ + "V2.4r2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Fiction/C270_mount", "title": "C270 mount", "creator": "Fiction", "description": "Logitech C270 webcam front-centre mount", - "printer_compatibility": "V2.4, VT", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Fiction/Crossrail", "title": "Crossrail", "creator": "Fiction", "description": "Across-the-rails LRS-200-24 or RSP-200-24 mount using DRP-03 brackets", - "printer_compatibility": "V2.4, VT", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Fiction/Exhaust_cover", "title": "Exhaust_cover", "creator": "Fiction", "description": "Cover for exhaust cutout in back panel", - "printer_compatibility": "V2.4, VT", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Fiction/Exhaust_cover_SFS", "title": "Exhaust_cover_SFS", "creator": "Fiction", "description": "Exhaust cover and BTT Smart Filament Sensor mount", - "printer_compatibility": "V2.4, VT", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Fiction/LGX_Lite_toolhead_PCB_mount", "title": "LGX Lite toolhead PCB mount", "creator": "Fiction", "description": "Mount for Hartk's toolhead PCB(s) for LGX Lite", - "printer_compatibility": "V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "FreeformFez/FilteredPower", "title": "V1.8 Filtered Power Inlet", "creator": "FreeformFez", "description": "V1.6 Filtered Inlet and Rocker Switch for V1.8", - "printer_compatibility": "V1.8", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V1.8" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "GSL12/pocketwatch_nema17", "title": "Pocketwatch Nema 17", "creator": "GSL12", "description": "Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe for V0 fork with 2020 extrusions, Nema17 and MGN9 or other printers.", - "printer_compatibility": "", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "GadgetAngel/Bed_Support_Alignment_Tools", "title": "Bed Support Extrusions Alignment Tools", "creator": "GadgetAngel", "description": "The bed support alignment tools will assist in helping align the \"bed support extrusions\" to the frame. When the alignment tools are placed in all four corners of the Voron Printer's frame the \"bed support extrusions\" will butt up against these tools so that you can screw the \"bed support extrusions\" down to the printer's frame in the correct position.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "GadgetAngel/Cricut_Voron_Logos", "title": "Cricut Voron Logos", "creator": "GadgetAngel", "description": "For any cutting machines or machines that rely on vector graphics and use .svg files. These vectors or .svg files are the Voron Design Logos for the Voron 2.4, Voron SwitchWire, Voron 0.0/0.1. and Trident These .svg files use a minimal amount of anchor points to achieve the vector shapes!", - "printer_compatibility": "V0.2, V2.4, VSW, VT", - "last_changed": "2023-10-24T11:32:29+00:00" + "printer_compatibility": [ + "V0.2", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Galvanic/Bowden_Tube_Guide", "title": "Bowden Tube Guide", "creator": "Galvanic", "description": "Bowden tube guide and CANBUS wire support", - "printer_compatibility": "V1.8, V2.4, VT", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "GiulianoM/FlyF407ZG", "title": "Fly F407ZG Mount", "creator": "GiulianoM", "description": "Mount for the Fly F407ZG: https://github.com/FLYmaker/FLYF407ZG", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Gizzle/ender-3_pro_switchwire", "title": "Ender 3 and Ender 3 Pro Switchwire Mod", "creator": "Gizzle", "description": "Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics and most other parts of the Voron Switchwire.", - "printer_compatibility": "VSW", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Hobson318/Belt_Tension_Wrench", "title": "Belt Tension Wrench", "creator": "Hobson318", "description": "Wrench for easier turning of the belt tension knobs on V0.1", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Hobson318/Klipper_Expander_Mount", "title": "Klipper Expander Mount", "creator": "Hobson318", "description": "Mounting brackets for the klipper expander using vhb tape or mounting screws", - "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2", + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Iakabos/C920_mount", "title": "c920 Mount", "creator": "Iakabos", "description": "Slim mount for logitech c920 webcam", - "printer_compatibility": "V1.8, V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Iakabos/V0_beltchain", "title": "V0 beltchains", "creator": "Iakabos", "description": "Modified beltchain parts for V0 Z cables", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "JD/RefillPlease", "title": "V2.4 Filament runout sensor", "creator": "JD", "description": "Replace the 2.4 stock bowden tube holder and add a filament runout sensor", - "printer_compatibility": "V1.8, V2.4, VT", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "JJFX/CRTouch_Snap_Mount", "title": "V2.4 CR Touch Snap Mount ", "creator": "JJFX", "description": "Mount to replace v2.4 (MGN9) probe with a Creality CR Touch", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "JNP/Back-Door", "title": "Back Door", "creator": "JNP", "description": "Door for easy hardware access", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "JNP/Deck_Panel_Rear", "title": "Deck Panel", "creator": "JNP", "description": "Covers the hotbed cables", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "JNP/Drawer", "title": "Drawer", "creator": "JNP", "description": "Drawer in four different versions", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "JNP/Front-Door", "title": "Front Door", "creator": "JNP", "description": "Door in a frame", - "printer_compatibility": "V0.2", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "JNP/HEPA-Filter", "title": "Hepa Filter", "creator": "JNP", "description": "Filter case with fan\u00b4s", - "printer_compatibility": "V0.2", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "JNP/Mid-Panel", "title": "Mid Panel", "creator": "JNP", "description": "Panel for SKR1.4/1.4 or SKR E3 mini mount", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "JNP/Neopixel-Y_Rails", "title": "Neopixel Case", "creator": "JNP", "description": "mounting for Neopixel strip with 8 LED\u00b4s", - "printer_compatibility": "V0.2", - "last_changed": "2023-10-24T11:32:29+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "JNP/Side-Panels", "title": "Side Panels", "creator": "JNP", "description": "Panels with intergrated hinge", - "printer_compatibility": "V0.2", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Jasrags/sw_fee_slot_filament_passthrough", "title": "Feed slot with filament pass-through", "creator": "Jasrags", "description": "A feed slot with a filament pass-through", - "printer_compatibility": "VSW", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "JeremyRuhland/V2.4_Plug_Panel_Generic_Combo", "title": "V2.4 Plug Panel Generic Combo", "creator": "JeremyRuhland", "description": "Skirt power panel for generic amazon plug/switch/fuse combo module, with 2 keystone sockets", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Jon/1515_led_mount", "title": "1515 LED Mount", "creator": "Jon", "description": "Snap in 1515 Led mount for WS2812B", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Jon/V0.1_Z_Cover", "title": "Z Cover for v0.1", "creator": "Jon", "description": "A cover to stop things from dropping down the Z motor and disappearing forever.", - "printer_compatibility": "V0.1", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.1" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Jon/adxl345_skirt_keystone", "title": "adxl345 skirt keystone", "creator": "Jon", "description": "Skirt keystone for ADXL345 using Microfit 3.0", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "JosAr/Klicky-Probe", "title": "Klicky Probe", "creator": "JosAr", "description": "Microswitch based inductive probe replacement", - "printer_compatibility": "V0.2, V1.8, V2.4, VT", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V0.2", + "V1.8", + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "KenadyDwag44/sw_lightbar", "title": "Switchwire Lightbar", "creator": "KenadyDwag44", "description": "A LED lightbar for switchwire", - "printer_compatibility": "VSW", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "KevinAkaSam/VEFACH", "title": "VEFACH", "creator": "KevinAkaSam", "description": "Voron Exhaust Filter Inserts for Activated Coal + Hepa", - "printer_compatibility": "V2.4, VT", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "KiloQubit/V0_reverse_bowden_mount", "title": "V0 Reverse Bowden Mount", "creator": "KiloQubit", "description": "V0 reverse bowden mount", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts", "title": "V2.4 Z Chain Mounts for 3 Hole Chains", "creator": "KiloQubit", "description": "Z chain mounts for 3 hole generic chain", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "KiloQubit/trident_schurter_power_inlet", "title": "Trident Schurter Inlet Skirt", "creator": "KiloQubit", "description": "Trident inlet skirt for mounting a Schurter DD11.0124 or similar inlet", - "printer_compatibility": "VT", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Koios/6mm_Glass", "title": "6mm Tempered Glass Mod", "creator": "Koios", "description": "Lock levers and rests for 6mm Tempered glass panels", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Koios/C920_Mount", "title": "C920 Low Profile Mount", "creator": "Koios", "description": "Low profile mount for a C920 Webcam", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Koios/LED_Mounts", "title": "LED Bar Mounts", "creator": "Koios", "description": "Low profile mount for led bar lights", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Koios/V0_C920_Tophat_Mount", "title": "V0 C920 Tophat Mount", "creator": "Koios", "description": "Mounting bracket for a Logitech C920 on the tophat", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Kosh42EFG/kirigami_bed_front", "title": "Kirigami bed front", "creator": "Kosh42EFG", "description": "Printed bed front for kirigami folded metal bed mount with Voron logo.", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Kruppes/Closed_Bottom", "title": "Encosed Bottom", "creator": "Kruppes", "description": "Modified printed parts and panel to fully enclose V0.", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Kruppes/Deck_Panel_inserts_logo", "title": "V0 Printed Deck with inserts", "creator": "Kruppes", "description": "Electronics Deck Panel using brass heat inserts. Optional with accent color Voron Logo.", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Kruppes/Tension_Meter", "title": "Belt Tension Meter", "creator": "Kruppes", "description": "Print in place tension meter to easily tighten multiple belts to the same tension", - "printer_compatibility": "V0.2, V1.8, V2.4, VSW", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V0.2", + "V1.8", + "V2.4", + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Kyleisah/CableGator", "title": "CableGator Cable Comb", "creator": "Kyleisah", "description": "A cable comb for simplifying and tidying wire harnesses for printers with drag chains", - "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2", + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "LJ/Scrubby", "title": "Scrubby", "creator": "LJ", "description": "Easy to use filament dust filter", - "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2", + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Le0n/Magnetic_Panels_with_Magnet_Inserts", "title": "Magnetic panels with Magnet Inserts", "creator": "Le0n", "description": "Magnetic panel mounts with magnets inserted into frame slots.", - "printer_compatibility": "V1.8, V2.4, VT", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Liselotte111/Red_Lizard_K1_UHF", "title": "Red Lizard K1 UHF toolhead", "creator": "Liselotte111", "description": "SB toolhead for Red Lizard K1 UHF", - "printer_compatibility": "V2, VT", - "last_changed": "2023-12-23T00:44:28+00:00" + "printer_compatibility": [ + "V2", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "LoCoCNC/3mm_tophat_panel_parts", "title": "3mm Top Hat Panels Clips", "creator": "LoCoCNC", "description": "Required to use the 3mm (1/8\") thick top hat panels for V0.1", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "LoCoCNC/MGN7H_Shims", "title": "MGN7H Shims", "creator": "LoCoCNC", "description": "Shims for making bearing cartridges coplanar", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "LoCoCNC/Mosquito_PTFE_Cutting_Jig", "title": "Mosquito PTFE 15mm Tube Cutting Jig", "creator": "LoCoCNC", "description": "Tool to precicely cut 15mm PTFE Tube", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "LoCoCNC/Strain_Relief_w_Microfit", "title": "Strain Relief w/ 10 Pin Microfit", "creator": "LoCoCNC", "description": "Strain Relief with 10 pin Microfit connector", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "LoCoCNC/ssr_strap", "title": "SSR Mounting Strap", "creator": "LoCoCNC", "description": "Mounting Strap for SSR on 1515 Extrusions", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "LoCoCNC/wire_grommets", "title": "V2.4 Bed Wiring Grommet", "creator": "LoCoCNC", "description": "Safely capture your bed wires thru the bottom panel", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "LoganFraser/ComboInlet", "title": "ComboInlet", "creator": "LoganFraser", "description": "Skirt pieces for Trident, 2.4 and 2.4r2 for combo inlets in 2 sizes.", - "printer_compatibility": "V2.4, VT", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "LoganFraser/HorseshoeSpoolHolder", "title": "HorseshoeSpoolHolder", "creator": "LoganFraser", "description": "Horseshoe Spool Holder - mounts internally for Trident, or externally for V0, V1, or V2 printers.", - "printer_compatibility": "V0.2, V1.8, V2.4, VT", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2", + "V1.8", + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "LoganFraser/PiPlate", "title": "PiPlate", "creator": "LoganFraser", "description": "PiPlate - Raspberry Pi3,4 mounting plate and Skirt Mod for V2.4/Trident", - "printer_compatibility": "V2.4, VT", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "LoganFraser/TridentInvertedElectronics", "title": "Trident Inverted Electronics", "creator": "LoganFraser", "description": "Flip the Trident electronics bay for top access.", - "printer_compatibility": "VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "LoganFraser/WagoMounts", "title": "WagoMounts", "creator": "LoganFraser", "description": "Wago Mounts for Din Rail or 2020 Extrusion mounting.", - "printer_compatibility": "V2.4, VSW, VT", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Long/Mantis_Dual_5015", "title": "Mantis Dual 5015 Toolhead", "creator": "Long", "description": "MGN12 Dual 5015 Toolhead for 2.4 & 1.8", - "printer_compatibility": "V1.8, V2.4", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Lukas/SSD1306_Case_Front_Cover", "title": "SSD1306 Case Front Cover", "creator": "Lukas", "description": "SSD1306 Mount replacement for Mini12864", - "printer_compatibility": "V2.4, VT", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "MCMBen/Voron0_Block_and_Tackle_Z_Belt", "title": "Voron0 Block & Tackle Z Belt", "creator": "MCMBen", "description": "A block & tackle belted Z solution using NEMA14. Ratios from 5:1 to 8:1 and friction prevent Z drop when powered off.", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "MSA/V0-Belt-tension-helper", "title": "Belt tension helper", "creator": "MSA", "description": "Belt tension helper for V0.1", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "MSiemons/TophatHingeV0.1", "title": "Tophat Hinge V0", "creator": "MSiemons", "description": "Simple hinge for V0 Tophat", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Mac10goesBRRRT/BTT_PiTFT", "title": "PiTFT Mount", "creator": "Mac10goesBRRRT", "description": "Mount for the BTT PiTFT Touchscreen", - "printer_compatibility": "V2.4, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Majarspeed/Hartk_Mount_Galileo", "title": "Hartk board mount galileo", "creator": "Majarspeed", "description": "It hangs stuff on your tool", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "MakeALeft/Switchwire_Front_Grill", "title": "Switchwire Clean Center Grill", "creator": "MakeALeft", "description": "Removed magnet holders on center panel for cleaner look", - "printer_compatibility": "", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "MapleLeafMakers/Kirigami_Stealth_Bumper", "title": "Kirigami Stealth Bumper", "creator": "MapleLeafMakers", "description": "an RGB-Powered front-bed mount for the Voron V0 with Kirigami Bed Frame", - "printer_compatibility": "V0", - "last_changed": "2023-12-31T15:37:53+00:00" + "printer_compatibility": [ + "V0" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "MapleLeafMakers/Matchstick_Diffusers", "title": "Matchstick Diffusers", "creator": "MapleLeafMakers", "description": "Mounts and Diffusers for the popular \"on-a-matchstick\" LEDs", - "printer_compatibility": "V0", - "last_changed": "2023-12-30T19:41:58+00:00" + "printer_compatibility": [ + "V0" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "MapleLeafMakers/Modesty_Mesh", "title": "Modesty Mesh", "creator": "MapleLeafMakers", "description": "Customizable mesh inserts to hide your messy electronics compartment.", - "printer_compatibility": "V0", - "last_changed": "2023-12-28T23:43:17+00:00" + "printer_compatibility": [ + "V0" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "MapleLeafMakers/Rainbow_Serial_Bumper", "title": "Rainbow Serial Bumper", "creator": "MapleLeafMakers", "description": "Just a little bit of extra bling for your Voron Trident", - "printer_compatibility": "VT", - "last_changed": "2023-12-29T17:37:31+00:00" + "printer_compatibility": [ + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "MapleLeafMakers/Stealth_Handles", "title": "Stealth Handles", "creator": "MapleLeafMakers", "description": "Stealthy and stylish handles for your V0", - "printer_compatibility": "V0.2", - "last_changed": "2023-12-27T16:27:29+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "MapleLeafMakers/URBI", "title": "Upper Rear Bowden Inlet (URBI)", "creator": "MapleLeafMakers", "description": "A Reverse Bowden Inlet for the upper-rear panel of the Voron Zero with an optional filament sensor.", - "printer_compatibility": "V0", - "last_changed": "2023-12-28T23:17:07+00:00" + "printer_compatibility": [ + "V0" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "MapleLeafMakers/Umbilical_Collar", "title": "Umbilical Collar", "creator": "MapleLeafMakers", "description": "An adjustable umbilical collar for the stock motor panel on the V0", - "printer_compatibility": "V0", - "last_changed": "2023-12-27T15:57:10+00:00" + "printer_compatibility": [ + "V0" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "MasturMynd/V0.1-Stealth_Zero", "title": "Stealth Zero", "creator": "MasturMynd", "description": "A low poly gantry with front tensioners and optional front mounted x rail", - "printer_compatibility": "V0.1", - "last_changed": "2023-10-26T05:29:07+00:00" + "printer_compatibility": [ + "V0.1" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "MasturMynd/V2-2-Piece_Z_Tensioners", "title": "2-Piece Z Tensioners", "creator": "MasturMynd", "description": "Splits the tensioners into two pieces, allowing the tensioner to be printed in the strongest possible orientation", - "printer_compatibility": "V2", - "last_changed": "2023-10-26T05:29:07+00:00" + "printer_compatibility": [ + "V2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "MathematicalPotato/v0.1_belted_z_drive", "title": "V0.1 Belted Z Drive", "creator": "MathematicalPotato", "description": "Conversion to a belted Z axis for the V0.1 adapted from theFPVGeek's mod for the V0.0", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Maverick/MiniSB_LGX_Lite", "title": "MiniSB_LGXL", "creator": "Maverick", "description": "A Bondtech LGX Lite variant of the MiniSB", - "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2", + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Maverick/MiniSB_Rapido", "title": "MiniSB_Rapido", "creator": "Maverick", "description": "Modified MiniSB to use a Rapido hotend", - "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2", + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Maverick/MiniSB_Sharkfin", "title": "MiniSB_Sharkfin", "creator": "Maverick", "description": "Modified MiniSB to use a Sharkfin Extruder", - "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2", + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Maverick/V0.2_Stealth_Skirts", "title": "V0.2 Stealth Skirts", "creator": "Maverick", "description": "Juiced up skirts for the V0.2", - "printer_compatibility": "V0.2", - "last_changed": "2023-10-24T08:48:08+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Mckurt/Switchwire_Y_Belt_Tensioner", "title": "Switchwire Y Belt Tensioner", "creator": "Mckurt", "description": "Switchwie Y axis Belt Tensioner", - "printer_compatibility": "VSW", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Mellow/V0_Fly-Gemini", "title": "V0 Fly-Gemini", "creator": "Mellow", "description": "Fly-Gemini adapted model for V0", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail", "title": "LGX mount for V0.1 with 2nd X rail", "creator": "MikesMods", "description": "V0.1 mod for mounting Bondtech LGX extruder with addition of 2nd X rail on the back of the 1515 extrusion.", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Minsekt/Rear_Umbilical", "title": "Rear Umbilical", "creator": "Minsekt", "description": "Rear Umbilical mounting solution including a relocated Y-Endstop", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "MrBean66/SKR_PRO_Mount", "title": "SKR Pro DIN Mount", "creator": "MrBean66", "description": "Simple mod to mount the SKR Pro board from BTT to a DIN rails.", - "printer_compatibility": "V1.8, V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "MrDespair/MiniAB_Pinda", "title": "MiniAB Pinda Probe Mount", "creator": "MrDespair", "description": "Replacement MiniAB Cowling to add a mount for a Pinda style probe.", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Mrgl-Mrgl/LGX_Lite_Mount", "title": "LGX Lite Mount", "creator": "Mrgl-Mrgl", "description": "a mount for the LGX Lite", - "printer_compatibility": "V1.8, V2.4, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Nashuar/V0_Dragon_ToolheadStockScrews", "title": "V0 Dragon Toolhead M2.5x8", "creator": "Nashuar", "description": "This toolhead uses the stock M2.5 screw that came with the dragon hotend", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Nomsplease/60mm_Shaft_Jig", "title": "60mm Shaft Jig", "creator": "Nomsplease", "description": "Simple jig for cutting and grinding 60mm Z shafts", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Nomsplease/V0_duet_wifi_mount", "title": "Duet Wifi Mount", "creator": "Nomsplease", "description": "Duet wifi mount in pocketwatch location", - "printer_compatibility": "V0.2", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Nomsplease/V0_led_mounts", "title": "LED Mounts", "creator": "Nomsplease", "description": "Basic LED mounts for 10 and 12mm strips", - "printer_compatibility": "V0.2", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Nomsplease/V0_panel_mounts", "title": "Remixed Panel Mounts", "creator": "Nomsplease", "description": "Remixed rear bottom panel mounts with stop", - "printer_compatibility": "V0.2", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Nomsplease/V0_pi_zero_camera_mount", "title": "Pi Cam/ZeroW Mount", "creator": "Nomsplease", "description": "Mount for pi camera and ZeroW", - "printer_compatibility": "V0.2", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Nomsplease/V0_pocket_watch_rear_relocation", "title": "Pocket Watch Rear Reolcation Bracket", "creator": "Nomsplease", "description": "Pocket watch rear reolcation bracket", - "printer_compatibility": "V0.2", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Oakman/BTT_24V_UPS_Metal_DIN_Mount", "title": "BTT 24V UPS Metal DIN Mount", "creator": "Oakman", "description": "Adapter to use a metal DIN mount for the BTT 24V UPS", - "printer_compatibility": "V1.8, V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Oakman/FYSETC_Spider_Metal_DIN_Mount", "title": "FYSETC Spider Metal DIN Mount", "creator": "Oakman", "description": "Use a metal DIN mount for your FYSETC Spider", - "printer_compatibility": "V1.8, V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Oakman/RPI_Metal_DIN_Mount", "title": "RPI Metal DIN Mount", "creator": "Oakman", "description": "Adapter for metal DIN mounting the Raspberry Pi", - "printer_compatibility": "V1.8, V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "OboMaker3D/C17-EXT", "title": "C17-EXT Filter HEPA Carbon", "creator": "OboMaker3D", "description": "Replaces standard filter with new HEPA Crabon and 120mm fan V1.1", - "printer_compatibility": "V2.4, VSW, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "OboMaker3D/C17-EXT-CARTRIDGE", "title": "C17-EXT-CARTRIDGE for C17-EXT filter", "creator": "OboMaker3D", "description": "Alternative to a commercial cartridge for the C17-EXT filter", - "printer_compatibility": "V2.4, VSW, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Phalanx/Other-V2-Idlers", "title": "\"Other\" Idlers Mod", "creator": "Phalanx", "description": "Allow usage of wider toolheads on the V2", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch", "title": "V0.1 Z nozzle endstop switch", "creator": "Polar-Ted", "description": "Sexbolt style switch for V0", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Polar-Ted/V0_Two_Piece_Back_Panel", "title": "V0.1 Two Piece Back Panel", "creator": "Polar-Ted", "description": "Vented 2 piece back panel for V0", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Polared/Power_Inlet_w_Keystone_Insert", "title": "Power Inlet with Keystone Insert", "creator": "Polared", "description": "Voron 0.1 Power inlet with keystone insert slot", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Printopal/Magnetic_top_panel", "title": "Magnetic top panel", "creator": "Printopal", "description": "Top panel with magnets allows for quick installation and removal", - "printer_compatibility": "V1.8, V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "PsychoShaft/C92X_PsycHoShafts_Mount", "title": "C92X_PsycHoShafts_Mount", "creator": "PsychoShaft", "description": "2020 Top profile 920 camera mount / 2 point axis pivot", - "printer_compatibility": "V1.8, V2.4, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "QuackProfit/V0-Adafruit-Y_Rails", "title": "V0 Adafruit NeoPixel LED Mounts", "creator": "QuackProfit", "description": "Mount Adafruit PCB NeoPixel Sticks on the V0 Y-rail extrusions", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Rhastlyn/60mmFanCover", "title": "60mm Fan Cover", "creator": "Rhastlyn", "description": "A easy to install cover for spec 60mm fans originally designed for a 2.4 build", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Rhastlyn/WansviewCameraMount", "title": "Wansview 1080p Camera Mount", "creator": "Rhastlyn", "description": "A camera mount that replaces the OEM part to allow the camera to be mounted to a 2020 extrusion", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "RockNLol/RockNRoll", "title": "RockNRoll", "creator": "RockNLol", "description": "Rockers to roll the printer on its back for easier access to the electronics compartment", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "ScramblerUSA/SideSkirtPowerSwitch", "title": "Side Skirt Power Switch", "creator": "ScramblerUSA", "description": "Skirt-mounted rocker switch for easy access for Voron 2.4", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "See1807/Voron_V0_Exhaust_and_LED_Mod", "title": "TopHat Exhaust and LED Light", "creator": "See1807", "description": "A mount for 10mm LED strips and Exhaust for Voron V0", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Shiftingtech/Trident_dual_power_switch", "title": "Trident Dual Power Switch", "creator": "Shiftingtech", "description": "A replacement skirt, allowing 2 power switches", - "printer_compatibility": "VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "ShinyPants/Orange_Pi_3_LTS_DIN", "title": "OrangePi 3 LTS DIN Rail bracket", "creator": "ShinyPants", "description": "A DIN rail mount for OrangePi LTS 3", - "printer_compatibility": "V1.8, V2.4, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Shteeeeeve/V01-LED-Tophat", "title": "V0.1 LED Tophat", "creator": "Shteeeeeve", "description": "V0.1 LED Tophat w/ 24V LED Lightstrip", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Slidr/PanzerBalls2.4", "title": "PanzerBalls 2.4", "creator": "Slidr", "description": "Squash Ball Feet for V2.4", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Slidr/PanzerChain2.4", "title": "PanzerChain 2.4", "creator": "Slidr", "description": "Energychain for V2.4", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Spaghetti-Bolognese/LCD_case_mod", "title": "LCD Case Mod", "creator": "Spaghetti-Bolognese", "description": "Improvements to the V2.4 mini12864 LCD case inc E-stop button cover", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Spaghetti-Bolognese/Z_drive_motor_mount", "title": "Simplified Z Drive Motor Mount", "creator": "Spaghetti-Bolognese", "description": "Z drive motor mount bracket mod to improve pulley to belt alignment", - "printer_compatibility": "V2.4", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "StvPtrsn/320mm_Build", "title": "Skirts for a 320mm Build", "creator": "StvPtrsn", "description": "Skirts for a 320mm build", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "StvPtrsn/Keystone_Jack_Filtered_Mains_Panel", "title": "Keystone Jack for Filtered Mains Panel", "creator": "StvPtrsn", "description": "Add a keystone jack to your filtered mains plug panel", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "StvPtrsn/Parts_Jigs_and_Mods", "title": "Parts_Jigs and Mods", "creator": "StvPtrsn", "description": "Parts, Jigs and modifications I use for my builds", - "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2", + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "StvPtrsn/Side_Fan_Support_No_Tape", "title": "Side Fan Support, No Tape", "creator": "StvPtrsn", "description": "Mount the 60mm side fans and inserts without tape", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Takuya/USBCameraMount", "title": "WANSVIEW USB Camera Mount", "creator": "Takuya", "description": "WANSVIEW 1080p Camera Mount for Voron 2.4", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "TheSquiffy/V0_Belts_holder", "title": "V0 Belts holder", "creator": "TheSquiffy", "description": "V0 Belts Holder", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "TiagoBarata/Logitech_C270_Mount", "title": "Logitech C270 Mount", "creator": "TiagoBarata", "description": "Logitech C270 Top Center Mount", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Tircown/DIN_mount_RS-15-5", "title": "DIN mount RS-15-5 PSU", "creator": "Tircown", "description": "A DIN mount for the RS-15-5", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Tircown/Display_mount_5inch", "title": "Display mount 5\"", "creator": "Tircown", "description": "Tiltable mount for a 5\" tactile display", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Tircown/Raspberry_plug_panel", "title": "Raspberry in plug panel", "creator": "Tircown", "description": "Raspberry mount vertically in the plug panel, allow easy access to ports", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Tircown/V01_skirt_buttons", "title": "V0.1 Skirt buttons", "creator": "Tircown", "description": "Buttons for V0.1 spec skirts", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Triano/Ender_3Pro_Switchwire", "title": "Ender 3 Pro or V2 to Switchwire Mod", "creator": "Triano", "description": "Convesion of an Ender 3 Pro or V2 to a Switchwire", - "printer_compatibility": "VSW", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Ultrawaffles/Ender_3_to_SW", "title": "Ender 3 to SW conversion", "creator": "Ultrawaffles", "description": "A conversion mod for the ender 3 to switchwire. Designed to allow for enclosure and uses original ender 3 motors and switches", - "printer_compatibility": "VSW", - "last_changed": "2023-10-24T11:32:29+00:00" + "printer_compatibility": [ + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "VinnyCordeiro/RGB_LED_grid_for_SB", "title": "RGB LED grid for Stealthburner", "creator": "VinnyCordeiro", "description": "A small RGB LED grid for Stealthburner's logo", - "printer_compatibility": "V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Weaslus/Electronics-Bay-Seperator", "title": "Electronics Bay and Enclosure Seperator", "creator": "Weaslus", "description": "Better enclose chamber and keep heat from electronics", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "ZZP8202/Pull-out_electrical_store", "title": "Pull-out electrical store", "creator": "ZZP8202", "description": "Voron 2.4 Pull-out electrical store\uff08350mm only\uff09", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Zen3D/V0_1515_T-nut", "title": "V0 1515 T-nut", "creator": "Zen3D", "description": "M3 square and hex nuts for Voron0 1515 frame", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Zen3D/V0_Handle", "title": "V0 Handle", "creator": "Zen3D", "description": "Voron0 Handle for 3mm panels", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Zen3D/V0_MidPanel_HexPattern", "title": "V0 MidPanel HexPattern", "creator": "Zen3D", "description": "Voron0 MidPanel with Hex pattern and Wire cover", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "Zen3D/V0_Skirt", "title": "V0 Skirt set", "creator": "Zen3D", "description": "SSR, PowerSwitch, Adxl, Nameplate and color change printing", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-14T13:24:54+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "aTinyShellScript/RS_PSU_DIN_Brackets", "title": "RS PSU DIN Bracket", "creator": "aTinyShellScript", "description": "DIN brackets for MeanWell RS PSUs with 80mm spacing.