diff --git a/printer_mods/120decibell/huvud_chain_mount/README.md b/printer_mods/120decibell/huvud_chain_mount/README.md
new file mode 100644
index 000000000..7846b5198
--- /dev/null
+++ b/printer_mods/120decibell/huvud_chain_mount/README.md
@@ -0,0 +1,27 @@
+<h2>Huvud Cable Chain Mount</h2>
+
+A mount for the Huvud toolhead board that mounts on the back for cleaner wiring but still allows for the use of a cable chain. Moves the assembly 6mm up to clear the chain at X0 as it rises onto the X joint.  Has space for airflow between the motor and the Huvud to keep temperatures reasonable and includes a wire tie spot for wires coming out of the chain.  Current only configured for 3-bolt generic chains. Works for both Clockwork and LGX.
+
+Parts Required:
+
+* (3) M3 heat set inserts for the chain
+* (3) M3x6 FHCS to mount the chain
+* (2) M3x25 BHCS to mount to the motor
+* (4) M3x8 SHCS to mount the Huvud.
+
+Installation:
+
+* Remove the printed support.
+* Install the 3 heat set inserts.
+* Remove the upper two screws of the motor.
+* Install the mount with the two M3x25 BHCS.
+* Attach the Huvud with the four M3x8 SHCS.  The screws will thread into the plastic. _Be sure to check clearance between electrical components and the M3 BHCS screws underneath_
+* Attach the chain with the three M3x6 FHCS.
+
+Designed for the Trident but will also work on a V2.4, just be conscious of clearance to the Z chain.
+
+![](./images/huvud_chain_mount.png)
+
+![](./images/huvud_mount_install1.png)
+
+![](./images/huvud_mount_install2.png)
diff --git a/printer_mods/120decibell/huvud_chain_mount/STL/huvud_chain_mount.stl b/printer_mods/120decibell/huvud_chain_mount/STL/huvud_chain_mount.stl
new file mode 100644
index 000000000..8381cce01
Binary files /dev/null and b/printer_mods/120decibell/huvud_chain_mount/STL/huvud_chain_mount.stl differ
diff --git a/printer_mods/120decibell/huvud_chain_mount/images/huvud_chain_mount.png b/printer_mods/120decibell/huvud_chain_mount/images/huvud_chain_mount.png
new file mode 100644
index 000000000..9ed25133e
Binary files /dev/null and b/printer_mods/120decibell/huvud_chain_mount/images/huvud_chain_mount.png differ
diff --git a/printer_mods/120decibell/huvud_chain_mount/images/huvud_mount_install1.png b/printer_mods/120decibell/huvud_chain_mount/images/huvud_mount_install1.png
new file mode 100644
index 000000000..1d938b365
Binary files /dev/null and b/printer_mods/120decibell/huvud_chain_mount/images/huvud_mount_install1.png differ
diff --git a/printer_mods/120decibell/huvud_chain_mount/images/huvud_mount_install2.png b/printer_mods/120decibell/huvud_chain_mount/images/huvud_mount_install2.png
new file mode 100644
index 000000000..57c272580
Binary files /dev/null and b/printer_mods/120decibell/huvud_chain_mount/images/huvud_mount_install2.png differ
diff --git a/printer_mods/README.md b/printer_mods/README.md
index 00f68992e..3ca4441a5 100644
--- a/printer_mods/README.md
+++ b/printer_mods/README.md
@@ -26,6 +26,7 @@ like so:
 | Creator | Mod title | Description | V0 | V1.8 | V2.4 | VSW | Trident |
 | --- | --- | --- | --- | --- | --- | --- | --- |
 |120decibell|[Side entry exhaust housing](./120decibell/exhaust_housing_side_entry)| Exhaust housing with dual cover screws and single or dual side entry filament paths. |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:|:heavy_check_mark:|
+||[Huvud Chain Mount](./120decibell/huvud_chain_mount)| Huvud rear mount for Clockwork or LGX that supports a cable chain. |:x:|:heavy_check_mark:|:grey_question:|:x:|:heavy_check_mark:|
 |42bios|[Corner panel clip w. cable](./42bios/corner_panel_clip_cable)| Corner panel clip with an internal cable path. |:x:|:grey_question:|:heavy_check_mark:|:x:|
 | |[Exhaust filter housing - side thread](./42bios/exhaust_filter_housing_side)|Exhaust filter housing with the G1-8 "thread on the side. |:x:|:grey_question:|:heavy_check_mark:|:x:|
 | |[LED mount](./42bios/LED_mount)|AngryLED - LED-mount for Lumentech LT3 profiles. |:x:|:grey_question:|:heavy_check_mark:|:x:|