diff --git a/printer_mods/MarcPot/Skirt_Mods/250/hour_counter_skirt_a_250.stl b/printer_mods/MarcPot/Skirt_Mods/250/hour_counter_skirt_a_250.stl index 77516bd74..ed2405759 100644 Binary files a/printer_mods/MarcPot/Skirt_Mods/250/hour_counter_skirt_a_250.stl and b/printer_mods/MarcPot/Skirt_Mods/250/hour_counter_skirt_a_250.stl differ diff --git a/printer_mods/MarcPot/Skirt_Mods/250/hour_counter_skirt_b_250.stl b/printer_mods/MarcPot/Skirt_Mods/250/hour_counter_skirt_b_250.stl index 72e01c8b4..95601d4fc 100644 Binary files a/printer_mods/MarcPot/Skirt_Mods/250/hour_counter_skirt_b_250.stl and b/printer_mods/MarcPot/Skirt_Mods/250/hour_counter_skirt_b_250.stl differ diff --git a/printer_mods/MarcPot/Skirt_Mods/README.md b/printer_mods/MarcPot/Skirt_Mods/README.md index 86864b0cb..219deb622 100644 --- a/printer_mods/MarcPot/Skirt_Mods/README.md +++ b/printer_mods/MarcPot/Skirt_Mods/README.md @@ -2,6 +2,9 @@ ![All Options](Images/all_skirt_mods.JPEG) **WARNING I HAVE NOT TESTED THE 250 and 350 VERSIONS. PLEASE TELL ME IF YOU DID AND I'LL EDIT THIS WARNING.** + +**WARNING to give the hour counter enough clearance in the 250 version the hour counter will overlap the plug panel, this should not matter. But again, I haven't tested it.** + I have checked them all in my slicer and they sliced correctly. Also, if you think the keystones don't fit, try rotating them. @@ -22,6 +25,40 @@ No special printing instructions. They are skirts. ## Assembly instructions No special Assembly instructions. They are skirts. +## Configuration instructions +For the keystones there are no special configuration instructions. They are plug & play. + +For the hour counter there are multiple ways to set it up. The simplest way is to add it to Klipper as a heater_fan. + +``` +# Heater cooling fans (one may define any number of sections with a +# "heater_fan" prefix). A "heater fan" is a fan that will be enabled +# whenever its associated heater is active. +[heater_fan hour_counter] +pin: CHANGE THIS TO THE CONNECTED PIN NUMBER +#heater: extruder +# Name of the config section defining the heater that this hour counter is +# associated with. If a comma separated list of heater names is +# provided here, then the fan will be enabled when any of the given +# heaters are enabled. The default is "extruder". +heater_temp: 170 +# A temperature (in Celsius) that the heater must drop below before +# the hour counter is disabled. The default is 50 Celsius. +#fan_speed: 1.0 +# This should be kept at 1.0 +shutdown_speed: 0.0 +# The desired fan speed (expressed as a value from 0.0 to 1.0) if +# the micro-controller software enters an error state. This is set +# to 0.0 so that the counter won't go on while in error state. +``` +Thanks to hernsl#8860 for showing there is an easier way than macro's. + +When using a mains powered counter it should be set up using a relay, these relays can be controlled by the SKR's, then you don't have to change anything. +But when controlling the relay using the Raspberry Pi you need to setup the Pi as MCU. +Instructions on how to do this can be found at https://www.klipper3d.org/RPi_microcontroller.html + +Other options are the [Octoprint Enclosure Plugin](https://plugins.octoprint.org/plugins/enclosure/) for the mains counter, and the enclosure plugin + gcode macro's for SKR controller counters. + ## CAD I uploaded the original 300 cad files I created because I did some really ugly things to get to the 250 and 350. So you're probably better of starting at the 300 if you want to edit them yourself. I did save them ofcourse so contact me if you want the files. diff --git a/printer_mods/MarcPot/UHP_PSU_Bracket_Clip/CAD/UHP_PSU_Bracket_Double_Rail_Heatset_Insert.f3d b/printer_mods/MarcPot/UHP_PSU_Bracket_Clip/CAD/UHP_PSU_Bracket_Double_Rail_Heatset_Insert.f3d new file mode 100644 index 