diff --git a/firmware_configurations/klipper/bryansj/Readme.md b/firmware_configurations/klipper/bryansj/Readme.md
new file mode 100644
index 000000000..c9c0b370a
--- /dev/null
+++ b/firmware_configurations/klipper/bryansj/Readme.md
@@ -0,0 +1,21 @@
+This is my modded version of Eddie's SKR Klipper config file.
+
+# Voron Design VORON2.2 V2.291 300mm SKR 1.3 TMC2209 UART config
+# Based on Eddie's template and guide from:
+# github.com/VoronDesign/VoronUsers/tree/master/firmware_configurations/klipper/eddie
+# with the following adjustments and additions from bryansj:
+#   RepRapDiscount 128x64 Full Graphic Smart Controller
+#   Nozzle Wipe
+#       added to G32
+#   Prime Line
+#   Extended QGL corner points
+#   Bed Meshing (Commented Out)
+#   TL Filament Run-out Sensor
+#   Chamber Temperature Thermistor (in Z vertical Chain)
+#       linked to Back Panel Exhaust fan 
+#   Force Move Enabled
+#   Pause/Resume Enabled
+#   Homing IF/THEN to omit unneeded homing operations
+#   M117 LCD Text Added *16 Characters Max
+#   Expanded LCD Menu Options for Voron/Klipper Commands
+#       Quad Gantry Level, Firmware_Restart, TESTZ Offsetting
\ No newline at end of file