Move some mods to orphaned, clarify readmes, fix/add STLs & CAD (#994)

Co-authored-by: Alan Ho <alanho@gmail.com>

orphaned_mods/printer_mods/Maverick/V0.2_Handles/README.md

@@ -1,37 +1,37 @@
-# V0.2 Handles
-![Handle1](Images/Handle_1.jpeg)
-### Add handles to the extrusion tophat so you can sling that thing around. Easy to install, just follow the below steps. 
-
-### *NOTE - remove the top panel before you proceed. Replace panel once install is complete.*  
-</br>
-</br>
-
-## Step 1  
----
-### Insert "Part A" into extrusion, vertically.
-![1](Images/1.png)
-</br>
-</br>
-</br>
-
-## Step 2
----
-### Insert "Part B" into extrusion, horizontally (after you've installed the logo insert).
-![2](Images/2.png)
-</br>
-</br>
-</br>
-
-## Step 3
----
-### Bolt that bad boy on.
-![3](Images/3.png)
-</br>
-</br>
-### That's it! Replace your top panel and get back in the game.
-</br>
-</br>
-
-
-![Handle2](Images/Handle_2.png)
+# V0.2 Handles
+![Handle1](Images/Handle_1.jpeg)
+### Add handles to the extrusion tophat so you can sling that thing around. Easy to install, just follow the below steps. 
+
+### *NOTE - remove the top panel before you proceed. Replace panel once install is complete.*  
+</br>
+</br>
+
+## Step 1  
+---
+### Insert "Part A" into extrusion, vertically.
+![1](Images/1.png)
+</br>
+</br>
+</br>
+
+## Step 2
+---
+### Insert "Part B" into extrusion, horizontally (after you've installed the logo insert).
+![2](Images/2.png)
+</br>
+</br>
+</br>
+
+## Step 3
+---
+### Bolt that bad boy on.
+![3](Images/3.png)
+</br>
+</br>
+### That's it! Replace your top panel and get back in the game.
+</br>
+</br>
+
+
+![Handle2](Images/Handle_2.png)
 ![Handle3](Images/Handle_3.png)

orphaned_mods/printer_mods/README.md

@@ -17,7 +17,11 @@ Pull requests can be generated against these mods by anyone, ignoring the normal
 
 | Original Author | Mod title | Description | V0 | V1.8 | V2.4 | VSW | Trident |
 | --- | --- | --- | --- | --- | --- | --- | --- |
+| 42bios |[LED mount](./42bios/LED_mount)|AngryLED - LED-mount for Lumentech LT3 profiles. |:x:|:grey_question:|:heavy_check_mark:|:x:|
+| Badnoob |[Rail Alignment](./Badnoob/Rail_Alignment)|Tools and procedure to properly align the rails in 2.4 and Afterburner|:x:|:x:|:heavy_check_mark:|:x:|
+| Chaoticlab | [Tool_free_tensioner](./Chaoticlab/Tool_free_tensioner) | Tool-free tensioner for Z-Axis | :x: | :x: | :heavy_check_mark: | :x: |
 |edwardyeeks |[Decontaminator Purge Bucket & Nozzle Scrubber](./edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber) |Removeable purge bucket with nozzle scrubber |:x: |:heavy_check_mark: |:heavy_check_mark: |:x:|
 | |[V2.4 Z Drive Motor Tensioner Mod](edwardyeeks/V2.4_z_drive_motor_tensioner_mod) |Braced motor tensioner for z drive |:x: |:x: |:heavy_check_mark: |:x:|
 |MarcPot |[UHP PSU Bracket Clip](./MarcPot/UHP_PSU_Bracket_Clip)|DIN rail mount for the Mean Well UHP series PSU. |:grey_question: |:grey_question: |:heavy_check_mark: |:x:|
-| |[Hour Counter Skirt + Keystone Skirt](./MarcPot/Skirt_Mods)|Skirt mod for a mechanical hour counter and keystone inserts | :x: |:x: |:heavy_check_mark: |:x:|
+| |[Hour Counter Skirt + Keystone Skirt](./MarcPot/Skirt_Mods)|Skirt mod for a mechanical hour counter and keystone inserts | :x: |:x: |:heavy_check_mark: |:x:|
+|Maverick| [V0.2 Handles](./Maverick/V0.2_Handles) | Add handles to the extrusion tophat | :heavy_check_mark: | :x: | :x: |:x:| :x:|

printer_mods/alanho/BTT_PITFT50_v2_Mount/README.md

@@ -1,3 +1,11 @@
+# Note this mod is only compatible with the v2.0 version of the PITFT50**
+
+See the following two models for v2.1 compatibility
+- https://www.printables.com/model/514367-tft-5-holder-for-voron-24-btt-pitft50-v21
+- https://www.printables.com/model/537886-btt-pi-tft50-v21-screen-mount-for-voron-skirts_rem
+
+Refer to [this discussion](https://github.com/VoronDesign/VoronUsers/issues/993) to determine which one suits your needs best.
+
 # BTT PITFT50 v2 Mount
 
 This work is based on [sttts's Waveshare 5.5inch mount](../../sttts/Waveshare-5.5-inch-HDMI-AMOLED). BTT PITFT50 v2 has a different layout than v1, featuing a brightless thumbwheel, an orientation switch and a JST XH port for unknown function. This design provide accessibility to the thumbwheel and switch.

printer_mods/samwiseg0/lrs_screw_terminal_cover/README.md

@@ -10,8 +10,14 @@ Designed to cover the screw terminals for several LRS style PSUs. Other Meanwell
 ### Compatibility List
 
 * LRS-50
+* LRS-150
 * LRS-200
 
 ![LRS-50 Screw Terminal Cover](Images/lrs_50_screw_terminal_cover.png)
 
 ![LRS-200 Screw Terminal Cover](Images/lrs_200_screw_terminal_cover.png)
+
+
+### Acknowledgements
+
+Fixes to the LRS-200 cover graciously provided by @wrwindsor #829

printer_mods/togi/exhaust_housing_side_fitting/README.md

@@ -1,5 +1,7 @@
 # Exhaust housing with the bowden fitting moved to the side
 
+**Note: Not compatible with V2.4r2**
+
 Moves the bowden fitting on the exhaust housing 90 degrees and to one side of the housing. This allows the printer to stand with its back closer to a wall. The only thing that has been changed from the original is the location of the bowden fitting.
 
 If you want the bowden to be on the other side your printer, just mirror the model in your slicer.