Lgx lite toolhead pcb mount (#610)

* Initial commit of LGX Lite toolhead PCB mount

* Added discord username

* Update README.md

* Change to threaded insert holes

Holes for threaded inserts step down to 3.4mm with a chamfer for printability

* Added spacer

Mount will interfere with the gears without washers or a spacer

* Changes due to adding spacer

* Update LGX_Lite_toolhead_PCB_mount.stl

Change to go with spacer

* Spacer and mount improvements

Should work better with the screw lengths

* Updated images and readme

* Added CAD folder and file

* Removed V0 check mark for LGX Lite toolhead PCB mount

* Update README.md

State how it was tested (version 3.2 of the toolhead PCB)

* Uploading untested PCB cover

* Rearrage

* Fixed readme

* Changed image

* jpg not jpeg

* Typo in readme

* Delete STL

* PCB cover

* Change to readme

* Update readme

* Update readme

* Added download instructions and image to readme

* Update readme

* Update readme

* Remove cover folder

Co-authored-by: cbc02009 <39525900+cbc02009@users.noreply.github.com>

printer_mods/Fiction/LGX_Lite_toolhead_PCB_mount/README.md

@@ -13,6 +13,11 @@ Tested with version 3.2 of the toolhead PCB https://github.com/VoronDesign/Voron
 - install the threaded inserts from the flat side of the mount. This will leave some plastic between the threaded insert and the PCB to prevent damage to traces etc
 - use the spacer or washers between the mount and the LGX Lite body to avoid interference with the gears
 
+## STLs
+- if you're having problems downloading the STLs, right-click on the *Download* or *Raw* link and *Save Link As...* or the equivalent for your browser
+
+![](./Images/github_download.png)
+
 ## Images
 ![](./Images/LGX_Lite_toolhead_PCB_mount_photo_01.jpg)
 ![](./Images/LGX_Lite_toolhead_PCB_mount_07.png)