Merge branch 'master' into master

printer_mods/Iakabos/C920_mount/README.md

@@ -0,0 +1 @@
+Slim mount for logitech c920 webcam. Inspired by PhilLeMint's mount. Requires dissambly of webcam as seen here: https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077

printer_mods/JaredC01/Mini_12864_Voron_Knob/readme.md

@@ -0,0 +1,17 @@
+# Mini 12864 LCD Voron Knob
+
+### Images
+![Image](./knobdark.jpg)
+![Image](./knoblight.jpg)
+
+This is a replacement knob designed for the Mini 12864 Display with RGB LEDs (Fystec).  The knob is designed to be printed in PLA and does not account for any shrinkage when printing with ABS, and may damage the knob if printed in ABS! **YOU HAVE BEEN WARNED!**
+
+The first 3.0mm of the knob is the Voron logo portion, and can be printed in a different color to make it stand out (as shown above).  Best bet is to use the same permiter and infill settings as functional parts for best light diffusion if using clear PLA.
+
+### Instructions
+## Clear Dual Color PLA
+1. In your slicer of choice, set a filament change after the first 3.0mm.
+2. After the first 3.0mm (starting at 3.2mm when using 0.2mm LH), switch from color PLA to clear PLA and continue printing.  For best results, purge any remaining color filament when switching to clear.
+
+## Single-color PLA
+1. Load up the STL and print like any other part.

printer_mods/README.md

@@ -52,9 +52,11 @@ If your mod is lacking a column in the compatibility matrix, feel free to submit
 |Gamsche | [Keystone Skirt Panel](./Gamsche/skirt_keystone)| 25mm skirt panel with integrated keystone jack.  Use with 50mm smaller adjacent skirts for proper fit. |:grey_question: |:grey_question: |:heavy_check_mark:|
 |Glowtape | [MKS GenL 1.0 Mounting Bracket](./Glowtape)| MKS GenL 1.0 Mounting Bracket|:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark:|
 |GustavTheMighty | [4.3 PanelDue Case](./GustavtheMighty/4.3-Paneldue_Case)|Case/mount for the 4.3 PanelDue LCD Display  |:heavy_check_mark:  | :heavy_check_mark: |:heavy_check_mark:  |
-|Iakabos | [Mini12864 Display Mount](./Iakabos/Mini12864_display_mount)|Case and mounting arms for a Fysetc Mini12864 display |:grey_question: |:heavy_check_mark: |:heavy_check_mark: |
+|Iakabos| [c920_Mount](./Iakabos/C920_mount)|Slim mount for logitech c920 webcam|:grey_question:|:heavy_check_mark:|:heavy_check_mark:|
+| | [Mini12864 Display Mount](./Iakabos/Mini12864_display_mount)|Case and mounting arms for a Fysetc Mini12864 display |:grey_question: |:heavy_check_mark: |:heavy_check_mark: |
 | Hackdoggo| [BMGobius](./hackdoggo/v2/bmgobius)|Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears |:heavy_check_mark:  | :heavy_check_mark: | :heavy_check_mark: |
 |hiemmer | [Tool Holders](./hiemmer/Tool_Holders)| Tool holder for calipers, screwdriver etc| :grey_question:| :grey_question:|:grey_question: |
+|JaredC01 | [Mini 12864 Voron Knob](./JaredC01/Mini_12864_Voron_Knob) | Upgraded knob for Fystec Mini 12864 RGB LED Display | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |
 | Jasperkm | [5mm panel mounting](./Jasperkm/5mm_panel_mounting)| Edited panel clips for 4mm panel + 1mm foam tape| :x: | :heavy_check_mark: | :heavy_check_mark: |
 | | [Brush holder](./Jasperkm/Brush_holder)| Brush holder next to printbed | :x: | :heavy_check_mark: | :heavy_check_mark: |
 | | [Cable management](./Jasperkm/Cable_management)| Cable trunking and 2020 slot cover | :x: | :heavy_check_mark: | :heavy_check_mark: |
@@ -91,6 +93,7 @@ If your mod is lacking a column in the compatibility matrix, feel free to submit
 |pnokel |[Cable Zipper](./pnokel) |Small mount to secure wires with zip ties |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: |
 | |[Coroplast holders](./pnokel) | Different coroplast holders for added support |:x:| :heavy_check_mark:|:grey_question: |
 | |[Toothed Idler](./pnokel) |14.5mm toothed idler | :x: | :x: |:x:|
+| przybybr|[V2.1 Omron Mount](./przybybr/V2_1OmronMount/) | Mount for Omron probe in V2.1 | :grey_question:|:heavy_check_mark: | :x:|
 | Railgunner|[Dual Direct Drive X Carriage](./Railgunner/10mmBMGx2) |Dual direct drive using 2x Bondtech BMG | :grey_question:|:grey_question: |:grey_question: |
 | Seamen|[RAMPS Extender Holder](./Seamen/RAMPS-Extender_holder) |Mount for RAMPS board with the stepper extender |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: |
 |Sparreau | [5V Power Supply Mount](./Sparreau)|5V Power Supply Mount |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: |
@@ -116,6 +119,6 @@ If your mod is lacking a column in the compatibility matrix, feel free to submit
 | wile.e.coyote| [Coroplast Support](./wile.e.coyote)|Support for the coroplast to prevent sagging | :x: |:heavy_check_mark: |:grey_question: |
 | |[Dual Buck Bracket](./wile.e.coyote)   |Mounting bracket for 2 buck converters | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |
 | |[Nozzle Scrubber Mount](./wile.e.coyote) | Mount for brass brush. Used for cleaning nozzle before printing |:x: | :heavy_check_mark: |:heavy_check_mark: |
-| | [Wago Mounts](./wile.e.coyote)  | Different mounts for Wago connectors | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: | 
+| | [Wago Mounts](./wile.e.coyote)  | Different mounts for Wago connectors | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |
 
 ---

printer_mods/blamm/jigs/README.md

@@ -0,0 +1,6 @@
+Small jig to drill the blind holes in your 2020 extrusions.
+
+Secure it with a bolt on the top, M5 for most extrusions, M6 for Type-B (Bosch) extrusions.
+Most extrusions need the 6mm files, unless you also print the 5mm files for your Voron, then pick that one.
+
+![Blind Joint Jig](blind_hole_jig.png)

printer_mods/przybybr/V2_1OmronMount/README.md

@@ -0,0 +1 @@
+This mount allows an Omron probe to be mounted in a Voron V2.1 printer.  Print two, install sensor with indicator light on left side so it will be visible with sensor installed.