Submit V2.4 (VT?V1.8?) umbilical mount for chain anchor (#848)

* Submit V2.4 (VT?V1.8?) umbilical mount for chain anchor

* Add STEP files

* Updated pictures and readme.md

rearranged pictures, too

printer_mods/README.md

@@ -389,6 +389,7 @@ like so:
 | | [DIN mount RS-15-5 PSU](./Tircown/DIN_mount_RS-15-5) | A DIN mount for the RS-15-5  | :grey_question: | :grey_question: | :heavy_check_mark: | :grey_question: |
 | | [V0.1 Skirt buttons](./Tircown/V01_skirt_buttons) | Buttons for V0.1 spec skirts | :heavy_check_mark: | :x: | :x: | :x: | :x: |
 | togi | [Exhaust housing side fitting](./togi/exhaust_housing_side_fitting) | Moves the exhaust housing bowden fitting 90 degrees to allow the printer to stand closer to a wall | :x: | :x: | :heavy_check_mark: |:x:|
+| top_gun_de | [mount_for_umbilical](./top_gun_de/mount_for_umbilical) | Umbilical guide that goes on the chain anchor | :x: | :grey_question: | :heavy_check_mark: | :x: | :grey_question: |
 | Triano | [Ender 3 Pro or V2 to Switchwire Mod](./Triano/Ender_3Pro_Switchwire) | Convesion of an Ender 3 Pro or V2 to a Switchwire | :x: | :x: | :x: | :heavy_check_mark: |
 | UltraWaffles | [Ender 3 to SW conversion](./Ultrawaffles/Ender_3_to_SW) | A conversion mod for the ender 3 to switchwire. Designed to allow for enclosure and uses original ender 3 motors and switches| :x: | :x: | :x: | :heavy_check_mark: |
 | VinnyCordeiro | [RGB LED grid for Stealthburner](./VinnyCordeiro/RGB_LED_grid_for_SB) | A small RGB LED grid for Stealthburner's logo | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |

printer_mods/top_gun_de/mount_for_umbilical/README.md

@@ -0,0 +1,27 @@
+# Guide for an umbilical with top feed, no cable gland required
+
+I added a toolhead board to my Galileo extruder, and the reduced wire-count suggests to move to an umbilical instead of an energy chain. It has been thoroughly tested with my Galileo and should work with Clockwork 1/2 or any extruder that offers the common anchor point for a 2- or 3-hole drag chain.
+
+This mount guides a sleeved wire bundle. My own umbilical enters the chamber at the top, through the exhaust opening, and is supported by a gallows. What I needed and designed, is the matching steady mount on the extruder end.
+
+This has no hardware requirements. Use your old fasteners to attach the guide to the anchor, mine are M3x8. 
+
+I put the wires into a standard polyethylene sleeve to protect them. For the length that runs down to the CAN-board, I used a heat-shrink, but that's general caution, not required for the mount.
+
+The key gets pushed in from the top to steady the umbilical in the guide. One end of the key is a bit thinner to allow easy insertion. If the cable is still too loose with the key, you can zip-tie it to the key, I added slots for that. 
+
+Caution:
+
+When you lock the umbilical with the key, make sure the length towards the CAN-board has a bit of slack. You don't want hard kinks in the cable!
+
+Total perspective:
+![Image 1](Images/Umbilical-total.jpg)
+
+Front view:
+![Image 2](Images/Umbilical-guide.jpg)
+
+Rear view:
+![Image 3](Images/Umbilical-rear.jpg)
+
+Side view:
+![Image 4](Images/Umbilical-side.jpg)

printer_mods/top_gun_de/mount_for_umbilical/STEP/Key.step

@@ -0,0 +1,638 @@
+ISO-10303-21;
+HEADER;
+/* Generated by software containing ST-Developer
+ * from STEP Tools, Inc. (www.steptools.com) 
+ */
+/* OPTION: using custom renumber hook */
+
+FILE_DESCRIPTION(
+/* description */ ('STEP AP242',
+'CAx-IF Rec.Pracs.---Representation and Presentation of Product Manufa
+cturing Information (PMI)---4.0---2014-10-13',
+'CAx-IF Rec.Pracs.---3D Tessellated Geometry---0.4---2014-09-14','2;1'),
+
+/* implementation_level */ '2;1');
+
+FILE_NAME(
+/* name */ '6352ff1fb5d19b22ef365809',
+/* time_stamp */ '2022-10-21T20:20:48+00:00',
+/* author */ (''),
+/* organization */ (''),
+/* preprocessor_version */ 'ST-DEVELOPER v18.102',