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "ademuri/Lights_Camera_Voron", "title": "Lights, Camera, Voron", "creator": "ademuri", "description": "A mount for LED strips and Picam for the V0.1", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "aeresov/MeanWell_UHP_DIN_mount", "title": "MeanWell UHP-xxx DIN mount", "creator": "aeresov", "description": "A bracket for MeanWell UHP series PSU (200, 350 and 500) to mount it across 2 DIN rails.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "aeresov/Raspberry_Pi_DIN_mount", "title": "Raspberry Pi DIN mount", "creator": "aeresov", "description": "A bracket for Raspberry Pi 3/4 to mount it onto DIN rail, along or across.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "aeresov/SKR_DIN_mount", "title": "SKR 1.3/1.4 DIN mount", "creator": "aeresov", "description": "A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or across.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "aeresov/TL_filament_sensor_bracket", "title": "TL filament sensor bracket", "creator": "aeresov", "description": "A bracket for TL filament sensor to mount near stock spool holder.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "aeresov/cable_tie_DIN_mount", "title": "cable tie DIN mount", "creator": "aeresov", "description": "A bracket for cable ties to route cables across DIN rails.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "al3ph/analog_timer_mount", "title": "Analog Timer Mount", "creator": "al3ph", "description": "A skirt mount for analog timer", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "al3ph/filament_runout", "title": "Filament Runout Sensor", "creator": "al3ph", "description": "A simple filament runout sensor", - "printer_compatibility": "V0.2, V1.8, V2.4, VSW", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2", + "V1.8", + "V2.4", + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "al3ph/led_mount", "title": "LED Mount", "creator": "al3ph", "description": "A mount for 10mm LED WS2812 strips", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "al3ph/pl05_mount", "title": "PL05 Sensor Mount", "creator": "al3ph", "description": "A mount PL05 inductive sensor", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "alanho/BTT_PITFT50_v2_Mount", "title": "BTT PITFT50 v2 Mount", "creator": "alanho", "description": "A mount for the BTT PITFT50 v2 Touch Display", - "printer_compatibility": "V2.4", - "last_changed": "2023-10-24T08:48:08+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "albert/IKEA_Dioder_Led_Mount", "title": "IKEA Dioder Led Mount", "creator": "albert", "description": "A mount for the IKEA Dioder LED strip", - "printer_compatibility": "V2.4", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "antoinecellerier/ds18b20-sensor-mount", "title": "DS18B20 Sensor Mount", "creator": "antoinecellerier", "description": "DS18B20 temperature sensor mount", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "ardichoke/v0-long-thumb-nut", "title": "V0 Long Thumb Nut", "creator": "ardichoke", "description": "Taller thumb nuts for V0 bed", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "arkeet/dti-mount", "title": "Dial test indicator mount", "creator": "arkeet", "description": "A toolhead mount for a dial test indicator, where the tip is located at the nozzle.", - "printer_compatibility": "V1.8, V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "arkeet/magnet-fan-cover", "title": "Magnetic hotend fan cover", "creator": "arkeet", "description": "A replacement hotend fan cover, held with magnets instead of screws.", - "printer_compatibility": "V1.8, V2.4, VSW", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "arkeet/mgn12", "title": "MGN12 X-axis", "creator": "arkeet", "description": "Replaces the dual MGN9H rails with a single MGN12H.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "arkeet/v0-dc-inlet", "title": "V0 DC inlet", "creator": "arkeet", "description": "Skirt inlet for external 24V DC power supply.", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "baccula/revo_skirt_nozzle_holder", "title": "Revo Nozzle Holder for v2.4 350", "creator": "baccula", "description": "A remix of Andre's design allowing for skirt storage of 4 E3D Revo nozzles in the skirt of your 350mm v2.4.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "beaugalbraith/Nova_Printhead", "title": "Nova Printhead", "creator": "beaugalbraith", "description": "Use Nova Hotend with Afterburner", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "bobbleheed/Filament_Runout", "title": "Filament Runout Sensor", "creator": "bobbleheed", "description": "Filament runout sensor that replaces the stock bowden retainer", - "printer_compatibility": "V1.8, V2.4, VT", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "bobbleheed/Magnetic_Panels", "title": "Magnetic Panels", "creator": "bobbleheed", "description": "Magnetic clips to allow for easy removal and installation of panels", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "btp/Galileo_Switchwire_Chain_Mount", "title": "Galileo chain mount (befenybay)", "creator": "btp", "description": "Modified chain mount position to cater for difference with Galileo Clockwork", - "printer_compatibility": "VSW", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "buzzdalf/connector_cover", "title": "v1.8/2.4 Afterburner connector cover for 42STH20-1004AS", "creator": "buzzdalf", "description": "v1.8/2.4 Connector cover for 42STH20-1004AS", - "printer_compatibility": "V1.8, V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "buzzdalf/ender_switchwire_taller_z", "title": "Ender 3 Switchwire Taller Z Mod", "creator": "buzzdalf", "description": "Taller Z Mod", - "printer_compatibility": "VSW", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "buzzdalf/ytension", "title": "Ender 3 Switchwire Y Tensioner Mod", "creator": "buzzdalf", "description": "Y Tension Mod", - "printer_compatibility": "VSW", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "bythorsthunder/MGN9_Backers", "title": "MGN9 Backers Idlers", "creator": "bythorsthunder", "description": "New idler uppers for MGN9 Extrusion backers", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "bythorsthunder/Stealthburner_Rapido_Uhf", "title": "Stealthburner Rapido UHF", "creator": "bythorsthunder", "description": "Stealthburner mod for Rapido UHF", - "printer_compatibility": "V2.4, VSW, VT", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "chirpy/NozzleWiper", "title": "V0.1 Nozzle Wiper", "creator": "chirpy", "description": "Servo powered nozzle wiper and purge bucket", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "chirpy/RunoutUnklicky", "title": "Runout UnKlicky Sensor", "creator": "chirpy", "description": "Runout UnKlicky Sensor is a filament runout sensor with mounts for 1515 and 2020 extrusions", - "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.2", + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "chirpy/TipTophat", "title": "V0.1 Raised Tophat", "creator": "chirpy", "description": "Alternative Tophat design that uses stock panels and raises height by 30mm", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "chri.kai.in/20x20mm_Profile_Covers", "title": "20x20mm Profile Covers", "creator": "chri.kai.in", "description": "Provide overlapping and flush slot covers for 20x20mm slot6 construction profiles", - "printer_compatibility": "V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "chri.kai.in/Angry_CAM_USB", "title": "Angry CAM USB", "creator": "chri.kai.in", "description": "Housing for small USB camera module, allowing mounting to gantry or frame profiles", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "chri.kai.in/Exhaust_Adapter_100mm", "title": "Exhaust Adapter 100mm", "creator": "chri.kai.in", "description": "Replace 60mm exhaust fan with 100mm ventilation system adapter", - "printer_compatibility": "V1.8, V2.4, VT", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "chrisrgonzales/270_degree_hinge", "title": "270\u00b0 Front Panel Hinge", "creator": "chrisrgonzales", "description": "Hinges that have 270\u00b0 of swivel, parametric CAD included", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "christophmueller/Phaetus_Dragonfly_BMO_Afterburner", "title": "Phaetus and Zodiac Dragonfly BMO Afterburner toolheads", "creator": "christophmueller", "description": "Covers both the original Phaetus variant as well as the Zodiac one.", - "printer_compatibility": "V1.8, V2.4, VSW", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "claytono/2.4-extrusion-jig", "title": "Voron 2.4 Extrusion Jig", "creator": "claytono", "description": "A jig help align extrusions to get a properly square frame", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "claytono/fysetc-s6-v2-mount", "title": "Fysetc S6 V2 Mount", "creator": "claytono", "description": "DIN Mount for the Fysetc S6 V2 controller", - "printer_compatibility": "V1.8, V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "claytono/v0-zip-tie-skirts", "title": "V0 Zip Tie Skirts", "creator": "claytono", "description": "V0 skirts with small loops added along the top to allow zip tyiing cables to them", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "clee/Monster8_heatsert_mount", "title": "Monster8 DIN Rail Mounts", "creator": "clee", "description": "DIN mount for Makerbase Monster8 V1/V2 controller", - "printer_compatibility": "V2.4, VT", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "cmrny/v01_motor_panel_no_rub", "title": "V0.1 Motor Panel Modification", "creator": "cmrny", "description": "V0.1 Motor panel modification to keep umbilical and bowden tube from rubbing against motor belts", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "conqueror433/Voron_Parts_Logo", "title": "Voron Parts Logo", "creator": "conqueror433", "description": "Voron Parts Logo for your back panels, 3D Print or Laser Cut", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "conqueror433/Voron_V0.1_Parts_Logo", "title": "Voron V0.1 Parts Logo", "creator": "conqueror433", "description": "Voron Parts Logo for your V0 deck panel", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "consibonsi/Y-Mod_SW_9mm", "title": "Y-Mod SW 9mm", "creator": "consibonsi", "description": "9mm Y belt mod for SW", - "printer_compatibility": "VSW", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "csch0/SW_FanMount_No_Tape", "title": "SW Fan Mount No Tape", "creator": "csch0", "description": "60x20 Fan Mount for SW without tape", - "printer_compatibility": "VSW", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "d3nny/mains_plug_panel_for_RND_165-00057", "title": "Filtered Power Plug with RND_165-00057", "creator": "d3nny", "description": "Filtered Power Plug for RND 165-00057 and CAT6-Plug", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "dankeeling/CreativeLiveCameraMount", "title": "Creative Live! Camera Mount", "creator": "dankeeling", "description": "A mod to provide a mount for the Creative Live! Camera that mounts on 20mm extrusion.", - "printer_compatibility": "V2.4r2, VT", - "last_changed": "2023-12-30T15:53:01+00:00" + "printer_compatibility": [ + "V2.4r2", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "davidauvergne/Center_cable_management_duct", "title": "Center_cable_management_duct", "creator": "davidauvergne", "description": "Mod for a centered cable management", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "dePrintinator/HEPA_Filter_Exhaust", "title": "HEPA Exhaust", "creator": "dePrintinator", "description": "HEPA filter chamber exhaust replacement.", - "printer_compatibility": "V1.8, V2.4, VT", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "deepfriedheroin/v0_bed_wagos", "title": "v0 Wago Bed Mounts", "creator": "deepfriedheroin", "description": "Easy to install Wago mounts for the v0", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "deepfriedheroin/v0_power_wagos", "title": "v0 Power Wagos", "creator": "deepfriedheroin", "description": "Easy to install Wago mounts for v0 mains", - "printer_compatibility": "V0.2", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "deepfriedheroin/v2_bed_wagos", "title": "V2 Bed Wagos", "creator": "deepfriedheroin", "description": "Wire management for the v2 bed", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "doubletrouble/V0_Skirt_Mod", "title": "V0 Skirt Mod", "creator": "doubletrouble", "description": "V0 Skirt Mod", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "eamars/stealthburner_crazy_dragon_toolhead", "title": "Stealthburner (RC1) Dragon Volcano Hotend Toolhead Mount", "creator": "eamars", "description": "The Stealthburner toolhead mount for Mellow Crazy, TriangleLab T-Volcano and Phaetus UHF mini", - "printer_compatibility": "V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "eddie/LED_Bar_Clip", "title": "LED Bar Clip", "creator": "eddie", "description": "Modular LED Clip for mounting LED Strip to 2020 Extrusions", - "printer_compatibility": "V1.8, V2.4, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "eddie/V1.8_12mm_Z_Mod", "title": "V1.8 12mm Z Mod", "creator": "eddie", "description": "Add V1.8 option for 12mm Z rods", - "printer_compatibility": "V1.8", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V1.8" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "edwardyeeks/Tridentified_V2.4_Power_Inlet", "title": "Tridentified V2.4 Power Inlet", "creator": "edwardyeeks", "description": "Trident style side power inlet for V2.4 using Z Drive Motor Tensioner Mod - By @Amarpal89", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "elcrni/Trident_Internal_Spool_Holder", "title": "Trident Internal Spool Holder", "creator": "elcrni", "description": "Internal spool holder for 300 and 350 Tridents. Supports full size 1kg spool", - "printer_compatibility": "VT", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "elcrni/V2.4-Trident-Spool-Holders", "title": "V.24/Trident Spool Holder", "creator": "elcrni", "description": "Spool holder that mounts on top for \"too close to the wall\" printers", - "printer_compatibility": "V1.8, V2.4, VT", - "last_changed": "2023-12-21T14:04:19+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "evandepol/Crydom-GN-Guard", "title": "Crydom GN Terminal Guard", "creator": "evandepol", "description": "A simple safety guard for the terminals on a Crydom GN SSR", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "evandepol/Voron2.4-Cable-clamps", "title": "Voron 2.4 cable clamps", "creator": "evandepol", "description": "A set of 2020-mounted cable guards to organize and dress the wiring on your build", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "falo/lgx_lite_side_can", "title": "LGX Lite CAN Side Mount", "creator": "falo", "description": "A side mounting for a CAN board (Huvud/SHT42) to the LGX Lite", - "printer_compatibility": "V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "falo/magnetic_grill_cover", "title": "Magnetic Exhaust Grill Cover", "creator": "falo", "description": "A magnetic cover to seal the filtered exhaust", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "falo/toolhead_pcb_to_can", "title": "Toolhead PCB to CAN Mount Adaptor", "creator": "falo", "description": "A mount to enable side mounting of a CAN board (Huvud/SHT42) in Afterburner PCB spacing", - "printer_compatibility": "V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "filotto78/6mm_slot_cover", "title": "6mm slot cover", "creator": "filotto78", "description": "Simple cover for extrusion with 6mm slot width", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "frankaf/mgn12-euclid", "title": "Euclid Probe Carriage", "creator": "frankaf", "description": "A MGN-12 carriage with an inset mount for a Euclid Probe", - "printer_compatibility": "V1.8, V2.4, VT", - "last_changed": "2023-07-17T22:40:39+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "gamebofh/door-panels", "title": "Laser cut door panels", "creator": "gamebofh", "description": "Files to allow you to create laser cut door panels with some ability to adjust", - "printer_compatibility": "VSW", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "gauravmm/crazy_mozzie_cw2", "title": "Crazy Mozzie HF toolhead SB+CW2", "creator": "gauravmm", "description": "Toolhead for Crazy Mozzie HF, compatible with Stealthburner and Clockwork 2", - "printer_compatibility": "V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "gen2eng/z_carriage_stop_pass_through", "title": "Switchwire LED wire pass through", "creator": "gen2eng", "description": "Z Carriage Stop modification that makes pass through of wires for the LED light bar clean and easy", - "printer_compatibility": "VSW", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "geoffreyyoung/dual_rail_guide", "title": "Dual Rail Installation Guide", "creator": "geoffreyyoung", "description": "Rail installation guide that also works for the 2.4 dual rail installation", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "geoffreyyoung/lgx", "title": "LGX Info, Links, and Models", "creator": "geoffreyyoung", "description": "Useful information and models for using the Bondtech LGX extruder wth