diff --git a/printer_mods/README.md b/printer_mods/README.md index 982f072e6..edc52b023 100644 --- a/printer_mods/README.md +++ b/printer_mods/README.md @@ -26,7 +26,10 @@ like so: | Creator | Mod title | Description | V0 | V1.8 | V2.4 | VSW | | --- | --- | --- | --- | --- | --- | --- | |aeresov|[TL filament sensor bracket](./aeresov/TL_filament_sensor_bracket)|A bracket for TL filament sensor to mount near stock spool holder. |:x:|:grey_question:|:heavy_check_mark:|:x:| -||[MeanWell UHP-xxx DIN mount](./aeresov/TL_filament_sensor_bracket)|A bracket for MeanWell UHP series PSU (200, 350 and 500) to mount it across 2 DIN rails.|:x:|:grey_question:|:heavy_check_mark:|:x:| +||[MeanWell UHP-xxx DIN mount](./aeresov/MeanWell_UHP_DIN_mount)|A bracket for MeanWell UHP series PSU (200, 350 and 500) to mount it across 2 DIN rails.|:x:|:grey_question:|:heavy_check_mark:| +||[Raspberry Pi DIN mount](./aeresov/Raspberry_Pi_DIN_mount)|A bracket for Raspberry Pi 3/4 to mount it onto DIN rail, along or across.|:x:|:grey_question:|:heavy_check_mark:| +||[SKR 1.3/1.4 DIN mount](./aeresov/SKR_DIN_mount)|A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or across.|:x:|:grey_question:|:heavy_check_mark:| +||[cable tie DIN mount](./aeresov/cable_tie_DIN_mount)|A bracket for cable ties to route cables across DIN rails.|:x:|:grey_question:|:heavy_check_mark:| |albert|[IKEA Dioder Led Mount](./albert/IKEA_Dioder_Led_Mount)|A mount for the IKEA Dioder LED strip | :grey_question: | :grey_question: | :heavy_check_mark: |:x:| |arkeet|[Dial test indicator mount](./arkeet/dti-mount)|A toolhead mount for a dial test indicator, where the tip is located at the nozzle. |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:| |claytono|[Voron 2.4 Extrusion Jig](./claytono/2.4-extrusion-jig)|A jig help align extrusions to get a properly square frame |:x:|:x:|:heavy_check_mark:|:x:| diff --git a/printer_mods/aeresov/MeanWell_UHP_DIN_mount/CAD/MeanWell UHP DIN mount.f3d b/printer_mods/aeresov/MeanWell_UHP_DIN_mount/CAD/MeanWell_UHP_DIN_mount.f3d similarity index 100% rename from printer_mods/aeresov/MeanWell_UHP_DIN_mount/CAD/MeanWell UHP DIN mount.f3d rename to printer_mods/aeresov/MeanWell_UHP_DIN_mount/CAD/MeanWell_UHP_DIN_mount.f3d diff --git a/printer_mods/aeresov/MeanWell_UHP_DIN_mount/Readme.md b/printer_mods/aeresov/MeanWell_UHP_DIN_mount/Readme.md index 3d6e442ce..c982ce788 100644 --- a/printer_mods/aeresov/MeanWell_UHP_DIN_mount/Readme.md +++ b/printer_mods/aeresov/MeanWell_UHP_DIN_mount/Readme.md @@ -2,15 +2,10 @@
A Team Dropbear Production
-# Voron 2.4 Trianglelab filament sensor bracket +# Voron 2.4 MeanWell UHP PSU mount for DIN rail G'day, another nice thingy from down under. MeanWell UHP PSUs are great: nice, slim, compact, mains and DC on opposite sides... Well, but how to mount them on DIN rais? Alright, Dropbears to resque. Pick an adapter for your UHP (they have different width), print 2 of them and 4 of [rs25_psu_bracket_clip.stl](https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Electronics_Compartment/DIN_Brackets/rs25_psu_bracket_clip.stl). -Photos| -------| -![bracket top](images/photo1.png)| -![bracket bottom](images/photo2.png)| - ## Printing and plasic Standard Voron part printing guidelines to follow: 0.4 nozzle, 0.2 layer height, etc. @@ -26,5 +21,13 @@ BOM: Put square nuts in slide