+/* originating_system */ '  ',
+/* authorisation */ '  ');
+
+FILE_SCHEMA (('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF { 1 0 10303 442 1 1 4 }'));
+ENDSEC;
+
+DATA;
+#10=SHAPE_REPRESENTATION_RELATIONSHIP('','',#375,#11);
+#11=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#373),#581);
+#12=ORIENTED_EDGE('',*,*,#108,.F.);
+#13=ORIENTED_EDGE('',*,*,#109,.T.);
+#14=ORIENTED_EDGE('',*,*,#110,.T.);
+#15=ORIENTED_EDGE('',*,*,#111,.F.);
+#16=ORIENTED_EDGE('',*,*,#112,.T.);
+#17=ORIENTED_EDGE('',*,*,#113,.F.);
+#18=ORIENTED_EDGE('',*,*,#114,.F.);
+#19=ORIENTED_EDGE('',*,*,#115,.T.);
+#20=ORIENTED_EDGE('',*,*,#116,.F.);
+#21=ORIENTED_EDGE('',*,*,#117,.T.);
+#22=ORIENTED_EDGE('',*,*,#118,.T.);
+#23=ORIENTED_EDGE('',*,*,#119,.F.);
+#24=ORIENTED_EDGE('',*,*,#120,.F.);
+#25=ORIENTED_EDGE('',*,*,#121,.F.);
+#26=ORIENTED_EDGE('',*,*,#122,.T.);
+#27=ORIENTED_EDGE('',*,*,#123,.T.);
+#28=ORIENTED_EDGE('',*,*,#124,.F.);
+#29=ORIENTED_EDGE('',*,*,#125,.T.);
+#30=ORIENTED_EDGE('',*,*,#126,.T.);
+#31=ORIENTED_EDGE('',*,*,#127,.F.);
+#32=ORIENTED_EDGE('',*,*,#128,.F.);
+#33=ORIENTED_EDGE('',*,*,#129,.T.);
+#34=ORIENTED_EDGE('',*,*,#130,.T.);
+#35=ORIENTED_EDGE('',*,*,#131,.F.);
+#36=ORIENTED_EDGE('',*,*,#132,.F.);
+#37=ORIENTED_EDGE('',*,*,#133,.F.);
+#38=ORIENTED_EDGE('',*,*,#134,.T.);
+#39=ORIENTED_EDGE('',*,*,#121,.T.);
+#40=ORIENTED_EDGE('',*,*,#135,.F.);
+#41=ORIENTED_EDGE('',*,*,#136,.F.);
+#42=ORIENTED_EDGE('',*,*,#137,.T.);
+#43=ORIENTED_EDGE('',*,*,#133,.T.);
+#44=ORIENTED_EDGE('',*,*,#138,.T.);
+#45=ORIENTED_EDGE('',*,*,#115,.F.);
+#46=ORIENTED_EDGE('',*,*,#139,.F.);
+#47=ORIENTED_EDGE('',*,*,#136,.T.);
+#48=ORIENTED_EDGE('',*,*,#140,.F.);
+#49=ORIENTED_EDGE('',*,*,#141,.F.);
+#50=ORIENTED_EDGE('',*,*,#142,.T.);
+#51=ORIENTED_EDGE('',*,*,#113,.T.);
+#52=ORIENTED_EDGE('',*,*,#143,.F.);
+#53=ORIENTED_EDGE('',*,*,#144,.F.);
+#54=ORIENTED_EDGE('',*,*,#145,.T.);
+#55=ORIENTED_EDGE('',*,*,#141,.T.);
+#56=ORIENTED_EDGE('',*,*,#146,.T.);
+#57=ORIENTED_EDGE('',*,*,#123,.F.);
+#58=ORIENTED_EDGE('',*,*,#147,.F.);
+#59=ORIENTED_EDGE('',*,*,#144,.T.);
+#60=ORIENTED_EDGE('',*,*,#134,.F.);
+#61=ORIENTED_EDGE('',*,*,#137,.F.);
+#62=ORIENTED_EDGE('',*,*,#139,.T.);
+#63=ORIENTED_EDGE('',*,*,#114,.T.);
+#64=ORIENTED_EDGE('',*,*,#142,.F.);
+#65=ORIENTED_EDGE('',*,*,#145,.F.);
+#66=ORIENTED_EDGE('',*,*,#147,.T.);
+#67=ORIENTED_EDGE('',*,*,#122,.F.);
+#68=ORIENTED_EDGE('',*,*,#132,.T.);
+#69=ORIENTED_EDGE('',*,*,#120,.T.);
+#70=ORIENTED_EDGE('',*,*,#146,.F.);
+#71=ORIENTED_EDGE('',*,*,#143,.T.);
+#72=ORIENTED_EDGE('',*,*,#140,.T.);
+#73=ORIENTED_EDGE('',*,*,#112,.F.);
+#74=ORIENTED_EDGE('',*,*,#138,.F.);
+#75=ORIENTED_EDGE('',*,*,#135,.T.);
+#76=ORIENTED_EDGE('',*,*,#108,.T.);
+#77=ORIENTED_EDGE('',*,*,#148,.T.);
+#78=ORIENTED_EDGE('',*,*,#125,.F.);
+#79=ORIENTED_EDGE('',*,*,#149,.F.);
+#80=ORIENTED_EDGE('',*,*,#149,.T.);
+#81=ORIENTED_EDGE('',*,*,#124,.T.);
+#82=ORIENTED_EDGE('',*,*,#150,.F.);
+#83=ORIENTED_EDGE('',*,*,#109,.F.);
+#84=ORIENTED_EDGE('',*,*,#150,.T.);
+#85=ORIENTED_EDGE('',*,*,#127,.T.);
+#86=ORIENTED_EDGE('',*,*,#151,.F.);
+#87=ORIENTED_EDGE('',*,*,#110,.F.);
+#88=ORIENTED_EDGE('',*,*,#111,.T.);
+#89=ORIENTED_EDGE('',*,*,#151,.T.);
+#90=ORIENTED_EDGE('',*,*,#126,.F.);
+#91=ORIENTED_EDGE('',*,*,#148,.F.);
+#92=ORIENTED_EDGE('',*,*,#116,.T.);
+#93=ORIENTED_EDGE('',*,*,#152,.T.);
+#94=ORIENTED_EDGE('',*,*,#129,.F.);
+#95=ORIENTED_EDGE('',*,*,#153,.F.);
+#96=ORIENTED_EDGE('',*,*,#153,.T.);
+#97=ORIENTED_EDGE('',*,*,#128,.T.);
+#98=ORIENTED_EDGE('',*,*,#154,.F.);
+#99=ORIENTED_EDGE('',*,*,#117,.F.);
+#100=ORIENTED_EDGE('',*,*,#154,.T.);
+#101=ORIENTED_EDGE('',*,*,#131,.T.);
+#102=ORIENTED_EDGE('',*,*,#155,.F.);
+#103=ORIENTED_EDGE('',*,*,#118,.F.);
+#104=ORIENTED_EDGE('',*,*,#119,.T.);
+#105=ORIENTED_EDGE('',*,*,#155,.T.);
+#106=ORIENTED_EDGE('',*,*,#130,.F.);
+#107=ORIENTED_EDGE('',*,*,#152,.F.);
+#108=EDGE_CURVE('',#156,#157,#188,.F.);
+#109=EDGE_CURVE('',#156,#158,#189,.F.);