Afterburner", - "printer_compatibility": "V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "gerritwellen/manta-m8p-bracket", "title": "Manta M8P Mount", "creator": "gerritwellen", "description": "Mounting Bracket for BTT Manta M8P", - "printer_compatibility": "V2.4, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "golas/v0-extended-tophat-hinge", "title": "V0.1 Extended tophat hinge", "creator": "golas", "description": "Extended tophat for v0.1 with hinges (integrated or screwed ones).", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "golas/v0-trident-skirt-mix", "title": "V0.1 Trident skirt remix with 12864 LCD", "creator": "golas", "description": "Trident style v0.1 skirt mix with 12864 Mini Lcd on front or plain skirt.", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hartk1213/Voron0.2_2.8_WaveshareDisplay", "title": "Voron0.2 2.8 Waveshare Display", "creator": "hartk1213", "description": "2.8 Waveshare display for V0.2", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hartk1213/Voron0.2_Rear_Keystone_Skirt", "title": "Voron0.2 Rear Keystone Skirt", "creator": "hartk1213", "description": "Added keystone slot on rear skirt for V0.2", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hartk1213/Voron0_C14Inlet", "title": "Voron0 C14Inlet", "creator": "hartk1213", "description": "Added a new Power inlet that uses a Fused C14 plug and switch that covers the mains contacts", - "printer_compatibility": "V0.1", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V0.1" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hartk1213/Voron0_ExtendedLegs", "title": "Voron0 ExtendedLegs", "creator": "hartk1213", "description": "New extended legs to raise the printer up a tiny bit more", - "printer_compatibility": "V0.1", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.1" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hartk1213/Voron0_ExtrusionSkirt", "title": "Voron0 ExtrusionSkirt", "creator": "hartk1213", "description": "Created a new skirt design that uses 50mm extrusions as legs and it has a c14 power inlet hole on the bottom", - "printer_compatibility": "V0.1", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.1" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hartk1213/Voron0_Hinged_Top_Hat", "title": "Voron0 Hinged Top Hat", "creator": "hartk1213", "description": "Created a new hinged top hat design for the V0 so it can fold away when you dont want a top hat on", - "printer_compatibility": "V0.1", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.1" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hartk1213/Voron0_MGN9C_X_Axis", "title": "Voron0 MGN9C X Axis", "creator": "hartk1213", "description": "This mod, replaces the stock MGN7H for MGN9C on the V0", - "printer_compatibility": "V0.1", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.1" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hartk1213/Voron0_deck_panel_with_logo_and_VORON0", "title": "Voron0 deck panel", "creator": "hartk1213", "description": "Used @Kruppes blank deck panel to add the logo as well as the name VORON0", - "printer_compatibility": "V0.1", - "last_changed": "2023-10-24T11:32:29+00:00" + "printer_compatibility": [ + "V0.1" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hartk1213/Voron0_display_dualcolor", "title": "Voron0 display dualcolor", "creator": "hartk1213", "description": "Added a dual color file for the Voron Display Front housing", - "printer_compatibility": "V0.1", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.1" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hartk1213/Voron2.4_GE5C", "title": "Voron2.4 GE5C", "creator": "hartk1213", "description": "This mod replaces the stack of printed z joints with a metal spherical bearing", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hartk1213/Voron2.4_SexBolt_ZEndstop", "title": "Voron2.4 SexBolt ZEndstop", "creator": "hartk1213", "description": "This mod replaces stock V2 Z endstop with a different style", - "printer_compatibility": "V2.4, VT", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hartk1213/Voron2.4_Trident_Pins_Mod", "title": "Voron2.4 and Trident Pins Mod", "creator": "hartk1213", "description": "This mod replaces all the M5 screws for all idlers/pulleys/bearings with 5mm pins", - "printer_compatibility": "V2.4, VT", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hartk1213/Voron2.4_Y_Endstop_Relocation", "title": "Voron2.4 Y Endstop Relocation", "creator": "hartk1213", "description": "This mod relocates the Y endstop to the top A drive piece", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "henrikssn/parametric_spool_holder", "title": "Parametric Spool Holder", "creator": "henrikssn", "description": "Spool holder where the length is a parameter.", - "printer_compatibility": "V1.8, V2.4, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "henrikssn/plug_panel_generic", "title": "Plug Panel Mod for Generic Unfiltered Modules", "creator": "henrikssn", "description": "v2.4 plug panel for generic unfiltered modules with 66mm x 27mm cutout such as the Delta 06A2 and Qualtek 761-18", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hergtoler/exhaust_120mm_duct", "title": "Exhaust Housing for 120mm Fan and 4in Duct", "creator": "hergtoler", "description": "v2.4 Exhaust Housing for 120mm Fan and 4in Duct", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hernsl/bottom_panel_mag_clip", "title": "Bottom Panel Mag Clip", "creator": "hernsl", "description": "v2.4 magnetic clips to retain bottom panel", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hhammarstrand/afterburner_connector_cover_42STH20-1004AS", "title": "Afterburner connector cover for 42STH20-1004AS", "creator": "hhammarstrand", "description": "Connector cover for 42STH20-1004AS", - "printer_compatibility": "VSW", - "last_changed": "2023-10-24T11:32:29+00:00" + "printer_compatibility": [ + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hijax_pl/corner_panel_clip", "title": "Corner panel clip", "creator": "hijax_pl", "description": "V2 panel corner frames using 3-way L brackets in the corners", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hijax_pl/din_rail_mount", "title": "Din Rail mount", "creator": "hijax_pl", "description": "Adapter to attach DIN Rail to 2020 extrusion.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hijax_pl/ender_compatible_controller_mount", "title": "Controler Board adapters", "creator": "hijax_pl", "description": "DIN (rotated) and legacy adapters for boards like SKR mini E3.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hoschi/FYSETC_Spider_DIN_Mount", "title": "FYSETC Spider DIN Rail Mount", "creator": "hoschi", "description": "DIN rail mount for FYSETC Spider", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hymness1/10x11mm_chain_VSW", "title": "10x11mm chain VSW", "creator": "hymness1", "description": "Printable and openable 10x11mm chain", - "printer_compatibility": "V0.2, VSW", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2", + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "hymness1/Quickdraw_probe_Voron_Switchwire", "title": "Quickdraw probe Voron Switchwire", "creator": "hymness1", "description": "Detachable magnetic probe with docking system for VSW", - "printer_compatibility": "VSW", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "iblue/TophatExtractor", "title": "V0.1 Tophat Extractor", "creator": "iblue", "description": "Tophat Extractor for the Voron V0.1 with activated charcoal and HEPA filter", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "jangrewe/Bitter_USB_Cam", "title": "Bitter USB Cam", "creator": "jangrewe", "description": "Modification of the \"Angry Cam USB v2.0\" webcam mount for 1515 extrusions", - "printer_compatibility": "V0", - "last_changed": "2023-10-24T08:41:48+00:00" + "printer_compatibility": [ + "V0" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "jappaj/FanSaver", "title": "V0.1 FanSaver", "creator": "jappaj", "description": "A printable fix for overheating V0.1 blower fans", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "jasonc/Z_Idler_Shoulder_Bolt", "title": "V2.4 Z-Idler Shoulder Bolt Mod", "creator": "jasonc", "description": "Modification to the idler carriers to accept a 25mm shoulder bolt. Ideal for Gates idlers.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "jatson/plug_panel_schurter", "title": "Plug panel mod for Schurter CD44.1101.151 power entry", "creator": "jatson", "description": "A modified plug panel for Voron 2.4r1 with Schurter CD44.1101.151 power entry modul. The panel has a LAN socket as well.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "jaysuk/4.3_fly_screen_mount", "title": "4.3 Fly Screen Mount", "creator": "jaysuk", "description": "A mount for a 4.3\" Fly Screen", - "printer_compatibility": "V0, V0.1", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0", + "V0.1" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "jeoje/4.3_Inch_Touchscreen_Mount", "title": "4.3\" Touchscreen Mount", "creator": "jeoje", "description": "Mounts a [Waveshare 4.3inch Capacitive Touch Display](https://www.waveshare.com/4.3inch-dsi-lcd.htm) to v2.4 and Switchwire Vorons", - "printer_compatibility": "V2.4, VSW", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4", + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "jeoje/Molex_MLX_Microfit_Bed_Connector_Mount", "title": "Molex MLX and Microfit 3.0 Bed Connector Mount", "creator": "jeoje", "description": "Solid mount your bed connectors", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "jeoje/Sturdy_Handles", "title": "Sturdy Handles", "creator": "jeoje", "description": "Modified v2.2 handles with no panel rest and with 4 anchor points", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "jeoje/Z_Chain_Guide_Thermistor_Mount", "title": "V2.4 Z Chain Guide with Integrated Chamber Thermistor Mount", "creator": "jeoje", "description": "Modifies the Z chain guide to hold a chamber thermistor", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "jgehrig/v0_lcdskirt", "title": "V0 LCD Touchscreen Skirt", "creator": "jgehrig", "description": "3.2\" LCD Touch Screen Skirt", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "johanncc/Raspberry_Pi_Camera_Mount", "title": "Raspberry Pi Camera Mount", "creator": "johanncc", "description": "Low profile raspberry pi camera mount", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "joposter/v0_clippable_ledmounts", "title": "V0 Clippable LED Caselight", "creator": "joposter", "description": "LED Case light for the V0 that clips into the extrusions", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "khay/V2-200_4020_Electronics_Fan", "title": "Fan for V2-200mm\u00b2", "creator": "khay", "description": "Middle Skirt for V2-200mm\u00b2 Electronics Compartment", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "khay/V2_3x_Keystone_Plugpanel", "title": "3x Keystone PlugPanel", "creator": "khay", "description": "PlugPanel with Options for 3 Keystones", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "khay/micro_backplate", "title": "V0 Micro Backplate", "creator": "khay", "description": "Minimalistic backplate for cooler motors and electronics", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "kirby/v0_sherpa_mini_direct_drive", "title": "V0 Sherpa Mini Direct Drive Mod", "creator": "kirby", "description": "A direct drive mod for the V0 using the Annex Sherpa Mini extruder", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "lakai/Bruag_Skirts", "title": "Bruag Skirts", "creator": "lakai", "description": "V2 350mm skirts inspired by Bruag Facades", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "leandromarceddu/PowerSkirt", "title": "PowerSkirt", "creator": "leandromarceddu", "description": "Modified skirtpiece for a digital power monitor", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "littleferris/V0_Skirt_Inlet", "title": "V0 c14 Skirt Inlet", "creator": "littleferris", "description": "V0 C14 Skirt inlet", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "madfabrications/Vertical_PSU_Mount", "title": "Vertical PSU Mount", "creator": "madfabrications", "description": "Mounts the PSU vertically on the DIN rails", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "madros/V0_skirt_OLED", "title": "V0 OLED-skirt", "creator": "madros", "description": "V0 skirt with 0.96\" OLED", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "maximilian-foerg/AB_Turbo_Mod", "title": "Afterburner Turbo Mod", "creator": "maximilian-foerg", "description": "A purely cosmetic mod for Afterburner", - "printer_compatibility": "V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "maximilian-foerg/VSW_Double_60mm_Fan_Mount", "title": "Switchwire Double 60mm Fan Mount", "creator": "maximilian-foerg", "description": "A mount for two (or four) 60mm fans in SW's electronics compartment", - "printer_compatibility": "VSW", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "mikepthomas/MKS_Mosfet_Mount", "title": "MKS Mosfet Mount", "creator": "mikepthomas", "description": "MKS Mosfet Mount based of the Trident Raspberry Pi Mount.", - "printer_compatibility": "V1.8, V2.4, VT", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "mjoaris/10x11_Cable_Chain_Endcaps", "title": "10x11 Cable Chain Endcaps", "creator": "mjoaris", "description": "Printable Endcaps for 10x11 Cable Chains", - "printer_compatibility": "V1.8, V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "mjoaris/Mini12864_LCD_Mount_for_V2.4", "title": "Mini12864 LCD Mount", "creator": "mjoaris", "description": "Swiveling case for the Fysetc Mini12864 LCD", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "mosher/m3_door_hinges", "title": "Door hinges with M3 screws shafts", "creator": "mosher", "description": "Simple mod of print in place door hinges, which uses m3 screws as shafts.", - "printer_compatibility": "V2.4", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "mpfl/V0.1_skirt_OLED", "title": "V0.1 OLED-skirt", "creator": "mpfl", "description": "V0.1 skirt with 0.96\" OLED", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "muradir/Zodiac_BMO_Stealthburner_Toolhead", "title": "Zodiac BMO Stealthburner Toolhead", "creator": "muradir", "description": "A Stealthburner toolhead for the Zodiac BMO Hotend, based on the Phaetus BMO toolhead.", - "printer_compatibility": "V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "natewalck/v1.8_Jigs", "title": "V1.8 Jigs", "creator": "natewalck", "description": "Jigs for assembling V1.8", - "printer_compatibility": "V1.8", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "nhchiu/V0.1_Movable_Pulley_Z", "title": "V0.1 Movable Pulley Z Drive", "creator": "nhchiu", "description": "A movable pulley system on the Z axis with 1:8 total speed ratio for V0.1", - "printer_compatibility": "V0.1", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.1" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "nikolasbabetas/Neopixel_Holder", "title": "Neopixel Holder ", "creator": "nikolasbabetas", "description": "A holder to attach Neopixel/WS2812B Led Strips to the V0.1", - "printer_compatibility": "V0.1", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.1" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "ommy/roller_brackets", "title": "roller brackets", "creator": "ommy", "description": "Brackets to help rolling V2 on its side.", - "printer_compatibility": "V2.4", - "last_changed": "2023-11-13T15:23:59+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "oxno/rbp_zero_braket", "title": "RBP Zero Bracket", "creator": "oxno", "description": "Bracket for Raspberry pi zero.", - "printer_compatibility": "V1.8, V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "padok/chain_anchor-ADXL345_mount", "title": "Chain Anchor - ADXL345 mount Mod", "creator": "padok", "description": "A ADXL345 mount for the Afterburner", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "piet206/V1.8._Z_Rails_Mod", "title": "V1.8 Z Rails Mod", "creator": "piet206", "description": "Add MGN12H linear rails for Z axis motion", - "printer_compatibility": "V1.8", - "last_changed": "2023-10-24T11:32:29+00:00" + "printer_compatibility": [ + "V1.8" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "ponkotsu1/V0_Launchpad_Skirt", "title": "V0 Launchpad Skirt", "creator": "ponkotsu1", "description": "Another style V0 skirt", - "printer_compatibility": "V0", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V0" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "prasadp4009/SW_SB_CRTouch", "title": "StealthBurner CR Touch Mod", "creator": "prasadp4009", "description": "Voron SW StealthBurner CR Touch Mod", - "printer_compatibility": "VSW", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "quattroerik/front_door_m3_180_deg_3mm", "title": "V2.4 Door Hinge M3 3mm 180deg", "creator": "quattroerik", "description": "Voron 2.4 door hinges for 3mm panel, 180 deg opening and m3 screw as shaft", - "printer_compatibility": "V2.4, VT", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "randell/Door_Hinges", "title": "Door Hinges", "creator": "randell", "description": "Door hinges that use an M3 bolt for a pin and bolts thru the panel", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "randell/Microswitch_Endstop", "title": "Microswitch Pod for PCB", "creator": "randell", "description": "Modified endstop pod for use of endstop switches mounted on a PCB", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "raymondh/LargeSpoolHolders", "title": "Large Spool Holders", "creator": "raymondh", "description": "Larger spool holders for KVP spools", - "printer_compatibility": "V1.8, V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "reQu1em00/Kirigami_LED_Bed_Front", "title": "Kirigami LED Bed Front", "creator": "reQu1em00", "description": "Kirigami bed front with space for a single LED or Neopixel button", - "printer_compatibility": "V0.2", - "last_changed": "2023-10-24T11:32:29+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "reapola/MKS_CANable_Pro_mount", "title": "MKS CANable Pro DIN Mount", "creator": "reapola", "description": "MKS CANable Pro mount which mounts on a DIN rail", - "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.2", + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "revnull/rpi_7in_display_mount", "title": "Raspberry Pi 7inch Display Mount", "creator": "revnull", "description": "An articulating mount for the offical Raspberry Pi 7inch touch screen", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "richardjm/adxl-chain", "title": "ADXL drag chain mount", "creator": "richardjm", "description": "Permanent mount for ADXL boards on the back of the motor, replacing the drag chain mount.