V0_Launchpad_skirts by ponkotsu1 (#990)

printer_mods/README.md

@@ -316,6 +316,7 @@ like so:
 |Phalanx |["Other" Idlers Mod](./Phalanx/Other-V2-Idlers/) | Allow usage of wider toolheads on the V2 |:x: |:grey_question: |:heavy_check_mark: |:x:|
 |piet206 |[V1.8 Z Rails Mod](./piet206/V1.8._Z_Rails_Mod) | Add MGN12H linear rails for Z axis motion |:x: |:heavy_check_mark: |:x: |:x:|
 | Polared | [Power Inlet with Keystone Insert](./Polared/Power_Inlet_w_Keystone_Insert) | Voron 0.1 Power inlet with keystone insert slot | :heavy_check_mark: | :x: | :x: | :x: | :x:|
+| ponkotsu1 | [V0 Launchpad Skirt](./ponkotsu1/V0_Launchpad_Skirt) | Another style V0 skirt | :heavy_check_mark: | :x: | :x: | :x: |
 | prasadp4009 | [StealthBurner CR Touch Mod](./prasadp4009/SW_SB_CRTouch) | Voron SW StealthBurner CR Touch Mod | :x: | :x: | :x: | :heavy_check_mark: | :x:|
 |Polar-Ted|[V0.1 Two Piece Back Panel](./Polar-Ted/V0_Two_Piece_Back_Panel/) | Vented 2 piece back panel for V0 |:heavy_check_mark: |:x: | :x: | :x: | :x: |
 | |[V0.1 Z nozzle endstop switch](./Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch/) | Sexbolt style switch for V0 |:heavy_check_mark: | :x: | :x: | :x: | :x: |

printer_mods/ponkotsu1/V0_Launchpad_Skirt/README.md

@@ -0,0 +1,13 @@
+# V0 Launchpad Skirt
+![top](Images/top.jpg)
+
+This is a skirt restyling mod.
+Three different display positions (or none) can be selected.
+
+![displayposition](Images/displayposition.png)
+
+Can be installed on V0.0~V0.2r1
+(V0.2r1 filament sensor is not supported. Can be installed without bottom panel.)
+
+## BOM
+[**48~52**]    2x10self tapping screw(Number required depends on configuration)