+#110=EDGE_CURVE('',#158,#159,#190,.F.);
+#111=EDGE_CURVE('',#157,#159,#191,.F.);
+#112=EDGE_CURVE('',#160,#161,#192,.F.);
+#113=EDGE_CURVE('',#162,#161,#193,.F.);
+#114=EDGE_CURVE('',#163,#162,#194,.F.);
+#115=EDGE_CURVE('',#163,#160,#195,.T.);
+#116=EDGE_CURVE('',#164,#165,#196,.F.);
+#117=EDGE_CURVE('',#164,#166,#197,.F.);
+#118=EDGE_CURVE('',#166,#167,#198,.F.);
+#119=EDGE_CURVE('',#165,#167,#199,.F.);
+#120=EDGE_CURVE('',#168,#169,#200,.T.);
+#121=EDGE_CURVE('',#170,#168,#201,.T.);
+#122=EDGE_CURVE('',#170,#171,#202,.T.);
+#123=EDGE_CURVE('',#171,#169,#203,.F.);
+#124=EDGE_CURVE('',#172,#173,#204,.T.);
+#125=EDGE_CURVE('',#172,#174,#205,.T.);
+#126=EDGE_CURVE('',#174,#175,#206,.T.);
+#127=EDGE_CURVE('',#173,#175,#207,.T.);
+#128=EDGE_CURVE('',#176,#177,#208,.T.);
+#129=EDGE_CURVE('',#176,#178,#209,.T.);
+#130=EDGE_CURVE('',#178,#179,#210,.T.);
+#131=EDGE_CURVE('',#177,#179,#211,.T.);
+#132=EDGE_CURVE('',#180,#168,#212,.T.);
+#133=EDGE_CURVE('',#181,#180,#213,.T.);
+#134=EDGE_CURVE('',#181,#170,#214,.T.);
+#135=EDGE_CURVE('',#182,#180,#215,.T.);
+#136=EDGE_CURVE('',#183,#182,#216,.F.);
+#137=EDGE_CURVE('',#183,#181,#217,.T.);
+#138=EDGE_CURVE('',#182,#160,#218,.F.);
+#139=EDGE_CURVE('',#183,#163,#219,.F.);
+#140=EDGE_CURVE('',#184,#161,#220,.T.);
+#141=EDGE_CURVE('',#185,#184,#221,.T.);
+#142=EDGE_CURVE('',#185,#162,#222,.T.);
+#143=EDGE_CURVE('',#186,#184,#223,.T.);
+#144=EDGE_CURVE('',#187,#186,#224,.F.);
+#145=EDGE_CURVE('',#187,#185,#225,.T.);
+#146=EDGE_CURVE('',#186,#169,#226,.F.);
+#147=EDGE_CURVE('',#187,#171,#227,.F.);
+#148=EDGE_CURVE('',#157,#174,#228,.T.);
+#149=EDGE_CURVE('',#156,#172,#229,.T.);
+#150=EDGE_CURVE('',#158,#173,#230,.T.);
+#151=EDGE_CURVE('',#159,#175,#231,.T.);
+#152=EDGE_CURVE('',#165,#178,#232,.T.);
+#153=EDGE_CURVE('',#164,#176,#233,.T.);
+#154=EDGE_CURVE('',#166,#177,#234,.T.);
+#155=EDGE_CURVE('',#167,#179,#235,.T.);
+#156=VERTEX_POINT('',#484);
+#157=VERTEX_POINT('',#485);
+#158=VERTEX_POINT('',#487);
+#159=VERTEX_POINT('',#489);
+#160=VERTEX_POINT('',#492);
+#161=VERTEX_POINT('',#493);
+#162=VERTEX_POINT('',#495);
+#163=VERTEX_POINT('',#497);
+#164=VERTEX_POINT('',#500);
+#165=VERTEX_POINT('',#501);
+#166=VERTEX_POINT('',#503);
+#167=VERTEX_POINT('',#505);
+#168=VERTEX_POINT('',#509);
+#169=VERTEX_POINT('',#510);
+#170=VERTEX_POINT('',#512);
+#171=VERTEX_POINT('',#514);
+#172=VERTEX_POINT('',#517);
+#173=VERTEX_POINT('',#518);
+#174=VERTEX_POINT('',#520);
+#175=VERTEX_POINT('',#522);
+#176=VERTEX_POINT('',#525);
+#177=VERTEX_POINT('',#526);
+#178=VERTEX_POINT('',#528);
+#179=VERTEX_POINT('',#530);
+#180=VERTEX_POINT('',#534);
+#181=VERTEX_POINT('',#536);
+#182=VERTEX_POINT('',#540);
+#183=VERTEX_POINT('',#542);
+#184=VERTEX_POINT('',#549);
+#185=VERTEX_POINT('',#551);
+#186=VERTEX_POINT('',#555);
+#187=VERTEX_POINT('',#557);
+#188=LINE('',#483,#236);
+#189=LINE('',#486,#237);
+#190=LINE('',#488,#238);
+#191=LINE('',#490,#239);
+#192=LINE('',#491,#240);
+#193=LINE('',#494,#241);
+#194=LINE('',#496,#242);
+#195=LINE('',#498,#243);
+#196=LINE('',#499,#244);
+#197=LINE('',#502,#245);
+#198=LINE('',#504,#246);
+#199=LINE('',#506,#247);
+#200=LINE('',#508,#248);
+#201=LINE('',#511,#249);
+#202=LINE('',#513,#250);
+#203=LINE('',#515,#251);
+#204=LINE('',#516,#252);
+#205=LINE('',#519,#253);
+#206=LINE('',#521,#254);
+#207=LINE('',#523,#255);
+#208=LINE('',#524,#256);
+#209=LINE('',#527,#257);
+#210=LINE('',#529,#258);
+#211=LINE('',#531,#259);
+#212=LINE('',#533,#260);
+#213=LINE('',#535,#261);
+#214=LINE('',#537,#262);
+#215=LINE('',#539,#263);
+#216=LINE('',#541,#264);
+#217=LINE('',#543,#265);
+#218=LINE('',#545,#266);
+#219=LINE('',#546,#267);
+#220=LINE('',#548,#268);
+#221=LINE('',#550,#269);
+#222=LINE('',#552,#270);
+#223=LINE('',#554,#271);
+#224=LINE('',#556,#272);
+#225=LINE('',#558,#273);
+#226=LINE('',#560,#274);
+#227=LINE('',#561,#275);
+#228=LINE('',#565,#276);
+#229=LINE('',#566,#277);