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "richardjm/back-plate", "title": "Back blanking plate", "creator": "richardjm", "description": "Back blanking plate that can be used instead of the exhaust filter housing if you are using something like a nevermore filter instead.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "richardjm/led-mounts", "title": "LED 15.5mm quarter round mounts", "creator": "richardjm", "description": "Mounting corners with integrated cable runs for 15.5mm quarter round aluminium led extrusions.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "richardjm/picam-corner", "title": "Picam corner mount", "creator": "richardjm", "description": "Out of the way corner mounted picam", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "richardjm/snap-latch-2020", "title": "Printable snap latches for 2020 extrusion", "creator": "richardjm", "description": "Quick release panel latch inspired by the work of others.", - "printer_compatibility": "V2.4", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "rngSplat/SW_Deck_Plate", "title": "Printable Switchwire Deck Plate", "creator": "rngSplat", "description": "Print a deck plate for Switchwire with debossed Voron logo", - "printer_compatibility": "VSW", - "last_changed": "2023-10-24T11:32:29+00:00" + "printer_compatibility": [ + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "roboticator24/4inch_touchscreen_mount_for_v2.4", "title": "Touchscreen for OctoDash", "creator": "roboticator24", "description": "Mount a 4-inch LCD touchscreen to your V2.4 in place of the usual 12864 panel to allow you to run the amazing OctoDash touch UI", - "printer_compatibility": "V2.4", - "last_changed": "2023-10-24T11:32:29+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "rsheng118/BTT_octopus_DIN_vertical_mount", "title": "BTT octopus DIN vertical mount", "creator": "rsheng118", "description": "DIN vertical mount for Big Tech Tree Octopus board", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "ruiqimao/V0.2_MGN9C_X", "title": "V0.2 MGN9C X Axis", "creator": "ruiqimao", "description": "MGN9C linear rail for the X axis on V0.2", - "printer_compatibility": "V0", - "last_changed": "2023-10-26T04:44:49+00:00" + "printer_compatibility": [ + "V0" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "ryandam/Cable_management_duct", "title": "Cable Management Duct", "creator": "ryandam", "description": "Zip tie mount intergrated cable duct to hide your cable", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "sammynorway/LGX-stealthburner-connector-cover", "title": "LGX stealthburner connector cover", "creator": "sammynorway", "description": "Cable cover for LGX and stealthburner", - "printer_compatibility": "V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "samwiseg0/4channel_relay_under_deck_mount", "title": "4 Channel Relay Under Deck Mount", "creator": "samwiseg0", "description": "Mod to mount a 4 channel GPIO controlled relay", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "samwiseg0/ab_plug_microfit_1x4", "title": "AB Plug (Microfit 1x4)", "creator": "samwiseg0", "description": "Mod to mount A & B motor connectors to the gantry", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "samwiseg0/corner_cable_hide", "title": "Corner Cable Hide/Cover (LED Wires)", "creator": "samwiseg0", "description": "Mod to hide cables around z idlers", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "samwiseg0/esp8266_nodemcu_din_mount", "title": "ESP8266 NodeMCU Din Mount", "creator": "samwiseg0", "description": "Din mount for ESP8266 NodeMCU", - "printer_compatibility": "V2.4, VT", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "samwiseg0/extrusion_thermistor_mount", "title": "Extrusion/Chamber Thermistor Mount", "creator": "samwiseg0", "description": "Extrusion mount for a NTC100K Thermistor extrusion", - "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2", + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "samwiseg0/lrs_screw_terminal_cover", "title": "LRS PSU Screw Terminal Cover", "creator": "samwiseg0", "description": "Mod to cover the screw terminals for several LRS style PSUs", - "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", - "last_changed": "2023-10-24T08:48:08+00:00" + "printer_compatibility": [ + "V0.2", + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "samwiseg0/microfit_2x3_skirt_connector_adxl", "title": "Microfit 2x3 Skirt Connector (ADXL)", "creator": "samwiseg0", "description": "Mod for a Microfit 2x3 connector to be mounted in a skirt", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "samwiseg0/voyager_gtx_din_mount", "title": "Corsair Flash Voyager GTX Din Mount", "creator": "samwiseg0", "description": "Din carrier for a Corsair Flash Voyager GTX", - "printer_compatibility": "V2.4, VT", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "scanlory/clip_on_door_frame", "title": "Clip-On Front Door Frame", "creator": "scanlory", "description": "Clip-on frame to stiffen and seal front door panels when using modified hinges.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "slitte/PCB_Probe", "title": "PCB_Probe", "creator": "slitte", "description": "PCB for BAT85 and pull up resistor", - "printer_compatibility": "V2.4, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "slitte/ssd_bracket", "title": "ssd_bracket", "creator": "slitte", "description": "bracket for mounting a 2.5\" ssd to a din rail", - "printer_compatibility": "V2.4, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "sloscotty/SW_Wall_Plate", "title": "Switchwire Wall Plate", "creator": "sloscotty", "description": "SW plate for enclosure", - "printer_compatibility": "VSW", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "sloscotty/TopHat_Cam_Extension", "title": "NoNutz TopHat Cam Extension", "creator": "sloscotty", "description": "Tophat extension with integrated webcam for V0/0.1", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "spacelab2021/Orbiter-Clockwork", "title": "Orbiter Clockwork Mount", "creator": "spacelab2021", "description": "A clockwork adaptor for the Orbiter v1.5 Extruder with full integration into the Afterburner. Includes a filament quick release lever for simple filament loading and unloading.", - "printer_compatibility": "V1.8, V2.4, VSW, VT", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW", + "VT" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "sse018/Octopus_DIN_Rail_bracket", "title": "Octopus DIN Rail bracket", "creator": "sse018", "description": "A Din rail mount for BTT Octopus board", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "strayr/stealthburner_creality_toolhead", "title": "Creality toolhead for stealthburner", "creator": "strayr", "description": "Use a creality ender 3 style hotend with stealthburner", - "printer_compatibility": "V1.8, V2.4, VSW", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "sttts/Waveshare-5.5-inch-HDMI-AMOLED", "title": "Waveshare 5.5inch HDMI AMOLED Mount", "creator": "sttts", "description": "Mod to mount a Waveshare 5.5inch full HD display on a V2", - "printer_compatibility": "V2.4, VSW", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4", + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "tallman5/z-locks", "title": "Z Locks", "creator": "tallman5", "description": "Helping hands curing v2.4 build, replaces long zip ties.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "tameike/DIN_Rail_2020_holder", "title": "Din Rail 2020 Holder", "creator": "tameike", "description": "Attaching DIN Rails to 2020", - "printer_compatibility": "V2.4", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "tameike/DIN_Rail_SKR_1.3_90deg", "title": "Din Rail SKR 90 deg", "creator": "tameike", "description": "SKR V1.3 bracket turned 90 degrees", - "printer_compatibility": "V2.4", - "last_changed": "2023-10-24T11:32:29+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "tameike/Jetpack_V0", "title": "Jetpack V0 base", "creator": "tameike", "description": "Attach Jetpack to V0 frame", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "tameike/V0_TR_Mounting_Frame", "title": "TacoRaven Mounting Frame", "creator": "tameike", "description": "TR V0 mount", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "tayto-chip/skirt_switch_mod", "title": "V2.4 Skirt Switch Mod", "creator": "tayto-chip", "description": "Add a ON/OFF Switch to side or front skirts", - "printer_compatibility": "V2.4", - "last_changed": "2023-10-24T11:32:29+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "teookie/AB_dial_indicator_mount", "title": "AB dial indicator mount", "creator": "teookie", "description": "Mount for attaching standard dial indicators to AB", - "printer_compatibility": "V1.8, V2.4, VSW", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "teookie/skr_brace", "title": "SKR Brace", "creator": "teookie", "description": "Rigidize and stabilize SKR 1.4 mounts", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "th0mpy/beefy-din", "title": "BEEFY Din Clips", "creator": "th0mpy", "description": "Two piece BEEFY Din Clips, holds stronger", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "togi/exhaust_housing_side_fitting", "title": "Exhaust housing side fitting", "creator": "togi", "description": "Moves the exhaust housing bowden fitting 90 degrees to allow the printer to stand closer to a wall", - "printer_compatibility": "V2.4", - "last_changed": "2023-12-21T00:45:44+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "top_gun_de/mount_for_umbilical", "title": "mount_for_umbilical", "creator": "top_gun_de", "description": "Umbilical guide that goes on the chain anchor", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "warriorofwire/slenderfan", "title": "Slenderfan for Afterburner", "creator": "warriorofwire", "description": "Lighter, quieter, smaller Afterburner", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "watt-this/in-situ_linear_rail_greasing", "title": "In Situ Linear Carriage Block Lubrication", "creator": "watt-this", "description": "A modification that allow lubrication of the linear reals while fully assembled.", - "printer_compatibility": "V2.4r2", - "last_changed": "2023-12-27T16:59:01+00:00" + "printer_compatibility": [ + "V2.4r2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "whoppingpochard/extrusion_backers", "title": "Extrusion Backers", "creator": "whoppingpochard", "description": "Laser-cut metal pieces to counteract bimetallic frame warping", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "wile-e1/Deck_Panel_Support_Clips", "title": "Deck Panel Support Clips", "creator": "wile-e1", "description": "Clips to help support lower deck panels to prevent (or fix) warping:", - "printer_compatibility": "V1.8, V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "wile-e1/Stealthburner_CW1_PCB_Cover", "title": "Stealthburner + CW1 + PCB Cover", "creator": "wile-e1", "description": "Low-poly for Stealthburner + CW1 + PCB installations:", - "printer_compatibility": "V1.8, V2.4, VSW", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4", + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "wrez/astrodyne-inlet", "title": "V0 Alternate IEC 320 C14 Power Inlet Housing", "creator": "wrez", "description": "Drop in replacement for alternate-source power inlet if spec inlet is back-ordered", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xbst_/ADXL345_V0_Mount", "title": "ADXL345 V0 Mount", "creator": "xbst_", "description": "V0 Mount for a ADXL345 module", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xbst_/Bed_Hinge", "title": "Car Hood Style Bed Hinge", "creator": "xbst_", "description": "A way of reaching electronics from the top by having a \"car hood\" style hinge for the heatbed, and rotated electronics mounts.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xbst_/Duct_Mount", "title": "Duct Mount", "creator": "xbst_", "description": "100mm/4\" ducting mount for ventilation. Also supports umbilical cord and has 3 orientations for bowden adapter.", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xbst_/DuetZero", "title": "DuetZero", "creator": "xbst_", "description": "Pi Zero mount over a Duet2 for space saving", - "printer_compatibility": "V0.2, V1.8, V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2", + "V1.8", + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xbst_/Easy_Access_Rear_Panels_v0", "title": "Easy Access Rear Panels", "creator": "xbst_", "description": "New rear panels designed to expose the extruder for easy filament swapping", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xbst_/Flat_Skirts", "title": "Flat V2.4 Skirts", "creator": "xbst_", "description": "Flat V2.4 Skirts so a panel without cutouts can be used", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xbst_/HOYMK_SSR_Mount", "title": "HOYMK SSR Mount", "creator": "xbst_", "description": "Mount for Chinese HOYMK SSR", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xbst_/Hat_LED_Mount", "title": "Hat LED Mount", "creator": "xbst_", "description": "Top Hat LED module mount", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xbst_/LED_Holder", "title": "PCB LED Holder", "creator": "xbst_", "description": "Very simple mount for some (?) PCB LED Bars", - "printer_compatibility": "V1.8, V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xbst_/Max31865_DIN_Mount", "title": "DIN Mount Max31865", "creator": "xbst_", "description": "A simple DIN rail mount for the Adafruit (or SAME SIZE clone) MAX31865 PT100 Board.", - "printer_compatibility": "V1.8, V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xbst_/Omron_DIN_Mount", "title": "DIN Mount Omron Relay", "creator": "xbst_", "description": "A simple DIN rail mount for the BOM Relay", - "printer_compatibility": "V1.8, V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xbst_/Relay_DIN_Mount", "title": "DIN Mount Pi 4x Relay Board", "creator": "xbst_", "description": "A simple DIN rail mount for the 4 channel relay board for Raspberry Pi", - "printer_compatibility": "V1.8, V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V1.8", + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xbst_/V0_Electronic_Panel", "title": "V0 Electronics Cover", "creator": "xbst_", "description": "A printed cover for v0 electronics. Requires larger printer to print.", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xbst_/V0_M4_Mod", "title": "Mobius 4 (M4) V0 Mod", "creator": "xbst_", "description": "Mod to mount a M4 extruder to a Voron 0 where pocketwatch extruder mounts", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xbst_/V0_Picam", "title": "V0 PiCam Mount", "creator": "xbst_", "description": "A Raspberry Pi Camera Mount For V0", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xbst_/V0_Screw_Front_Hinge_Mod", "title": "Screwed Front Door Hinge", "creator": "xbst_", "description": "Mod to screw the front door panel (instead of VHB)", - "printer_compatibility": "V0.2", - "last_changed": "2023-10-24T11:32:29+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xbst_/V0_Skirt_Buttons", "title": "V0 Buttons & OLED Mount", "creator": "xbst_", "description": "Mod to mount custom Gcode macro buttons & Waveshare 1.3\" OLED display", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xbst_/V2.4_Fanless_Middle_Skirt", "title": "V2.4 Fanless Middle Skirt", "creator": "xbst_", "description": "A Fanless alternative middle side skirt", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xbst_/V2.4_Skirt_Buttons", "title": "V2.4 Skirt Buttons", "creator": "xbst_", "description": "Skirt mod for custom Gcode macro