From 36a05b5d2a347af2aba6c88a3a2e1ffeb64cae2e Mon Sep 17 00:00:00 2001 From: Florian Heilmann Date: Wed, 13 Nov 2019 22:45:18 +0100 Subject: [PATCH] Update README.md of printer_mods --- printer_mods/README.md | 428 ++++++++--------------------------------- 1 file changed, 85 insertions(+), 343 deletions(-) diff --git a/printer_mods/README.md b/printer_mods/README.md index 33ec0f2bd..9cb6972fe 100644 --- a/printer_mods/README.md +++ b/printer_mods/README.md @@ -1,355 +1,97 @@ # Mods -A neatly structured list of all the content in each folder -Remember to update this README when uploading new mods! +Printer mods for Voron 3D printers +Remember to update this README when uploading new mod! -## List structure +## Table structure -The list should be structured in the following way: +Update the following table with the information about your mod: +- Your name +- A link to your sub-folder +- A short description of your mod +- The printer compatibility. Use `:heavy_check_mark:` for :heavy_check_mark:,`:x:` for :x: and `:grey_question:` for :grey_question: -## "Creator of mods" +like so: +` +| Creator | [Mod title](link) | Description | :x: | :x: | :x: |` -"Mods name" +## Updating the compatibility matrix -- "Small desciption of the mod" - -"Mod 2's name" - -- "Small desciption of the mod" +If your mod is lacking a column in the compatibility matrix, feel free to submit a PR to get it updated! --- -## 3D_Black - -[Fan Covers](./3D_Black) - -- Different fan covers for 40mm fans. - -## Andreq - -[Mobius Shaft Jig](./andreq/voron2) - -- Tool used for grinding flats on a shaft at specific places. - -## Armstr0ng - -[Led extrusions mount](./Armstr0ng) - -- A mount for aluminium LED extrusions with hidden fasteners - -## ArmyAg08 - -[Logitech C270 Mounts](./ArmyAg08/Logitech_C270_Mounts) - -- Different C270 camera mounts, attached to the extrusions. - -[Corner Panel Clip](./ArmyAg08/Panels) - -- Corner panel clip that fit 3mm or 1/8" panels with foam tape. - -## Danowar -[Dual Mobius Mount](./Danowar/Dual_Mobuis_Mount) - -- Mounts two Mobius Extruders to the back of the printer. - -[F6 Board Mount](./Danowar/F6_Board_Mount) - -- Mounts for FYSETCS F6 controller boards. - -[Humidity Sensor Bracket](./Danowar/Humidity_Sensor_Bracket) - -- Mount for Humidity/Temperature sensor. - -[Load Cell Spool Holder](./Danowar/Load_Cell_Spool_Holder) - -- Spool holder with built in weight scale. - -[TL 2-to-1 Mosquito Toolhead Adapter](./Danowar/TL_2-to-1_Mosquito_Toolhead_Adapter) - -- Mounts the Triangle Labs 2-to-1 adapter directly to the mosquito toolhead. - -[Tablet mount](./Danowar/Tablet_Mount) - -- Detachable mount for tablet using magnets. - -## Dunar - -[Panel Rest](./Dunar/Panel_Rest) - -- External panel holder - -## FHeilmann - -[Voron 2.0 5mm Parts](./FHeilmann/VORON2_5mm_Parts) - -- Parts modified for extrusions with 5mm gap. - -[Voron 2.1 5mm Parts](./FHeilmann/VORON2.1_5mm_parts) - -- Parts modified for extrusions with 5mm gap. - -## Fulg - -[PanelDue5 LCD Mount](./Fulg/VORON2/PanelDue5) - -- Mount for the PanelDue5 LCD display. - -## GSL12 - -[WAGO 221 Mounts](./GSL12/wago_221_mount) - -## Glowtape - -[MKS GenL 1.0 Mounting Bracket](./Glowtape) - -## GustavTheMighty - -[4.3 PanelDue Case](./GustavtheMighty/4.3-Paneldue_Case) - -- Case/mount for the 4.3 PanelDue