+#230=LINE('',#568,#278);
+#231=LINE('',#570,#279);
+#232=LINE('',#573,#280);
+#233=LINE('',#574,#281);
+#234=LINE('',#576,#282);
+#235=LINE('',#578,#283);
+#236=VECTOR('',#399,1.);
+#237=VECTOR('',#400,1.);
+#238=VECTOR('',#401,1.);
+#239=VECTOR('',#402,1.);
+#240=VECTOR('',#403,1.);
+#241=VECTOR('',#404,1.);
+#242=VECTOR('',#405,1.);
+#243=VECTOR('',#406,1.);
+#244=VECTOR('',#407,1.);
+#245=VECTOR('',#408,1.);
+#246=VECTOR('',#409,1.);
+#247=VECTOR('',#410,1.);
+#248=VECTOR('',#413,1.);
+#249=VECTOR('',#414,1.);
+#250=VECTOR('',#415,1.);
+#251=VECTOR('',#416,1.);
+#252=VECTOR('',#417,1.);
+#253=VECTOR('',#418,1.);
+#254=VECTOR('',#419,1.);
+#255=VECTOR('',#420,1.);
+#256=VECTOR('',#421,1.);
+#257=VECTOR('',#422,1.);
+#258=VECTOR('',#423,1.);
+#259=VECTOR('',#424,1.);
+#260=VECTOR('',#427,1.);
+#261=VECTOR('',#428,1.);
+#262=VECTOR('',#429,1.);
+#263=VECTOR('',#432,1.);
+#264=VECTOR('',#433,1.);
+#265=VECTOR('',#434,1.);
+#266=VECTOR('',#437,1.);
+#267=VECTOR('',#438,1.);
+#268=VECTOR('',#441,1.);
+#269=VECTOR('',#442,1.);
+#270=VECTOR('',#443,1.);
+#271=VECTOR('',#446,1.);
+#272=VECTOR('',#447,1.);
+#273=VECTOR('',#448,1.);
+#274=VECTOR('',#451,1.);
+#275=VECTOR('',#452,1.);
+#276=VECTOR('',#459,1.);
+#277=VECTOR('',#460,1.);
+#278=VECTOR('',#463,1.);
+#279=VECTOR('',#466,1.);
+#280=VECTOR('',#471,1.);
+#281=VECTOR('',#472,1.);
+#282=VECTOR('',#475,1.);
+#283=VECTOR('',#478,1.);
+#284=EDGE_LOOP('',(#12,#13,#14,#15));
+#285=EDGE_LOOP('',(#16,#17,#18,#19));
+#286=EDGE_LOOP('',(#20,#21,#22,#23));
+#287=EDGE_LOOP('',(#24,#25,#26,#27));
+#288=EDGE_LOOP('',(#28,#29,#30,#31));
+#289=EDGE_LOOP('',(#32,#33,#34,#35));
+#290=EDGE_LOOP('',(#36,#37,#38,#39));
+#291=EDGE_LOOP('',(#40,#41,#42,#43));
+#292=EDGE_LOOP('',(#44,#45,#46,#47));
+#293=EDGE_LOOP('',(#48,#49,#50,#51));
+#294=EDGE_LOOP('',(#52,#53,#54,#55));
+#295=EDGE_LOOP('',(#56,#57,#58,#59));
+#296=EDGE_LOOP('',(#60,#61,#62,#63,#64,#65,#66,#67));
+#297=EDGE_LOOP('',(#68,#69,#70,#71,#72,#73,#74,#75));
+#298=EDGE_LOOP('',(#76,#77,#78,#79));
+#299=EDGE_LOOP('',(#80,#81,#82,#83));
+#300=EDGE_LOOP('',(#84,#85,#86,#87));
+#301=EDGE_LOOP('',(#88,#89,#90,#91));
+#302=EDGE_LOOP('',(#92,#93,#94,#95));
+#303=EDGE_LOOP('',(#96,#97,#98,#99));
+#304=EDGE_LOOP('',(#100,#101,#102,#103));
+#305=EDGE_LOOP('',(#104,#105,#106,#107));
+#306=FACE_BOUND('',#284,.T.);
+#307=FACE_BOUND('',#285,.T.);
+#308=FACE_BOUND('',#286,.T.);
+#309=FACE_BOUND('',#287,.T.);
+#310=FACE_BOUND('',#288,.T.);
+#311=FACE_BOUND('',#289,.T.);
+#312=FACE_BOUND('',#290,.T.);
+#313=FACE_BOUND('',#291,.T.);
+#314=FACE_BOUND('',#292,.T.);
+#315=FACE_BOUND('',#293,.T.);
+#316=FACE_BOUND('',#294,.T.);
+#317=FACE_BOUND('',#295,.T.);
+#318=FACE_BOUND('',#296,.T.);
+#319=FACE_BOUND('',#297,.T.);
+#320=FACE_BOUND('',#298,.T.);
+#321=FACE_BOUND('',#299,.T.);
+#322=FACE_BOUND('',#300,.T.);
+#323=FACE_BOUND('',#301,.T.);
+#324=FACE_BOUND('',#302,.T.);
+#325=FACE_BOUND('',#303,.T.);
+#326=FACE_BOUND('',#304,.T.);
+#327=FACE_BOUND('',#305,.T.);
+#328=PLANE('',#377);
+#329=PLANE('',#378);
+#330=PLANE('',#379);
+#331=PLANE('',#380);
+#332=PLANE('',#381);
+#333=PLANE('',#382);
+#334=PLANE('',#383);
+#335=PLANE('',#384);
+#336=PLANE('',#385);
+#337=PLANE('',#386);
+#338=PLANE('',#387);
+#339=PLANE('',#388);
+#340=PLANE('',#389);
+#341=PLANE('',#390);
+#342=PLANE('',#391);
+#343=PLANE('',#392);
+#344=PLANE('',#393);
+#345=PLANE('',#394);
+#346=ADVANCED_FACE('',(#306,#307,#308),#328,.T.);
+#347=ADVANCED_FACE('',(#309,#310,#311),#329,.T.);
+#348=ADVANCED_FACE('',(#312),#330,.T.);
+#349=ADVANCED_FACE('',(#313),#331,.T.);
+#350=ADVANCED_FACE('',(#314),#332,.T.);
+#351=ADVANCED_FACE('',(#315),#333,.T.);
+#352=ADVANCED_FACE('',(#316),#334,.T.);
+#353=ADVANCED_FACE('',(#317),#335,.T.);
+#354=ADVANCED_FACE('',(#318),#336,.T.);
+#355=ADVANCED_FACE('',(#319),#337,.F.);
+#356=ADVANCED_FACE('',(#320),#338,.T.);
+#357=ADVANCED_FACE('',(#321),#339,.F.);
+#358=ADVANCED_FACE('',(#322),#340,.F.);
