V0 skirt with 0.96" OLED (#114)

printer_mods/README.md

@@ -34,6 +34,7 @@ like so:
 | |[Din Rail mount](./hijax_pl/din_rail_mount) |Adapter to attach DIN Rail to 2020 extrusion. |:x: |:x: |:heavy_check_mark: |
 | |[Controler Board adapters](./hijax_pl/ender_compatible_controller_mount) |DIN (rotated) and legacy adapters for boards like SKR mini E3. |:grey_question: |:x: |:heavy_check_mark: |
 |Kruppes |[V0 Printed Deck with inserts](./Kruppes/Deck_Panel_inserts_logo) |Electronics Deck Panel using brass heat inserts. Optional with accent color Voron Logo. |:heavy_check_mark: |:x: |:x: |
+|madros |[V0 OLED-skirt](./madros/V0_skirt_OLED) |V0 skirt with 0.96" OLED|:heavy_check_mark: |:x: |:x: |
 |MarcPot |[UHP PSU Bracket Clip](./MarcPot/UHP_PSU_Bracket_Clip)|DIN rail mount for the Mean Well UHP series PSU. |:grey_question: |:grey_question: |:heavy_check_mark: |
 | |[Hour Counter Skirt + Keystone Skirt](./MarcPot/Skirt_Mods)|Skirt mod for a mechanical hour counter and keystone inserts |:x: |:x: |:heavy_check_mark: |
 |mjoaris |[10x11 Cable Chain Endcaps](./mjoaris/10x11_Cable_Chain_Endcaps) |Printable Endcaps for 10x11 Cable Chains |:x: |:heavy_check_mark: |:heavy_check_mark: |

printer_mods/madros/V0_skirt_OLED/Readme.md

@@ -0,0 +1,35 @@
+--------------------------------------------------------------------------------
+V0 | 0.96" OLED
+--------------------------------------------------------------------------------
+<p align="center">
+  <img src="img/V0_skirt_OLED.svg" width="800" title="V0 skirt">
+</p>
+
+Use an 0.96" OLED for displaying:
+- hotend temperature
+- heater temperature
+- fan
+- flow
+- time (ellapsed|remaining)
+- coordinates x|y|z
+
+--------------------------------------------------------------------------------
+Wiring
+--------------------------------------------------------------------------------
+used OLED-display:
+[0,96"OLED](https://www.aliexpress.com/item/32695790661.html?spm=a2g0s.9042311.0.0.27424c4dXvvuBS)
+
+The display has to be qualified for 5V
+
+<p align="center">
+  <img src="img/OLED.jpg" width="800" title="explode plan">
+</p>
+
+--------------------------------------------------------------------------------
+Firmware
+--------------------------------------------------------------------------------
+For SKR mini E3 v1.2 insert in your Klipper config:
+```
+[display]
+lcd_type: ssd1306
+```