diff --git a/printer_mods/LoCoCNC/wire_grommets/Grommet_2.stl b/printer_mods/LoCoCNC/wire_grommets/Grommet_2.stl
new file mode 100644
index 000000000..38a2a2513
Binary files /dev/null and b/printer_mods/LoCoCNC/wire_grommets/Grommet_2.stl differ
diff --git a/printer_mods/LoCoCNC/wire_grommets/Grommet_3.stl b/printer_mods/LoCoCNC/wire_grommets/Grommet_3.stl
new file mode 100644
index 000000000..8b382d5d4
Binary files /dev/null and b/printer_mods/LoCoCNC/wire_grommets/Grommet_3.stl differ
diff --git a/printer_mods/LoCoCNC/wire_grommets/Grommet_4.stl b/printer_mods/LoCoCNC/wire_grommets/Grommet_4.stl
new file mode 100644
index 000000000..99676ca25
Binary files /dev/null and b/printer_mods/LoCoCNC/wire_grommets/Grommet_4.stl differ
diff --git a/printer_mods/LoCoCNC/wire_grommets/grommet_1.stl b/printer_mods/LoCoCNC/wire_grommets/grommet_1.stl
new file mode 100644
index 000000000..ecb1fea7f
Binary files /dev/null and b/printer_mods/LoCoCNC/wire_grommets/grommet_1.stl differ
diff --git a/printer_mods/LoCoCNC/wire_grommets/images/chamber_side.jpg b/printer_mods/LoCoCNC/wire_grommets/images/chamber_side.jpg
new file mode 100644
index 000000000..053b3b970
Binary files /dev/null and b/printer_mods/LoCoCNC/wire_grommets/images/chamber_side.jpg differ
diff --git a/printer_mods/LoCoCNC/wire_grommets/images/elec_bay_side.jpg b/printer_mods/LoCoCNC/wire_grommets/images/elec_bay_side.jpg
new file mode 100644
index 000000000..480633f30
Binary files /dev/null and b/printer_mods/LoCoCNC/wire_grommets/images/elec_bay_side.jpg differ
diff --git a/printer_mods/LoCoCNC/wire_grommets/readme.md b/printer_mods/LoCoCNC/wire_grommets/readme.md
new file mode 100644
index 000000000..5d509f82d
--- /dev/null
+++ b/printer_mods/LoCoCNC/wire_grommets/readme.md
@@ -0,0 +1,5 @@
+Print 4 pieces. Insert standard heatsets. Use Qty 2 M3x8 SHCS or BHCS.
+Wire openings for Keenovo standard wires for the bed heater, bed thermistor, ground wire.
+
+![Image of grommet chamber side](./images/chamber_side.jpg)
+![Image of grommet elec. side](./images/elec_bay_side.jpg)
diff --git a/printer_mods/README.md b/printer_mods/README.md
index cac64b60e..3efeb3071 100644
--- a/printer_mods/README.md
+++ b/printer_mods/README.md
@@ -161,6 +161,7 @@ like so:
 | | [3mm Top Hat Panels Clips](./LoCoCNC/3mm_tophat_panel_parts) | Required to use the 3mm (1/8") thick top hat panels for V0.1 |:heavy_check_mark:|:x:|:x:|:x:|
 | | [Strain Relief w/ 10 Pin Microfit](./LoCoCNC/Strain_Relief_w_Microfit) | Strain Relief with 10 pin Microfit connector |:heavy_check_mark:|:x:|:x:|:x:|
 | | [SSR Mounting Strap](./LoCoCNC/ssr_strap) | Mounting Strap for SSR on 1515 Extrusions |:heavy_check_mark:|:x:|:x:|:x:| 
+| | [V2.4 Bed Wiring Grommet](./LoCoCNC/wire_grommets) | Safely capture your bed wires thru the bottom panel |:x:|:x:|:heavy_check_mark:|:x:|
 |Long| [Mantis Dual 5015 Toolhead](./Long/Mantis_Dual_5015) | MGN12 Dual 5015 Toolhead for 2.4 & 1.8 |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:|
 |Majarspeed| [Hartk board mount galileo](./Majarspeed/Hartk_Mount_Galileo) | It hangs stuff on your tool | :x: | :x: | :heavy_check_mark: | :x: |
 |madros |[V0 OLED-skirt](./madros/V0_skirt_OLED) |V0 skirt with 0.96" OLED|:heavy_check_mark: |:x: |:x: |:x:|