+#359=ADVANCED_FACE('',(#323),#341,.T.);
+#360=ADVANCED_FACE('',(#324),#342,.T.);
+#361=ADVANCED_FACE('',(#325),#343,.F.);
+#362=ADVANCED_FACE('',(#326),#344,.F.);
+#363=ADVANCED_FACE('',(#327),#345,.T.);
+#364=CLOSED_SHELL('',(#346,#347,#348,#349,#350,#351,#352,#353,#354,#355,
+#356,#357,#358,#359,#360,#361,#362,#363));
+#365=STYLED_ITEM('',(#366),#373);
+#366=PRESENTATION_STYLE_ASSIGNMENT((#367));
+#367=SURFACE_STYLE_USAGE(.BOTH.,#368);
+#368=SURFACE_SIDE_STYLE('',(#369));
+#369=SURFACE_STYLE_FILL_AREA(#370);
+#370=FILL_AREA_STYLE('',(#371));
+#371=FILL_AREA_STYLE_COLOUR('',#372);
+#372=COLOUR_RGB('',0.647058823529412,0.647058823529412,0.647058823529412);
+#373=MANIFOLD_SOLID_BREP('Key',#364);
+#374=SHAPE_DEFINITION_REPRESENTATION(#586,#375);
+#375=SHAPE_REPRESENTATION('Key',(#376),#581);
+#376=AXIS2_PLACEMENT_3D('',#481,#395,#396);
+#377=AXIS2_PLACEMENT_3D('',#482,#397,#398);
+#378=AXIS2_PLACEMENT_3D('',#507,#411,#412);
+#379=AXIS2_PLACEMENT_3D('',#532,#425,#426);
+#380=AXIS2_PLACEMENT_3D('',#538,#430,#431);
+#381=AXIS2_PLACEMENT_3D('',#544,#435,#436);
+#382=AXIS2_PLACEMENT_3D('',#547,#439,#440);
+#383=AXIS2_PLACEMENT_3D('',#553,#444,#445);
+#384=AXIS2_PLACEMENT_3D('',#559,#449,#450);
+#385=AXIS2_PLACEMENT_3D('',#562,#453,#454);
+#386=AXIS2_PLACEMENT_3D('',#563,#455,#456);
+#387=AXIS2_PLACEMENT_3D('',#564,#457,#458);
+#388=AXIS2_PLACEMENT_3D('',#567,#461,#462);
+#389=AXIS2_PLACEMENT_3D('',#569,#464,#465);
+#390=AXIS2_PLACEMENT_3D('',#571,#467,#468);
+#391=AXIS2_PLACEMENT_3D('',#572,#469,#470);
+#392=AXIS2_PLACEMENT_3D('',#575,#473,#474);
+#393=AXIS2_PLACEMENT_3D('',#577,#476,#477);
+#394=AXIS2_PLACEMENT_3D('',#579,#479,#480);
+#395=DIRECTION('',(0.,0.,1.));
+#396=DIRECTION('',(1.,0.,0.));
+#397=DIRECTION('',(0.999815712121644,0.,-0.0191974423996898));
+#398=DIRECTION('',(-0.0191974423996898,0.,-0.999815712121644));
+#399=DIRECTION('',(0.0191974423996898,2.47634977110079E-16,0.999815712121644));
+#400=DIRECTION('',(0.,-1.,0.));
+#401=DIRECTION('',(0.0191974423996898,3.09543721387599E-16,0.999815712121644));
+#402=DIRECTION('',(0.,-1.,0.));
+#403=DIRECTION('',(0.,1.,0.));
+#404=DIRECTION('',(-0.0191939058472476,0.0191939058472475,-0.999631526091816));
+#405=DIRECTION('',(0.,1.,0.));
+#406=DIRECTION('',(0.0191939058472476,0.0191939058472475,0.999631526091816));
+#407=DIRECTION('',(0.,1.,0.));
+#408=DIRECTION('',(0.0191974423996898,0.,0.999815712121644));
+#409=DIRECTION('',(0.,1.,0.));
+#410=DIRECTION('',(0.0191974423996898,6.19087442775198E-17,0.999815712121644));
+#411=DIRECTION('',(-0.999815712121644,0.,-0.0191974423996896));
+#412=DIRECTION('',(-0.0191974423996896,0.,0.999815712121644));
+#413=DIRECTION('',(0.,-1.,0.));
+#414=DIRECTION('',(-0.0191939058472473,-0.0191939058472475,0.999631526091816));
+#415=DIRECTION('',(0.,-1.,0.));
+#416=DIRECTION('',(0.0191939058472473,-0.0191939058472475,-0.999631526091816));
+#417=DIRECTION('',(0.,1.,0.));
+#418=DIRECTION('',(0.0191974423996896,-2.47817639425258E-16,-0.999815712121644));
+#419=DIRECTION('',(0.,1.,0.));
+#420=DIRECTION('',(0.0191974423996896,-3.09772049281573E-16,-0.999815712121644));
+#421=DIRECTION('',(0.0191974423996896,0.,-0.999815712121644));
+#422=DIRECTION('',(0.,-1.,0.));
+#423=DIRECTION('',(0.0191974423996896,-6.19544098563145E-17,-0.999815712121644));
+#424=DIRECTION('',(0.,-1.,0.));
+#425=DIRECTION('',(-1.26236993457794E-16,-0.999815712121644,-0.0191974423996896));
+#426=DIRECTION('',(1.224421111587E-16,-0.0191974423996896,0.999815712121644));
+#427=DIRECTION('',(1.,-1.23908819712629E-16,-1.22464679914735E-16));
+#428=DIRECTION('',(-0.0191939058472473,-0.0191939058472475,0.999631526091816));
+#429=DIRECTION('',(1.,-1.23908819712629E-16,-1.22464679914735E-16));
+#430=DIRECTION('',(-0.999815712121644,0.,-0.0191974423996896));
+#431=DIRECTION('',(-0.0191974423996896,0.,0.999815712121644));
+#432=DIRECTION('',(0.,-1.,0.));
+#433=DIRECTION('',(0.0191939058472473,-0.0191939058472475,-0.999631526091816));