pockets, secure them with screws, then bolt down rs25 brackets, so square nuts are trapped. +## Photos --that russian guy (aeresov#9959) +![bare 1](images/photo_bare_1.png) +![bare 2](images/photo_bare_2.png) +![on rail 1](images/photo_railed_1.png) +![on rail 2](images/photo_railed_2.png) + +## Credits + +- that russian guy (aeresov#9959) diff --git a/printer_mods/aeresov/MeanWell_UHP_DIN_mount/STLs/UHP 200 series.stl b/printer_mods/aeresov/MeanWell_UHP_DIN_mount/STLs/UHP_200_series.stl similarity index 100% rename from printer_mods/aeresov/MeanWell_UHP_DIN_mount/STLs/UHP 200 series.stl rename to printer_mods/aeresov/MeanWell_UHP_DIN_mount/STLs/UHP_200_series.stl diff --git a/printer_mods/aeresov/MeanWell_UHP_DIN_mount/STLs/UHP 350 series.stl b/printer_mods/aeresov/MeanWell_UHP_DIN_mount/STLs/UHP_350_series.stl similarity index 100% rename from printer_mods/aeresov/MeanWell_UHP_DIN_mount/STLs/UHP 350 series.stl rename to printer_mods/aeresov/MeanWell_UHP_DIN_mount/STLs/UHP_350_series.stl diff --git a/printer_mods/aeresov/MeanWell_UHP_DIN_mount/STLs/UHP 500 series.stl b/printer_mods/aeresov/MeanWell_UHP_DIN_mount/STLs/UHP_500_series.stl similarity index 100% rename from printer_mods/aeresov/MeanWell_UHP_DIN_mount/STLs/UHP 500 series.stl rename to printer_mods/aeresov/MeanWell_UHP_DIN_mount/STLs/UHP_500_series.stl diff --git a/printer_mods/aeresov/MeanWell_UHP_DIN_mount/images/photo1.png b/printer_mods/aeresov/MeanWell_UHP_DIN_mount/images/photo1.png deleted file mode 100644 index 05e4ff121..000000000 Binary files a/printer_mods/aeresov/MeanWell_UHP_DIN_mount/images/photo1.png and /dev/null differ diff --git a/printer_mods/aeresov/MeanWell_UHP_DIN_mount/images/photo2.png b/printer_mods/aeresov/MeanWell_UHP_DIN_mount/images/photo2.png deleted file mode 100644 index 8d3005adf..000000000 Binary files a/printer_mods/aeresov/MeanWell_UHP_DIN_mount/images/photo2.png and /dev/null differ diff --git a/printer_mods/aeresov/MeanWell_UHP_DIN_mount/images/photo_bare_1.png b/printer_mods/aeresov/MeanWell_UHP_DIN_mount/images/photo_bare_1.png new file mode 100644 index 000000000..60b7fa3b2 Binary files /dev/null and b/printer_mods/aeresov/MeanWell_UHP_DIN_mount/images/photo_bare_1.png differ diff --git a/printer_mods/aeresov/MeanWell_UHP_DIN_mount/images/photo_bare_2.png b/printer_mods/aeresov/MeanWell_UHP_DIN_mount/images/photo_bare_2.png new file mode 100644 index 000000000..5e01e6837 Binary files /dev/null and b/printer_mods/aeresov/MeanWell_UHP_DIN_mount/images/photo_bare_2.png differ diff --git a/printer_mods/aeresov/MeanWell_UHP_DIN_mount/images/photo_railed_1.png b/printer_mods/aeresov/MeanWell_UHP_DIN_mount/images/photo_railed_1.png new file mode 100644 index 000000000..89c179c20 Binary files /dev/null and b/printer_mods/aeresov/MeanWell_UHP_DIN_mount/images/photo_railed_1.png differ diff --git a/printer_mods/aeresov/MeanWell_UHP_DIN_mount/images/photo_railed_2.png b/printer_mods/aeresov/MeanWell_UHP_DIN_mount/images/photo_railed_2.png new file mode 100644 index 000000000..708f24098 Binary files /dev/null and b/printer_mods/aeresov/MeanWell_UHP_DIN_mount/images/photo_railed_2.png differ diff --git a/printer_mods/aeresov/Raspberry_Pi_DIN_mount/CAD/RPi_DIN_mount.f3d b/printer_mods/aeresov/Raspberry_Pi_DIN_mount/CAD/RPi_DIN_mount.f3d new file mode 100644 index 000000000..1959d0eb9 Binary files /dev/null and b/printer_mods/aeresov/Raspberry_Pi_DIN_mount/CAD/RPi_DIN_mount.f3d differ diff --git a/printer_mods/aeresov/Raspberry_Pi_DIN_mount/Readme.md b/printer_mods/aeresov/Raspberry_Pi_DIN_mount/Readme.md new file mode 100644 index 000000000..94656699c --- /dev/null +++ b/printer_mods/aeresov/Raspberry_Pi_DIN_mount/Readme.md @@ -0,0 +1,31 @@ + +
