zach
/
VoronUsers
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Added 10x11 Befenybay Drag Chain Top Anchor

This commit is contained in:
bryansj 2020-01-06 07:04:48 -05:00
parent c30390545e
commit 19de62899c
5 changed files with 2417 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
printer_mods/README.md
View File

@ -30,6 +30,7 @@ If your mod is lacking a column in the compatibility matrix, feel free to submit
| | [Corner Panel Clip](./ArmyAg08/Panels)|Corner panel clip that fit 3mm or 1/8" panels with foam tape | :x:|:heavy_check_mark: | :heavy_check_mark:|
| bryansj | [Rotated Pi Mount with Heatsink](./bryansj/RPi_Frame_with_Heatsink_90deg) | Raspberry Pi with Heatsink Frame for minimal channel width | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |
| | [Keystone Jack Universal Skirt Insert](./bryansj/Keystone_Jack_Universal_Skirt_Insert) | Keystone Jack Insert to fit into any hexagonal hole in the skirt | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |
| | [10x11 Befenybay Drag Chain Top Anchor](./bryansj/10x11_Befenybay_Chain_Top_Anchor) | Befenybay 10x11 Drag Chain Top Anchor | :x: | :heavy_check_mark: | :heavy_check_mark: |
| blamm | [Blind Joint Drilling Jigs](./blamm/jigs) | Jigs to drill your blind joints in the right spot | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |
| Cerulean | [Respooler](./Cerulean/Respooler) | Respool tangled spools or bad koils | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |
|Danowar |[Dual Mobius Mount](./Danowar/Dual_Mobuis_Mount) | Mounts two Mobius Extruders to the back of the printer| :heavy_check_mark:| :heavy_check_mark:|:heavy_check_mark: |

BIN
printer_mods/bryansj/10x11_Befenybay_Chain_Top_Anchor/10x11_Befenybay_Chain_Top_Anchor.CATPart Normal file
View File

Binary file not shown.

BIN
printer_mods/bryansj/10x11_Befenybay_Chain_Top_Anchor/10x11_Befenybay_Chain_Top_Anchor.stl Normal file
View File

Binary file not shown.

2411
printer_mods/bryansj/10x11_Befenybay_Chain_Top_Anchor/10x11_Befenybay_Chain_Top_Anchor.stp Normal file
View File

File diff suppressed because it is too large Load Diff

5
printer_mods/bryansj/10x11_Befenybay_Chain_Top_Anchor/readme.md Normal file
View File

@ -0,0 +1,5 @@
This is a mount for the Befenybay (and maybe other) 10mm x 11mm Drag Chain from Amazon found here https://www.amazon.com/gp/product/B07QLGWQ1L (10mmx11mm-Outside Open).
These are to replace the similar parts of the Zip Chain installation.
The part may need to be mirrored depending on the application. One half has smaller holes that you will screw into and the other will have clearance holes for M3.