+#434=DIRECTION('',(0.,-1.,0.));
+#435=DIRECTION('',(1.71089370108129E-16,0.999815712121644,-0.0191974423996896));
+#436=DIRECTION('',(-1.224421111587E-16,-0.0191974423996896,-0.999815712121644));
+#437=DIRECTION('',(-1.,1.7347234759768E-16,1.22464679914735E-16));
+#438=DIRECTION('',(-1.,1.7347234759768E-16,1.22464679914735E-16));
+#439=DIRECTION('',(-1.75791387385448E-16,-0.999815712121644,-0.0191974423996896));
+#440=DIRECTION('',(1.224421111587E-16,-0.0191974423996896,0.999815712121644));
+#441=DIRECTION('',(1.,-1.7347234759768E-16,-1.22464679914735E-16));
+#442=DIRECTION('',(-0.0191939058472473,-0.0191939058472475,0.999631526091816));
+#443=DIRECTION('',(1.,-1.7347234759768E-16,-1.22464679914735E-16));
+#444=DIRECTION('',(-0.999815712121644,0.,-0.0191974423996896));
+#445=DIRECTION('',(-0.0191974423996896,0.,0.999815712121644));
+#446=DIRECTION('',(0.,-1.,0.));
+#447=DIRECTION('',(0.0191939058472473,-0.0191939058472475,-0.999631526091816));
+#448=DIRECTION('',(0.,-1.,0.));
+#449=DIRECTION('',(1.21534976180475E-16,0.999815712121644,-0.0191974423996896));
+#450=DIRECTION('',(-1.224421111587E-16,-0.0191974423996896,-0.999815712121644));
+#451=DIRECTION('',(-1.,1.23908819712629E-16,1.22464679914735E-16));
+#452=DIRECTION('',(-1.,1.23908819712629E-16,1.22464679914735E-16));
+#453=DIRECTION('',(-1.22464679914735E-16,0.,-1.));
+#454=DIRECTION('',(-1.,0.,1.22464679914735E-16));
+#455=DIRECTION('',(-1.22464679914735E-16,0.,-1.));
+#456=DIRECTION('',(-1.,0.,1.22464679914735E-16));
+#457=DIRECTION('',(4.75746485849342E-18,1.,-2.47771969638269E-16));
+#458=DIRECTION('',(0.,2.47771969638269E-16,1.));
+#459=DIRECTION('',(-0.999815712121644,0.,-0.0191974423996896));
+#460=DIRECTION('',(-0.999815712121644,0.,-0.0191974423996896));
+#461=DIRECTION('',(-0.0191974423996896,0.,0.999815712121644));
+#462=DIRECTION('',(0.999815712121644,0.,0.0191974423996896));
+#463=DIRECTION('',(-0.999815712121644,0.,-0.0191974423996896));
+#464=DIRECTION('',(5.94683107311678E-18,1.,-3.09714962047836E-16));
+#465=DIRECTION('',(0.,3.09714962047836E-16,1.));
+#466=DIRECTION('',(-0.999815712121644,0.,-0.0191974423996896));
+#467=DIRECTION('',(-0.0191974423996896,0.,0.999815712121644));
+#468=DIRECTION('',(0.999815712121644,0.,0.0191974423996896));
+#469=DIRECTION('',(0.0191974423996896,0.,-0.999815712121644));
+#470=DIRECTION('',(-0.999815712121644,0.,-0.0191974423996896));
+#471=DIRECTION('',(-0.999815712121644,0.,-0.0191974423996896));
+#472=DIRECTION('',(-0.999815712121644,0.,-0.0191974423996896));
+#473=DIRECTION('',(0.,1.,0.));
+#474=DIRECTION('',(0.,0.,1.));
+#475=DIRECTION('',(-0.999815712121644,0.,-0.0191974423996896));
+#476=DIRECTION('',(0.0191974423996896,0.,-0.999815712121644));
+#477=DIRECTION('',(-0.999815712121644,0.,-0.0191974423996896));
+#478=DIRECTION('',(-0.999815712121644,0.,-0.0191974423996896));
+#479=DIRECTION('',(1.18936621462336E-18,1.,-6.19429924095673E-17));
+#480=DIRECTION('',(0.,6.19429924095673E-17,1.));
+#481=CARTESIAN_POINT('',(0.,0.,0.));
+#482=CARTESIAN_POINT('',(0.038,-0.00479628521436825,0.015));
+#483=CARTESIAN_POINT('',(0.038,-0.00244964783238247,0.015));
+#484=CARTESIAN_POINT('',(0.0378237941746557,-0.00244964783238247,0.0058230821023574));
+#485=CARTESIAN_POINT('',(0.0377565535643063,-0.00244964783238247,0.00232114589021863));
+#486=CARTESIAN_POINT('',(0.0378237941746557,-0.00479628521436825,0.0058230821023574));
+#487=CARTESIAN_POINT('',(0.0378237941746557,-0.00084964783238247,0.00582308210235741));
+#488=CARTESIAN_POINT('',(0.038,-0.000849647832382467,0.015));
+#489=CARTESIAN_POINT('',(0.0377565535643063,-0.000849647832382471,0.00232114589021863));
+#490=CARTESIAN_POINT('',(0.0377565535643063,-0.00479628521436825,0.00232114589021863));
+#491=CARTESIAN_POINT('',(0.038,-0.00479628521436825,0.015));
+#492=CARTESIAN_POINT('',(0.038,0.006,0.015));
+#493=CARTESIAN_POINT('',(0.038,-0.006,0.015));