A Team Dropbear Production
+ + +# Voron 2.4 Raspberry Pi mount for DIN rail + +G'day, another nice thingy from down under. Got non-standard electronics compartment? Some blocks there that don't allow spec placements? Don't have or don't like self-tapping screws? Or are you just up to better wiring and sturdier construction? Alright, Dropbears to resque. Here comes a rigid bracket for Raspberry Pi, that uses M3 bolts and nuts, and allows mounting along and across the rail. The bracket needs 1 of [rs25_psu_bracket_clip.stl](https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Electronics_Compartment/DIN_Brackets/rs25_psu_bracket_clip.stl). + +## Printing and plasic + +Standard Voron part printing guidelines to follow: 0.4 nozzle, 0.2 layer height, etc. +This part is not exposed to any significant heat, so you could probably use even PLA. + +## Assembly + +BOM: +* 6 x M3 hex nuts +* 6 x M3x12 SHCS screws + +Pi has mount holes for M2.5 bolts, so putting M3s through might be a problem. Just enlarge these holes with 3.0mm or 3.2mm drill, you won't damage the Pi but will make your life easier. + +## Photos + +![bare 1](images/photo_bare_1.png) +![bare 2](images/photo_bare_2.png) +![bare 3](images/photo_bare_3.png) +![on rail](images/photo_railed.png) + +## Credits + +- that russian guy (aeresov#9959) diff --git a/printer_mods/aeresov/Raspberry_Pi_DIN_mount/STLs/RPi_DIN_mount.stl b/printer_mods/aeresov/Raspberry_Pi_DIN_mount/STLs/RPi_DIN_mount.stl new file mode 100644 index 000000000..9720567db Binary files /dev/null and b/printer_mods/aeresov/Raspberry_Pi_DIN_mount/STLs/RPi_DIN_mount.stl differ diff --git a/printer_mods/aeresov/Raspberry_Pi_DIN_mount/images/db.png b/printer_mods/aeresov/Raspberry_Pi_DIN_mount/images/db.png new file mode 100755 index 000000000..735263f95 Binary files /dev/null and b/printer_mods/aeresov/Raspberry_Pi_DIN_mount/images/db.png differ diff --git a/printer_mods/aeresov/Raspberry_Pi_DIN_mount/images/photo_bare_1.png b/printer_mods/aeresov/Raspberry_Pi_DIN_mount/images/photo_bare_1.png new file mode 100644 index 000000000..2584ca219 Binary files /dev/null and b/printer_mods/aeresov/Raspberry_Pi_DIN_mount/images/photo_bare_1.png differ diff --git a/printer_mods/aeresov/Raspberry_Pi_DIN_mount/images/photo_bare_2.png b/printer_mods/aeresov/Raspberry_Pi_DIN_mount/images/photo_bare_2.png new file mode 100644 index 000000000..a22c02fe5 Binary files /dev/null and b/printer_mods/aeresov/Raspberry_Pi_DIN_mount/images/photo_bare_2.png differ diff --git a/printer_mods/aeresov/Raspberry_Pi_DIN_mount/images/photo_bare_3.png b/printer_mods/aeresov/Raspberry_Pi_DIN_mount/images/photo_bare_3.png new file mode 100644 index 000000000..092275437 Binary files /dev/null and b/printer_mods/aeresov/Raspberry_Pi_DIN_mount/images/photo_bare_3.png differ diff --git a/printer_mods/aeresov/Raspberry_Pi_DIN_mount/images/photo_railed.png b/printer_mods/aeresov/Raspberry_Pi_DIN_mount/images/photo_railed.png new file mode 100644 index 000000000..d14ee1128 Binary files /dev/null