diff --git a/printer_mods/README.md b/printer_mods/README.md
index a7079ebd7..209815766 100644
--- a/printer_mods/README.md
+++ b/printer_mods/README.md
@@ -270,6 +270,7 @@ like so:
 |randell   |[Door Hinges](./randell/Door_Hinges) |Door hinges that use an M3 bolt for a pin and bolts thru the panel |:x: |:x: |:heavy_check_mark: |:x:|
 ||[Microswitch Pod for PCB](./randell/Microswitch_Endstop) |Modified endstop pod for use of endstop switches mounted on a PCB |:x: |:x: |:heavy_check_mark: |:x:|
 | raymondh | [Large Spool Holders](./raymondh/LargeSpoolHolders) | Larger spool holders for KVP spools | :x: | :heavy_check_mark: | :heavy_check_mark: |:x:|
+| reQu1em00 | [Kirigami LED Bed Front](./reQu1em00/Kirigami_LED_Bed_Front) | Kirigami bed front with space for a single LED or Neopixel button |:heavy_check_mark:|:x:|:x:|:x:|:x:|
 | revnull | [Raspberry Pi 7inch Display Mount](./revnull/rpi_7in_display_mount) | An articulating mount for the offical Raspberry Pi 7inch touch screen | :grey_question: | :grey_question: | :heavy_check_mark: | :grey_question: |
 |Rhastlyn |[Wansview 1080p Camera Mount](./Rhastlyn/WansviewCameraMount) |A camera mount that replaces the OEM part to allow the camera to be mounted to a 2020 extrusion | :x: |:grey_question: |:heavy_check_mark: |:x:|
 | |[60mm Fan Cover](./Rhastlyn/60mmFanCover)|A easy to install cover for spec 60mm fans originally designed for a 2.4 build| :x: |:grey_question: |:heavy_check_mark: |:x:|
diff --git a/printer_mods/reQu1em00/Kirigami_LED_Bed_Front/Kirigami_Bed_LED_Diffuser .stl b/printer_mods/reQu1em00/Kirigami_LED_Bed_Front/Kirigami_Bed_LED_Diffuser .stl
new file mode 100644
index 000000000..a34153947
Binary files /dev/null and b/printer_mods/reQu1em00/Kirigami_LED_Bed_Front/Kirigami_Bed_LED_Diffuser .stl differ
diff --git a/printer_mods/reQu1em00/Kirigami_LED_Bed_Front/Kirigami_Bed_LED_Front.stl b/printer_mods/reQu1em00/Kirigami_LED_Bed_Front/Kirigami_Bed_LED_Front.stl
new file mode 100644
index 000000000..5de285dff
Binary files /dev/null and b/printer_mods/reQu1em00/Kirigami_LED_Bed_Front/Kirigami_Bed_LED_Front.stl differ
diff --git a/printer_mods/reQu1em00/Kirigami_LED_Bed_Front/README.md b/printer_mods/reQu1em00/Kirigami_LED_Bed_Front/README.md
new file mode 100644
index 000000000..b35055372
--- /dev/null
+++ b/printer_mods/reQu1em00/Kirigami_LED_Bed_Front/README.md
@@ -0,0 +1,31 @@
+# V0 Kirigami bed front with space for LED
+
+This is a modifaction of the V0 Kirigami front bed made by Kosh42EFG
+
+![Bedfront](https://user-images.githubusercontent.com/62263528/154589228-073a1a1f-0118-4c81-ae40-8124b2f32eaf.jpg)
+
+## BOM
+
+- Kirigami bed: https://github.com/christophmuellerorg/voron_0_kirigami_bed
+- 1x Kirigami_LED_Bed_Front.stl printed in ABS using standard Voron settings
+- 1x Kirigami_LED_Bed_Front_defuser.stl printed in any white material
+- 2x M3x8 CHCS
+- 2x M3 nuts
+- 1x LED.  I use a single neopixel mini button
+- 4x wires for the neopixel (you can use three if this is the only one in the chain)
+
+## Installation
+
+- Install the kirigami bed
+- Wire the neopixel and place in the slot with the wires coming out through the tunnel
+- Add the defuser in front of the neopixel, make sure it is a tight fit to hold it well (print thicker if needed)
+![Beddefuser2](https://user-images.githubusercontent.com/62263528/154589930-c60789e9-885c-4b87-a207-555da5d146f4.jpg)
+- Fit the Kirigami_LED_Bed_Front.stl to the front of the kirigami bed using the M3 screws and nuts
+- Add configuration change to the printer.cfg in klipper:
+    - [neopixel my_leds]
+    - pin: PA8
+    - chain_count: 1
+    - color_order: GRB
+    - initial_RED: 1.0
+    - initial_GREEN: 0.0
+    - initial_BLUE: 0.0