000000000..be9fd41dc Binary files /dev/null and b/printer_mods/MarcPot/UHP_PSU_Bracket_Clip/CAD/UHP_PSU_Bracket_Double_Rail_Heatset_Insert.f3d differ diff --git a/printer_mods/MarcPot/UHP_PSU_Bracket_Clip/CAD/UHP_PSU_Bracket_Double_Rail_Hexnut.f3d b/printer_mods/MarcPot/UHP_PSU_Bracket_Clip/CAD/UHP_PSU_Bracket_Double_Rail_Hexnut.f3d new file mode 100644 index 000000000..ffe3b7501 Binary files /dev/null and b/printer_mods/MarcPot/UHP_PSU_Bracket_Clip/CAD/UHP_PSU_Bracket_Double_Rail_Hexnut.f3d differ diff --git a/printer_mods/MarcPot/UHP_PSU_Bracket_Clip/README.md b/printer_mods/MarcPot/UHP_PSU_Bracket_Clip/README.md index ff5b79732..7325ecd84 100644 --- a/printer_mods/MarcPot/UHP_PSU_Bracket_Clip/README.md +++ b/printer_mods/MarcPot/UHP_PSU_Bracket_Clip/README.md @@ -2,7 +2,11 @@ ![All Options](Images/all_tests.JPEG) ## Overview -This is a DIN 3 Rail (35mm W) bracket for the Mean Well UHP series powersupply edited from [the official Voron Mean Well LRS series powersupply bracket](https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Electronics_Compartment/DIN_Brackets/lrs_psu_bracket_clip.stl). This design has 2 versions, one with an embedded nut and one with an heat-set insert. +This is a DIN 3 Rail (35mm W) bracket for the Mean Well UHP-200 series powersupply edited from [the official Voron Mean Well LRS series powersupply bracket](https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Electronics_Compartment/DIN_Brackets/lrs_psu_bracket_clip.stl). This design has 2 versions, one with an embedded nut and one with an heat-set insert. + +The double rail version is made for the spec rail distance and doesn't work for other distances. + +I added the CAD files so editing to other sizes should be wasy. If you can't do it yourself hit me up on Discord. ## BOM * 4x M3x6 BHCS. @@ -14,6 +18,9 @@ No special printing instructions. Part doesn't have to carry much weight. ## Assembly instructions Personally I added a little glue to the embedded nut to make it stick, but this is not needed. +For the double rail version you're supposed to screw the UHP to the last clip after attaching the clips to the rail. +Making a version that could be attached without this lost gripping strength or made the part harder than it needed to be. + ## Questions Reach me in Voron's [Discord](https://discord.gg/xgXWctB) @MarcPot#3983 if you have any questions. diff --git a/printer_mods/MarcPot/UHP_PSU_Bracket_Clip/uhp_200_psu_bracket_double_rail_heatset_insert_x2.stl b/printer_mods/MarcPot/UHP_PSU_Bracket_Clip/uhp_200_psu_bracket_double_rail_heatset_insert_x2.stl new file mode 100644 index 000000000..fbcd2c230 Binary files /dev/null and b/printer_mods/MarcPot/UHP_PSU_Bracket_Clip/uhp_200_psu_bracket_double_rail_heatset_insert_x2.stl differ diff --git a/printer_mods/MarcPot/UHP_PSU_Bracket_Clip/uhp_200_psu_bracket_double_rail_hexnut_x2.stl b/printer_mods/MarcPot/UHP_PSU_Bracket_Clip/uhp_200_psu_bracket_double_rail_hexnut_x2.stl new file mode 100644 index 000000000..90fcfe728 Binary files /dev/null and b/printer_mods/MarcPot/UHP_PSU_Bracket_Clip/uhp_200_psu_bracket_double_rail_hexnut_x2.stl differ diff --git a/printer_mods/MarcPot/UHP_PSU_Bracket_Clip/uhp_psu_bracket_heatset_insert.stl b/printer_mods/MarcPot/UHP_PSU_Bracket_Clip/uhp_200_psu_bracket_heatset_insert.stl similarity index 100% rename from printer_mods/MarcPot/UHP_PSU_Bracket_Clip/uhp_psu_bracket_heatset_insert.stl rename to printer_mods/MarcPot/UHP_PSU_Bracket_Clip/uhp_200_psu_bracket_heatset_insert.stl diff --git a/printer_mods/MarcPot/UHP_PSU_Bracket_Clip/uhp_psu_bracket_hexnut.stl b/printer_mods/MarcPot/UHP_PSU_Bracket_Clip/uhp_200_psu_bracket_hexnut.stl similarity index 100% rename from printer_mods/MarcPot/UHP_PSU_Bracket_Clip/uhp_psu_bracket_hexnut.stl rename to printer_mods/MarcPot/UHP_PSU_Bracket_Clip/uhp_200_psu_bracket_hexnut.stl