and b/printer_mods/aeresov/Raspberry_Pi_DIN_mount/images/photo_railed.png differ diff --git a/printer_mods/aeresov/SKR_DIN_mount/CAD/SKR_DIN_mount.f3d b/printer_mods/aeresov/SKR_DIN_mount/CAD/SKR_DIN_mount.f3d new file mode 100644 index 000000000..79d3a01f4 Binary files /dev/null and b/printer_mods/aeresov/SKR_DIN_mount/CAD/SKR_DIN_mount.f3d differ diff --git a/printer_mods/aeresov/SKR_DIN_mount/Readme.md b/printer_mods/aeresov/SKR_DIN_mount/Readme.md new file mode 100644 index 000000000..0b723ded0 --- /dev/null +++ b/printer_mods/aeresov/SKR_DIN_mount/Readme.md @@ -0,0 +1,30 @@ + +
A Team Dropbear Production
+ + +# Voron 2.4 SKR 1.3/1.4 mount for DIN rail + +G'day, another nice thingy from down under. Got non-standard electronics compartment? Some blocks there that don't allow spec placements? Don't have or don't like self-tapping screws? Or are you just up to better wiring and sturdier construction? Alright, Dropbears to resque. Here comes a rigid bracket for SKR boards, that uses M3 bolts and nuts, and allows mounting along and across the rail. Each bracket needs 2 of [rs25_psu_bracket_clip.stl](https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Electronics_Compartment/DIN_Brackets/rs25_psu_bracket_clip.stl). + +## Printing and plasic + +Standard Voron part printing guidelines to follow: 0.4 nozzle, 0.2 layer height, etc. +This part is not exposed to any significant heat, so you could probably use even PLA. + +## Assembly + +BOM: +* 8 x M3 hex nuts +* 8 x M3x12 SHCS screws + +## Photos + +![bare 1](images/photo_bare_1.png) +![bare 2](images/photo_bare_2.png) +![bare 3](images/photo_bare_3.png) +![on rail](images/photo_railed.png) + +## Credits + +- that russian guy (aeresov#9959) + diff --git a/printer_mods/aeresov/SKR_DIN_mount/STLs/SKR_DIN_mount.stl b/printer_mods/aeresov/SKR_DIN_mount/STLs/SKR_DIN_mount.stl new file mode 100644 index 000000000..077cd3158 Binary files /dev/null and b/printer_mods/aeresov/SKR_DIN_mount/STLs/SKR_DIN_mount.stl differ diff --git a/printer_mods/aeresov/SKR_DIN_mount/images/db.png b/printer_mods/aeresov/SKR_DIN_mount/images/db.png new file mode 100755 index 000000000..735263f95 Binary files /dev/null and b/printer_mods/aeresov/SKR_DIN_mount/images/db.png differ diff --git a/printer_mods/aeresov/SKR_DIN_mount/images/photo_bare_1.png b/printer_mods/aeresov/SKR_DIN_mount/images/photo_bare_1.png new file mode 100644 index 000000000..5420bebfc Binary files /dev/null and b/printer_mods/aeresov/SKR_DIN_mount/images/photo_bare_1.png differ diff --git a/printer_mods/aeresov/SKR_DIN_mount/images/photo_bare_2.png b/printer_mods/aeresov/SKR_DIN_mount/images/photo_bare_2.png new file mode 100644 index 000000000..a38e872a3 Binary files /dev/null and b/printer_mods/aeresov/SKR_DIN_mount/images/photo_bare_2.png differ diff --git a/printer_mods/aeresov/SKR_DIN_mount/images/photo_bare_3.png b/printer_mods/aeresov/SKR_DIN_mount/images/photo_bare_3.png new file mode 100644 index 000000000..32382e54d Binary files /dev/null and b/printer_mods/aeresov/SKR_DIN_mount/images/photo_bare_3.png differ diff --git a/printer_mods/aeresov/SKR_DIN_mount/images/photo_railed.png b/printer_mods/aeresov/SKR_DIN_mount/images/photo_railed.png new file mode 100644 index 000000000..036604c19 Binary files /dev/null and b/printer_mods/aeresov/SKR_DIN_mount/images/photo_railed.png differ diff --git a/printer_mods/aeresov/TL_filament_sensor_bracket/CAD/TL filament sensor bracket.f3d b/printer_mods/aeresov/TL_filament_sensor_bracket/CAD/TL_filament_sensor_bracket.f3d similarity index 100% rename from printer_mods/aeresov/TL_filament_sensor_bracket/CAD/TL filament sensor bracket.f3d rename to printer_mods/aeresov/TL_filament_sensor_bracket/CAD/TL_filament_sensor_bracket.f3d diff --git a/printer_mods/aeresov/TL_filament_sensor_bracket/Readme.md b/printer_mods/aeresov/TL_filament_sensor_bracket/Readme.md index 40ea54c88..e577c1bd6 100644 --- a/printer_mods/aeresov/TL_filament_sensor_bracket/Readme.md +++ b/printer_mods/aeresov/TL_filament_sensor_bracket/Readme.md @@ -6,9 +6,6 @@ G'day, another nice thingy from down under. Got TL filament sensor in your pile of parts? Bought it a year ago for 2.1 and too lazy to find a way to mount it so it plays well with spool holder? Upgraded to 2.4 and still have no clue? Alright, ask a mate to hold your beer, this is quick one: just print it and use instead of stock [bowen_retainer.stl](https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Spool_Management/bowen_retainer.stl). -![You know you want this](images/render1.png) -![And this too](images/render0.png) - ## Printing and plasic Standard Voron part printing guidelines to follow: 0.4 nozzle, 0.2 layer height, etc. @@ -26,5 +23,14 @@ Bolt your sensor to it, insert your PTFE tube to sensor's exit hole. Make Melbourne hipsters proud, do your wiring in braided sleeving and with fancy connectors. And have a flat white when you're done. +## Photos --that russian guy (aeresov#9959) +![bare 1](images/photo_bare_1.png) +![bare 2](images/photo_bare_2.png) +![on rail 1](images/photo_railed_1.png) +![on rail 2](images/photo_railed_2.png) + + +## Credits + +- that russian guy (aeresov#9959) diff --git a/printer_mods/aeresov/TL_filament_sensor_bracket/STLs/TL filament sensor bracket.stl b/printer_mods/aeresov/TL_filament_sensor_bracket/STLs/TL_filament_sensor_bracket.stl similarity index 100% rename from printer_mods/aeresov/TL_filament_sensor_bracket/STLs/TL filament sensor bracket.stl rename to printer_mods/aeresov/TL_filament_sensor_bracket/STLs/TL_filament_sensor_bracket.stl diff --git a/printer_mods/aeresov/TL_filament_sensor_bracket/images/photo_bare_1.png b/printer_mods/aeresov/TL_filament_sensor_bracket/images/photo_bare_1.png new file mode 100644 index 000000000..aae58c462 Binary files /dev/null and b/printer_mods/aeresov/TL_filament_sensor_bracket/images/photo_bare_1.png differ diff --git a/printer_mods/aeresov/TL_filament_sensor_bracket/images/photo_bare_2.png b/printer_mods/aeresov/TL_filament_sensor_bracket/images/photo_bare_2.png new file mode 100644 index 000000000..a94d8b095 Binary files /dev/null and b/printer_mods/aeresov/TL_filament_sensor_bracket/images/photo_bare_2.png differ diff --git a/printer_mods/aeresov/TL_filament_sensor_bracket/images/photo_railed_1.png b/printer_mods/aeresov/TL_filament_sensor_bracket/images/photo_railed_1.png new file mode 100644 index 000000000..2d25524a4 Binary files /dev/null and b/printer_mods/aeresov/TL_filament_sensor_bracket/images/photo_railed_1.png differ diff --git a/printer_mods/aeresov/TL_filament_sensor_bracket/images/photo_railed_2.png b/printer_mods/aeresov/TL_filament_sensor_bracket/images/photo_railed_2.png new file mode 100644 index 000000000..3a88e206a