LCD Display. - -## Hackdoggo - -[BMGobius](./hackdoggo/v2/bmgobius) - -- Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears. - -## Jass_on - -[Tempered glass clips/handle](./Jass_on/Voron_2.1.1_Tempered_Glass) - -- Panel clips and handles for using tempered glass side panels. - -[Rear panel clips](./Jass_on) - -[SKR 1.3 Cooling bracket](./Jass_on) - -- SKR 1.3 mount with built in 40mm fan mount. - -## JeJeff - -[2020 Extrusion slot cover](./JeJeff/VORON2.1/2020_5mm_Slot_Cover) - -- Slot covers for extrusions with 5mm slot width. - -[Cable Tie Mount](./JeJeff/VORON2.1/Cable_Tie_Mount) - -- Cable tie mounts for 4mm cable ties. - -[Main Plug Panel](./JeJeff/VORON2.1/Mains_Plug_Panel_with_RJ45_Panel_Mount) - -- Main Plug Panel modified to hold a RJ45 ethernet socket. - -## Jink - -[Coroplast mount](./Jink/VORON_2.1/Coroplast_Mount) - -- Mount / Bracket supporting the coroplast sheets. - -[Filament runout sensor mount](./Jink/VORON_2.1/Filament_Runout_Sensor_Mount) - -[Left handed RAMPS mount](./Jink/VORON_2.1/Left_Handed_Ramps_Mount) - -- Mirrored RAMPS bracket. - -[Spool holder with scale](./Jink/VORON_2.1/Spool_Holder_With_Scale) - -[WAGO Mount](./Jink/VORON_2.1/WAGO_Mount) - -- Mount for 3x WAGO connectors. - -## JustinVoelker - -[Mains Plug Panel with RJ45](./JustinVoelker/VORON2) - -- Mains plug panel with ethernet cutout. - -## K1JWG - -[PanelDue 7i Custom Logo](./K1JWG/PanelDue7iLogo) - -- Custom Voron 2 logo for use as a PanelDue 7i startup splash screen. - -## Koios - -[Front Panel Locks](./Koios/6mm_Glass) - -- Front panel locks for 6mm tempered glass panels. - -[Logitech C920 Mount](./Koios) - -- Mount for C920 secured to the top front extrusion. - -[LED Mounts](./Koios) - -- Different mounts for LED light bars. - -## OrkusMG - -[Waveshare 5 Inch LCD Cover](./OrkusMG/Waveshare5inchHDMILCDscreenCover) - -- Display Cover for the Waveshare 5 inch HDMI LCD screen. - - -## Railgunner - -[Dual Direct Drive X Carriage](./Railgunner/10mmBMGx2) - -- Dual direct drive using 2x Bondtech BMG. - -## Seamen - -[RAMPS Extender Holder](./Railgunner/10mmBMGx2) - -- Mount for RAMPS board with the stepper extender. - -## Sparreau - -[5V Power Supply Mount](./Sparreau) - -[FSR Circuit Mount](./Sparreau) - -- Bracket for mounting the FSR PCB. - -[Z Rail Stop](./Sparreau) - -[Bed Extrusion Spacer](./Sparreau) - -[Dial Indicator Fan Mount](./Sparreau) - -- Mount for attaching a dial indicator to the X Carriage. - -[Mains Plug Panel Parametric](./Sparreau) - -- Scalable mains plug panel with small modifications. - -[Z Idler Frame Extra Tab](./Sparreau) - -- An extra tab added to the Z idler to prevent sagging / rotation. - -## Stephan - -[M12 Probeholder](./Stephan/M12_probeholder) - -- Drop in replacement of the stock probe to a M12. - -[BlTouch Mount](./Stephan/bltouch_mount) - -- Drop in replacement of the stock probe to a BLTouch. - -## daveidmx - -[30mm Fan Adapter](./daveidmx/VORON2) - -- 30mm fan adapter for the X carriage. - -## etherwalker - -[Pi Zero Camera Mount](./etherwalker/Pi_Zero_Camera_Mount) - -## exquyre - -[Anet 12864 Display](./exquyre/Anet_12864_display) - -- Case for Anet 12864 LCD display. - -[LED Bar Mount](./exquyre/LED_bar_mount) - -- Mount for 12V LED bars to the top extrusions. - -[Cable Cover Insert](./exquyre/cable_cover) - -- Room