+#494=CARTESIAN_POINT('',(0.0379995565442246,-0.0059995565442246,0.0149769045249545));
+#495=CARTESIAN_POINT('',(0.0377119852863841,-0.00571198528638415,-3.46944695195361E-18));
+#496=CARTESIAN_POINT('',(0.0377119852863841,-0.00479628521436825,-3.46944695195361E-18));
+#497=CARTESIAN_POINT('',(0.0377119852863841,0.00571198528638414,-3.46944695195361E-18));
+#498=CARTESIAN_POINT('',(0.0379960225835153,0.00599602258351532,0.0147928534743205));
+#499=CARTESIAN_POINT('',(0.0378237941746557,-0.00479628521436825,0.0058230821023574));
+#500=CARTESIAN_POINT('',(0.0378237941746557,0.00235035216761753,0.0058230821023574));
+#501=CARTESIAN_POINT('',(0.0378237941746557,0.00075035216761753,0.0058230821023574));
+#502=CARTESIAN_POINT('',(0.038,0.00235035216761753,0.015));
+#503=CARTESIAN_POINT('',(0.0377565535643063,0.00235035216761753,0.00232114589021863));
+#504=CARTESIAN_POINT('',(0.0377565535643063,-0.00479628521436825,0.00232114589021863));
+#505=CARTESIAN_POINT('',(0.0377565535643063,0.00075035216761753,0.00232114589021863));
+#506=CARTESIAN_POINT('',(0.038,0.00075035216761753,0.015));
+#507=CARTESIAN_POINT('',(0.035,-0.00479628521436825,0.015));
+#508=CARTESIAN_POINT('',(0.035,-0.00479628521436825,0.015));
+#509=CARTESIAN_POINT('',(0.035,0.00340742957126349,0.015));
+#510=CARTESIAN_POINT('',(0.035,-0.00359257042873651,0.015));
+#511=CARTESIAN_POINT('',(0.0349969777020729,0.00340440727333638,0.0151574033088017));
+#512=CARTESIAN_POINT('',(0.0352880147136159,0.00369544428487935,-3.46944695195361E-18));
+#513=CARTESIAN_POINT('',(0.0352880147136159,-0.00479628521436825,-3.46944695195361E-18));
+#514=CARTESIAN_POINT('',(0.0352880147136159,-0.00388058514235236,-3.46944695195361E-18));
+#515=CARTESIAN_POINT('',(0.0350004434557754,-0.00359301388451191,0.0149769045249545));
+#516=CARTESIAN_POINT('',(0.0351771815723063,-0.00164964783238247,0.00577226454430955));
+#517=CARTESIAN_POINT('',(0.0351771815723063,-0.00244964783238247,0.00577226454430955));
+#518=CARTESIAN_POINT('',(0.0351771815723063,-0.00084964783238247,0.00577226454430956));
+#519=CARTESIAN_POINT('',(0.0352107770965057,-0.00244964783238247,0.00402258704809668));
+#520=CARTESIAN_POINT('',(0.0352443726207051,-0.00244964783238247,0.0022729095518838));
+#521=CARTESIAN_POINT('',(0.0352443726207051,-0.00164964783238247,0.0022729095518838));
+#522=CARTESIAN_POINT('',(0.0352443726207051,-0.000849647832382471,0.0022729095518838));
+#523=CARTESIAN_POINT('',(0.0352107770965057,-0.000849647832382471,0.00402258704809668));
+#524=CARTESIAN_POINT('',(0.0352107770965057,0.00235035216761753,0.00402258704809668));
+#525=CARTESIAN_POINT('',(0.0351771815723063,0.00235035216761753,0.00577226454430955));
+#526=CARTESIAN_POINT('',(0.0352443726207051,0.00235035216761753,0.0022729095518838));
+#527=CARTESIAN_POINT('',(0.0351771815723063,0.00155035216761753,0.00577226454430955));
+#528=CARTESIAN_POINT('',(0.0351771815723063,0.00075035216761753,0.00577226454430955));
+#529=CARTESIAN_POINT('',(0.0352107770965057,0.00075035216761753,0.00402258704809668));
+#530=CARTESIAN_POINT('',(0.0352443726207051,0.00075035216761753,0.0022729095518838));
+#531=CARTESIAN_POINT('',(0.0352443726207051,0.00155035216761753,0.0022729095518838));
+#532=CARTESIAN_POINT('',(0.028,0.00340742957126349,0.015));
+#533=CARTESIAN_POINT('',(0.028,0.00340742957126349,0.015));
+#534=CARTESIAN_POINT('',(0.028,0.00340742957126349,0.015));
+#535=CARTESIAN_POINT('',(0.0279969777020729,0.00340440727333638,0.0151574033088017));
+#536=CARTESIAN_POINT('',(0.0282880147136159,0.00369544428487935,0.));
+#537=CARTESIAN_POINT('',(0.028,0.00369544428487935,0.));
+#538=CARTESIAN_POINT('',(0.028,-0.00479628521436825,0.015));
+#539=CARTESIAN_POINT('',(0.028,-0.00479628521436825,0.015));
+#540=CARTESIAN_POINT('',(0.028,0.006,0.015));
+#541=CARTESIAN_POINT('',(0.0280039774164847,0.00599602258351532,0.0147928534743205));
+#542=CARTESIAN_POINT('',(0.0282880147136159,0.00571198528638415,0.));