Binary files /dev/null and b/printer_mods/aeresov/TL_filament_sensor_bracket/images/photo_railed_2.png differ diff --git a/printer_mods/aeresov/TL_filament_sensor_bracket/images/render0.png b/printer_mods/aeresov/TL_filament_sensor_bracket/images/render0.png deleted file mode 100755 index 6732f82eb..000000000 Binary files a/printer_mods/aeresov/TL_filament_sensor_bracket/images/render0.png and /dev/null differ diff --git a/printer_mods/aeresov/TL_filament_sensor_bracket/images/render1.png b/printer_mods/aeresov/TL_filament_sensor_bracket/images/render1.png deleted file mode 100755 index 06e2422d0..000000000 Binary files a/printer_mods/aeresov/TL_filament_sensor_bracket/images/render1.png and /dev/null differ diff --git a/printer_mods/aeresov/cable_tie_DIN_mount/CAD/cable_tie_DIN_mount.f3d b/printer_mods/aeresov/cable_tie_DIN_mount/CAD/cable_tie_DIN_mount.f3d new file mode 100755 index 000000000..c1dc23b5a Binary files /dev/null and b/printer_mods/aeresov/cable_tie_DIN_mount/CAD/cable_tie_DIN_mount.f3d differ diff --git a/printer_mods/aeresov/cable_tie_DIN_mount/Readme.md b/printer_mods/aeresov/cable_tie_DIN_mount/Readme.md new file mode 100644 index 000000000..fe40b4886 --- /dev/null +++ b/printer_mods/aeresov/cable_tie_DIN_mount/Readme.md @@ -0,0 +1,29 @@ + +
A Team Dropbear Production
+ + +# Voron 2.4 cable tie mount for DIN rail + +G'day, another nice thingy from down under: a simple bracket that allows fixing your cables with standard 3.5mm plastic cable ties in various positions. 4 ties per bracket, 2x2 criss-cross, so you can make bends or straights. The bracket needs 1 of [rs25_psu_bracket_clip.stl](https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Electronics_Compartment/DIN_Brackets/rs25_psu_bracket_clip.stl). + +## Printing and plasic + +Standard Voron part printing guidelines to follow: 0.4 nozzle, 0.2 layer height, etc. +This part is not exposed to any significant heat, so you could probably use even PLA. + +## Assembly + +BOM: +* 2 x M3 hex nuts +* 2 x M3x12 SHCS screws +* standard 3.5mm cable ties + + +## Photos + +![bare](images/photo_bare.png) +![on rail](images/photo_railed.png) + +## Credits + +- that russian guy (aeresov#9959) diff --git a/printer_mods/aeresov/cable_tie_DIN_mount/STLs/cable_tie_DIN_mount.stl b/printer_mods/aeresov/cable_tie_DIN_mount/STLs/cable_tie_DIN_mount.stl new file mode 100755 index 000000000..0b596ffcd Binary files /dev/null and b/printer_mods/aeresov/cable_tie_DIN_mount/STLs/cable_tie_DIN_mount.stl differ diff --git a/printer_mods/aeresov/cable_tie_DIN_mount/images/db.png b/printer_mods/aeresov/cable_tie_DIN_mount/images/db.png new file mode 100755 index 000000000..735263f95 Binary files /dev/null and b/printer_mods/aeresov/cable_tie_DIN_mount/images/db.png differ diff --git a/printer_mods/aeresov/cable_tie_DIN_mount/images/photo_bare.png b/printer_mods/aeresov/cable_tie_DIN_mount/images/photo_bare.png new file mode 100644 index 000000000..ac553864d Binary files /dev/null and b/printer_mods/aeresov/cable_tie_DIN_mount/images/photo_bare.png differ diff --git a/printer_mods/aeresov/cable_tie_DIN_mount/images/photo_railed.png b/printer_mods/aeresov/cable_tie_DIN_mount/images/photo_railed.png new file mode 100644 index 000000000..3abf8f37c Binary files /dev/null and b/printer_mods/aeresov/cable_tie_DIN_mount/images/photo_railed.png differ