Merge branch 'master' into haribro_issue_fixer

printer_mods/Akio/cable_routing_z_belt_cover/README.md

@@ -2,6 +2,9 @@
 ## Credit
 Mod based on the design of the Voron crew.
 Thank you for your awesome work!
+&nbsp;<br/>
+A big thank you goes to [Mbravorus](https://github.com/mbravorus) as well, for contributing the rail notch version.
+
 ## Print settings
 As stated in the Voron documentation:
 * ABS
@@ -17,26 +20,60 @@ Only the printed file.
 ## Improvement
 Added the possibility to route cables on the bottom of the cover.
 ## Description
-I liked the design of the old Voron 2.2 covers more than the current design so I based my mod on them.
+I liked the design of the old Voron 2.2 covers more than the current design so I based my mod on them. But due to several requests I also included the current 2.4 covers.
 
-This mod allows to route cables that are hidden in the extrusions to the bottom compartment.
+To be able to achieve a clutter-free look i hid cables in the extrusions as much as possible.
-To achieve that the inner part of the z belt cover is a bit thicker and a path is cut out on the bottom where cables can be routed. The overall dimensions are the same as the stock 2.2 covers.
+So i also wanted to have a hidden way to route the cables to the bottom compartment. To achieve that i made
+the z belt cover a bit thicker and cut a path on the bottom where cables can be routed without being seen.
 
-Note: Be careful to restrict the cable in the bottom compartment so it does not rub on your z-belts.
+The files are named with v2.2 in the filename for the 2.2 version and v2.4 in the filename for the 2.4 version.
+
+## Things to consider during installation
+> The modified z belt covers are thicker than the originals. You may have to move up your z-rails, if you installed them flush to the top of the original covers. If you don't want to do this you can use the rail notch version, which has a cut-out for the rails.
+
+> Make sure to constrain the cable you are routing through to the bottom, so it does not interfere with the z-belts. Use a zip tie or tape to hold the cable securely in position / away from your z-belts.
 ## Pictures
-Top:
+![z belt cover old new](img/cable_routing_z_belt_cover_mod.png)
-
-![z belt cover](img/cable_routing_z_belt_cover_mod_img_0.png)
 &nbsp;<br/>
-Bottom with path for routing cables:
-
-![z belt cover](img/cable_routing_z_belt_cover_mod_img_1.png)
-&nbsp;<br/>
-Cable routing:
-
-![z belt cover](img/cable_routing_z_belt_cover_mod_img_3.jpg)
 &nbsp;<br/>
 
-Closed:
+![z belt cover](img/cable_routing_z_belt_cover_mod_v2.2_img_2.jpg)
+&nbsp;<br/>
+&nbsp;<br/>
+
+![z belt cover 2.2 top](img/cable_routing_z_belt_cover_mod_v2.2_img_0.png)
+*2.2 version - top*
+&nbsp;<br/>
+&nbsp;<br/>
+
+![z belt cover 2.2 bottom](img/cable_routing_z_belt_cover_mod_v2.2_img_1.png)
+*2.2 version - bottom with path for routing cables*
+&nbsp;<br/>
+&nbsp;<br/>
+
+![z belt cover 2.4 top](img/cable_routing_z_belt_cover_mod_v2.4_img_0.png)
+*2.4 version - top*
+&nbsp;<br/>
+&nbsp;<br/>
+
+![z belt cover 2.4 bottom](img/cable_routing_z_belt_cover_mod_v2.4_img_1.png)
+*2.4 version - bottom with path for routing cables*
+
+![z belt cover 2.4 rail notch](img/cable_routing_z_belt_cover_mod_rail_notch_v2.4_img_2.png)
+*2.4 version - top with rail notch*
+
+![z belt cover 2.4 rail notch](img/cable_routing_z_belt_cover_mod_cross_section_view_rail_notch.png)
+*2.4 version - cross section view of the rail notch version*
+
+## Wire routing
+![z belt cover](img/cable_routing_z_belt_cover_mod_cable_routing.png)
+*The cable needs to be wired like this below the cover*
+&nbsp;<br/>
+&nbsp;<br/>
+
+![z belt cover](img/cable_routing_z_belt_cover_mod_cross_section_view.png)
+*Cross section view*
+
+![z belt cover](img/cable_routing_z_belt_cover_mod_v2.2_img_3.jpg)
+&nbsp;<br/>
 
-![z belt cover](img/cable_routing_z_belt_cover_mod_img_2.jpg)

printer_mods/README.md

@@ -203,6 +203,7 @@ like so:
 |Iakabos| [c920 Mount](./Iakabos/C920_mount)|Slim mount for logitech c920 webcam|:x:|:heavy_check_mark:|:heavy_check_mark:|:x:|
 | | [V0 beltchains](./Iakabos/V0_beltchain)|Modified beltchain parts for V0 Z cables|:heavy_check_mark: |:x: |:x: |:x:|
 | iblue | [V0.1 Tophat Extractor](./iblue/TophatExtractor) | Tophat Extractor for the Voron V0.1 with activated charcoal and HEPA filter | :heavy_check_mark: | :x: | :x: | :x: | :x: |
+| jangrewe | [Bitter USB Cam](./jangrewe/Bitter_USB_Cam) | Modification of the "Angry Cam USB v2.0" webcam mount for 1515 extrusions| :heavy_check_mark: | :x: | :x: | :x: | :x: |
 | jappaj | [V0.1 FanSaver](./jappaj/FanSaver) | A printable fix for overheating V0.1 blower fans | :heavy_check_mark: | :x: | :x: | :x: | :x:|
 |jasonc |[V2.4 Z-Idler Shoulder Bolt Mod](./jasonc/Z_Idler_Shoulder_Bolt) |Modification to the idler carriers to accept a 25mm shoulder bolt. Ideal for Gates idlers. |:x: |:x: |:heavy_check_mark: |:x:|
 | Jasrags | [Feed slot with filament pass-through](./Jasrags/sw_fee_slot_filament_passthrough) | A feed slot with a filament pass-through | :x: | :x: | :x: | :heavy_check_mark: |:x:|

printer_mods/jangrewe/Bitter_USB_Cam/README.md

@@ -0,0 +1,9 @@
+# Bitter USB Cam
+
+![Bitter USB Cam](Images/Bitter_USB_Cam.png)
+
+This is a modification of [chri.kai.in's Angry CAM USB v2.0](../../chri.kai.in/Angry_CAM_USB) webcam mount for 1515 extrusions. It reuses the cam shell and front/back covers, and only changes the mounting blocks to fit "behind" the front extrusion of the top hat to looks down onto the bed.
+
+If you're wondering about the name: This USB Cam is not quite angry, as you can't see the furrowed eyebrows (couldn't fit them on there), so it's just bitter.
+
+For all instructions and further information, please have a look at the original [Angry CAM USB v2.0](../../chri.kai.in/Angry_CAM_USB)