+#543=CARTESIAN_POINT('',(0.0282880147136159,-0.00479628521436825,0.));
+#544=CARTESIAN_POINT('',(0.028,0.006,0.015));
+#545=CARTESIAN_POINT('',(0.028,0.006,0.015));
+#546=CARTESIAN_POINT('',(0.028,0.00571198528638415,0.));
+#547=CARTESIAN_POINT('',(0.028,-0.006,0.015));
+#548=CARTESIAN_POINT('',(0.028,-0.006,0.015));
+#549=CARTESIAN_POINT('',(0.028,-0.006,0.015));
+#550=CARTESIAN_POINT('',(0.0280004434557754,-0.0059995565442246,0.0149769045249545));
+#551=CARTESIAN_POINT('',(0.0282880147136159,-0.00571198528638415,0.));
+#552=CARTESIAN_POINT('',(0.028,-0.00571198528638415,0.));
+#553=CARTESIAN_POINT('',(0.028,-0.00479628521436825,0.015));
+#554=CARTESIAN_POINT('',(0.028,-0.00479628521436825,0.015));
+#555=CARTESIAN_POINT('',(0.028,-0.0035925704287365,0.015));
+#556=CARTESIAN_POINT('',(0.0280004434557754,-0.00359301388451191,0.0149769045249545));
+#557=CARTESIAN_POINT('',(0.0282880147136159,-0.00388058514235236,0.));
+#558=CARTESIAN_POINT('',(0.0282880147136159,-0.00479628521436825,0.));
+#559=CARTESIAN_POINT('',(0.028,-0.0035925704287365,0.015));
+#560=CARTESIAN_POINT('',(0.028,-0.0035925704287365,0.015));
+#561=CARTESIAN_POINT('',(0.028,-0.00388058514235236,0.));
+#562=CARTESIAN_POINT('',(0.033,-1.7347234759768E-18,0.));
+#563=CARTESIAN_POINT('',(0.033,-1.7347234759768E-18,0.015));
+#564=CARTESIAN_POINT('',(0.0902379003643203,-0.00244964783238247,0.00507916179136892));
+#565=CARTESIAN_POINT('',(0.0902714958885197,-0.00244964783238247,0.00332948429515604));
+#566=CARTESIAN_POINT('',(0.0902043048401208,-0.00244964783238247,0.0068288392875818));
+#567=CARTESIAN_POINT('',(0.0902043048401208,-0.00164964783238247,0.0068288392875818));
+#568=CARTESIAN_POINT('',(0.0902043048401208,-0.00084964783238247,0.0068288392875818));
+#569=CARTESIAN_POINT('',(0.0902379003643203,-0.000849647832382471,0.00507916179136892));
+#570=CARTESIAN_POINT('',(0.0902714958885197,-0.000849647832382471,0.00332948429515604));
+#571=CARTESIAN_POINT('',(0.0902714958885197,-0.00164964783238247,0.00332948429515604));
+#572=CARTESIAN_POINT('',(0.0902043048401208,0.00155035216761753,0.0068288392875818));
+#573=CARTESIAN_POINT('',(0.0902043048401208,0.00075035216761753,0.0068288392875818));
+#574=CARTESIAN_POINT('',(0.0902043048401208,0.00235035216761753,0.0068288392875818));
+#575=CARTESIAN_POINT('',(0.0902379003643203,0.00235035216761753,0.00507916179136892));
+#576=CARTESIAN_POINT('',(0.0902714958885197,0.00235035216761753,0.00332948429515604));
+#577=CARTESIAN_POINT('',(0.0902714958885197,0.00155035216761753,0.00332948429515604));
+#578=CARTESIAN_POINT('',(0.0902714958885197,0.00075035216761753,0.00332948429515604));
+#579=CARTESIAN_POINT('',(0.0902379003643203,0.00075035216761753,0.00507916179136892));
+#580=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#365),
+#581);
+#581=(
+GEOMETRIC_REPRESENTATION_CONTEXT(3)
+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#582))
+GLOBAL_UNIT_ASSIGNED_CONTEXT((#585,#584,#583))
+REPRESENTATION_CONTEXT('Key','TOP_LEVEL_ASSEMBLY_PART')
+);
+#582=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.E-6),#585,
+'DISTANCE_ACCURACY_VALUE','Maximum Tolerance applied to model');
+#583=(
+NAMED_UNIT(*)
+SI_UNIT($,.STERADIAN.)
+SOLID_ANGLE_UNIT()
+);
+#584=(
+NAMED_UNIT(*)
+PLANE_ANGLE_UNIT()
+SI_UNIT($,.RADIAN.)
+);
+#585=(
+LENGTH_UNIT()
+NAMED_UNIT(*)
+SI_UNIT($,.METRE.)
+);
+#586=PRODUCT_DEFINITION_SHAPE('','',#587);
+#587=PRODUCT_DEFINITION('','',#589,#588);
+#588=PRODUCT_DEFINITION_CONTEXT('',#595,'design');
+#589=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','',#591,
+ .NOT_KNOWN.);
+#590=PRODUCT_RELATED_PRODUCT_CATEGORY('','',(#591));
+#591=PRODUCT('Key','Key','Key',(#593));
+#592=PRODUCT_CATEGORY('','');
+#593=PRODUCT_CONTEXT('',#595,'mechanical');
+#594=APPLICATION_PROTOCOL_DEFINITION('international standard',
+'ap242_managed_model_based_3d_engineering',2011,#595);
+#595=APPLICATION_CONTEXT('managed model based 3d engineering');
+ENDSEC;
+END-ISO-10303-21;