for 3-4 20AWG wires. - -[Einsy + RAMPS Combo](./exquyre/einsy%2Bramps) - -- Mounting bracket for 1 Einsy and 1 RAMPS. - -## hiemmer - -[Tool Holders](./hiemmer/Tool_Holders) - -- Tool holder for calipers, screwdriver etc. - -## nemgrea - -[Magnetic Split Front Door](./nemgrea/magnetic_split_front_door) - -- Hinges, handles and magnet mounts for creating a split front door panel. - -## pnokel - -[Cable Zipper](./pnokel) - -- Small mount to secure wires with zip ties. - -[Coroplast holders](./pnokel) - -- Different coroplast holders for added support. - -[Toothed Idler](./pnokel) - -- 14.5mm toothed idler. - -## steve450 - -[Corner Brackets](./steve450/Voron2.1) - -- Corner brackets preventing rotation of the extrusions, and stiffening the joints. -Also covers the Z-belt hole for improved aesthetics. - -## synfinatic - -[Duet Fan Mount](./synfinatic/Duet-Fan-Mount) - -- Duet/Duex fan mount with air vents directly above the steppers to increase airflow. - -[E-Stop Switch](./synfinatic/E-Stop-Switch) - -- Mount for emergency button attached to the top of the printer. - -[Filament DryBox](./synfinatic/Filament-DryBox) - -- Mount for filament drybox attached to the side of the printer. - -[LED Mount](./synfinatic/LED-Mount) - -- Mount for LED lightbars. - -[PS Extra Bracket](./synfinatic/PS-Extra-Bracket) - -- Extra bracket to keep the power supply in place. - -[RJ45 Mount](./synfinatic/RJ45-Mount) - -- Mount for an ethernet coupler to extend / move the ethernet plug somewhere more convenient. - -## warriorofwire - -[Openbuilds Drag Chain](./warriorofwire/openbuilds_drag_chain) - -- Collection of models for using an off-the-shelf, cheap, snap opening drag chain for gantry wiring and protecting wires down to the deck. - -[Direct Drive BMG-m mount](./warriorofwire/bmg_direct_drive) - -- Open toolhead mounting plans for Bondtech BMG-m and Mosquito direct drive combo. - -## wile.e.coyote - -[Coroplast Support](./wile.e.coyote) - -- Support for the coroplast to prevent sagging. - -[Dual Buck Bracket](./wile.e.coyote) - -- Mounting bracket for 2 buck converters. - -[Nozzle Scrubber Mount](./wile.e.coyote) - -- Mount for brass brush. Used for cleaning nozzle before printing. - -[Wago Mounts](./wile.e.coyote) - -- Different mounts for Wago connectors. +| Creator | Mod title | Description | V1.6 | V2.1 | V2.2 | +|---------|--------------|-------------|------|------|------| +| 3D_Black | [Fan Covers](./3D_Black) | Different fan covers for 40mm fans | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | +|Andreq | [Mobius Shaft Jig](./andreq/voron2)|Tool used for grinding flats on a shaft at specific places |:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: | +|Armstr0ng |[Led extrusions mount](./Armstr0ng) | A mount for aluminium LED extrusions with hidden fasteners | :grey_question:|:heavy_check_mark: | :heavy_check_mark:| +| ArmyAg08|[Logitech C270 Mounts](./ArmyAg08/Logitech_C270_Mounts) |Different C270 camera mounts, attached to the extrusions |:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: | +| | [Corner Panel Clip](./ArmyAg08/Panels)|Corner panel clip that fit 3mm or 1/8" panels with foam tape | :x:|:heavy_check_mark: | :heavy_check_mark:| +|Danowar |[Dual Mobius Mount](./Danowar/Dual_Mobuis_Mount) | Mounts two Mobius Extruders to the back of the