From 13f6de8c729e0409dce7ccbb028eddd24dc2c848 Mon Sep 17 00:00:00 2001
From: Ferdi Mac <70595970+Ferdi360@users.noreply.github.com>
Date: Sat, 30 Dec 2023 10:53:02 +0100
Subject: [PATCH 1/2] Create README.md

---
 printer_mods/Ferdi360/2.4 Backplates/README.md | 1 +
 1 file changed, 1 insertion(+)
 create mode 100644 printer_mods/Ferdi360/2.4 Backplates/README.md

diff --git a/printer_mods/Ferdi360/2.4 Backplates/README.md b/printer_mods/Ferdi360/2.4 Backplates/README.md
new file mode 100644
index 000000000..b76ea717f
--- /dev/null
+++ b/printer_mods/Ferdi360/2.4 Backplates/README.md	
@@ -0,0 +1 @@
+#Backplates for Voron 2.4

From 5389eea8df8f2ace357bd70b0588b27602b5c7a2 Mon Sep 17 00:00:00 2001
From: Ferdi Mac <70595970+Ferdi360@users.noreply.github.com>
Date: Sat, 30 Dec 2023 10:54:28 +0100
Subject: [PATCH 2/2] Update README.md

---
 printer_mods/Ferdi360/2.4 Backplates/README.md | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/printer_mods/Ferdi360/2.4 Backplates/README.md b/printer_mods/Ferdi360/2.4 Backplates/README.md
index b76ea717f..0cf9c5a60 100644
--- a/printer_mods/Ferdi360/2.4 Backplates/README.md	
+++ b/printer_mods/Ferdi360/2.4 Backplates/README.md	
@@ -1 +1,17 @@
-#Backplates for Voron 2.4
+# Backplates for Voron 2.4
+**What is it?**
+Backplates for your Voron 2.4 that block hot air out of your bedfans from blowing onto your ACM panels to (slightly) improve airflow and temps. Also a nice way to showoff Voron branding and the serial of your printer.
+
+I noticed a hotspot on the lower third of the ACM backpanel, which now gets more equally warm. Also the top panel gets warmer sooner, which indicated improved flow for me. Good insulation still is vital to keep the temp in the printer! 
+
+**IMPORTANT NOTICE:**
+If you have standard bed spacers (8 mm), a magnet+PEI sheet and the normal Stealthburner toolhead, you should have 6 mm margin between the gantry and the backplate. 
+You should also make sure you have managed your AB motor cables (and connectors if you added those), so they don't get crushed.
+
+**Instructions:**
+The STL's are “blank” plates without serial numbers. I added a Fusion360 file in which you can edit the text in the similar named sketch. 
+Print with 3 perimeters and 1% infill. If you do a color change after layer one, you get a nice effect. 
+Stick on a bit of 1mm foam tape (BOM for the back and top panel) to prevent it from resonating against the back panel.
+Mount it with a few (according to size) 8mm M3 SHCS and hammerhead t-nuts.
+
+I have tested on a 350 2.4, i would love to hear if the smaller sizes work well too!