Exhaust Adapter for 100mm ventilation systems (#550)

* initial pull request for Angry CAM USB module

* corrected readme.md file

* updated readme.md file and removed obsolete images

* added missing images for cable path description

* remove obsolete images

* removed  spaces from all file names and added more pictures to the readme.md

* reduced number of pictures and corrected typos in ReadMe.md

* added exhaust adapter for 100mm ventilation systems

* update of ReadMe.md files to correct typos and add more mounting information

* removed space characters from names

* corrected link to *.stl file

* added newline as trigger for CI to Readme.md

Co-authored-by: cbc02009 <39525900+cbc02009@users.noreply.github.com>

printer_mods/README.md

@@ -84,6 +84,7 @@ like so:
 | chrisrgonzales | [270° Front Panel Hinge](./chrisrgonzales/270_degree_hinge) | Hinges that have 270° of swivel, parametric CAD included | :x: | :x: | :heavy_check_mark: | :x: |
 | christophmueller | [Phaetus and Zodiac Dragonfly BMO Afterburner toolheads](./christophmueller/Phaetus_Dragonfly_BMO_Afterburner) | Covers both the original Phaetus variant as well as the Zodiac one. | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |
 | chri.kai.in | [Angry CAM USB](./chri.kai.in/Angry_CAM_USB) | Housing for small USB camera module, allowing mounting to gantry or frame profiles | :x: | :grey_question: | :heavy_check_mark: | :grey_question: | :grey_question: |
+| | [Exhaust Adapter 100mm](./chri.kai.in/Exhaust_Adapter_100mm) | Replace 60mm exhaust fan with 100mm ventilation system adapter | :x: | :heavy_check_mark: | :heavy_check_mark: | :x: | :heavy_check_mark: |
 |claytono|[Fysetc S6 V2 Mount](./claytono/fysetc-s6-v2-mount)| DIN Mount for the Fysetc S6 V2 controller |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:|
 ||[Voron 2.4 Extrusion Jig](./claytono/2.4-extrusion-jig)|A jig help align extrusions to get a properly square frame |:x:|:x:|:heavy_check_mark:|:x:|
 ||[V0 Zip Tie Skirts](./claytono/v0-zip-tie-skirts)|V0 skirts with small loops added along the top to allow zip tyiing cables to them|:heavy_check_mark:|:x:|:x:|:x:

printer_mods/chri.kai.in/Exhaust_Adapter_100mm/ReadMe.md

@@ -0,0 +1,50 @@
+# <b> Exhaust Adapter to 100mm ventilation system</b>
+
+Please find attached my exhaust adapter to a 100 mm ventilation system. The adapter replaces the original 60mm fan on the exhaust housing of Voron 2.4 and comparable 3d printers.
+
+![Exhaust Adatper 100mm](Images/Exhaust_Adapter_ISO_rendered_bright.png)  
+
+## <b>Printing</b>
+
+Printing succesful with standard VORON settings. Support should not be required, as dedicated structure has been added for increased rigidity and to avoid necessary support structures.
+
+Use the following *.stl file for realization in one print:
+- [VORON2_v2.4_Exhaust_Adapter_100mm_RC3.stl](STL/VORON2_v2.4_Exhaust_Adapter_100mm_RC3.stl) 
+
+![Exhaust Adapter ISO View](Images/Exhaust_Adapter_ISO.png)  
+![Exhaust Adapter Side View](Images/Exhaust_Adapter_sideview.png)  
+
+## <b>Additional Material</b>
+
+Bill of Material:
+- 4x M3x8 SHCS bolts
+- 2x 90-110mm hose clamps (e.g. local hardware store)
+
+Optional:
+
+- 1x 100mm Ø flexible ventilation hose (e.g. local hardware store)
+- 4x M3x10 BHCS bolts for reverse mounting
+- 4x M3 hex nut
+- 4x M3 washer
+
+## <b>Mounting</b>
+
+### Replacing the original 60mm fan
+
+Losen the screws of your original 60mm fan and detach the fan from the exhaust housing. Pre-load the mounting holes in the exhaust adapter with M3x8 SHCS bolts and align and fix the adapter to your exhaust housing with the 100mm opening facing away from your printer.
+
+Screwing the bolts at the upper side of the adapter requires a hex key with ball ends. Alternatively you can screw M3x10 bolts inverse from the inner side of the exhaust housing and mount the adapter with M3 washers and hex nuts.
+
+The exisiting 24V supply for exhaust fan can be used with an external SSR for the control of an AC ventilation system or as input for any ventilation valve system in central exhaust system set ups. (Mind electrical isolation between printer and exhaust system !)
+
+Slide a 100mm Ø flexible ventilation hose over the 100mm opening and fix it with one or both of the hose clamps.
+
+Alternatively rigid 100 mm PVC ventilation pipes can be directly slided over the adapter and sealed with remains of 3mm sealing tape from your enclosure panels.
+
+## <b>FAQ</b>
+
+<i> No Questions and Answers yet. </i>
+
+#### Question ?
+* Answer.
+