printer| :heavy_check_mark:| :heavy_check_mark:|:heavy_check_mark: | +| |[F6 Board Mount](./Danowar/F6_Board_Mount) | Mounts for FYSETCS F6 controller boards|:heavy_check_mark: | :heavy_check_mark:| :heavy_check_mark:| +| |[Humidity Sensor Bracket](./Danowar/Humidity_Sensor_Bracket) |Mount for Humidity/Temperature sensor |:heavy_check_mark: |:heavy_check_mark: | :heavy_check_mark:| +| | [Load Cell Spool Holder](./Danowar/Load_Cell_Spool_Holder)| Spool holder with built in weight scale|:x: |:heavy_check_mark: |:heavy_check_mark: | +| | [TL 2-to-1 Mosquito Toolhead Adapter](./Danowar/TL_2-to-1_Mosquito_Toolhead_Adapter)| Mounts the Triangle Labs 2-to-1 adapter directly to the mosquito toolhead|:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: | +| | [Tablet mount](./Danowar/Tablet_Mount)|Detachable mount for tablet using magnets |:heavy_check_mark: |:heavy_check_mark: | :heavy_check_mark: | +| daveidmx| [30mm Fan Adapter](./daveidmx/VORON2)|30mm Fan Adapter | :grey_question:| :grey_question:|:grey_question: | +|Dunar |[Panel Rest](./Dunar/Panel_Rest) | External panel holder | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: | +|etherwalker |[Pi Zero Camera Mount](./etherwalker/Pi_Zero_Camera_Mount) | Pi Zero Camera Mount| :grey_question:| :grey_question:|:grey_question: | +|exquyre |[Anet 12864 Display](./exquyre/Anet_12864_display) | Case for Anet 12864 LCD display|:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: | +| |[LED Bar Mount](./exquyre/LED_bar_mount) |Mount for 12V LED bars to the top extrusions |:grey_question: | :heavy_check_mark:|:heavy_check_mark: | +| |[Cable Cover Insert](./exquyre/cable_cover) |Room for 3-4 20AWG wires | :grey_question:| :grey_question:|:grey_question: | +| |[Einsy + RAMPS Combo](./exquyre/einsy+ramps) |Mounting bracket for 1 Einsy and 1 RAMPs |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: | +|FHeilmann |[Voron 2.1 5mm Parts](./FHeilmann/VORON2.1_5mm_parts) |Parts modified for extrusions with 5mm gap. |:x: |:heavy_check_mark: | :x:| +| Fulg| [PanelDue5 LCD Mount](./Fulg/VORON2/PanelDue5)|Mount for the PanelDue5 LCD display |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: | +|GSL12 |[WAGO 221 Mounts](./GSL12/wago_221_mount) | Wago 221 mounts for the electronics bay |:heavy_check_mark: |:heavy_check_mark: | :heavy_check_mark:| +|Glowtape | [MKS GenL 1.0 Mounting Bracket](./Glowtape)| MKS GenL 1.0 Mounting Bracket|:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark:| +|GustavTheMighty | [4.3 PanelDue Case](./GustavtheMighty/4.3-Paneldue_Case)|Case/mount for the 4.3 PanelDue LCD Display |:heavy_check_mark: | :heavy_check_mark: |:heavy_check_mark: | +| Hackdoggo| [BMGobius](./hackdoggo/v2/bmgobius)|Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears |:heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | +|hiemmer | [Tool Holders](./hiemmer/Tool_Holders)| Tool holder for calipers, screwdriver etc| :grey_question:| :grey_question:|:grey_question: | +|Jass_on |[Tempered glass clips/handle](./Jass_on/Voron_2.1.1_Tempered_Glass) |Panel clips and handles for using tempered glass side panels | :x: | :heavy_check_mark: | :grey_question:| +| | [Rear panel clips](./Jass_on) | Rear Panel Clips| :x: | :heavy_check_mark: | :grey_question:| +| | [SKR 1.3 Cooling bracket](./Jass_on)|SKR 