buttons", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xbst_/ZipClip_v0", "title": "ZipClip V0", "creator": "xbst_", "description": "Very simple ziptie mount for v0 1515 extrusions", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "xceled/Single_Panel_Magnet_Mount", "title": "Single Panel Magnet Mount", "creator": "xceled", "description": "Mount your front panel using only magnets", - "printer_compatibility": "V2.4", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V2.4" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "yenda/vsw_more_robust_belt_paths", "title": "SW More Robust XZ Belt Paths", "creator": "yenda", "description": "Small mods to belt routing components to ensure a better/more robust alignment", - "printer_compatibility": "VSW", - "last_changed": "2023-12-23T00:20:10+00:00" + "printer_compatibility": [ + "VSW" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "yeri/V0_Magnetic_Panels", "title": "V0 Magnetic Panels", "creator": "yeri", "description": "Mount V0 panels with magnets, removes need for hinges and lets you easily detach sides for access", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-13T14:30:27+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "yeri/V1_3Z", "title": "V1 3Z", "creator": "yeri", "description": "3Z mod for V1", - "printer_compatibility": "V1.8", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V1.8" + ], + "last_changed": "2024-01-08T16:38:25+00:00" }, { "path": "zruncho/V0_No_Drop_Nuts", "title": "V0 No-Drop Nuts", "creator": "zruncho", "description": "Voron0 nut inserts which auto-align (LDO frames only)", - "printer_compatibility": "V0.2", - "last_changed": "2023-07-15T11:51:22+00:00" + "printer_compatibility": [ + "V0.2" + ], + "last_changed": "2024-01-08T16:38:25+00:00" } ] \ No newline at end of file diff --git a/printer_mods/mosher/m3_door_hinges/.metadata.yml b/printer_mods/mosher/m3_door_hinges/.metadata.yml index fd1304e1a..bf54bbd4b 100644 --- a/printer_mods/mosher/m3_door_hinges/.metadata.yml +++ b/printer_mods/mosher/m3_door_hinges/.metadata.yml @@ -6,4 +6,9 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- Door_Mount_left_x2.stl +- Door_Mount_right_x2.stl +- Profile_Mount_Nut_5mm_x4.stl +- Profile_Mount_Nut_6mm_x4.stl title: Door hinges with M3 screws shafts diff --git a/printer_mods/mpfl/V0.1_skirt_OLED/.metadata.yml b/printer_mods/mpfl/V0.1_skirt_OLED/.metadata.yml index 7aa6474bf..eb38304c3 100644 --- a/printer_mods/mpfl/V0.1_skirt_OLED/.metadata.yml +++ b/printer_mods/mpfl/V0.1_skirt_OLED/.metadata.yml @@ -5,4 +5,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- v0.1-skirt-oled.stl title: V0.1 OLED-skirt diff --git a/printer_mods/muradir/Zodiac_BMO_Stealthburner_Toolhead/.metadata.yml b/printer_mods/muradir/Zodiac_BMO_Stealthburner_Toolhead/.metadata.yml index 67bc2bf17..94ce33d28 100644 --- a/printer_mods/muradir/Zodiac_BMO_Stealthburner_Toolhead/.metadata.yml +++ b/printer_mods/muradir/Zodiac_BMO_Stealthburner_Toolhead/.metadata.yml @@ -10,4 +10,8 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STLs/stealthburner_printhead_zodiac_bmo_front.stl +- STLs/stealthburner_printhead_zodiac_bmo_rear_cw1.stl +- STLs/stealthburner_printhead_zodiac_bmo_rear_cw2.stl title: Zodiac BMO Stealthburner Toolhead diff --git a/printer_mods/natewalck/v1.8_Jigs/.metadata.yml b/printer_mods/natewalck/v1.8_Jigs/.metadata.yml index 7ae15fb37..ac9caee31 100644 --- a/printer_mods/natewalck/v1.8_Jigs/.metadata.yml +++ b/printer_mods/natewalck/v1.8_Jigs/.metadata.yml @@ -5,4 +5,6 @@ images: mod_version: 1 printer_compatibility: - V1.8 +stl: +- lower_extrusion_alignment.stl title: V1.8 Jigs diff --git a/printer_mods/nhchiu/V0.1_Movable_Pulley_Z/.metadata.yml b/printer_mods/nhchiu/V0.1_Movable_Pulley_Z/.metadata.yml index 0137008ff..299a57fde 100644 --- a/printer_mods/nhchiu/V0.1_Movable_Pulley_Z/.metadata.yml +++ b/printer_mods/nhchiu/V0.1_Movable_Pulley_Z/.metadata.yml @@ -28,4 +28,14 @@ images: mod_version: 1 printer_compatibility: - V0.1 +stl: +- kirigami_adaptor/STLs/kirigami-belt-front.stl +- kirigami_adaptor/STLs/kirigami-belt-rear.stl +- STLs/80T_gear_7mm.stl +- STLs/bed_mount.stl +- STLs/end_plate.stl +- STLs/lower_belt_end_holder.stl +- STLs/motor_plate.stl +- STLs/top_idler.stl +- STLs/upper_belt_end_holder.stl title: V0.1 Movable Pulley Z Drive diff --git a/printer_mods/nikolasbabetas/Neopixel_Holder/.metadata.yml b/printer_mods/nikolasbabetas/Neopixel_Holder/.metadata.yml index 2613fc4f6..0963d6d08 100644 --- a/printer_mods/nikolasbabetas/Neopixel_Holder/.metadata.yml +++ b/printer_mods/nikolasbabetas/Neopixel_Holder/.metadata.yml @@ -14,4 +14,6 @@ images: mod_version: 1 printer_compatibility: - V0.1 +stl: +- STL/Neopixel_Holder.stl title: 'Neopixel Holder ' diff --git a/printer_mods/ommy/roller_brackets/.metadata.yml b/printer_mods/ommy/roller_brackets/.metadata.yml index fe87572c4..18ef0c396 100644 --- a/printer_mods/ommy/roller_brackets/.metadata.yml +++ b/printer_mods/ommy/roller_brackets/.metadata.yml @@ -1,6 +1,6 @@ cad: -- cad/toprest.FCStd -- cad/voronroller.FCStd +- cad/toprest.FCStd +- cad/voronroller.FCStd - cad/voronroller2.FCStd description: Brackets to help rolling V2 on its side. images: @@ -8,4 +8,8 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- rest.stl +- rollerL2.stl +- rollerR2.stl title: roller brackets diff --git a/printer_mods/oxno/rbp_zero_braket/.metadata.yml b/printer_mods/oxno/rbp_zero_braket/.metadata.yml index e317a26ee..4316bdd6f 100644 --- a/printer_mods/oxno/rbp_zero_braket/.metadata.yml +++ b/printer_mods/oxno/rbp_zero_braket/.metadata.yml @@ -7,4 +7,6 @@ mod_version: 1 printer_compatibility: - V1.8 - V2.4 +stl: +- rbp_zero_bracket.stl title: RBP Zero Bracket diff --git a/printer_mods/padok/chain_anchor-ADXL345_mount/.metadata.yml b/printer_mods/padok/chain_anchor-ADXL345_mount/.metadata.yml index 0b1869b83..f06c86a15 100644 --- a/printer_mods/padok/chain_anchor-ADXL345_mount/.metadata.yml +++ b/printer_mods/padok/chain_anchor-ADXL345_mount/.metadata.yml @@ -15,4 +15,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- stl/Chain_Anchor_-_IGUS_v9.stl title: Chain Anchor - ADXL345 mount Mod diff --git a/printer_mods/piet206/V1.8._Z_Rails_Mod/.metadata.yml b/printer_mods/piet206/V1.8._Z_Rails_Mod/.metadata.yml index 249f7d998..d71fc62fa 100644 --- a/printer_mods/piet206/V1.8._Z_Rails_Mod/.metadata.yml +++ b/printer_mods/piet206/V1.8._Z_Rails_Mod/.metadata.yml @@ -8,4 +8,8 @@ images: mod_version: 1 printer_compatibility: - V1.8 +stl: +- stl/250LeadScrewBlock.stl +- stl/300LeadScrewBlock.stl +- stl/ZMotorMount.stl title: V1.8 Z Rails Mod diff --git a/printer_mods/ponkotsu1/V0_Launchpad_Skirt/.metadata.yml b/printer_mods/ponkotsu1/V0_Launchpad_Skirt/.metadata.yml index 54a465e3a..485719b8c 100644 --- a/printer_mods/ponkotsu1/V0_Launchpad_Skirt/.metadata.yml +++ b/printer_mods/ponkotsu1/V0_Launchpad_Skirt/.metadata.yml @@ -1,4 +1,4 @@ -cad: +cad: - CAD/Launchpad_skirt.step description: Another style V0 skirt images: @@ -7,4 +7,76 @@ images: mod_version: 1 printer_compatibility: - V0 +stl: +- STL/Center_Display/back_left_foot_bottom.stl +- STL/Center_Display/back_right_foot.stl +- STL/Center_Display/foot_bottom_x3.stl +- STL/Center_Display/front_center_skirt.stl +- STL/Center_Display/front_foot_x2.stl +- STL/Center_Display/front_left_skirt.stl +- STL/Center_Display/front_right_skirt.stl +- STL/Center_Display/[a]_back_brace.stl +- STL/Center_Display/[a]_front_left_brace.stl +- STL/Center_Display/[a]_front_right_brace.stl +- STL/Center_Display/Divided_skirts/back_skirt.stl +- STL/Center_Display/Divided_skirts/inlet_foot.stl +- STL/Center_Display/Divided_skirts/skirt1_x2.stl +- STL/Center_Display/Divided_skirts/skirt2_x2.stl +- STL/Center_Display/Divided_skirts/[a]_brace1_x2.stl +- STL/Center_Display/Divided_skirts/[a]_brace2_x2.stl +- STL/Center_Display/Undivided_skirts/undivided_back_skirt.stl +- STL/Center_Display/Undivided_skirts/undivided_skirt_x2.stl +- STL/Center_Display/Undivided_skirts/[a]_undivided_brace_x2.stl +- STL/Left_Display/back_left_foot_bottom.stl +- STL/Left_Display/back_right_foot.stl +- STL/Left_Display/foot_bottom_x2.stl +- STL/Left_Display/front_foot.stl +- STL/Left_Display/front_left_foot.stl +- STL/Left_Display/front_left_foot_bottom.stl +- STL/Left_Display/front_left_skirt.stl +- STL/Left_Display/front_right_skirt.stl +- STL/Left_Display/[a]_back_brace.stl +- STL/Left_Display/[a]_front_brace.stl +- STL/Left_Display/Divided_skirts/back_skirt.stl +- STL/Left_Display/Divided_skirts/inlet_foot.stl +- STL/Left_Display/Divided_skirts/skirt1_x2.stl +- STL/Left_Display/Divided_skirts/skirt2_x2.stl +- STL/Left_Display/Divided_skirts/[a]_brace1_x2.stl +- STL/Left_Display/Divided_skirts/[a]_brace2_x2.stl +- STL/Left_Display/Undivided_skirts/undivided_back_skirt.stl +- STL/Left_Display/Undivided_skirts/undivided_skirt_x2.stl +- STL/Left_Display/Undivided_skirts/[a]_undivided_brace_x2.stl +- STL/No_Display/back_left_foot_bottom.stl +- STL/No_Display/back_right_foot.stl +- STL/No_Display/foot_bottom_x3.stl +- STL/No_Display/front_foot_x2.stl +- STL/No_Display/[a]_back_brace.stl +- STL/No_Display/Divided_skirts/back_skirt.stl +- STL/No_Display/Divided_skirts/inlet_foot.stl +- STL/No_Display/Divided_skirts/skirt1_x3.stl +- STL/No_Display/Divided_skirts/skirt2_x3.stl +- STL/No_Display/Divided_skirts/[a]_brace1_x3.stl +- STL/No_Display/Divided_skirts/[a]_brace2_x3.stl +- STL/No_Display/Undivided_skirts/undivided_back_skirt.stl +- STL/No_Display/Undivided_skirts/undivided_skirt_x3.stl +- STL/No_Display/Undivided_skirts/[a]_undivided_brace_x3.stl +- STL/Right_Display/back_left_foot_bottom.stl +- STL/Right_Display/back_right_foot.stl +- STL/Right_Display/foot_bottom_x2.stl +- STL/Right_Display/front_foot.stl +- STL/Right_Display/front_left_skirt.stl +- STL/Right_Display/front_right_foot.stl +- STL/Right_Display/front_right_foot_bottm.stl +- STL/Right_Display/front_right_skirt.stl +- STL/Right_Display/[a]_back_brace.stl +- STL/Right_Display/[a]_front_brace.stl +- STL/Right_Display/Divided_skirts/back_skirt.stl +- STL/Right_Display/Divided_skirts/inlet_foot.stl +- STL/Right_Display/Divided_skirts/skirt1_x2.stl +- STL/Right_Display/Divided_skirts/skirt2_x2.stl +- STL/Right_Display/Divided_skirts/[a]_brace1_x2.stl +- STL/Right_Display/Divided_skirts/[a]_brace2_x2.stl +- STL/Right_Display/Undivided_skirts/undivided_back_skirt.stl +- STL/Right_Display/Undivided_skirts/undivided_skirt_x2.stl +- STL/Right_Display/Undivided_skirts/[a]_undivided_brace_x2.stl title: V0 Launchpad Skirt diff --git a/printer_mods/prasadp4009/SW_SB_CRTouch/.metadata.yml b/printer_mods/prasadp4009/SW_SB_CRTouch/.metadata.yml index 749928edc..f7614efe5 100644 --- a/printer_mods/prasadp4009/SW_SB_CRTouch/.metadata.yml +++ b/printer_mods/prasadp4009/SW_SB_CRTouch/.metadata.yml @@ -7,4 +7,7 @@ images: mod_version: 1 printer_compatibility: - VSW +stl: +- stl/x_frame_SW_left.stl +- stl/x_frame_SW_right.stl title: StealthBurner CR Touch Mod diff --git a/printer_mods/quattroerik/front_door_m3_180_deg_3mm/.metadata.yml b/printer_mods/quattroerik/front_door_m3_180_deg_3mm/.metadata.yml index 17963d8e4..c1c2af19a 100644 --- a/printer_mods/quattroerik/front_door_m3_180_deg_3mm/.metadata.yml +++ b/printer_mods/quattroerik/front_door_m3_180_deg_3mm/.metadata.yml @@ -9,4 +9,9 @@ mod_version: 1 printer_compatibility: - V2.4 - VT +stl: +- hinge_left_x2.stl +- hinge_mount_x4.stl +- hinge_right_x2.stl +- latch_x2.stl title: V2.4 Door Hinge M3 3mm 180deg diff --git a/printer_mods/randell/Door_Hinges/.metadata.yml b/printer_mods/randell/Door_Hinges/.metadata.yml index 1fbd3b794..6255f676c 100644 --- a/printer_mods/randell/Door_Hinges/.metadata.yml +++ b/printer_mods/randell/Door_Hinges/.metadata.yml @@ -18,4 +18,15 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- door_handle_a_x2.stl +- door_handle_b_x2.stl +- door_latch_x2.stl +- drill_guide_handle_a.stl +- drill_guide_handle_b.stl +- drill_guide_hinge.stl +- hinge_arm_a_x2.stl +- hinge_arm_b_x2.stl +- hinge_backplate_x4.stl +- hinge_pivot_x4.stl title: Door Hinges diff --git a/printer_mods/randell/Microswitch_Endstop/.metadata.yml b/printer_mods/randell/Microswitch_Endstop/.metadata.yml index 91b6155f2..20e83c7ed 100644 --- a/printer_mods/randell/Microswitch_Endstop/.metadata.yml +++ b/printer_mods/randell/Microswitch_Endstop/.metadata.yml @@ -8,4 +8,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- Microswitch_Edge_Pod.stl title: Microswitch Pod for PCB diff --git a/printer_mods/raymondh/LargeSpoolHolders/.metadata.yml b/printer_mods/raymondh/LargeSpoolHolders/.metadata.yml index 3250ba530..4ea52ef8f 100644 --- a/printer_mods/raymondh/LargeSpoolHolders/.metadata.yml +++ b/printer_mods/raymondh/LargeSpoolHolders/.metadata.yml @@ -6,4 +6,6 @@ mod_version: 1 printer_compatibility: - V1.8 - V2.4 +stl: +- KVP5lb_holder.stl title: Large Spool Holders diff --git a/printer_mods/reQu1em00/Kirigami_LED_Bed_Front/.metadata.yml b/printer_mods/reQu1em00/Kirigami_LED_Bed_Front/.metadata.yml index 527719f06..1926c5792 100644 --- a/printer_mods/reQu1em00/Kirigami_LED_Bed_Front/.metadata.yml +++ b/printer_mods/reQu1em00/Kirigami_LED_Bed_Front/.metadata.yml @@ -6,4 +6,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Kirigami_Bed_LED_Diffuser_.stl +- Kirigami_Bed_LED_Front.stl title: Kirigami LED Bed Front diff --git a/printer_mods/reapola/MKS_CANable_Pro_mount/.metadata.yml b/printer_mods/reapola/MKS_CANable_Pro_mount/.metadata.yml index b30154f80..1df084561 100644 --- a/printer_mods/reapola/MKS_CANable_Pro_mount/.metadata.yml +++ b/printer_mods/reapola/MKS_CANable_Pro_mount/.metadata.yml @@ -15,4 +15,8 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STLs/canable_pro_clip.stl +- STLs/canable_pro_mount.stl +- STLs/pcb_din_clip.stl title: MKS CANable Pro DIN Mount diff --git a/printer_mods/revnull/rpi_7in_display_mount/.metadata.yml b/printer_mods/revnull/rpi_7in_display_mount/.metadata.yml index 385348de2..4bdc79e58 100644 --- a/printer_mods/revnull/rpi_7in_display_mount/.metadata.yml +++ b/printer_mods/revnull/rpi_7in_display_mount/.metadata.yml @@ -12,4 +12,11 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/swing_arm_lg_a.stl +- STL/swing_arm_lg_b.stl +- STL/swing_arm_sm_x2.stl +- STL/voron_2.4_7in_pi_base.stl +- STL/voron_2.4_lcd_mount_foot_a.stl +- STL/voron_2.4_lcd_mount_foot_b.stl title: Raspberry Pi 7inch Display Mount diff --git a/printer_mods/richardjm/adxl-chain/.metadata.yml b/printer_mods/richardjm/adxl-chain/.metadata.yml index d4a90d3a0..43b2202c6 100644 --- a/printer_mods/richardjm/adxl-chain/.metadata.yml +++ b/printer_mods/richardjm/adxl-chain/.metadata.yml @@ -11,4 +11,9 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/ChainAnchor-Generic-ADXL345-Adafruit.stl +- STL/ChainAnchor-Generic-ADXL345-GY-291.stl +- STL/ChainAnchor-IGUS-ADXL345-Adafruit.stl +- STL/ChainAnchor-IGUS-ADXL345-GY-291.stl title: ADXL drag chain mount diff --git a/printer_mods/richardjm/back-plate/.metadata.yml b/printer_mods/richardjm/back-plate/.metadata.yml index 2b280ac5e..47dd3bee4 100644 --- a/printer_mods/richardjm/back-plate/.metadata.yml +++ b/printer_mods/richardjm/back-plate/.metadata.yml @@ -10,4 +10,21 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/Exhaust-Grill-L.stl +- STL/Exhaust-Grill-R.stl +- STL/[a]-VoronBlankingBackPlate-L-10mm.stl +- STL/[a]-VoronBlankingBackPlate-L-4mm.stl +- STL/[a]-VoronBlankingBackPlate-L-5mm.stl +- STL/[a]-VoronBlankingBackPlate-L-6mm.stl +- STL/[a]-VoronBlankingBackPlate-L-7mm.stl +- STL/[a]-VoronBlankingBackPlate-L-8mm.stl +- STL/[a]-VoronBlankingBackPlate-L-9mm.stl +- STL/[a]-VoronBlankingBackPlate-R-10mm.stl +- STL/[a]-VoronBlankingBackPlate-R-4mm.stl +- STL/[a]-VoronBlankingBackPlate-R-5mm.stl +- STL/[a]-VoronBlankingBackPlate-R-6mm.stl +- STL/[a]-VoronBlankingBackPlate-R-7mm.stl +- STL/[a]-VoronBlankingBackPlate-R-8mm.stl +- STL/[a]-VoronBlankingBackPlate-R-9mm.stl title: Back blanking plate diff --git a/printer_mods/richardjm/led-mounts/.metadata.yml b/printer_mods/richardjm/led-mounts/.metadata.yml index 9a19b04be..75e48fac7 100644 --- a/printer_mods/richardjm/led-mounts/.metadata.yml +++ b/printer_mods/richardjm/led-mounts/.metadata.yml @@ -10,4 +10,8 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/LEDCorner15.5-Corner.stl +- STL/LEDCorner15.5-EndL.stl +- STL/LEDCorner15.5-EndR.stl title: LED 15.5mm quarter round mounts diff --git a/printer_mods/richardjm/picam-corner/.metadata.yml b/printer_mods/richardjm/picam-corner/.metadata.yml index ec16256dd..a2cb024c8 100644 --- a/printer_mods/richardjm/picam-corner/.metadata.yml +++ b/printer_mods/richardjm/picam-corner/.metadata.yml @@ -6,4 +6,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- VoronZPiCamMount11.stl title: Picam corner mount diff --git a/printer_mods/richardjm/snap-latch-2020/.metadata.yml b/printer_mods/richardjm/snap-latch-2020/.metadata.yml index 778fbc963..53559b469 100644 --- a/printer_mods/richardjm/snap-latch-2020/.metadata.yml +++ b/printer_mods/richardjm/snap-latch-2020/.metadata.yml @@ -10,4 +10,17 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/NewLatch-3.0mm.stl +- STL/NewLatch-3.5mm.stl +- STL/NewLatch-4.0mm.stl +- STL/NewLatch-4.5mm.stl +- STL/NewLatch-5.0mm.stl +- STL/NewLatch-5.5mm.stl +- STL/NewLatch-6.0mm.stl +- STL/NewLatch-6.5mm.stl +- STL/NewLatch-7.0mm.stl +- STL/NewLatch-7.5mm.stl +- STL/NewLatch-8.0mm.stl +- STL/NewLatch-8.5mm.stl title: Printable snap latches for 2020 extrusion diff --git a/printer_mods/rngSplat/SW_Deck_Plate/.metadata.yml b/printer_mods/rngSplat/SW_Deck_Plate/.metadata.yml index fabdcac5f..7f537c48d 100644 --- a/printer_mods/rngSplat/SW_Deck_Plate/.metadata.yml +++ b/printer_mods/rngSplat/SW_Deck_Plate/.metadata.yml @@ -5,4 +5,9 @@ images: mod_version: 1 printer_compatibility: - VSW +stl: +- __SW_Panels_v2_Left_Front_Deck.stl +- __SW_Panels_v2_Left_Rear_Deck.stl +- __SW_Panels_v2_Right_Front_Deck.stl +- __SW_Panels_v2_Right_Rear_Deck.stl title: Printable Switchwire Deck Plate diff --git a/printer_mods/roboticator24/4inch_touchscreen_mount_for_v2.4/.metadata.yml b/printer_mods/roboticator24/4inch_touchscreen_mount_for_v2.4/.metadata.yml index 2a5a13a8b..efb128253 100644 --- a/printer_mods/roboticator24/4inch_touchscreen_mount_for_v2.4/.metadata.yml +++ b/printer_mods/roboticator24/4inch_touchscreen_mount_for_v2.4/.metadata.yml @@ -13,4 +13,8 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/4-inch_lcd_display_frame_lower.stl +- STL/4-inch_lcd_display_frame_upper.stl +- STL/4-inch_lcd_display_push_button.stl title: Touchscreen for OctoDash diff --git a/printer_mods/rsheng118/BTT_octopus_DIN_vertical_mount/.metadata.yml b/printer_mods/rsheng118/BTT_octopus_DIN_vertical_mount/.metadata.yml index f44da698f..e9c493a20 100644 --- a/printer_mods/rsheng118/BTT_octopus_DIN_vertical_mount/.metadata.yml +++ b/printer_mods/rsheng118/BTT_octopus_DIN_vertical_mount/.metadata.yml @@ -7,4 +7,8 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/BTT_octopus_DIN_mount_A.stl +- STL/BTT_octopus_DIN_mount_B.stl +- STL/spacer_x4.stl title: BTT octopus DIN vertical mount diff --git a/printer_mods/ruiqimao/V0.2_MGN9C_X/.metadata.yml b/printer_mods/ruiqimao/V0.2_MGN9C_X/.metadata.yml index 9a4d5d03c..75df951db 100644 --- a/printer_mods/ruiqimao/V0.2_MGN9C_X/.metadata.yml +++ b/printer_mods/ruiqimao/V0.2_MGN9C_X/.metadata.yml @@ -1,4 +1,4 @@ -cad: +cad: - CAD/V0.2_MGN9C_X.step description: MGN9C linear rail for the X axis on V0.2 images: @@ -8,4 +8,10 @@ images: mod_version: 1 printer_compatibility: - V0 +stl: +- STLs/A_Drive_Frame_Lower_MGN9C.stl +- STLs/A_Drive_Frame_Upper_MGN9C.stl +- STLs/B_Drive_Frame_Lower_MGN9C.stl +- STLs/B_Drive_Frame_Upper_MGN9C.stl +- STLs/X_Carriage_MGN9C.stl title: V0.2 MGN9C X Axis diff --git a/printer_mods/ryandam/Cable_management_duct/.metadata.yml b/printer_mods/ryandam/Cable_management_duct/.metadata.yml index 8e19c4d4e..ced60e024 100644 --- a/printer_mods/ryandam/Cable_management_duct/.metadata.yml +++ b/printer_mods/ryandam/Cable_management_duct/.metadata.yml @@ -7,4 +7,10 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/CableDuctBody.stl +- STLs/CableDuctBody_small.stl +- STLs/CableDuctCover.stl +- STLs/CableDuctCover_nologo_small.stl +- STLs/CableDuctCover_small.stl title: Cable Management Duct diff --git a/printer_mods/sammynorway/LGX-stealthburner-connector-cover/.metadata.yml b/printer_mods/sammynorway/LGX-stealthburner-connector-cover/.metadata.yml index f2d446ef2..ad7a10fe4 100644 --- a/printer_mods/sammynorway/LGX-stealthburner-connector-cover/.metadata.yml +++ b/printer_mods/sammynorway/LGX-stealthburner-connector-cover/.metadata.yml @@ -11,4 +11,6 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STL/[a]_lgx_stealthburner_pcb_cover_set.stl title: LGX stealthburner connector cover diff --git a/printer_mods/samwiseg0/4channel_relay_under_deck_mount/.metadata.yml b/printer_mods/samwiseg0/4channel_relay_under_deck_mount/.metadata.yml index 36039187d..8278087f2 100644 --- a/printer_mods/samwiseg0/4channel_relay_under_deck_mount/.metadata.yml +++ b/printer_mods/samwiseg0/4channel_relay_under_deck_mount/.metadata.yml @@ -6,4 +6,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/4channel_relay_under_deck_mount.stl title: 4 Channel Relay Under Deck Mount diff --git a/printer_mods/samwiseg0/ab_plug_microfit_1x4/.metadata.yml b/printer_mods/samwiseg0/ab_plug_microfit_1x4/.metadata.yml index e1cf1ca47..29732cc32 100644 --- a/printer_mods/samwiseg0/ab_plug_microfit_1x4/.metadata.yml +++ b/printer_mods/samwiseg0/ab_plug_microfit_1x4/.metadata.yml @@ -8,4 +8,9 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/ab_microfit_1x4/[a]_ab_microfit_1x4_side_1.stl +- STLs/ab_microfit_1x4/[a]_ab_microfit_1x4_side_2.stl +- STLs/ab_microfit_1x4_pme/[a]_ab_microfit_1x4_pme_side_1.stl +- STLs/ab_microfit_1x4_pme/[a]_ab_microfit_1x4_pme_side_2.stl title: AB Plug (Microfit 1x4) diff --git a/printer_mods/samwiseg0/corner_cable_hide/.metadata.yml b/printer_mods/samwiseg0/corner_cable_hide/.metadata.yml index ee41972ad..0c2b8fa26 100644 --- a/printer_mods/samwiseg0/corner_cable_hide/.metadata.yml +++ b/printer_mods/samwiseg0/corner_cable_hide/.metadata.yml @@ -8,4 +8,7 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/[a]_top_corner_cable_hide_left_x2.stl +- STLs/[a]_top_corner_cable_hide_right_x2.stl title: Corner Cable Hide/Cover (LED Wires) diff --git a/printer_mods/samwiseg0/esp8266_nodemcu_din_mount/.metadata.yml b/printer_mods/samwiseg0/esp8266_nodemcu_din_mount/.metadata.yml index fda0679f8..ada989827 100644 --- a/printer_mods/samwiseg0/esp8266_nodemcu_din_mount/.metadata.yml +++ b/printer_mods/samwiseg0/esp8266_nodemcu_din_mount/.metadata.yml @@ -8,4 +8,6 @@ mod_version: 1 printer_compatibility: - V2.4 - VT +stl: +- STLs/esp8266_nodemcu_din_mount_universal.stl title: ESP8266 NodeMCU Din Mount diff --git a/printer_mods/samwiseg0/extrusion_thermistor_mount/.metadata.yml b/printer_mods/samwiseg0/extrusion_thermistor_mount/.metadata.yml index 673bbe2c9..f4e00594d 100644 --- a/printer_mods/samwiseg0/extrusion_thermistor_mount/.metadata.yml +++ b/printer_mods/samwiseg0/extrusion_thermistor_mount/.metadata.yml @@ -10,4 +10,6 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STLs/[a]_extrusion_thermistor_mount.stl title: Extrusion/Chamber Thermistor Mount diff --git a/printer_mods/samwiseg0/lrs_screw_terminal_cover/.metadata.yml b/printer_mods/samwiseg0/lrs_screw_terminal_cover/.metadata.yml index 163216972..58e6f0602 100644 --- a/printer_mods/samwiseg0/lrs_screw_terminal_cover/.metadata.yml +++ b/printer_mods/samwiseg0/lrs_screw_terminal_cover/.metadata.yml @@ -12,4 +12,8 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- STLs/lrs_150_screw_terminal_cover.stl +- STLs/lrs_200_screw_terminal_cover.stl +- STLs/lrs_50_screw_terminal_cover.stl title: LRS PSU Screw Terminal Cover diff --git a/printer_mods/samwiseg0/microfit_2x3_skirt_connector_adxl/.metadata.yml b/printer_mods/samwiseg0/microfit_2x3_skirt_connector_adxl/.metadata.yml index 5d1968276..0682afddb 100644 --- a/printer_mods/samwiseg0/microfit_2x3_skirt_connector_adxl/.metadata.yml +++ b/printer_mods/samwiseg0/microfit_2x3_skirt_connector_adxl/.metadata.yml @@ -8,4 +8,7 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/microfit_2x3_skirt_connector_adxl_lock.stl +- STLs/[a]_microfit_2x3_skirt_connector_adxl_base.stl title: Microfit 2x3 Skirt Connector (ADXL) diff --git a/printer_mods/samwiseg0/voyager_gtx_din_mount/.metadata.yml b/printer_mods/samwiseg0/voyager_gtx_din_mount/.metadata.yml index f0e57b1c5..f540b5eff 100644 --- a/printer_mods/samwiseg0/voyager_gtx_din_mount/.metadata.yml +++ b/printer_mods/samwiseg0/voyager_gtx_din_mount/.metadata.yml @@ -9,4 +9,6 @@ mod_version: 1 printer_compatibility: - V2.4 - VT +stl: +- STLs/voyager_gtx_din_mount_universal.stl title: Corsair Flash Voyager GTX Din Mount diff --git a/printer_mods/scanlory/clip_on_door_frame/.metadata.yml b/printer_mods/scanlory/clip_on_door_frame/.metadata.yml index 8fde9a35f..b65815803 100644 --- a/printer_mods/scanlory/clip_on_door_frame/.metadata.yml +++ b/printer_mods/scanlory/clip_on_door_frame/.metadata.yml @@ -11,4 +11,18 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/250mm_angle_frame_1_x2.stl +- STLs/250mm_angle_frame_2_x2.stl +- STLs/250mm_straight_frame_long_x2.stl +- STLs/250mm_straight_frame_short_x4.stl +- STLs/300mm_angle_frame_1_x2.stl +- STLs/300mm_angle_frame_2_x2.stl +- STLs/300mm_straight_frame_long_x2.stl +- STLs/300mm_straight_frame_short_x4.stl +- STLs/350mm_angle_frame_1_x2.stl +- STLs/350mm_angle_frame_2_x2.stl +- STLs/350mm_straight_frame_long_x2.stl +- STLs/350mm_straight_frame_short_x4.stl +- STLs/extended_door_latch_x2.stl title: Clip-On Front Door Frame diff --git a/printer_mods/slitte/PCB_Probe/.metadata.yml b/printer_mods/slitte/PCB_Probe/.metadata.yml index 585be0a2b..a4aa6f062 100644 --- a/printer_mods/slitte/PCB_Probe/.metadata.yml +++ b/printer_mods/slitte/PCB_Probe/.metadata.yml @@ -8,4 +8,5 @@ mod_version: 1 printer_compatibility: - V2.4 - VT +stl: [] title: PCB_Probe diff --git a/printer_mods/slitte/ssd_bracket/.metadata.yml b/printer_mods/slitte/ssd_bracket/.metadata.yml index a0a833cfe..211ab69fe 100644 --- a/printer_mods/slitte/ssd_bracket/.metadata.yml +++ b/printer_mods/slitte/ssd_bracket/.metadata.yml @@ -10,4 +10,6 @@ mod_version: 1 printer_compatibility: - V2.4 - VT +stl: +- stl/ssd_bracket.stl title: ssd_bracket diff --git a/printer_mods/sloscotty/SW_Wall_Plate/.metadata.yml b/printer_mods/sloscotty/SW_Wall_Plate/.metadata.yml index 0766dff0c..e4a53200b 100644 --- a/printer_mods/sloscotty/SW_Wall_Plate/.metadata.yml +++ b/printer_mods/sloscotty/SW_Wall_Plate/.metadata.yml @@ -9,4 +9,10 @@ images: mod_version: 1 printer_compatibility: - VSW +stl: +- STL/WITCHWIRE_base.stl +- STL/[a]_backplate_and_drillguide.stl +- STL/[a]_SW_badge.stl +- STL/[a]_Voron_badge.stl +- STL/Optional/[a]_nolcd_grill_mount.stl title: Switchwire Wall Plate diff --git a/printer_mods/sloscotty/TopHat_Cam_Extension/.metadata.yml b/printer_mods/sloscotty/TopHat_Cam_Extension/.metadata.yml index 4239fef60..3ee474694 100644 --- a/printer_mods/sloscotty/TopHat_Cam_Extension/.metadata.yml +++ b/printer_mods/sloscotty/TopHat_Cam_Extension/.metadata.yml @@ -20,4 +20,23 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/Ball_Mount.stl +- STLs/CamArm_Cover.stl +- STLs/Camera_Arm.stl +- STLs/Cam_Base.stl +- STLs/Cam_Face.stl +- STLs/Cam_Spacer.stl +- STLs/Front_Rear_Spacer_Left_x2.stl +- STLs/Front_Rear_Spacer_Right_x2.stl +- STLs/Left_Spacer_Front.stl +- STLs/Left_Spacer_Rear.stl +- STLs/Right_Spacer_Front.stl +- STLs/Right_Spacer_Rear.stl +- STLs/Optional/Front_Rear_Spacer_x2.stl +- STLs/Optional/Left_Spacer.stl +- STLs/Optional/Right_Spacer.stl +- STLs/Optional/Right_Spacer_NoCam.stl +- STLs/Optional/Right_Spacer_NoCam_Front.stl +- STLs/Optional/Right_Spacer_NoCam_Rear.stl title: NoNutz TopHat Cam Extension diff --git a/printer_mods/spacelab2021/Orbiter-Clockwork/.metadata.yml b/printer_mods/spacelab2021/Orbiter-Clockwork/.metadata.yml index 1be8cf318..a3361f313 100644 --- a/printer_mods/spacelab2021/Orbiter-Clockwork/.metadata.yml +++ b/printer_mods/spacelab2021/Orbiter-Clockwork/.metadata.yml @@ -15,4 +15,11 @@ printer_compatibility: - V2.4 - VSW - VT +stl: +- stl/Chain_Anchor-Voron_2.4.stl +- stl/Chain_Anchor_SwitchWire.stl +- stl/Clockwork_Adaptor_Back.stl +- stl/Clockwork_Adaptor_Front.stl +- stl/[a]_Connector_Cover.stl +- stl/[a]_Filament_release_lever.stl title: Orbiter Clockwork Mount diff --git a/printer_mods/sse018/Octopus_DIN_Rail_bracket/.metadata.yml b/printer_mods/sse018/Octopus_DIN_Rail_bracket/.metadata.yml index 49687250b..ffa7aff19 100644 --- a/printer_mods/sse018/Octopus_DIN_Rail_bracket/.metadata.yml +++ b/printer_mods/sse018/Octopus_DIN_Rail_bracket/.metadata.yml @@ -8,4 +8,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/Octopus_DIN_bracket_x2.stl title: Octopus DIN Rail bracket diff --git a/printer_mods/strayr/stealthburner_creality_toolhead/.metadata.yml b/printer_mods/strayr/stealthburner_creality_toolhead/.metadata.yml index 7d721ce74..f4a9bb1bd 100644 --- a/printer_mods/strayr/stealthburner_creality_toolhead/.metadata.yml +++ b/printer_mods/strayr/stealthburner_creality_toolhead/.metadata.yml @@ -17,4 +17,11 @@ printer_compatibility: - V1.8 - V2.4 - VSW +stl: +- stl/SB_C-E3_PC_TH_Front.stl +- stl/SB_C-E3_PC_TH_Rear_CW1.stl +- stl/SB_C-E3_PC_TH_Rear_CW2.stl +- stl/SB_C-E3_TH_Front.stl +- stl/SB_C-E3_TH_Rear_CW1.stl +- stl/SB_C-E3_TH_Rear_CW2.stl title: Creality toolhead for stealthburner diff --git a/printer_mods/sttts/Waveshare-5.5-inch-HDMI-AMOLED/.metadata.yml b/printer_mods/sttts/Waveshare-5.5-inch-HDMI-AMOLED/.metadata.yml index 53e56979d..a54237260 100644 --- a/printer_mods/sttts/Waveshare-5.5-inch-HDMI-AMOLED/.metadata.yml +++ b/printer_mods/sttts/Waveshare-5.5-inch-HDMI-AMOLED/.metadata.yml @@ -8,4 +8,7 @@ mod_version: 1 printer_compatibility: - V2.4 - VSW +stl: +- STLs/Voron-2.4-Mount-Generisch-v6.stl +- STLs/WaveShare-5.5-cover.stl title: Waveshare 5.5inch HDMI AMOLED Mount diff --git a/printer_mods/tallman5/z-locks/.metadata.yml b/printer_mods/tallman5/z-locks/.metadata.yml index 44fc77f46..bf6ed916c 100644 --- a/printer_mods/tallman5/z-locks/.metadata.yml +++ b/printer_mods/tallman5/z-locks/.metadata.yml @@ -8,4 +8,8 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- stls/z-locks-100.stl +- stls/z-locks-150.stl +- stls/z-locks-200.stl title: Z Locks diff --git a/printer_mods/tameike/DIN_Rail_2020_holder/.metadata.yml b/printer_mods/tameike/DIN_Rail_2020_holder/.metadata.yml index 1ebc0af28..4dc614b5a 100644 --- a/printer_mods/tameike/DIN_Rail_2020_holder/.metadata.yml +++ b/printer_mods/tameike/DIN_Rail_2020_holder/.metadata.yml @@ -5,4 +5,6 @@ images: [] mod_version: 1 printer_compatibility: - V2.4 +stl: +- DIN_rail_2020_holder.stl title: Din Rail 2020 Holder diff --git a/printer_mods/tameike/DIN_Rail_SKR_1.3_90deg/.metadata.yml b/printer_mods/tameike/DIN_Rail_SKR_1.3_90deg/.metadata.yml index c3dfdf110..91a665167 100644 --- a/printer_mods/tameike/DIN_Rail_SKR_1.3_90deg/.metadata.yml +++ b/printer_mods/tameike/DIN_Rail_SKR_1.3_90deg/.metadata.yml @@ -4,4 +4,6 @@ images: [] mod_version: 1 printer_compatibility: - V2.4 +stl: +- SKR_1.3_Bracket_90deg.stl title: Din Rail SKR 90 deg diff --git a/printer_mods/tameike/Jetpack_V0/.metadata.yml b/printer_mods/tameike/Jetpack_V0/.metadata.yml index e4c906287..8ab7da563 100644 --- a/printer_mods/tameike/Jetpack_V0/.metadata.yml +++ b/printer_mods/tameike/Jetpack_V0/.metadata.yml @@ -4,4 +4,6 @@ images: [] mod_version: 1 printer_compatibility: - V0.2 +stl: +- Jetpack_main_body_1515.stl title: Jetpack V0 base diff --git a/printer_mods/tameike/V0_TR_Mounting_Frame/.metadata.yml b/printer_mods/tameike/V0_TR_Mounting_Frame/.metadata.yml index 0df0b3973..81cb1aa56 100644 --- a/printer_mods/tameike/V0_TR_Mounting_Frame/.metadata.yml +++ b/printer_mods/tameike/V0_TR_Mounting_Frame/.metadata.yml @@ -4,4 +4,6 @@ images: [] mod_version: 1 printer_compatibility: - V0.2 +stl: +- V0_TacoRaven_Mounting_Frame.stl title: TacoRaven Mounting Frame diff --git a/printer_mods/tayto-chip/skirt_switch_mod/.metadata.yml b/printer_mods/tayto-chip/skirt_switch_mod/.metadata.yml index 69437692a..0787c3a7f 100644 --- a/printer_mods/tayto-chip/skirt_switch_mod/.metadata.yml +++ b/printer_mods/tayto-chip/skirt_switch_mod/.metadata.yml @@ -6,4 +6,17 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- 250/front_rear_skirt_a_250.stl +- 250/front_rear_skirt_b_250.stl +- 250/side_skirt_a_250.stl +- 250/side_skirt_b_250.stl +- 300/front_rear_skirt_a_300.stl +- 300/front_rear_skirt_b_300.stl +- 300/side_skirt_a_300.stl +- 300/side_skirt_b_300.stl +- 350/front_rear_skirt_a_350.stl +- 350/front_rear_skirt_b_350.stl +- 350/side_skirt_a_350.stl +- 350/side_skirt_b_350.stl title: V2.4 Skirt Switch Mod diff --git a/printer_mods/teookie/AB_dial_indicator_mount/.metadata.yml b/printer_mods/teookie/AB_dial_indicator_mount/.metadata.yml index b3a07ac3b..a76aade35 100644 --- a/printer_mods/teookie/AB_dial_indicator_mount/.metadata.yml +++ b/printer_mods/teookie/AB_dial_indicator_mount/.metadata.yml @@ -9,4 +9,6 @@ printer_compatibility: - V1.8 - V2.4 - VSW +stl: +- AB_dial_indicator_mount.stl title: AB dial indicator mount diff --git a/printer_mods/teookie/skr_brace/.metadata.yml b/printer_mods/teookie/skr_brace/.metadata.yml index 5e6036495..4be9ebb37 100644 --- a/printer_mods/teookie/skr_brace/.metadata.yml +++ b/printer_mods/teookie/skr_brace/.metadata.yml @@ -9,4 +9,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- skr_brace.stl title: SKR Brace diff --git a/printer_mods/th0mpy/beefy-din/.metadata.yml b/printer_mods/th0mpy/beefy-din/.metadata.yml index a03e1b2b4..225df4f95 100644 --- a/printer_mods/th0mpy/beefy-din/.metadata.yml +++ b/printer_mods/th0mpy/beefy-din/.metadata.yml @@ -17,4 +17,10 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- stl/BEEFY_Din(55mm).stl +- stl/BEEFY_Din(standard).stl +- stl/BEEFY_Din-PSU(50mm)-mirrored.stl +- stl/BEEFY_Din-PSU(50mm).stl +- stl/BEEFY_Din-shuttle.stl title: BEEFY Din Clips diff --git a/printer_mods/togi/exhaust_housing_side_fitting/.metadata.yml b/printer_mods/togi/exhaust_housing_side_fitting/.metadata.yml index e92d7ace9..f9486a6c9 100644 --- a/printer_mods/togi/exhaust_housing_side_fitting/.metadata.yml +++ b/printer_mods/togi/exhaust_housing_side_fitting/.metadata.yml @@ -7,4 +7,6 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- Exhast_Housing_Side_Fitting.stl title: Exhaust housing side fitting diff --git a/printer_mods/top_gun_de/mount_for_umbilical/.metadata.yml b/printer_mods/top_gun_de/mount_for_umbilical/.metadata.yml index 5a0a50842..b9c5fdae5 100644 --- a/printer_mods/top_gun_de/mount_for_umbilical/.metadata.yml +++ b/printer_mods/top_gun_de/mount_for_umbilical/.metadata.yml @@ -11,4 +11,8 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/Umbilical-guide-2-hole-Igus.stl +- STL/Umbilical-guide-3-hole.stl +- STL/Umbilical-guide-key.stl title: mount_for_umbilical diff --git a/printer_mods/warriorofwire/slenderfan/.metadata.yml b/printer_mods/warriorofwire/slenderfan/.metadata.yml index 33587c643..2da1c5d61 100644 --- a/printer_mods/warriorofwire/slenderfan/.metadata.yml +++ b/printer_mods/warriorofwire/slenderfan/.metadata.yml @@ -8,4 +8,11 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- blower_case.stl +- blower_lid.stl +- duct.stl +- hotend_fan_cover.stl +- v_5010_case.stl +- v_5010_lid.stl title: Slenderfan for Afterburner diff --git a/printer_mods/watt-this/in-situ_linear_rail_greasing/.metadata.yml b/printer_mods/watt-this/in-situ_linear_rail_greasing/.metadata.yml index 41bc06112..3bfab4512 100644 --- a/printer_mods/watt-this/in-situ_linear_rail_greasing/.metadata.yml +++ b/printer_mods/watt-this/in-situ_linear_rail_greasing/.metadata.yml @@ -1,17 +1,8 @@ -title: In Situ Linear Carriage Block Lubrication -# A short description of your mod. Try to describe your mod with 1-2 short sentences -description: A modification that allow lubrication of the linear reals while fully assembled. -# Mod version: Set this to 1 when you are submitting a new mod. When you make changes to your mod, you may increment this number -mod_version: 1 -# You may add your discord username here so people can contact you about your mod -discord_username: Jan_P -# The CAD files for your mod. Please provide them as a list. -# Note that each mod must include at least one CAD file. cad: - ./CAD/greasing_concept.step -# The image files provided with your mod. These may be instructions you use in your README.md file, or other additional pictures. -# **Note that the first image specified here will be used as cover image on mods.vorondesign.com** -# All paths are relative to this .metadata.yml file. +description: A modification that allow lubrication of the linear reals while fully + assembled. +discord_username: Jan_P images: - ./IMG/after_install.png - ./IMG/attach_syringe.png @@ -22,9 +13,8 @@ images: - ./IMG/voron-regreasing-concept.png - ./IMG/y_axis_lubrication_screw.png - ./IMG/z_axis_lubrication_screw.png -# Printer compatibility. Please specify all compatible printers as a list. The following values are accepted: -# "V0", "V0.1", "V0.2", "V0.2r1", "V1", "V1.6", "V1.8", "V1.8r1", "V2", "V2.1", "V2.2", "V2.4", "V2.4r1", "V2.4r2", "VSW", "VT", "VTr1", "VL" -# Please only specify printers that you have either tested your mod on yourself, or that someone else has tested for you. If you are unsure whether your -# mod is compatible with a certain printer, don't list it here! +mod_version: 1 printer_compatibility: - V2.4r2 +stl: [] +title: In Situ Linear Carriage Block Lubrication diff --git a/printer_mods/whoppingpochard/extrusion_backers/.metadata.yml b/printer_mods/whoppingpochard/extrusion_backers/.metadata.yml index 39682bc66..f7fd733e1 100644 --- a/printer_mods/whoppingpochard/extrusion_backers/.metadata.yml +++ b/printer_mods/whoppingpochard/extrusion_backers/.metadata.yml @@ -19,4 +19,5 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: [] title: Extrusion Backers diff --git a/printer_mods/wile-e1/Deck_Panel_Support_Clips/.metadata.yml b/printer_mods/wile-e1/Deck_Panel_Support_Clips/.metadata.yml index bc37efac5..414963788 100644 --- a/printer_mods/wile-e1/Deck_Panel_Support_Clips/.metadata.yml +++ b/printer_mods/wile-e1/Deck_Panel_Support_Clips/.metadata.yml @@ -9,4 +9,8 @@ mod_version: 1 printer_compatibility: - V1.8 - V2.4 +stl: +- wile.e-deck_panel_support_lower_4mm.stl +- wile.e-deck_panel_support_lower_adjustable(3-6mm).stl +- wile.e-deck_panel_support_upper.stl title: Deck Panel Support Clips diff --git a/printer_mods/wile-e1/Stealthburner_CW1_PCB_Cover/.metadata.yml b/printer_mods/wile-e1/Stealthburner_CW1_PCB_Cover/.metadata.yml index c7d968bd7..258e83ae6 100644 --- a/printer_mods/wile-e1/Stealthburner_CW1_PCB_Cover/.metadata.yml +++ b/printer_mods/wile-e1/Stealthburner_CW1_PCB_Cover/.metadata.yml @@ -9,4 +9,7 @@ printer_compatibility: - V1.8 - V2.4 - VSW +stl: +- sb_cw1_pcb_cover-r1.stl +- sb_cw1_pcb_cover_clip-on_mount-r1.stl title: Stealthburner + CW1 + PCB Cover diff --git a/printer_mods/wrez/astrodyne-inlet/.metadata.yml b/printer_mods/wrez/astrodyne-inlet/.metadata.yml index c3dc92820..0500569ae 100644 --- a/printer_mods/wrez/astrodyne-inlet/.metadata.yml +++ b/printer_mods/wrez/astrodyne-inlet/.metadata.yml @@ -14,4 +14,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- STLs/astrodyne-inlet.stl title: V0 Alternate IEC 320 C14 Power Inlet Housing diff --git a/printer_mods/xbst_/ADXL345_V0_Mount/.metadata.yml b/printer_mods/xbst_/ADXL345_V0_Mount/.metadata.yml index c50b33ce7..db36f4789 100644 --- a/printer_mods/xbst_/ADXL345_V0_Mount/.metadata.yml +++ b/printer_mods/xbst_/ADXL345_V0_Mount/.metadata.yml @@ -5,4 +5,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- A.stl +- B.stl title: ADXL345 V0 Mount diff --git a/printer_mods/xbst_/Bed_Hinge/.metadata.yml b/printer_mods/xbst_/Bed_Hinge/.metadata.yml index a5821290e..44df4c811 100644 --- a/printer_mods/xbst_/Bed_Hinge/.metadata.yml +++ b/printer_mods/xbst_/Bed_Hinge/.metadata.yml @@ -7,4 +7,10 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STLs/Deck_Panel_Holder.stl +- STLs/Din_Rail_Mount.stl +- STLs/Extrusion_Spacer.stl +- STLs/Front.stl +- STLs/Handle.stl title: Car Hood Style Bed Hinge diff --git a/printer_mods/xbst_/Duct_Mount/.metadata.yml b/printer_mods/xbst_/Duct_Mount/.metadata.yml index c954a0abb..e5597e0af 100644 --- a/printer_mods/xbst_/Duct_Mount/.metadata.yml +++ b/printer_mods/xbst_/Duct_Mount/.metadata.yml @@ -7,4 +7,8 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- Body2.stl +- Body3.stl +- Body4.stl title: Duct Mount diff --git a/printer_mods/xbst_/DuetZero/.metadata.yml b/printer_mods/xbst_/DuetZero/.metadata.yml index 10e079b9f..b940ab32f 100644 --- a/printer_mods/xbst_/DuetZero/.metadata.yml +++ b/printer_mods/xbst_/DuetZero/.metadata.yml @@ -7,4 +7,6 @@ printer_compatibility: - V0.2 - V1.8 - V2.4 +stl: +- DuetZero.stl title: DuetZero diff --git a/printer_mods/xbst_/Easy_Access_Rear_Panels_v0/.metadata.yml b/printer_mods/xbst_/Easy_Access_Rear_Panels_v0/.metadata.yml index 10c91792a..071e6bbb6 100644 --- a/printer_mods/xbst_/Easy_Access_Rear_Panels_v0/.metadata.yml +++ b/printer_mods/xbst_/Easy_Access_Rear_Panels_v0/.metadata.yml @@ -5,4 +5,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Bottom.stl +- Top.stl title: Easy Access Rear Panels diff --git a/printer_mods/xbst_/Flat_Skirts/.metadata.yml b/printer_mods/xbst_/Flat_Skirts/.metadata.yml index f326aa4c4..833016ca1 100644 --- a/printer_mods/xbst_/Flat_Skirts/.metadata.yml +++ b/printer_mods/xbst_/Flat_Skirts/.metadata.yml @@ -4,4 +4,7 @@ images: [] mod_version: 1 printer_compatibility: - V2.4 +stl: +- Filtered_In.stl +- Middle_Side_Skirt.stl title: Flat V2.4 Skirts diff --git a/printer_mods/xbst_/HOYMK_SSR_Mount/.metadata.yml b/printer_mods/xbst_/HOYMK_SSR_Mount/.metadata.yml index 29bc46dc3..d0aab66a2 100644 --- a/printer_mods/xbst_/HOYMK_SSR_Mount/.metadata.yml +++ b/printer_mods/xbst_/HOYMK_SSR_Mount/.metadata.yml @@ -4,4 +4,8 @@ images: [] mod_version: 1 printer_compatibility: - V0.2 +stl: +- Alternative_A.stl +- Alternative_B_1.stl +- Alternative_B_2.stl title: HOYMK SSR Mount diff --git a/printer_mods/xbst_/Hat_LED_Mount/.metadata.yml b/printer_mods/xbst_/Hat_LED_Mount/.metadata.yml index 0e30d732a..e5ced74c0 100644 --- a/printer_mods/xbst_/Hat_LED_Mount/.metadata.yml +++ b/printer_mods/xbst_/Hat_LED_Mount/.metadata.yml @@ -5,4 +5,6 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Hat_LED.stl title: Hat LED Mount diff --git a/printer_mods/xbst_/LED_Holder/.metadata.yml b/printer_mods/xbst_/LED_Holder/.metadata.yml index 35ac9702d..3294500cd 100644 --- a/printer_mods/xbst_/LED_Holder/.metadata.yml +++ b/printer_mods/xbst_/LED_Holder/.metadata.yml @@ -6,4 +6,6 @@ mod_version: 1 printer_compatibility: - V1.8 - V2.4 +stl: +- LED_Holder.stl title: PCB LED Holder diff --git a/printer_mods/xbst_/Max31865_DIN_Mount/.metadata.yml b/printer_mods/xbst_/Max31865_DIN_Mount/.metadata.yml index dc5efcf2e..dc681819c 100644 --- a/printer_mods/xbst_/Max31865_DIN_Mount/.metadata.yml +++ b/printer_mods/xbst_/Max31865_DIN_Mount/.metadata.yml @@ -6,4 +6,6 @@ mod_version: 1 printer_compatibility: - V1.8 - V2.4 +stl: +- Max31865.stl title: DIN Mount Max31865 diff --git a/printer_mods/xbst_/Omron_DIN_Mount/.metadata.yml b/printer_mods/xbst_/Omron_DIN_Mount/.metadata.yml index 6237de04e..640e00c30 100644 --- a/printer_mods/xbst_/Omron_DIN_Mount/.metadata.yml +++ b/printer_mods/xbst_/Omron_DIN_Mount/.metadata.yml @@ -5,4 +5,6 @@ mod_version: 1 printer_compatibility: - V1.8 - V2.4 +stl: +- Relay.stl title: DIN Mount Omron Relay diff --git a/printer_mods/xbst_/Relay_DIN_Mount/.metadata.yml b/printer_mods/xbst_/Relay_DIN_Mount/.metadata.yml index d6df6415c..575292a46 100644 --- a/printer_mods/xbst_/Relay_DIN_Mount/.metadata.yml +++ b/printer_mods/xbst_/Relay_DIN_Mount/.metadata.yml @@ -5,4 +5,6 @@ mod_version: 1 printer_compatibility: - V1.8 - V2.4 +stl: +- Relay.stl title: DIN Mount Pi 4x Relay Board diff --git a/printer_mods/xbst_/V0_Electronic_Panel/.metadata.yml b/printer_mods/xbst_/V0_Electronic_Panel/.metadata.yml index 6df7e6c79..bf93d1d75 100644 --- a/printer_mods/xbst_/V0_Electronic_Panel/.metadata.yml +++ b/printer_mods/xbst_/V0_Electronic_Panel/.metadata.yml @@ -5,4 +5,8 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Left_x2.stl +- Panel.stl +- Right_x2.stl title: V0 Electronics Cover diff --git a/printer_mods/xbst_/V0_M4_Mod/.metadata.yml b/printer_mods/xbst_/V0_M4_Mod/.metadata.yml index a497cdd39..316bc8f9d 100644 --- a/printer_mods/xbst_/V0_M4_Mod/.metadata.yml +++ b/printer_mods/xbst_/V0_M4_Mod/.metadata.yml @@ -5,4 +5,7 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- End_Plate.stl +- Motor_Plate.stl title: Mobius 4 (M4) V0 Mod diff --git a/printer_mods/xbst_/V0_Picam/.metadata.yml b/printer_mods/xbst_/V0_Picam/.metadata.yml index 7da15ff84..11477c1a3 100644 --- a/printer_mods/xbst_/V0_Picam/.metadata.yml +++ b/printer_mods/xbst_/V0_Picam/.metadata.yml @@ -5,4 +5,8 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Ball.stl +- Cam_A.STL +- Cam_B.STL title: V0 PiCam Mount diff --git a/printer_mods/xbst_/V0_Screw_Front_Hinge_Mod/.metadata.yml b/printer_mods/xbst_/V0_Screw_Front_Hinge_Mod/.metadata.yml index a9b02add9..6b68ef392 100644 --- a/printer_mods/xbst_/V0_Screw_Front_Hinge_Mod/.metadata.yml +++ b/printer_mods/xbst_/V0_Screw_Front_Hinge_Mod/.metadata.yml @@ -4,4 +4,12 @@ images: [] mod_version: 1 printer_compatibility: - V0.2 +stl: +- Bottom_Corner.stl +- Bottom_Corner_Hinge.stl +- Corner_Drill_Guide.stl +- Handle.stl +- Handle_Drill_Guide.stl +- Top_Corner.stl +- Top_Corner_Hinge.stl title: Screwed Front Door Hinge diff --git a/printer_mods/xbst_/V0_Skirt_Buttons/.metadata.yml b/printer_mods/xbst_/V0_Skirt_Buttons/.metadata.yml index 6aa6e5708..88b4a8439 100644 --- a/printer_mods/xbst_/V0_Skirt_Buttons/.metadata.yml +++ b/printer_mods/xbst_/V0_Skirt_Buttons/.metadata.yml @@ -6,4 +6,25 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- Buttoned/A.stl +- Buttoned/B.stl +- Buttonless/A.stl +- Buttonless/B.stl +- Buttons/Abort.stl +- Buttons/accept.stl +- Buttons/Empty.stl +- Buttons/estop.stl +- Buttons/fl_sw.stl +- Buttons/Fw_rl.stl +- Buttons/Home.stl +- Buttons/mesh.stl +- Buttons/Pause.stl +- Buttons/Power.stl +- Buttons/Preheat.stl +- Buttons/qgl.stl +- Buttons/resume.stl +- Buttons/Stop.stl +- OLED_Cover/Buttons.stl +- OLED_Cover/Front.stl title: V0 Buttons & OLED Mount diff --git a/printer_mods/xbst_/V2.4_Fanless_Middle_Skirt/.metadata.yml b/printer_mods/xbst_/V2.4_Fanless_Middle_Skirt/.metadata.yml index bc9a98bc3..7911f3dee 100644 --- a/printer_mods/xbst_/V2.4_Fanless_Middle_Skirt/.metadata.yml +++ b/printer_mods/xbst_/V2.4_Fanless_Middle_Skirt/.metadata.yml @@ -4,4 +4,6 @@ images: [] mod_version: 1 printer_compatibility: - V2.4 +stl: +- MS.stl title: V2.4 Fanless Middle Skirt diff --git a/printer_mods/xbst_/V2.4_Skirt_Buttons/.metadata.yml b/printer_mods/xbst_/V2.4_Skirt_Buttons/.metadata.yml index 8f2e05ef6..6342e7979 100644 --- a/printer_mods/xbst_/V2.4_Skirt_Buttons/.metadata.yml +++ b/printer_mods/xbst_/V2.4_Skirt_Buttons/.metadata.yml @@ -9,4 +9,21 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- 250/250.stl +- 250/250_mirror.stl +- 300/300.stl +- 300/300_mirror.stl +- 350/350.stl +- 350/350_mirror.stl +- Buttons/flm_sw.stl +- Buttons/fw_restart.stl +- Buttons/Home.stl +- Buttons/mesh.stl +- Buttons/Pause.stl +- Buttons/Power.stl +- Buttons/preheat.stl +- Buttons/qgl.stl +- Buttons/resume.stl +- Buttons/Stop.stl title: V2.4 Skirt Buttons diff --git a/printer_mods/xbst_/ZipClip_v0/.metadata.yml b/printer_mods/xbst_/ZipClip_v0/.metadata.yml index 1825b0497..87c2820f8 100644 --- a/printer_mods/xbst_/ZipClip_v0/.metadata.yml +++ b/printer_mods/xbst_/ZipClip_v0/.metadata.yml @@ -4,4 +4,6 @@ images: [] mod_version: 1 printer_compatibility: - V0.2 +stl: +- ZipClip.stl title: ZipClip V0 diff --git a/printer_mods/xceled/Single_Panel_Magnet_Mount/.metadata.yml b/printer_mods/xceled/Single_Panel_Magnet_Mount/.metadata.yml index 951c9a337..85d25faaa 100644 --- a/printer_mods/xceled/Single_Panel_Magnet_Mount/.metadata.yml +++ b/printer_mods/xceled/Single_Panel_Magnet_Mount/.metadata.yml @@ -8,4 +8,35 @@ images: mod_version: 1 printer_compatibility: - V2.4 +stl: +- STL/250/PanelCoverBL.stl +- STL/250/PanelCoverBR.stl +- STL/250/PanelCoverTL.stl +- STL/250/PanelCoverTR.stl +- STL/250/SlotBL.stl +- STL/250/SlotBR.stl +- STL/250/SlotTL.stl +- STL/250/SlotTR.stl +- STL/250/TLDrillGuide.stl +- STL/250/TRDrillGuide.stl +- STL/300/PanelCoverBL.stl +- STL/300/PanelCoverBR.stl +- STL/300/PanelCoverTL.stl +- STL/300/PanelCoverTR.stl +- STL/300/SlotBL.stl +- STL/300/SlotBR.stl +- STL/300/SlotTL.stl +- STL/300/SlotTR.stl +- STL/300/TLDrillGuide.stl +- STL/300/TRDrillGuide.stl +- STL/350/PanelCoverBL.stl +- STL/350/PanelCoverBR.stl +- STL/350/PanelCoverTL.stl +- STL/350/PanelCoverTR.stl +- STL/350/SlotBL.stl +- STL/350/SlotBR.stl +- STL/350/SlotTL.stl +- STL/350/SlotTR.stl +- STL/350/TLDrillGuide.stl +- STL/350/TRDrillGuide.stl title: Single Panel Magnet Mount diff --git a/printer_mods/yenda/vsw_more_robust_belt_paths/.metadata.yml b/printer_mods/yenda/vsw_more_robust_belt_paths/.metadata.yml index 91355bf47..9b71c759c 100644 --- a/printer_mods/yenda/vsw_more_robust_belt_paths/.metadata.yml +++ b/printer_mods/yenda/vsw_more_robust_belt_paths/.metadata.yml @@ -15,4 +15,15 @@ images: mod_version: 1 printer_compatibility: - VSW +stl: +- stl/xz_block_left_a_x1.stl +- stl/xz_block_left_b_x1.stl +- stl/xz_block_right_a_x1.stl +- stl/xz_block_right_b_x1.stl +- stl/x_motor_mount_a_x1.stl +- stl/x_motor_mount_b_x1.stl +- stl/z_motor_mount_a_x1.stl +- stl/z_motor_mount_b_x1.stl +- stl/[a]_upper_idler_support_b_left_x1.stl +- stl/[a]_upper_idler_support_b_right_x1.stl title: SW More Robust XZ Belt Paths diff --git a/printer_mods/yeri/V0_Magnetic_Panels/.metadata.yml b/printer_mods/yeri/V0_Magnetic_Panels/.metadata.yml index 9415e968a..2d25435f8 100644 --- a/printer_mods/yeri/V0_Magnetic_Panels/.metadata.yml +++ b/printer_mods/yeri/V0_Magnetic_Panels/.metadata.yml @@ -5,4 +5,9 @@ images: [] mod_version: 1 printer_compatibility: - V0.2 +stl: +- Mounting_Plate_v2.stl +- Panel_Mount_v2.stl +- Side_Mounting_Plate.stl +- Side_Panel_Mount.stl title: V0 Magnetic Panels diff --git a/printer_mods/yeri/V1_3Z/.metadata.yml b/printer_mods/yeri/V1_3Z/.metadata.yml index 09c95acc3..99a3b2887 100644 --- a/printer_mods/yeri/V1_3Z/.metadata.yml +++ b/printer_mods/yeri/V1_3Z/.metadata.yml @@ -12,4 +12,11 @@ images: mod_version: 1 printer_compatibility: - V1.8 +stl: +- STL/Bottom_Panel_Cutout_Cover.stl +- STL/Bottom_Panel_Cutout_Cover_2_Color.stl +- STL/Z_Bed_Mount_Front.stl +- STL/Z_Bed_Mount_Rear.stl +- STL/Z_Motor_Mount_Front.stl +- STL/Z_Motor_Mount_Rear.stl title: V1 3Z diff --git a/printer_mods/zruncho/V0_No_Drop_Nuts/.metadata.yml b/printer_mods/zruncho/V0_No_Drop_Nuts/.metadata.yml index d2adfbc13..63bfdc1d9 100644 --- a/printer_mods/zruncho/V0_No_Drop_Nuts/.metadata.yml +++ b/printer_mods/zruncho/V0_No_Drop_Nuts/.metadata.yml @@ -15,4 +15,12 @@ images: mod_version: 1 printer_compatibility: - V0.2 +stl: +- stl/NoDropNut_12mm.stl +- stl/NoDropNut_15mm.stl +- stl/NoDropNut_Door_Latch_x2.stl +- stl/NoDropNut_Rear_Ext_Front_x2.stl +- stl/NoDropNut_Rear_Ext_Rear_Center_x1.stl +- stl/NoDropNut_Rear_Ext_Rear_Edge_x2.stl +- stl/NoDropNut_Side_Ext_Side_x2.stl title: V0 No-Drop Nuts