V0 Sherpa Mini Direct Drive Mod by kirby (#153)

printer_mods/README.md

@@ -53,6 +53,7 @@ like so:
 | |[Din Rail mount](./hijax_pl/din_rail_mount) |Adapter to attach DIN Rail to 2020 extrusion. |:x: |:x: |:heavy_check_mark: |
 | |[Controler Board adapters](./hijax_pl/ender_compatible_controller_mount) |DIN (rotated) and legacy adapters for boards like SKR mini E3. |:grey_question: |:x: |:heavy_check_mark: |
 |jasonc |[V2.4 Z-Idler Shoulder Bolt Mod](./jasonc/Z_Idler_Shoulder_Bolt) |Modification to the idler carriers to accept a 25mm shoulder bolt. Ideal for Gates idlers. |:x: |:x: |:heavy_check_mark: |
+| kirby | [V0 Sherpa Mini Direct Drive Mod](./kirby/v0_sherpa_mini_direct_drive)| A direct drive mod for the V0 using the Annex Sherpa Mini extruder | :heavy_check_mark: | :x: | :x: |
 |Kruppes |[V0 Printed Deck with inserts](./Kruppes/Deck_Panel_inserts_logo) |Electronics Deck Panel using brass heat inserts. Optional with accent color Voron Logo. |:heavy_check_mark: |:x: |:x: |
 |littleferris |[V0 c14 Skirt Inlet](./littleferris/V0_Skirt_Inlet) |V0 C14 Skirt inlet |:heavy_check_mark: |:x: |:x: |
 |madros |[V0 OLED-skirt](./madros/V0_skirt_OLED) |V0 skirt with 0.96" OLED|:heavy_check_mark: |:x: |:x: |

printer_mods/kirby/v0_sherpa_mini_direct_drive/README.md

@@ -0,0 +1,12 @@
+# V0 Sherpa Mini Direct Drive Mod
+
+## Requirements
+ - Printed parts included in STL
+ - One fully assembled Annex Sherpa Mini (see: https://github.com/Annex-Engineering/Sherpa_Mini-Extruder )
+ 
+## Notes
+This is a direct drive mod using the Annex Sherpa Mini. The existing pocketwatch extruder can be broken down to use the TL BMG guts, if desired, for the Sherpa Mini.
+
+Wire routing should be merged together in the slot provided, and wires should exit behind the motor.
+
+Note: This hotend mod is for the Dragon hotend only. Feel free to modify for V6/Mosquito if desired. Fan shrouds should be identical.