1.3 mount with built in 40mm fan mount |:heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | +|JeJeff |[2020 Extrusion slot cover](./JeJeff/VORON2.1/2020_5mm_Slot_Cover) |Slot covers for extrusions with 5mm slot width |:heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | +| |[Cable Tie Mount](./JeJeff/VORON2.1/Cable_Tie_Mount) |Cable tie mounts for 4mm cable ties |:heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | +| |[Main Plug Panel](./JeJeff/VORON2.1/Mains_Plug_Panel_with_RJ45_Panel_Mount) |Main Plug Panel modified to hold a RJ45 ethernet socket |:heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | +|Jink |[Coroplast mount](./Jink/VORON_2.1/Coroplast_Mount) |Mount / Bracket supporting the coroplast sheets | :x: | :heavy_check_mark: | :grey_question: | +| | [Filament runout sensor mount](./Jink/VORON_2.1/Filament_Runout_Sensor_Mount)|Filament runout sensor mount |:x: | :heavy_check_mark: | :grey_question: | +| |[Left handed RAMPS mount](./Jink/VORON_2.1/Left_Handed_Ramps_Mount) | Mirrored RAMPS bracket|:heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | +| | [Spool holder with scale](./Jink/VORON_2.1/Spool_Holder_With_Scale)|Spool holder with scale | :x: | :heavy_check_mark: | :grey_question: | +| |[WAGO Mount](./Jink/VORON_2.1/WAGO_Mount) |Mount for 3x WAGO connectors |:heavy_check_mark: | :heavy_check_mark:| :heavy_check_mark:| +| JustinVoelker|[Mains Plug Panel with RJ45](./JustinVoelker/VORON2) | Mains plug panel with ethernet cutout|:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: | +| K1JWG|[PanelDue 7i Custom Logo](./K1JWG/PanelDue7iLogo) |Custom Voron 2 logo for use as a PanelDue 7i startup splash screen |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: | +|Koios |[Front Panel Locks](./Koios/6mm_Glass) |Front panel locks for 6mm tempered glass panels | :x: | :heavy_check_mark: | :grey_question:| +| |[Logitech C920 Mount](./Koios) |Mount for C920 secured to the top front extrusion |:grey_question: |:heavy_check_mark: | :heavy_check_mark:| +| |[LED Mounts](./Koios) |Different mounts for LED light bars |:grey_question: |:heavy_check_mark: | :heavy_check_mark:| +|nemgrea |[Magnetic Split Front Door](./nemgrea/magnetic_split_front_door) |Hinges, handles and magnet mounts for creating a split front door panel |:x: |:heavy_check_mark: |:grey_question: | +|OrkusMG | [Waveshare 5 Inch LCD Cover](./OrkusMG/Waveshare5inchHDMILCDscreenCover)|Display Cover for the Waveshare 5 inch HDMI LCD screen |:heavy_check_mark: |:heavy_check_mark: | :heavy_check_mark:| +|pnokel |[Cable Zipper](./pnokel) |Small mount to secure wires with zip ties |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: | +| |[Coroplast holders](./pnokel) | Different coroplast holders for added support |:x:| :heavy_check_mark:|:grey_question: | +| |[Toothed Idler](./pnokel) |14.5mm toothed idler | :x: | :x: |:x:| +| Railgunner|[Dual Direct Drive X Carriage](./Railgunner/10mmBMGx2) |Dual direct drive using 2x Bondtech BMG | :grey_question:|:grey_question: |:grey_question: | +| Seamen|[RAMPS Extender Holder](./Seamen/RAMPS-Extender_holder) |Mount for RAMPS board with the stepper extender |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: | +|Sparreau | [5V Power Supply Mount](./Sparreau)|5V Power Supply Mount |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: | +| |[FSR Circuit Mount](./Sparreau) |Bracket for mounting the FSR PCB. |:x: |:heavy_check_mark: |:x: | +| | [Z Rail Stop](./Sparreau)|Z Rail Stop | :x: |:heavy_check_mark:| :heavy_check_mark:| +| | [Bed Extrusion Spacer](./Sparreau)|Bed Extrusion Spacer |:x: |:heavy_check_mark:| :heavy_check_mark:| +| |[Dial Indicator Fan Mount](./Sparreau) | Dial Indicator Fan Mount| :grey_question:| :grey_question:|:grey_question: | +| |[Mains Plug Panel Parametric](./Sparreau) |Scalable mains plug panel with small modifications |:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:| +| |[Z Idler Frame Extra Tab](./Sparreau) |An extra tab added to the Z idler to prevent sagging / rotation | :x:|:heavy_check_mark: |:x: | +|Stephan |[M12 Probeholder](./Stephan/M12_probeholder) | Drop in replacement of the stock probe to a M12|:grey_question: |:heavy_check_mark: | :grey_question:| +| |[BlTouch Mount](./Stephan/bltouch_mount) | Drop in replacement of the stock probe to a BLTouch|:grey_question: |:heavy_check_mark: | :grey_question:| +|steve450 |[Corner Brackets](./steve450/Voron2.1) | Corner brackets preventing rotation of the extrusions, and stiffening the joints. Also covers the Z-belt hole for improved aesthetics| :grey_question:| :heavy_check_mark:|:grey_question: | +| synfinatic|[Duet Fan Mount](./synfinatic/Duet-Fan-Mount) |Duet/Duex fan mount with air vents directly above the steppers to increase airflow |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: | +| |[E-Stop Switch](./synfinatic/E-Stop-Switch) |Mount for emergency button attached to the top of the printer |:x: | :heavy_check_mark:|:grey_question: | +| | [Filament DryBox](./synfinatic/Filament-DryBox)|Mount for filament drybox attached to the side of the printer |:x: | :heavy_check_mark:|:grey_question: | +| |[LED Mount](./synfinatic/LED-Mount) |Mount for LED lightbars |:grey_question: |:heavy_check_mark: |:heavy_check_mark: | +| | [PS Extra Bracket](./synfinatic/PS-Extra-Bracket)|Extra bracket to keep the power supply in place |:grey_question: |:grey_question: |:grey_question: | +| |[RJ45 Mount](./synfinatic/RJ45-Mount) |Mount for an ethernet coupler to extend / move the ethernet plug somewhere more convenient |:grey_question: |:grey_question: |:grey_question: | +|warriorofwire | [Openbuilds Drag Chain](./warriorofwire/openbuilds_drag_chain)|Collection of models for using an off-the-shelf, cheap, snap opening drag chain for gantry wiring and protecting wires down to the deck |:x: | :heavy_check_mark: | :x: | +| | [Direct Drive BMG-m mount](./warriorofwire/bmg_direct_drive)| Open toolhead mounting plans for Bondtech BMG-m and Mosquito direct drive combo|:grey_question: |:heavy_check_mark:|:grey_question: | +| wile.e.coyote| [Coroplast Support](./wile.e.coyote)|Support for the coroplast to prevent sagging | :x: |:heavy_check_mark: |:grey_question: | +| |[Dual Buck Bracket](./wile.e.coyote) |Mounting bracket for 2 buck converters | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: | +| |[Nozzle Scrubber Mount](./wile.e.coyote) | Mount for brass brush. Used for cleaning nozzle before printing |:x: | :heavy_check_mark: |:heavy_check_mark: | +| | [Wago Mounts](./wile.e.coyote) | Different mounts for Wago connectors | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: | ---